Related
--
thats how mine is but in the bottom. not a big deal but i did feel it
several people reported the same thing before. screen not flush all the way around. there's no adhesive, the screen slides out of the outer sleeve if you remove the screws in back.
Oh...
--
mine does it on the bottom.
it feels like there is a slight gap in between the bottom bezel and the screen.
It's not a problem at all, but it sure is annoying at times.
On the left side of my HD2 the screen is easier to push in at the top and bottom, but it takes a lot of pressure to make it "squeak".
If I had a cosmetic issue, you can bet I would be on a waiting list to get a replacement. The looks on these phones are nearly as important as the performance, IMHO.
oh i deff agree, @op, if you only just got it id be trying to take it back.
Same on mine at the bottom - just barely - if you slightly press between the usb and headphone jack you hear a slight (guess it sounds like) a click and you feel it slightly move. When the usb jack is plugged in it stops Some play and I don't think its worth returning - also don't think it will get worse. Case materials should have been a little more rigid. Think if you get a hard shell case or aluminum skin - when they become available you won't notice it. Talking to other guys with the HTC branded Euro version their build quality is a bit better. Think its pretty much the same with all HTC stuff - their branded models (TYTN TYTN II etc.) were build better than the AT&T versions - they also cost a lot more because they aren't subsidized.
Personally feel the HD2 of all the MS phones with the exception of the HTC TYTN I is the most solid. The Fuze which I just got rid of was probably the worst. The case was ok but the front keypad was pure junk - out of the box the thing felt like it was going to break and it never sat "square" in its opening. The USB ports on all of them were really weak and were super loose out of the box. The slide out keyboards always loosened up and had too much play.
stim141 said:
Personally feel the HD2 of all the MS phones with the exception of the HTC TYTN I is the most solid. The Fuze which I just got rid of was probably the worst. The case was ok but the front keypad was pure junk - out of the box the thing felt like it was going to break and it never sat "square" in its opening. The USB ports on all of them were really weak and were super loose out of the box. The slide out keyboards always loosened up and had too much play.
Click to expand...
Click to collapse
For me, the Touch Pro 2 has top honors when it comes to "feeling" solid. My sister dropped it the other day and cracked the bevel, with a large triangle missing near the volume rocker and three other cracks on the bottom, top and opposite side.
I am encouraging her to return it and claim the insurance, but since there is no change in the quality of the phone's operation, she wants to keep it.
Again, for me, the TP2 seems more solid than the HD2, but the HD2 is very well-built compared to other phones. I am so paranoid about even putting my phone down on a hard surface, due to the sharp edges of the camera mount and the light metal case.
I will be installing my new invisibleSHEILD as soon as sirphunkee and I can make the time to meet somewhere clean (I have a 2yo at home ). I imagine my paranoia will drop a bit then...
I dropped my phone while working out at the gym.
I was on the treadmill, and dropped the phone from my hand to the treadmill belt, then it flew out (i was running pretty fast at speed 7) and ended up hitting the wall behind me. Well, I freaked out and ran over to check on the phone.
Even though I had NO protection, the phone was perfectly fine. Only a tiny scratch that's barely visible on the top left bezel, and everything was fine.
I really was surprised at the sturdiness of the phone.
Snarksneeze said:
For me, the Touch Pro 2 has top honors when it comes to "feeling" solid. My sister dropped it the other day and cracked the bevel, with a large triangle missing near the volume rocker and three other cracks on the bottom, top and opposite side.
I am encouraging her to return it and claim the insurance, but since there is no change in the quality of the phone's operation, she wants to keep it.
Again, for me, the TP2 seems more solid than the HD2, but the HD2 is very well-built compared to other phones. I am so paranoid about even putting my phone down on a hard surface, due to the sharp edges of the camera mount and the light metal case.
I will be installing my new invisibleSHEILD as soon as sirphunkee and I can make the time to meet somewhere clean (I have a 2yo at home ). I imagine my paranoia will drop a bit then...
Click to expand...
Click to collapse
My TP2 fell out of my hand in a parking lot, the thing didn't hit hard, but it left a small scratch on the screen (it was visible, but wasn't too obvious) and then some nicks at the corners of the device. It did look used. I returned it to T-Mo (I was still within 14-day remorse period) and used the money I got back to get an HD2 instead (for some reason I didn't qualify for either the full or the 11 month upgrade price, only 50 bucks discount... now that I think about it, I should have gotten it at full price, also, the day after it arrived (ordered online) T-Mo came out with the 2 for 1 smartphone, but alas, a new line was needed and I had no use for it).
I've dropped my HD2 at least 4 times since and there's not a nick on it. I figure the glass screen helps (as opposed to the TP2's plastic), even if it's a finger print magnet. I also have no problems with the screen or bezel being uneven, even after dropping it, nor have I had any single of the problems people complain about, so, go figure, I got the perfect production HD2.
Whew.... OK. Soooo glad to hear this isnt only my device. Mines is on the bottom. I also dont see it getting any worst and its so minor right now its probably not worth the hassle of returning. I tend to keep the gel case on it anyway..
thrashingdeth said:
thats how mine is but in the bottom. not a big deal but i did feel it
Click to expand...
Click to collapse
x2 same as mines.
--
I had an issue with mine creaking, on the bottom. Mainly when I was pressing the start key, or back. Got a replacement and it seems better. For a phone seriously delayed I don't get how the quality is so terrible.
my first hd2 the camera lens started to rattle tmobile replaced it
Tm5078 said:
my first hd2 the camera lens started to rattle tmobile replaced it
Click to expand...
Click to collapse
Was it the camera lens or the casing around the camera?
After watching the tear-down video I could see how the camera casing could be improperly installed and loosen after a bit of handling, but I thought the lens was pretty solid...
--
JWang158 said:
Seriously, this phone is turning out to be pretty half baked.
Click to expand...
Click to collapse
I disagree. Not sure if I got lucky or not, but my phone is in perfect condition despite being a month old and spending most of that time in my back pocket.
I've sat on it countless times, dropped it from my hand to the floor twice and dropped it from the car holder to the console in my vehicle so many times I can't count.
The only problem I have is with the SMS freeze, and I've solved 90% of that by keeping my inbox clean. If I have the money for a class 6 microSD card, I'd bet on having solved the other 10% of my problems.
Since upgrading my radio, I don't have any problems with dropped calls, missing texts, loss of 3G or any of the other popular issues that seem to be plaguing the new owners.
Since bad news always travels faster and wider than good news, one simply can't infer from the issues being discussed here that they are the norm. I would suspect a very small percentage of the HD2 owners frequent the forums here, and of those another small percentage are having hardware issues.
I've been through a few of these new phone releases here in the past and from my experience I would say that this is pretty normal for the first few months of a phone's release. In another month or so there will be a firmware upgrade to fix the freezing and icon switching, then a lot of the issues will switch from hardware to software. Soon after that, I expect everyone will be clamoring for the release of a Windows Phone 7 ROM, followed a few months later by a newer, faster phone that everyone will be switching to. A cycle, vicious but almost predictable.
I know there are plenty of threads about G2 hinge issues, but I'd like to know about your Desire-Z keyboard hinges now that it has shipped.
I've just received my second Desire-Z this morning and it's probably worse than the first one. If pick up the phone, absolutely horizontal, from a table just by holding the upper section, the keyboard just falls half-open. Surely it shouldn't be like this? Here's a quick youtube video I took of my first phone:
Just wondering if I've been really unlucky, or are they basically all like this? I really hope not...
Andre
Mine does exactly the same. I'm not sure if this is normal or not, but I'm not very happy with it.
My other concern is that the screen wobbles back and forth when I have the phone closed if I tap on the left and right edges.
I think this is probably a design flaw rather than a specific device problem. You'll probably find they're all the same
Sent from my HTC Vision using XDA App
Cant quite tell what the angle is in the video.
If I pick up mine by just the top piece then it droops, but doesn't slide out.
If I hold it upside-down by the base it droops, but can't slide.
Whenever I pick up the phone though I hold it by the base, so in normal use it's perfectly fine.
I'm basically assuming that the spring should be just strong enough for the phone to hold itself together (i.e. without the keyboard dropping away at all) when it is gently lifted up from a flat surface. That's the benchmark I would want to see anyway, and neither of mine will do that.
I might take this up with HTC and see what their view on it is - I just hope they don't do an Apple and patronisingly say "you're holding it the wrong way".
Andre
I've just sent off an email to superEtrader asking for a refund as I'm not happy.
I hope they take it back without any hassle since their website says I can't return it if its been opened. Someone on here kindly pointed out the Distance Selling Regulations say I can open it and play with it (I have the PDF stored on my PC!), but I don't want to have that sort of hassle.
my phone has the same problem as the video.
Also, the screen slides down when im lying down, holding the phone by the keyboard.
My phone isnt quite a loose as in the video, but it does droop if I pick it up by the top section rather than the base & also if I am lying down and hold by keyboard it will start to shut... I kinda expected to have a loose hinge based on reviews that I had seen for G2 & at this point its only a very minor niggle, so I wont do any return until I find out there are Desire Zs out there that actually have a firm hinge.
On another note, I noticed yesterday that the black backing of the keyboard is a bit bubbly.. Im hoping that the backing wont start coming away down the road... but I guess only time will tell.
I found it hard to do what was shown on video, I never grabbed phone like this before. It never opened on its own even slightly. Also owned TP2 and never held it by the screen. I dont think people would actually ever hold it like that.
No offense to anyone, I just dont see any issues with my hinge. I know it opens when I hold it like on video or upside down, but If I havent read some posts, I would never try it.
This is just my personal opinion on the "hinges"
The design is for the way we hold and use our phones.. I feel for you bro, but noone holds their phone at the angle your showing this at..
I have had no problem at all yet with the everyday use of this beast)
JD
Honestly, at first it bothered, but really, it really starts to make sense for me now how it acts. If our hinge would be stronger, it'd be more difficult to open it and might have us actually break it.
Also, when I hold it while typing, I instinctively put my index fingers along the side of the keyboard/screen (once it is opened) and type with my thumbs. That way, it's impossible for the screen to fold back in closed position.
When I pick up my phone, I really don't pick it up by only one of the parts (screen/base). It's actually quite heavy at 180g and if I don't want to drop it, I rather pick up nicely and firmly.
So, really, after 4 days with my phone, the thing that bothers me more now isn't the screen, but the weight difference between my old Samsung Galaxy S (with gel back) and the Z.
Actually, funny anecdote, while playing Angry Birds, I actually opened the keyboard so I had a better grip on the phone.
daft.71 said:
Honestly, at first it bothered, but really, it really starts to make sense for me now how it acts. If our hinge would be stronger, it'd be more difficult to open it and might have us actually break it.
Also, when I hold it while typing, I instinctively put my index fingers along the side of the keyboard/screen (once it is opened) and type with my thumbs. That way, it's impossible for the screen to fold back in closed position.
When I pick up my phone, I really don't pick it up by only one of the parts (screen/base). It's actually quite heavy at 180g and if I don't want to drop it, I rather pick up nicely and firmly.
So, really, after 4 days with my phone, the thing that bothers me more now isn't the screen, but the weight difference between my old Samsung Galaxy S (with gel back) and the Z.
Actually, funny anecdote, while playing Angry Birds, I actually opened the keyboard so I had a better grip on the phone.
Click to expand...
Click to collapse
+1000000
QUOTE:Also, when I hold it while typing, I instinctively put my index fingers along the side of the keyboard/screen (once it is opened) and type with my thumbs. That way, it's impossible for the screen to fold back in closed position:END QUOTE
I could not have put it better myself....
JD
I think I'll just keep mine until we get confirmation that better-designed Desire Zs have been produced. The replacement is from HTC and not my supplier, so I should be able to do it at any time during the next 2 years... right?
Mine is pretty solid - I even text in bed and it doesn't fall. I have opened the keyboard once or twice by accident, which is quite funny..
Desire Z on Bell Canada Hinge problem
I have already gone through two DZ's and both have the "weak" hinge. Thankfully mine does not do what is shown in the Video in post #1, thats definitely a defect in my opinion. Just to compare notes on a relative basis here is what mine does.
When the phone is closed I turn it sideways (landscape) lift it from the bottom and then press on the left and right edges with my thumbs. The screen snaps nicely into place. If I then grap the device by the top two corners of the screen and lift it straight up and hold it perfectly horizontally the keyboard drops down. However, if I lift it up at a slight angle the keyboard remains "attached" to the screen. It seems as though there is a magnet of some kind holding it in place.
I instinctively hold it with forefingers and thumb to type much as I do on my Motorola Milestone which slides straight up and down and has no "hinge".
As for lying on my back and typing in Bed if I just hold the bottom portion keyboard along then the screen drops down. HOWEVER that is an extremely awkward way to type for anyone I would imagine.
The question is, did HTC design it to work in this way knowing that people "instinctively" do these types of actions in this way?? I am not sure they conduct such a detailed ergonomic study. There are people that have no hinge issues at all, but unless they apply specific tests as I did here it would be difficult to know if they are experiencing similar problems. If they are doing what comes naturally and holding it as nature intended then they would not deem that there are any problems.
Just my two cents.
This is worse than the "Is my trackpad wobbling?!" threads on CrackBerry. It's supposed to be loose so you can open it with one finger, according to HTC. If you don't like it, take it back (you can definitely get a refund, since it's only been out like 4 days or whatever) and get a new phone. Seriously. You want a stiff slide, get a Milestone, then you have nothing to complain about.
Bought 2 today, they're (identically!) quite loose. I was really worried before buying that I'm gonna get the 'loose one' but to be honest it's not an issue as it's a very weird way to hold your phone and like others said you instinctively hold the device with your thumb and index fingers as that's where they end up when you open the phone. Furthermore, if opened and held vertically just by the bottom, the top part stays in place and only drops down at ~40 deg angle, so unless you text a lot in bed while holding the phone upside down and holding it just by the bottom bit, you won't have a problem. If I lift it up like in the video (it's actually quite an effort) the parts will separate.
Yeah, mine is the same, but dont know why people are making such a big fuss on it, why not for example make a big fuss on the speaker quality instead?
Yeah the speaker is ****, its the one thing that is crap with this phone...
Sent from my Desire Z Beast
Did you ever think choosing a phone would be like choosing a girlfriend. At least with the Desire Z you can test it out in the shop to see if its loose before getting it home and having a nasty surprise lol XD
I never knew I had a hinge problem until I watched the videos. Some people have way to much time on their hands.
Sent from my T-Mobile G2 using XDA App
Good : Well i love the new tablet and in hand its light and a pleasure to use, the Plastic back is nice in hand and not slippery and visually this tablet is great. But ...........
Bad and Ugly : Here's my issue with the new Samsung Galaxy Tab 10.1
What is happening and i can see this being a big problem down the road of use is that when i hold the Tab with my left hand in portrait with the dock connector on my palm of the left hand, the thin piece of the housing is getting bent and pulled away from the glass and over time i see this getting stretched out. i think Samsung should have built the aluminum edging more webbing in the glass to keep that delicate piece from being so flexible and flimsy.
Anyone else having/noticing this issue or any other flaws, defects ????
Here's a few pics of what i am mentioning :
http://imageshack.us/photo/my-images/204/img0528y.jpg
http://imageshack.us/photo/my-images/34/img0529ze.jpg
http://imageshack.us/photo/my-images/854/img0534n.jpg
Damn, and here I was pondering returning my Transformer for a better build quality Samsung. Shootz!
I still may do it though since I never use portrait mode and for the most part it will be on a stand, but still, it sucks to see that.
You must have a 10.1v
I have the Google i/o edition and the side looks different than your with regard to the placement of those round hole covers on either side in relation to the curve.
I think that on the i/o (hopefully it will be the same as the 10.1) it has resolved that issue. I am trying to hold it as you are mentioning and I see no movement whatsoever. even if i try to pry at it, it is super solid.
is your a 10.1v?
R
^^ No mines the 10.1
H0CKEY said:
^^ No mines the 10.1
Click to expand...
Click to collapse
Same as the previous poster my LE from I/O does not look like that either. So what 10.1 do you have?
cosimoss said:
Same as the previous poster my LE from I/O does not look like that either. So what 10.1 do you have?
Click to expand...
Click to collapse
mines from San Fran USA - Dev Conference , its the white back Limited Edition
Everyone needs to specify details regarding there unit if they have one. It is clear that the limited edition/early release galaxy tabs are not identically the same as the one yet to be released.
thats really strange, your tablet looks way different than mine which also came from the recent i/o event.
picture attached...
it would seem there were multiple version of the same device if you have the limited edition white backed then...
anyone else? which do you have?
R
im trying to re-create your picture to make sure its not an optical illusion, but your bottom half of the silver bezel looks so angular/curved compared to mine which as you can see from the picture above is much less curved. Espeically noticeable with the small round hole covers on either end of the connector, mine are not very curves, yours seemvery curved and angular.
???
R
three weeks left and still so many questions and so little definitive answers! oh the humanity
Sent from my HTC Vision using XDA App
RTessi said:
thats really strange, your tablet looks way different than mine which also came from the recent i/o event.
picture attached...
it would seem there were multiple version of the same device if you have the limited edition white backed then...
anyone else? which do you have?
R
Click to expand...
Click to collapse
No mine looks the same from that angle , here's a pic
http://imageshack.us/photo/my-images/84/img0535cj.jpg/
I don't understand - are you using it while something is plugged into the dock connector, or is just from normal use? Maybe you are just holding it wrong?
normal use , i take very good care of my toys hahaha
And no i don't have it plugged in when using it
if you hold it left handed its normal i find that the palm and strong of the thumb seem to put stress on the thin strip of aluminum and slightly pulls it away from the glass since on mine the thin strip is not any thicker under the glass as what i can see visually. so its seems to be a weak point of the aluminum bezel
Bummer i wonder if a port plug would help.
Sent from my Xoom using XDA Premium App
I am not experiencing that same problem, but the glass in one of the corners does appear to be pealing up. Link below. Hoping that this is as far as it raises, but who knows... I talked to the Samsung guy at Google I/O and had my first device replaced for a similar issue I noticed there, and he said this first batch was made by hand in a bit of a rush so that they would be available for us googlers. I expect that the automated and machine driven build process for the production units will have more consistent quality.
http://imageshack.us/photo/my-images/854/imag0206a.jpg/
brianwilcox said:
I am not experiencing that same problem, but the glass in one of the corners does appear to be pealing up. Link below. Hoping that this is as far as it raises, but who knows... I talked to the Samsung guy at Google I/O and had my first device replaced for a similar issue I noticed there, and he said this first batch was made by hand in a bit of a rush so that they would be available for us googlers. I expect that the automated and machine driven build process for the production units will have more consistent quality.
http://imageshack.us/photo/my-images/854/imag0206a.jpg/
Click to expand...
Click to collapse
Harsh that looks bad. I think the quality of the aluminum bezel is to thin and over time with alot of use our holding styles will cause these kind of issues.
H0CKEY said:
Harsh that looks bad. I think the quality of the aluminum bezel is to thin and over time with alot of use our holding styles will cause these kind of issues.
Click to expand...
Click to collapse
Just got off the phone with Samsung about this issue. They will allow me to send the unit to them for repair/replacement. Im just a little worried about going through the whole process only to find that they will send me back a unit with similar or worse build quality issues... Anyone else noticing problems with the screen raising up? Might just stick with what I have for fear of winding up with an even worse unit. Really was starting to fall in love with this thing.
brianwilcox said:
Just got off the phone with Samsung about this issue. They will allow me to send the unit to them for repair/replacement. Im just a little worried about going through the whole process only to find that they will send me back a unit with similar or worse build quality issues... Anyone else noticing problems with the screen raising up? Might just stick with what I have for fear of winding up with an even worse unit. Really was starting to fall in love with this thing.
Click to expand...
Click to collapse
I'm getting the same thing. Mine was this way out of the box at the conference, and with the plastic back pulling back, it looked like the tablet was warped. I popped it back into place and it looked good so I didn't say anything to anyone at the conference about it. I probably should have though, because now the screen is separating from the housing again in those two corners.
I stupidly threw away the blue card they gave at I/O that had the contact info for Samsung, who did you talk to about getting it repaired?
Not exactly getting a warm fuzzy feeling from this thread. I pre-ordered online. Starting to think I might want to cancel that and just wait for it at Best Buy, if even the Samsung tablets are having build quality issues.
Oh no. I was afraid these reports would begin to surface on the 10.1. Some of these issues described Ive seen in the 10.1v as well, although my biggest gripe with these is the severe backlight bleeding. I have now exchanged this device with Vodafone AU twice and seen a total of 6 units and all have had backlight bleeding and inconsistent build quality.
With the first unit I received both right corners of the screen were popping out over the bezel a little. I believed it to be a problem with the adhesive used, because if you were to put pressure on the corner it would hold for a second then release, and you could hear the "sticky" sound as the adhesive separated.
All the units I've sampled though have had really shocking problems with backlight bleeding/leakage. If you're someone who planned to watch movies on this tablet in dimly lit rooms, you could find this distracting. I do. Its a shame really because I otherwise like the quality of the display, and both 10.1 models are nicely designed and nice to hold. In a lot of ways I prefer the feel of the 10.1v over the iPad 2. Too bad though that the build quality is questionable across the range of what is now 3 different variants of the 10.1 that Samsung has produced. What's the deal Samy?!
I'm not sure what I'm going to do yet but most likely I'll return this 10.1v to Vodafail for a refund and wait it out for the 8.9. Perhaps I'll have better luck then?
Sent from my GT-P7100 using XDA Premium App
I've recently purchased black HTC ONE. Although at first look device looks great (design is near perfection), I am really disappointed with its quality.
Build quality: both sides of the phone have rough edges - skin gets caught leaving white residue most of the time. Upper left edge of the screen is not fitted well - raised above the speaker grill
Really hot! It gets uncomfortable hot after few minutes of browsing over wifi - the screen gets warm as well! I also have GNote 2 and Iphone 4s and they get to such temperatures only after havy use when charging.
Camera is no good! (and yes I know how to take a picture) - pictures are noise (in relatively good light) and contain pinkish tint in center when focusing on white surfaces
Pixel grid (horizontal and vertical) is quite visible on the screen when jts turned off (this does not bother me), or on a mid day light and even indoors under some angles (and this is f-ing bothering me!)
I dont know did I get a really bad unit or this device is all looks and no quality...
ssasa said:
I've recently purchased black HTC ONE. Although at first look device looks great (design is near perfection), I am really disappointed with its quality.
Build quality: both sides of the phone have rough edges - skin gets caught leaving white residue most of the time. Upper left edge of the screen is not fitted well - raised above the speaker grill
Really hot! It gets uncomfortable hot after few minutes of browsing over wifi - the screen gets warm as well! I also have GNote 2 and Iphone 4s and they get to such temperatures only after havy use when charging.
Camera is no good! (and yes I know how to take a picture) - pictures are noise (in relatively good light) and contain pinkish tint in center when focusing on white surfaces
Pixel grid (horizontal and vertical) is quite visible on the screen when jts turned off (this does not bother me), or on a mid day light and even indoors under some angles (and this is f-ing bothering me!)
I dont know did I get a really bad unit or this device is all looks and no quality...
Click to expand...
Click to collapse
Bad unit, get a replacement. There seem to be quite a few (I'm waiting for my second - because of a borked plastic cut) but I've also seen perfect examples...
Don't have any of those problems, Black One, build date 27th May Tierra del Fuego sub-contractor (FA)
Just send it back. Obvious.
so u expect ur first wife to be all sweet and caring and lovey dovey and makes a sandwich every morning?
get real
shiningarmor said:
so u expect ur first wife to be all sweet and caring and lovey dovey and makes a sandwich every morning?
get real
Click to expand...
Click to collapse
So how many wives do you plan on trying to get?
That overheating issue you're facing is not normal, I believe. I have had a Galaxy S3 which got really hot after minimal usage, and the HTC One is great when it comes to that in comparison. You have to understand that aluminium soaks up the heat from the internals of the device, which is a good thing and a bad thing; it is perhaps bad because it can get a bit uncomfortable to hold while playing games, for instance, but at the same time it is good because it preserves the internals of the device and prolongs their life.
I have the a silver one and I do not face the problem with the edges. I read that the black one has a coating on it which makes it more prone to scratches, dings and chips than the silver one, so maybe that is the problem you're facing? I have also read that some of the earlier versions had gaps (like the screen not being fitted well, as you mentioned) but I am not sure about them. If you feel uncomfortable about the device, just go to the HTC service center and talk to them about it, perhaps they can sort you out a replacement if you're under warranty.
I cannot comment on the camera because I am by no means a photographer or even have a lot of experience with them, but it is suffice to say that I love the camera and I feel it is much better than my S3, sister's 4S and Dad's iPhone 5.
Yes I do expect here to be exactly as you've described. Maybe this is why my relationships does not last more than a year
I am also thinking of asking for another unit. But in my cowboy / banana country this really a hassle...
Nippero said:
So how many wives do you plan on trying to get?
Click to expand...
Click to collapse
maybe 3 xD
ssasa said:
Yes I do expect here to be exactly as you've described. Maybe this is why my relationships does not last more than a year
I am also thinking of asking for another unit. But in my cowboy / banana country this really a hassle...
Click to expand...
Click to collapse
hahaha
ot : ur unit isnt normal. get it replaced
TarekElsakka said:
That overheating issue you're facing is not normal, I believe. I have had a Galaxy S3 which got really hot after minimal usage, and the HTC One is great when it comes to that in comparison. You have to understand that aluminium soaks up the heat from the internals of the device, which is a good thing and a bad thing; it is perhaps bad because it can get a bit uncomfortable to hold while playing games, for instance, but at the same time it is good because it preserves the internals of the device and prolongs their life.
I have the a silver one and I do not face the problem with the edges. I read that the black one has a coating on it which makes it more prone to scratches, dings and chips than the silver one, so maybe that is the problem you're facing? I have also read that some of the earlier versions had gaps (like the screen not being fitted well, as you mentioned) but I am not sure about them. If you feel uncomfortable about the device, just go to the HTC service center and talk to them about it, perhaps they can sort you out a replacement if you're under warranty.
I cannot comment on the camera because I am by no means a photographer or even have a lot of experience with them, but it is suffice to say that I love the camera and I feel it is much better than my S3, sister's 4S and Dad's iPhone 5.
Click to expand...
Click to collapse
Its not chipped or scratched. It looks quite nice really. However you can feal its edges scratching when you hold the phone. Nothing dangerous just bloody annoying - due to hype about build quality I had my expectations set high.
I am no photography expert I just take pictures with steady hand and in fair light - if my subject is the white wall, the pink tint is all over the middle of the picture
As others said probably very bad unit. I'll try to replace it on monday.
Definitely defective. I've been using the phone for the last hour browsing the net and checking email. Still cool to the touch. Not sure what the sharp edges are...
mine got pretty hot the first week i had it and the battery life wasnt very good but after having it for a while it seemed to have settled down and battery life is very good now
Itaintrite said:
Definitely defective. I've been using the phone for the last hour browsing the net and checking email. Still cool to the touch. Not sure what the sharp edges are...
Click to expand...
Click to collapse
Cool to the touch? Do you have massive calluses on your hands that are impenetrable to heat? I don't know if I've read of anyone else describing this phone as cool to the touch when being used.
As for the OPs phone. Return it. I've got black One and it is so damn nice. If you aren't fully enjoying it, something must be defective. The casing certainly sounds like it is. The camera: I recently took a short trip and only brought the phone as my camera. Before, I didn't like the camera so much. After spending time with it, I grew to like it quite a bit. It isn't an amazing camera, but it still gets pretty good shots. Maybe your settings need some tweaking, or you got a really bad unit and the camera is defective as well.
Anyway, take it back. Get yourself a perfect One. :thumbup:
Sent from my HTC One using xda app-developers app
ataft said:
Cool to the touch? Do you have massive calluses on your hands that are impenetrable to heat? I don't know if I've read of anyone else describing this phone as cool to the touch when being used.
As for the OPs phone. Return it. I've got black One and it is so damn nice. If you aren't fully enjoying it, something must be defective. The casing certainly sounds like it is. The camera: I recently took a short trip and only brought the phone as my camera. Before, I didn't like the camera so much. After spending time with it, I grew to like it quite a bit. It isn't an amazing camera, but it still gets pretty good shots. Maybe your settings need some tweaking, or you got a really bad unit and the camera is defective as well.
Anyway, take it back. Get yourself a perfect One. :thumbup:
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Well, then fact that I'm in a room with AC probably helps too. But yeah, pretty cool to the touch. Not even warm.
Please don't feed the trolls
----------------------o('_')o----------------------
Sent from an HTC One with using xda app:
TrickDroid ROM 5.6
Bulletproof 1.10
ssasa said:
Yes I do expect here to be exactly as you've described. Maybe this is why my relationships does not last more than a year
I am also thinking of asking for another unit. But in my cowboy / banana country this really a hassle...
Click to expand...
Click to collapse
I think a lot of us forget that not everyone has the opportunity to just walk in store and get a replacement.. There's a lot of downsides to ATT and Tmobile, etc. upsides are they will most likely exchange them until your happy. At least you dont have to accept a bad one..Keep mentioning zero gap til they bring one that applies I got lucky i guess and my first one is nearly perfect.
It sounds like yours is bad enough to do whatever you gotta do to get it replaced. Good luck,
Pixel grid? Do you mean you can see the digitalizer layer? This is quite normal on capacitive touch mobiles with thin glass
Sent from my HTC One using XDA Premium HD app
I love the Z1. So much. BUT:
- It's slippery as hell. I live in a humid climate and I nearly dropped it at least 10 times taking it out of my pocket when its a little wet.
- Speaker - Not a big issue as most of us use headphones anyway, but still annoying when showing videos to someone in public and all you hear is this mangled mess of tinny audio.
- Camera presets - Sony, for the love of god, please allow me to jump into my camera SAVE MY SETTINGS in a preset for those point and shoot moments!
Aside from that, this phone kicks a**. And yes, I have no problems with the 'viewing angles' - I am not a crustacean and my eyes are generally level with the screen during use.
What do you guys think? After some time with the device, what kinda tweaks could be made to improve it?
I'd prefer the back to be aluminium since I also think it's too slippery.
I use a lanyard wrist strap from an old sony camera instead of a case and I think it's great, it can't fall and it still looks sexy.
the only problem i have is how fragile it is. i'm on my 3rd one since release. one fell out of my pocket and broke (i was sitting down) and one pressed against my keys in my pocket and the screen shattered.
1988amr said:
- Camera presets - Sony, for the love of god, please allow me to jump into my camera SAVE MY SETTINGS in a preset for those point and shoot moments!
Click to expand...
Click to collapse
This would be very useful. 3rd party apps could provide this kind of functionality. But the problem is sony does not permit access to camera functions to these 3rd party apps. LG isn't any better, the nexus 5 & G2 are in the same boat too.
This means we're dependent on the stock app for complete functionality.
When will they allow saving presets in the stock app ? anybody's guess
1988amr said:
- It's slippery as hell. I live in a humid climate and I nearly dropped it at least 10 times taking it out of my pocket when its a little wet.
Click to expand...
Click to collapse
I'm in the exact opposite situation weather wise, cold and dry. Really ****ing slippery unless you go around with sticky hands which wouldn't be too professional in my line of work.
I'd love to find some kind of grippy rubbery tape I could apply in stripes on the phone, preferably on the sides. Haven't found anything despite extensive searches.
Anyone else have a tip where such a thing could be found?
For me it is the Flashlight which is placed in the worst place. Everytime i do a picture with the flash i see in every shot the light coming from the bottom side and so 1/4 of the picture is "white"....
rage77 said:
I'm in the exact opposite situation weather wise, cold and dry. Really ****ing slippery unless you go around with sticky hands which wouldn't be too professional in my line of work.
I'd love to find some kind of grippy rubbery tape I could apply in strike on the phone, preferably on the sides. Haven't found anything despite extensive searches.
Anyone else have a tip where such a thing could be found?
Click to expand...
Click to collapse
How about this ?
Sony Xperia Z1 TPU Gel Skin Case / Cover
One Twelve said:
How about this ?
Sony Xperia Z1 TPU Gel Skin Case / Cover
Click to expand...
Click to collapse
Thanks but I really don't want to add any bulk to the phone so I'd rather not have a case on it. Hence the grippy stripes idea.
rage77 said:
Thanks but I really don't want to add any bulk to the phone so I'd rather not have a case on it. Hence the grippy stripes idea.
Click to expand...
Click to collapse
https://www.west49.com/products/skate/grip-tape.html
Most malls in Canada and the USA have a West-49, a skater type shop.
If all else fails, most Canadian Tire, WalMart and other similar "we have everything you'd ever need" type stores sell tape with sandpaper type texture on one side. Just don't cheap out. Buy the vehicle quality 3M brand, as that's waterproof and moisture proof, and won't peel off from being taken in and out of a pocket frequently.
rage77 said:
Thanks but I really don't want to add any bulk to the phone so I'd rather not have a case on it. Hence the grippy stripes idea.
Click to expand...
Click to collapse
A gel case isn't bulk, that's the most minimal case you'll ever get for the Z1. Can hardly tell its even there if you colour match.
Grip tape will be a dust& lint magnet. yeah great for grip but how comfortable after a bit.
Seelbreaker said:
For me it is the Flashlight which is placed in the worst place. Everytime i do a picture with the flash i see in every shot the light coming from the bottom side and so 1/4 of the picture is "white"....
Click to expand...
Click to collapse
I have that problem too sometimes but it usually goes away if I wipe down the camera lens glass. Not sure why it fixes it, but it does.
ASF - it just gets in the way cause its scratched so easily
just use glass with oleophobic coating like every other phone manufacturer does - if you want additional protection buy a screen protector (which are much harder to scratch then the ones Sony uses on their phones..)
phone is a massive fingerprint magnet due to bad quality ASF..
Seelbreaker said:
For me it is the Flashlight which is placed in the worst place. Everytime i do a picture with the flash i see in every shot the light coming from the bottom side and so 1/4 of the picture is "white"....
Click to expand...
Click to collapse
What case are you using ?
I'm adding a new peeve - my wifi after switching to 4.3 is horrendous. Need like a super hi performance router to keep any connection and even in my car it takes ages to connect to bluetooth. Def some connectivity issues going on here after the update...
Also, I have night shots that are noisy AS HELL.
Any suggestions?
New one, loose USB port flap. No more waterproof for me
Sent from my SGP311 using Tapatalk
1988amr said:
I'm adding a new peeve - my wifi after switching to 4.3 is horrendous. Need like a super hi performance router to keep any connection and even in my car it takes ages to connect to bluetooth. Def some connectivity issues going on here after the update...
Also, I have night shots that are noisy AS HELL.
Any suggestions?
Click to expand...
Click to collapse
factory reset for the wifi. i had to do that to fix some other issues after updating (static during calls, proximity sensor not working)
I always do a factory reset after updates. It ends up saving you time...
Sendt fra XPERIA Z SGP312
Pet peeves..well I'll start off by saying I am in fact very happy with the handset, it's a beautiful device and performs beyond anything I'd ever expected.
But those peeves...
1: Magnetic charging is a novelty and in reality the magnets aren't powerful enough to use in the car as the cable just falls off.
2: A Navbar the size of a small country, Sony created a wonderful screen then filled a good deal of it with Navbar. I shouldn't have to root and use Xposed to reduce it.
3: No white balance settings...I mean come on, the older Z had it!
4: White phone... But black screen bezel totally ruins the looks of it, I picked the black one for that reason.
5: Rooting 4.3 (for now, I know this will change in the future) is a pain.
And finally.
The camera flash has more noise in it than a rock concert, with a case on it just ends up whitewashing the pictures.
But I'd still have an Xperia over ANY other handset.