Adding driver to Android - Android Software Development

Hello, I found a driver online that I want to add to my Android phone. It is a DisplayLink device driver.
magoroku15/DisplayLink-driver-for-android (from github)
The part I am confused about is how to go about adding the driver to my phone. Do I need to download the Android source code, add the driver to that, and then build the whole thing? Or is it possible to just load the driver as a module?
I've searched Google but haven't found anything definitive. I'm not even sure if I'm using the right terms here, as I haven't ever played around with adding drivers to anything before.
Any help would be greatly appreciated!

yes. i would also like to know how this is done.. please share. thanks

me 3! tell usssss

you would need a dev environment setup to cross compile for that device (your phone) then compile the source as a module and load it from a command line. (insmod <module>). if you get a new line in the terminal without error, its loaded.

thanks! ill try this later..

nenn said:
you would need a dev environment setup to cross compile for that device (your phone) then compile the source as a module and load it from a command line. (insmod <module>). if you get a new line in the terminal without error, its loaded.
Click to expand...
Click to collapse
What if you don't (or don't want to) have root access on the phone?

well this guy in his thread is loading a lot of drivers *.ko i thing?
helpful?
*edit* forgot the link
http://sven.killig.de/android/N1/2.2/usb_host/

Any answers?
I'm looking for the same thing: I want to install a new driver on Android devices, but I can't Root the devices - I need to add the driver(s) to stock Android installations.

Just curious.. why do so many ppl seem to add driver to their system? :/

My task is similar to noted earlier.
I want to make "virtual driver". In other words, the device doesn't have specific hardware and I need to emulate it programmately.
Any hints and links would be useful.
Thanks.

jkoshi said:
What if you don't (or don't want to) have root access on the phone?
Click to expand...
Click to collapse
I think you would need root access on your device in order to load your kernel module: 'insmod your_module.ko' or whatever.
- jc

Hey i was looking to do this exact thing so i could connect a mimo monitor to my phone any progress or step by step instructions

Subscribed

you need to have right kernel module compiled on the same kernel version that you android is running on.
it is a may be not only *.ko file, but it may need also another firmware files.
if it is only one file, you are lucky, you need just that ko file with right kernel version and put to vendor directory with modules.
and if not automaticaly loaded, you must call insmod command from rc file on device boot or manually from terminal.
better solution is to compile kernel yourself with driver inside it.
for details see 'linux kernel modules'.
Note: for sure you need root access to such as system modify operations...

And here : https://hex.ro/wp/blog/compile-an-android-kernel-module-outside-the-kernel-source-tree/

Related

LINUX BOOTS at OPAL! Thanks to linwizard project!

Hi there,
I got Linux to boot at OPAL via linwizard project. Here are steps needed to get it work.
1) download image from:
http://tinderbox.x86.dev.gentoo.org/embedded/linwizard/gizard-20080602.tar.bz2
2) copy content of file to the microSD card
3) edit default txt and replace init=/linuxrc with init=/bin/sh
4) run haret and let it boot.
After a while you'll get to shell. No graphics.
Now you can attach microusb cable and connect it with your linux laptop (I recommend ubuntu)
and you will get usb0 interfece to start up.
Which IP to use to connect with OPAL I still must investigate.
Well ip connectivity now works:
ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>
Notas:/# ifconfig usb0 up 192.168.2.200 netmask 255.255.255.0
Listik:/usr/src/linux-2.6.27/Documentation# ping 192.168.2.202
PING 192.168.2.202 (192.168.2.202) 56(84) bytes of data.
64 bytes from 192.168.2.202: icmp_seq=1 ttl=64 time=2.95 ms
64 bytes from 192.168.2.202: icmp_seq=2 ttl=64 time=1.72 ms
And how to do it:
prolong "set CMDLINE" line with
ip=192.168.2.202:192.168.2.200:192.168.2.200pal:usb0
But in this image there doesn't seem to be any telnet/ssh server running. I will try cook image with ssh server support later
Download error
Were not able to re-upload
404 file not found error!!
http://tinderbox.x86.dev.gentoo.org/embedded/linwizard/
and open latest gizard-<date>.tar.bz2
or that I suppose.
The latest link should be http://tinderbox.x86.dev.gentoo.org/embedded/linwizard/gizard-20090703.tar.bz2
does this mean any chance of android working? anyone tried?
Hey,
I'm a new Opal user and I'm interested in getting *nix running on my device. I still haven't had the chance to mess around with this stuff but I'm excited to see this thread.
I was looking into the possibility of running Android on the Opal and it seems the closest thing is this thread bout running it on the Herald (it uses the same processor as the Opal).
I don't any experience in Linux porting so I thought I'd share this, in case anyone else is interested. And at the same time, I'll try to see if I can get something working based on what has been/is being done for other devices.
Sorry for the long post.
Hey Folks,
Any progress on getting Android on Opal? I am eagerly waiting to load one.
Kindly let me know, if this version of Linux when loaded, gives the UI.
Cheers'
Vijay
cijoml said:
Hi there
I got Linux to boot at OPAL via linwizard project. Here are steps needed to get it work.
1) download image from:
http://tinderbox.x86.dev.gentoo.org/embedded/linwizard/gizard-20080602.tar.bz2
2) copy content of file to the microSD card
3) edit default txt and replace init=/linuxrc with init=/bin/sh
4) run haret and let it boot.
After a while you'll get to shell. No graphics.
Now you can attach microusb cable and connect it with your linux laptop (I recommend ubuntu)
and you will get usb0 interfece to start up.
Which IP to use to connect with OPAL I still must investigate.
Click to expand...
Click to collapse
Android can boot on Opal
I have some good news, Android can boot on the Opal. This is just a proof of concept as it's missing tons of drivers and is completely useless.
Touchscreen and all keys except for the volume control (and obviously the reset button) are not working. So you basically can't do anything when you run it.
What I tried is the same as what's written in this thread about running Android on Gene. They're using the build made for the Herald/Wing (just as I was proposing in my last post) with customized initramfs and kernel.
You'll find all the necessary details in that thread. However, there's a newer build than the one mentioned there it's wing-linux-0.4pre2.cab. And the suitable kernel for that build is supposed to be the pre2 posted in this post but it didn't work on my Opal so I tried the older Gene kernel and it worked. The main difference between the two is bluetooth support, and that's obviously is of no use for us.
This doesn't effect the Windows rom, nor does it requires any special partitioning. Still it's best to have everything backed up before launching it, just in case.
This is the official site for the wing/herald build:
http://wing-linux.sf.net/
This thread on their forums about the Gene port will probably be of use to us:
http://sourceforge.net/apps/phpbb/wing-linux/viewtopic.php?f=4&t=4
I'm reading about the next steps but as I said before, I don't have any previous experience or knowledge about this type of things. If someone can give me hand, I would be more than grateful. At any rate, once I have better understanding of the concept I'll contact the people behind the Wing and the Gene ports.
P.S: If you do try to run this, keep in mind that this will take lots of time, specially for the first launch. And when you get an error saying something like "android sh: can't access tty" just ignore it and keep waiting. After a while you'll have a flashing "android" on the screen, and after some more waiting you'll reach the main screen.
Is this just THE BEGINNING
Sooper Stuff..!! So is this just THE BEGINNING??
How do we port the drivers and other required information in the build?
Cheers'
Vijay
www.msigeek.com
A Lil' help
I'm going through the Gene port thread here and on the Wing-linux sourceforge forums but I'm still a bit overwhelmed.
I would appreciate any help as I'm completely new to porting. I have some programming and linux knowledge but never attempted this type of things.
Click to expand...
Click to collapse
So am I.
Hmmm...
Right. Lets do it the way I did it.
1. Get the touchscreen working. Through HaRET, you must have got the GPIO interrupt whenever you pressed the touchscreen. You must have got two numbers corresponding to each press - a smaller number and a bigger number. The smaller number is the GPIO, and the larger number is, well, lets say a special GPIO value for the same pin.
Now checkout the Gene branch through git.
Goto /wing-linux/kernel/arch/arm/mach-omap1/board-htcherald.c
Scroll down to a block of code where you'll see the touchscreen code. Enter the smaller number in the .dav_gpio statement, and the IRQ number in the OMAP_GPIO_IRQ() statement below.
2. Follow the Kernel build instructions on the development section of the wing-linux wiki (the two make commands)
Copy the zImage into the linux folder on your SD card
Boot into wing-linux. The touchscreen should start working.
3. Now, hopefully, after the touchscreen's working, You would essentially just require two more buttons - the home button and the back button for minimum functionality. Everything else can be worked on by the touchscreen.
Then follow the instructions on the wing-linux forum (Page 2) to get the KEY(row,col) values of the keys on your handset. Hopefully you should get atleast a couple. Note down the corresponding keys and their KEY(r,c) values output.
4. Fire up board-htcherald.c again and goto the place where you have the KEY(r,c,KEY_blah) thing and replace the codes as per your obtained KEY(r,c,KEY_blah) values (The Home button is the one commented as Left Button)
5. That's all I can help you with as of now. I'm also figuring out a stable way of getting the DPad and the center select key to work, but It'll take some time.
Thanks kshaurya!
(This guy right here is the one who fixed the kernel for Gene, I asked him for some pointers).
I don't want to take my device apart just yet (I usually do my best not take to dismantle anything that I haven't owned for at least 3 months unless absolutely necessary) and I couldn't find a place that states what touchscreen it uses. I'm just hoping that it's the same a tsc2046 as well. [Is there anyone without a warranty and/or willing to check for us?]
I'm gonna double check the values I got from the touchscreen as for some reason I seem to have to IRQ values, probably forgot to get rid of some spamming irq. And, at the same time, I'm currently setting up a VM as a building environment, my main boot is Intrepid 64 and there's no 'psyco' package for 64 machines.
If anyone else have some experience and wants to try this, refer to: http://www.handhelds.org/moin/moin.cgi/HaRET_20Documentation (using haret to get the GPIO and IRQ values needed).
And to:
http://sourceforge.net/apps/trac/wing-linux/wiki/Development (acquiring the source code from Wing Linux and how to build it).
And a quick question for anyone that tried booting Android on the Opal, what screen did you get when Android finally finished booting?
I don't want to take my device apart just yet
Click to expand...
Click to collapse
Huh? where did that come from? Wing Linux will not touch your WM.
I seem to have to IRQ values
Click to expand...
Click to collapse
Do you mean two? Well, that's exactly what you should get. Even if it's just one, enter that value in the code.
my main boot is Intrepid 64 and there's no 'psyco' package for 64 machines
Click to expand...
Click to collapse
Oh no. dont tell me that you are building the entire thing. all you need to do is build the KERNEL! Please! Don't go into building the whole thing from scratch. Use the make ARCH ARM commands given on that page.
kshaurya said:
Huh? where did that come from? Wing Linux will not touch your WM.
Click to expand...
Click to collapse
I mean to check the screen, in case it turned out to be different that what you have.
kshaurya said:
Do you mean two? Well, that's exactly what you should get. Even if it's just one, enter that value in the code.
Click to expand...
Click to collapse
Yeah, stupid typo.
I noticed now that one of them appears when I keep the screen 'touched' for a bit longer.
kshaurya said:
Oh no. dont tell me that you are building the entire thing. all you need to do is build the KERNEL! Please! Don't go into building the whole thing from scratch. Use the make ARCH ARM commands given on that page.
Click to expand...
Click to collapse
I'm not gonna build the complete thing. Seems like I got too exited and failed to notice that building the kernel only requires a cross-compile toolchain, te rest is for compiling the whole thing.
I'm not THIS stupid usually . Honestly!
Thanks again!
I'm not THIS stupid usually . Honestly!
Click to expand...
Click to collapse
Its pretty normal
Weird.
I've only changed the two touchscreen values and built the kenrel. It finished without any error but now it won't boot.
It gets stuck, even before the space allocation part, with this error: "sh: can't access tty; job control turned off". And then it displays a prompt.
I'll try modifying an older build, I'm pulling them from the repos at the moment.
After all, the pre2 kernel from Gene didn't boot on my device (although it got stuck later on).
Try doing a clean install - Remove the linux folder and try again.
Also, make sure that you're not forgetting to checkout the Gene branch.
Code:
git checkout Gene
Is your default.txt modified? And have you downloaded the modified initramfs.cpio?
check in the Gene forums for that.
Already tried the clean install, no dice. The default.txt is untouched and I'm using the modified intramfs. What happened this time is different from what happens using the original one, it's not asking me to specify the partition size but instead it's waiting for a command. I could probably ssh via usb but I have no clue how that might help.
And I've already checked out the Gene branch from the beginning.
I've tried compiling the kernel for pre1 (after changing the screen values) from SVN and it did boot (both using the cabs for pre1 and pre2) but no touch screen yet. All in all, I'm guessing that there's too much hardware difference here.
And the button for lowering volumes didn't work either, it seems like whatever you changed for getting it to work on Gene is the same as what we need here, but I'll think about that later.
I only have two ideas left:
- Trying to go back to a more stable build (with lesser features and lesser possibilities for errors). Maybe 0.3.
- Trying to create some kind of hybrid kernel using this alongside the HTC Vogue build as it probably has closer hardware to the Opal (obviously, I'm talking about everything beside the MSM7500 400MHz processor that it has). I'm hoping it won't get to this cause I'm definitely under qualified for that at the time being.
What happened this time is different from what happens using the original one, it's not asking me to specify the partition size but instead it's waiting for a command.
Click to expand...
Click to collapse
Could you post a screenshot?
I've tried compiling the kernel for pre1 (after changing the screen values)
Click to expand...
Click to collapse
I'm assuming you mean the touchscreen values? Try interchanging and see.
Trying to go back to a more stable build
Click to expand...
Click to collapse
I wouldn't recommend that. Defeats the whole purpose.
Why don't you try getting in touch with darkstar?
kshaurya said:
Could you post a screenshot?
Click to expand...
Click to collapse
A friend borrowed my digital camera, I tried my laptop's webcam but the text it too blurry. Couldn't fix it using gimp either. So here's exactly what's showing on the screen:
Code:
mdir: Cannot creat directory `/mnt' : File exists
modprbe: could not parse modules.dep
initramfs: Creating device nodes:
initramfs: Loading /initrd.d/10-initfs.sh module
initramfs: Loading /initrd.d/30-wingboot.sh module
Selected:
ROOT_DEVICE=/dev/
CMDLINE=debug quiet psplash=false loglevel=7 init=/sbin/init console=tty0 video=omapfb:accel fbcon=rotate:3 4 root=/dev/
initramfs: Loading /initrd.d/80-loopboot.sh module
initramfs: Loading /initrd.d/85-blockboot.sh module
booting from: /dev/
mount: Mounting /dev/ on /mnt failed: Invalid argument
Unable to mount rootfs device
sh: can't access tty; job control turned off
/ $
And after the prompt, on the same line, there's a flashing '_' waiting for input.
Using the original zImage (from the pre2 cab) it's right around here that the screen clears and the Wing Linux installation script kicks in.
kshaurya said:
I'm assuming you mean the touchscreen values? Try interchanging and see.
Click to expand...
Click to collapse
Will try that next.
kshaurya said:
I wouldn't recommend that. Defeats the whole purpose.
Click to expand...
Click to collapse
I meant it as just a temporary test to till the cause of the incompatibility is figured out. With less things that could go wrong, it'll be easier to locate the ones that are going wrong.
kshaurya said:
Why don't you try getting in touch with darkstar?
Click to expand...
Click to collapse
You're right. I should post a thread on the project's forums asking for his help.

building a kernel with device driver

Hi,
I am new to the android development and a bit confused from all this (root, no root etc).
Say I want to write a new kernel driver to handle keyboard input, and want it to run only on my phone. And my phone is not the developer phone, nor exploitable for root privilege escalation.
Can I download the source files and compile a new kernel with my driver? I guess I cannot use the Android sources, but need my phone specific branch. e.g if I own an HTC Hero I need to get the specific sources from HTC, and they don't publish kernel sources for all their models...
But if I found the source, add my sources and compiled it, It should be easy (and legit ) to load the new image to the consumer phone right ?
Thanks
Roee
More or less that is correct. The source code will contain the license terms, if it says GPL then you are golden. If you get the source from a questionable route and it's not necessarily "public" then it goes into a gray area. Generically speaking, if you get the Android source, and the source code for your keyboard, build an image with it, flash it to your phone, then you are perfectly fine. If you choose to redistribute that code that you mashed together, it's arguable you'd then also have to publish your mashed up code or at the very least the 2 sources you used to mash it together. Mash is the best word I can think of right now
-Chad
Thanks for the reply Chad.
If the software is GPL, and I don't intend to publish the code, I just want to play and check couple of things.
I wonder if i can only compile a new keyboard driver (for example), and just load the ko file somehow without flushing the whole kernel.
I don't have much experience in the linux world, but I would guess it will be something like :
get the branch from the android git
compile a new kernel object for the keyboard
use adb to load the ko file to the device
insmod the new device
somehow remove the current keyboard device and map a new device with the new kernel driver
is this the correct flow ? is there example of how to do it somewhere ?
Cheers
Roee
Ok, I think I have a little better understanding after I played with my G1 today...
So now I understand how to enumerate all the devices in the system, and find the proper devices (e.g using cat /proc/bus/input/devices , or in /devices/virtual/input/ ), but I fail to understand how to replace the proper lkm module. When I run lsmod, the only module loaded is the Wlan module.
How can I find which file is responsible for the keyboard and replace it with my driver? Or must I recompile the whole kernel in order to replace the driver with my modified driver?
I guess it became an easy linux questions.... (just not easy for me )

UK Nook Glowlight software 1.2.0 - Don't use glownooter

I got a uk glow worm on the 27th (2 days before release ) and one of the first things that I tried to do was to root with glownooter. Bad idea! I thought that I had bricked my device. I had to use a lot of trickery to recover from a loading screen lock-up and once I did the first thing that I did was backup my nook (Which i should have done before).
UPDATE!
Please try my new ROOT install pack HERE:
http://forum.xda-developers.com/showthread.php?p=34216660#post34216660
This can be used to root and install the most requested things of this thread in just one zip.
Here is a quick guide to most things you will need to do to get started. I will update this guide as I discover and build new modifications.
To Backup and Restore
Follow this guide. Please do this BEFORE any other tinkering!
http://blog.the-ebook-reader.com/20...-and-restore-nook-glow-and-nook-simple-touch/
Its important to check your backup before proceeding! Please listen to roustabout and dont skip this step... He knows what he's talking about
roustabout said:
I'd like to suggest an addition to the backup method that many folks are using - always test your restore, but dont test it (the first time) on your device.
Your backup file should be about 2 gig.
find a 2 gig or larger flash drive or sdcard and restore your backup image to that drive.
when you're done, there should be 8 partitions, as there were on your Nook to begin with.
If you can't get that working - you're not ready to root yet. Until you're sure you can restore, don't start making changes, please.
People turn up all the time having screwed themselves over by restoring a partial backup and not knowing it, or having restored only one partition from a complete backup and having blown out the partition table.
Click to expand...
Click to collapse
Thanks roustabout
To Root!
Make sure you use the CWM file suitable for your SD Card. I used "2gb_clockwork-rc2" because my card was 2gb+.
http://forum.xda-developers.com/showthread.php?t=1360994 (Thanks mali100)
Use WinImage with admin rights to restore CWM virtual hdd image to your SD.
Download tinynoot-1-of-2 and tinynoot-2-of-2
http://forum.xda-developers.com/showthread.php?t=1650593 (Thanks to eded333 and roustabout)
Put on CWM boot SD.
Install them in CWM back to back (I didn't bother with the restart in the middle as it should not make a difference considering the file content). After a restart you should have root access and an android launcher on your 1.2.0 Nook (among other files). If nook fails to boot one of the tinynoot files may have corrupted. Recover, Re-download and Retry!
To Add Apps
Using ADB to install apps is easy. Extract this to your C drive:
http://dl.dropbox.com/u/13673492/ADB + Fastboot + Drivers.zip
Navigate to the folder in a cmd prompt.
Drop your APK into the same folder and on your nook open the "adbwireless" app and enable ADB
That app will tell you what your nooks IP address is.
Then you can:
Code:
adb connect ip.address.of.nook:portnumber
adb install app_of_your_choice.apk
Setup ADB over USB
OK I have taken the liberty of building a quick driver mod to support your nook through USB. It works for me. First you need to have the android SDK if you don't already (sure you do but just in case ).
http://developer.android.com/sdk/index.html
Make sure you tick to install the android USB driver when the SDK is installed.
Browse to extras\google\usb_driver in your SDK folder (wherever you put it) and replace android_winusb.inf with my file:
http://dl.dropbox.com/u/13673492/android_winusb.inf
Next go to C:\Users\your_user_account\.android and replace adb_usb.ini with my file:
http://dl.dropbox.com/u/13673492/adb_usb.ini
In device manager, point google ADB driver to this and hopefully that should get you set up!
To test type
Code:
adb devices
Its working if you get something like this:
Code:
* daemon not running. starting it now on port ____ *
* daemon started successfully *
List of devices attached
[YOUR NOOK] device
And then try
Code:
adb install app_of_your_choice.apk
UPDATE
Install Multitouch Kernel With Overclocking
Install the CWM zip using your clockworkmod SD card
http://forum.xda-developers.com/showthread.php?t=1906507
:good: Thanks to johnjtaylor for discovering that this kernel works works.
Hopefully this more comprehensive guide will get others with this software to start playing around.
If this helps, be polite and say thankyou
Have you setup ADB yet? If you can connect with ADB and get a shell, you can execute a 'df' at the shell prompt to see how much free space is available in each partition. On my NST (no glowlight) apps seem to be installed in /data/app so see how much free space is there. On the NST, this appears to be the same partition that books purchased from B&N are placed in, so if you have a lot of books from B&N, you may have to archive some to install apps. Of course all this is going on the assumption that the NST Glow is similar to the NST in this regard.
David0226 said:
Have you setup ADB yet? If you can connect with ADB and get a shell, you can execute a 'df' at the shell prompt to see how much free space is available in each partition. On my NST (no glowlight) apps seem to be installed in /data/app so see how much free space is there. On the NST, this appears to be the same partition that books purchased from B&N are placed in, so if you have a lot of books from B&N, you may have to archive some to install apps. Of course all this is going on the assumption that the NST Glow is similar to the NST in this regard.
Click to expand...
Click to collapse
Thanks for replying. I'm actually working setting up ADB now. As for books I only just got my nook so all of my titles are epub format on an sd card so i wouldn't think it would be that. As soon as I get ADB set up I will post back my results incase it helps anyone else with this new software version.
Can you look in the documentation that comes with the reader for any reference to 'third party software' or 'GPL software'. They should list where to download / apply for the source code somewhere. Once we can see the source code we can compare it against the existing versions and identify any significant issues.
I set up ADB.
Plenty of space in all partitions including /data for the apps that I want. Managed to install through "adb install some_app_i_want.apk" so problem resides with the amazon app store. Not really an issue for me because I have a specific set of apps that I want and don't need to browse the app store.
I will try to work out what's wrong for others.
staylo said:
Can you look in the documentation that comes with the reader for any reference to 'third party software' or 'GPL software'. They should list where to download / apply for the source code somewhere. Once we can see the source code we can compare it against the existing versions and identify any significant issues.
Click to expand...
Click to collapse
Thanks. I'm looking for it now
No reference to GPL. Only references to third party software are to tell me that my warranty is no longer valid (no surprise there!)
Is there any other place I can find this info thats not the documentation?
loney01843 said:
No reference to GPL. Only references to third party software are to tell me that my warranty is no longer valid (no surprise there!)
Is there any other place I can find this info thats not the documentation?
Click to expand...
Click to collapse
Nothing obvious from the uk.nook.com website. On the US site the 'support' section links to terms of service which contain the links to the open source code (see http://www.barnesandnoble.com/container/nook_lnav.asp?pid=43307 and search for NOOK 1.1.5 OSS Release ), but I can't see an equivalent on the UK site. It's an oversight, but such things happen with a new product launch.
You can email them at [email protected] . The relevant paragraph from the US site is:
1. Notwithstanding anything to the contrary in this Agreement, certain components of the Software are licensed subject to the General Public License Version 2.0, a copy of which is attached as Exhibit A (the "GPL License"). You may not use these components except in compliance with the GPL License. In addition, you may have additional rights with respect to such components under the GPL License, including, without limitation, the right to obtain the source code for such components from us. You may obtain a copy of such source code by contacting us through the contact information provided on the Web Site. We will provide such source code in accordance with the GPL License.
I don't legally have the right to request the source code myself, because I don't own a UK NOOK yet. (Yeah, thinly veiled excuse for laziness!)
staylo said:
Nothing obvious from the uk.nook.com website. On the US site the 'support' section links to terms of service which contain the links to the open source code (see http://www.barnesandnoble.com/container/nook_lnav.asp?pid=43307 and search for NOOK 1.1.5 OSS Release ), but I can't see an equivalent on the UK site. It's an oversight, but such things happen with a new product launch.
You can email them at [email protected] . The relevant paragraph from the US site is:
1. Notwithstanding anything to the contrary in this Agreement, certain components of the Software are licensed subject to the General Public License Version 2.0, a copy of which is attached as Exhibit A (the "GPL License"). You may not use these components except in compliance with the GPL License. In addition, you may have additional rights with respect to such components under the GPL License, including, without limitation, the right to obtain the source code for such components from us. You may obtain a copy of such source code by contacting us through the contact information provided on the Web Site. We will provide such source code in accordance with the GPL License.
I don't legally have the right to request the source code myself, because I don't own a UK NOOK yet. (Yeah, thinly veiled excuse for laziness!)
Click to expand...
Click to collapse
You're obviously not that lazy. Thanks for looking and gathering all of the extra info I need. I'll send B&N an e-mail and see what they say. I wouldn't be surprised if they didn't want to hand it out considering you can use it for an easy root setup and install the amazon and kobo stores which could financially damage their advance into new territories! What are we to do! Can't even subscribe to a newspaper or magazine through the nook store yet!
I'll let you know when / if I get a response
There is a setting in nook touch tools that you need to "arm," to allow software from unknown sources to be installed before the Amazon appstore can install software on a tinynooted device.
The setting is a tickbox, "Allow non-Market apps"
Untick it if it is ticked by default, then re-tick it to get apps to install.
roustabout said:
There is a setting in nook touch tools that you need to "arm," to allow software from unknown sources to be installed before the Amazon appstore can install software on a tinynooted device.
The setting is a tickbox, "Allow non-Market apps"
Untick it if it is ticked by default, then re-tick it to get apps to install.
Click to expand...
Click to collapse
Thanks for the reply but I actually tried that. No joy. However perhaps it is this that is not working and not amazon app store. Im just installing through ADB instead. I wonder if I can enable unknown sources through ADB. Something to look at I guess!
UK tinynoot attempt failing
loney01843 said:
Thanks for the reply but I actually tried that. No joy. However perhaps it is this that is not working and not amazon app store. Im just installing through ADB instead. I wonder if I can enable unknown sources through ADB. Something to look at I guess!
Click to expand...
Click to collapse
I tried using the tinynoot process from roustabout's thread here http://forum.xda-developers.com/showthread.php?t=1650593 and am stuck on the final reboot with a "Your NOOK is starting up..." message. Could you let me know if you used a different tinynoot method/set of files?
smerrett said:
I tried using the tinynoot process from roustabout's thread here http://forum.xda-developers.com/showthread.php?t=1650593 and am stuck on the final reboot with a "Your NOOK is starting up..." message. Could you let me know if you used a different tinynoot method/set of files?
Click to expand...
Click to collapse
Yep thats what I used. You on 1.2.0 and did you back up?
I didn't backup first and to get out of the starting message I used this:
http://forum.xda-developers.com/showthread.php?t=1289233&highlight=restore
Then I made a backup using this:
http://blog.the-ebook-reader.com/20...-and-restore-nook-glow-and-nook-simple-touch/
I hope this helps!
loney01843 said:
Yep thats what I used. You on 1.2.0 and did you back up?
I didn't backup first and to get out of the starting message I used this:
http://forum.xda-developers.com/showthread.php?t=1289233&highlight=restore
Then I made a backup using this:
http://blog.the-ebook-reader.com/20...-and-restore-nook-glow-and-nook-simple-touch/
I hope this helps!
Click to expand...
Click to collapse
Thanks for the tip on screen freeze but the link to the images on that post don't work for me. I am on 1.2 and made a backup before attempting any rooting - have managed to reinstate my original nook so quite pleased with myself.
Is there any point in rooting until someone can find a way of getting apps onto the 1.2 NSTG?
smerrett said:
Thanks for the tip on screen freeze but the link to the images on that post don't work for me. I am on 1.2 and made a backup before attempting any rooting - have managed to reinstate my original nook so quite pleased with myself.
Is there any point in rooting until someone can find a way of getting apps onto the 1.2 NSTG?
Click to expand...
Click to collapse
Great that you got a backup. If you want custom apps you can either wait for a different root kit or push ahead (since you have a safety net).
As I said, it worked for me.
If you don't mind searching for the .apk files you want you can use this:
Code:
adb connect ip.address.of.nook:portnumber
adb install app_of_your_choice.apk
This has worked fine for me so far. Just don't try for custom kernels yet as they seem to give me troubles.
I will work more on this tomorrow including adjusting framework for gapps.
loney01843 said:
Great that you got a backup. If you want custom apps you can either wait for a different root kit or push ahead (since you have a safety net).
As I said, it worked for me.
If you don't mind searching for the .apk files you want you can use this:
Code:
adb connect ip.address.of.nook:portnumber
adb install app_of_your_choice.apk
This has worked fine for me so far. Just don't try for custom kernels yet as they seem to give me troubles.
I will work more on this tomorrow including adjusting framework for gapps.
Click to expand...
Click to collapse
Thanks also for the code but as this is my first foray into rooting I think I'll hang around and watch for a bit! Perhaps if I start learning some more I may feel confident enough to try it.
Do you have copies of the files needed for the factory reset - the links are still not working for me.
Thanks again and sorry for bothering you. Hope tomorrow is productive for you.
smerrett said:
Thanks also for the code but as this is my first foray into rooting I think I'll hang around and watch for a bit! Perhaps if I start learning some more I may feel confident enough to try it.
Do you have copies of the files needed for the factory reset - the links are still not working for me.
Thanks again and sorry for bothering you. Hope tomorrow is productive for you.
Click to expand...
Click to collapse
http://dl.dropbox.com/u/13673492/n2T-Recovery_0.2.img
This is the file needed to force factory reset. However a quality backup like you have is far more important.
For anyone who wants to give this a go, here is a quick guide for root access and app installs using windows tools until I can make something more complete:
Make sure you use the CWM file suitable for your SD Card. I used "2gb_clockwork-rc2" because my card was 2gb+.
http://forum.xda-developers.com/showthread.php?t=1360994
(Thanks mali100)
Use WinImage with admin rights to restore CWM virtual hdd image to your SD.
Download tinynoot-1-of-2 and tinynoot-2-of-2
http://forum.xda-developers.com/showthread.php?t=1650593
(Thanks to eded333 and roustabout)
Put on CWM boot SD.
Install them in CWM back to back (I didn't bother with the restart in the middle as it should not make a difference considering the file content). After a restart you should have root access and an android launcher on your 1.2.0 Nook (among other files). If nook fails to boot one of the tinynoot files may have corrupted. Recover, Re-download and Retry!
Using ADB to install apps is easy. Extract this to your C drive:
http://dl.dropbox.com/u/13673492/ADB + Fastboot + Drivers.zip
Navigate to the folder in a cmd prompt.
Drop your APK into the same folder and on your nook open the "adbwireless" app and enable ADB
That app will tell you what your nooks IP address is.
Then you can:
Code:
adb connect ip.address.of.nook:portnumber
adb install app_of_your_choice.apk
Hopefully this more comprehensive guide will get others with this software to start playing around.
Click thanks if this guides helpful.
loney01843 said:
If nook fails to boot one of the tinynoot files may have corrupted. Recover, Re-download and Retry!
Navigate to the folder in a cmd prompt.
Drop your APK into the same folder and on your nook open the "adbwireless" app and enable ADB
That app will tell you what your nooks IP address is.
Then you can:
Code:
adb connect ip.address.of.nook:portnumber
adb install app_of_your_choice.apk
Hopefully this more comprehensive guide will get others with this software to start playing around.
Click thanks if this guides helpful.
Click to expand...
Click to collapse
Great - thanks to your more detailed instructions, I have persevered and the second attempt at installing the tinynoot zips worked. Your post gave me the confidence to try installing apks for the first time and for anyone else who is unfamiliar with the processes used, I found these two pages useful for:
navigating within a command prompt (how naive): pcstats.com/articleview.cfm?articleid=1723&page=3
Pasting text into a command prompt (ditto): megaleecher.net/Copy_Paste_Text_Dos_Window
Sorry, as a newb I'm not trusted to post outside links yet. It took a couple of attempts of pasting and pressing enter to work out how to install using the adb code but it's not as hard as I expected.
I have tried installing the 1 Mobile Market which works but it is unable to install apps itself (not enough space).
Also, I have just installed NoRefreshToggle and can't seem to get it to work. Any thoughts - is 1.2 to blame? Really want this to work as Business Calendar Free is just a series of blinks at the moment!
Great! I'm glad you pushed onward and have root.
I am going through possibilities of other ways to install apps and mods.
No refresh is something that I would like as well but I think that the framework may need editing for 1.2.0. For fast mode a new kernel will need to be made or existing one modified.
Be aware that installing kernels not designed for this firmware can give you some serious problems.
Once I can setup app markets, I will work on these other modifications.
Stay tuned :good:
Take a look at the overclock kernel - it's got a lot of the norefresh features baked in, and gives you a nice ability to control both clock and kernel tuning (via the governor control.)
You're right, you can flash the two zips back to back with no ill effect, I was mistaken about what the second zip was doing.
I mistyped when I typed "nook touch tools," I meant nook color tools.
I'm very interested that the amazon store is not working in 1.2. I will see if the software's available for my device, so I can try to see what's happened.
As of now, the us bn site does not mention an os 1.2 for the glowlight.

[TOOL] NEW! Derp -- scriptable, platform-neutral device installer

DERP (Device Environment Replacement Program)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
initial pre-alpha version 0.001
(Aug 3, 2013)
by fattire (twitter: @fat__tire)
tldr?​
Derp is a general-purpose, platform-independent installer, written in python with wxpython, that executes .derp XML-based scripts to walk the user step-by-step through a ROM installation (or do whatever you want.) The idea is to replace text-based walkthroughs, howtos, and installation instructions by requiring a user to do almost nothing but run a .derp script and sit back. Derp walks through a series of scripted steps (as in, say, a ROM installation) and automatically does all the file downloading/adb/fastboot stuff while the user waits and maybe reads what's happening (at the script author's discretion). Derp also pre-installs and keeps Google's Android SDK tools up to date and even gives adb & fastboot a simple UI. .derp scripts are human-readable XML. Embedding bash and python is also supported in Derp, as is restricting scripts or even script parts to certain platforms. Derp runs as root on the local computer (it's an installer after all), and is open source/GPLv3 licensed. It also comes with sample scripts and a built-in tutorial for creating your own.
Still tldr? It's a script-runner thing!
-----
LONGER DISCUSSION...​
WARNING: RIGHT NOW, DEVELOPER TYPES ONLY! This is not for end users...yet. Hopefully people will find bugs and help fix them before an end user uses this on a “live” computer with an actual device. Again, because this is a software installer, DERP AND ITS SCRIPTS RUNS AS ROOT. Never run random .derp or .xml scripts you find on the Internet. This could screw up your device AND your computer, so... treat it just like any other script you’d (not) run as root. Also, the discussion in this forum is how Derp is supposed to work, but of course, there may be (probably are?) bugs.
THE "PROBLEM" AS I SEE IT
Working on the CM wiki, I've grown to appreciate how varied firmware install methods can be. Some devices need rooting. Some need firmware downgrades. Sometimes you can use fastboot. Other times you can’t. Some systems need to unlock the bootloader, etc. etc.
Installing this stuff can be hard. Okay, maybe not for you, but how about your mom or dad? Could your grandparents buy a device today and put CM on it themselves? There's been some chatter on the interwebs about how to make rooting and replacing firmwares easier... some kind of graphical installer seems to be the answer. But there are a million devices out there...
So people have been using text-based HOWTOs, walkthroughs, step-by-step instructions, and/or shell scripts and batch-type files to do this. I thought maybe a generic, unified scripting method might work better that gives the users readable instructions but optionally automatically does technical steps for them.
Hoping to avoid creating yet-another-standard-way-to-do-something, back in February, I searched online for generic installation solutions. But they all seemed to be platform-dependent, or weren’t licensed for general use, or looked really ridiculously complicated....
So (and big caveat here-- I'm not a programmer!) I whipped up a proof-of-concept for developers to play with to start thinking about how to address the issue. It took me a few weeks to get going, but ended up sitting collecting dust for months as I worked on other things and occasionally bothered friends to test the latest version.
Derp is not necessarily intended as any kind of final solution per se-- it’s just for further discussion/testing. A totally legit question to be answered: is this in any way even a good idea?
Let's find out.
SO WHAT IS DERP?
It's a general-purpose installer, written in python with wxpython, that executes .derp XML-based scripts to walk the user step-by-step through a ROM installation, optionally doing all the "technical stuff" like downloading files and running commands in the background. Ideally, you wouldn't have to write a long tutorial for every platform on how to do stuff-- a .derp script could BE the walkthrough.
The first thing Derp does is install the latest adb and fastboot from Google. That looks like this:
(Mac version)
Next, when you run a .derp script, it can automatically download and verify ROM files like CyanogenMod or tools or whatever from the Internet, and then install them.
(Linux version)
(Mac version)
As it does all this, the script can provides information and/or feedback to the user via a UI that hopefully looks like a normal installer. What the user sees is written by the script author in simple HTML. As the .derp script runs, the user simply ftaps "Continue" to proceed through the scripted steps.
As mentioned, .derp scripts are written in XML, which is platform-generic and easy for a human to read. The .derp script syntax, explained below, is also very simple. The script author is also free to embed bash shell scripts or python (or both) if advanced stuff is needed.
Worth mentioning too-- sections, steps, text, actions, or entire scripts can be restricted by the type of computer its running on (ie, don't run certain python commands on Mac, but do run them in Linux, or whatever).
And finally-- while my initial thought was to use this for installations of ROMS like CyanogenMod to a device, I'd think Derp can be used for many kind of installations or scripted operations-- even to wrap a UI around a bash or python script to make it easier for users to run without having to open a Terminal and start typing. Derp scripts don't even have to have to be used for anything to do with mobile devices, though it does pre-set up the Google SDK tools for that purpose.
In fact, a Derp script can do NO actions-- simply serve as a click-through set of HTML-based instructional steps for a user to follow by hand. Conversely, it can say nothing to the user but "Stand by, doing everything." and that's it.
FEATURES:
Easy to install. Debian-based Linux just uses sudo dpkg -i derp_0.001-1_all.deb and it's ready to go. Mac users: it’s Derp.app. Done and done.
Derp is GPLv3-licensed and source code is available now. Read license for terms, conditions, and more disclaimers.
Automatically downloads/updates all SDK tools (primarily adb and fastboot) directly from Google at every launch. So the user is always up to date. (also requires users to agree to Google's T&C...)
Uses an XML-based, OS-neutral installation script format that is easy to write and understand. Just about anything you want the user to do-- restart in bootloader mode, unlock the device, etc-- the derp script should be able to do. Even run bash or python scripts from within the script.
XML Tags:
<derp> - the main tag for a derp script.
<section> - a major category for individual steps.
<step> - Put as many of these in a section as you want.
<info> - The stuff the user sees as the script runs. You can add HTML tags to make it look good.
<file> - tell derp a file’s URL, MD5/SHA hash, and local filename. Derp will grab it and verify it for you automatically. These files can be roms, scripts, recovery images, etc. whatever your script needs to do its job.
<action> - valid “action” types include “adb”, “fastboot”, “python”, and “bash”. Future versions of Derp can add more. <action> allows your script to do stuff. Never worry about whether the user installed and set up the latest versions of adb or fastboot properly. They should "just work".
Using the above tags, you can not only have your scripts automatically do full installations, rooting, bootloader unlocks, etc, but simultaneously tell the user what’s happening behind the scenes if you choose. The user feedback is written in standard HTML-formatted text. The user just hits “Continue” whenever you want to move from one step to the next.
Included are example scripts to install CyanogenMod 10.1.2 on stock Nexus 7, Nexus 4, Galaxy Nexus, and HTC One. The latter script, written by Cowmix, demonstrates how to embed python to interact with the user, and they all include bootloader unlocking.
The only things I can think of that can’t be done automatically are steps that requires hands-on (ie, holding down buttons during power-on) or where, say, debugging mode needs to be manually turned on, or the slider needs to be physically unlocked. In the few cases where user involvement can’t be avoided, the <info> tag can be used to walk them in “real time” through that step.
A built-in tutorial on how to write your own .derp scripts explain how the tags work. (The tutorial itself is a .derp script.)
A console window helps you see what derp is doing in real-time...
Also included: a quick-access adb and fastboot text-entry in the console. This lets you start up Derp and type quick adb or fastboot commands without needing a terminal (or to deal with PATH issues)
“Debug Mode” lets you go through the script without invoking the <action> tags. Makes writing scripts easy.
Derp should automatically detect when a device is connected via adb or fastboot and let you know.
You may filter any Derp tag (including <action> tags) by operating system. This means that using a single script, the user can see different text or the script may behave differently depending on the platform. In fact, you can restrict the entire script to a particular operating system(s).
The script doesn’t actually have to “do” anything. It can be used simply to create walkthroughs or tutorials in a much nicer format than a step-by-step text file. Just link to a .derp file and let it walk the user through whatever. Easy to convert a text walkthrough to an interactive click-through just by adding <section> and <step> tags.
WHY MUST DERP RUN AS ROOT?
Remember, Derp is an installer. It needs to do important stuff, and as such it runs as root. I had considered trying to sandbox the parts that "needed" root and only enable it there and ask for permission for a single operation via an "enter your password" type of dialog box. But because the .derp format is so flexible, there were a million potential places where a script author could do varying kinds of trickery-- by breaking out of Derp to execute python code, spoofing directory paths, abusing the embeddable bash scripts, etc. It just didn't seem to make sense to try to anticipate and counteract all that. Playing cat-and-mouse endlessly is pointless. Again, Derp is an installer. Installers get administration permissions. Just like any installation script you'd run with "sudo" would get. Just like the package installer on OS X. Also, it is much easier to run adb and fastboot with root permission-- you can easily kill all running versions of adb for example, and fastboot seems to prefer it. Plus, it avoids the need for playing with udev configuration stuff in Linux.
This means that, like pretty much every other type of installer, .derp scripts will have full access not only to your mobile device, but to the computer Derp is running on. This seems to make the most sense to me, but I invite others to chime in on improving the design if you disagree.
All caveats and considerations apply. Do not run untrusted scripts, and do not run Derp on a "sensitive" computer (however you wish to define that).
WHAT IS MEANT BY "CROSS-PLATFORM"? (IN OTHER WORDS, WHERE'S THE WINDOWS VERSION?!)
I don't have/use Windows. Right now, Mac & Linux builds are currently available. Derp still needs to be ported to Windows, but since it’s wxpython, and I tried to make as little dependent on the underlying operating system, 95% of the work is hopefully done. Anyone with Windows who’d like to help, let me know.
I think it should be some minor changes to the setup.py file and a few definitions. Also, not sure if Windows supports the “bash” shell...
ANYTHING ELSE?
Ummm... That’s it. Remember, this is a work in progress and a proof of concept... Again, I dunno if anyone will see the value here, and maybe it will need a complete rethink. There are likely to be bugs, maybe even really bad ones. But after a few months of playing around, I kinda feel it’s ready for other developers to at least see and even try in a secure environment (as suggested, maybe a VM or something).
SHOW ME THE CODE!
The code is on github-- please submit commits-- fixes, new features, whatever-- as well as bug reports there. And again, figure there will be tons of bugs to be squashed.
Enjoy.
fattire (@fat__tire)
THANKS TO...
Big thanks for helping me test w/different devices: cowmix, hashcode, kornyone, ciwrl, utkanos, verygreen, and jeagoss
DOWNLOADS:
Debian-based Linux (Debian, Ubuntu, Mint)
derp_0.001-1_all.deb
MD5: 6e8eabe94cdfdba649ea41198211bb64
SHA512: 307aed0ad79de17793bb445d2b588388bf66b42716de36a055227f555bfc12ab3e61d5f0e3de804eb4c0c560f140a6318ea6dd1608cc78ee84b50336895cdfc2
Mac OS X (Tested on: Snow Leopard, Lion, Mountain Lion)
Derp-v0.001-mac.zip
MD5: b738e0a270f53d274baec0ce121577fb
SHA512: 3cf7d438c4dfd0c5c5d7c2f29fe19a76dcbb728acfe73a24e28cdb3f21624510c94f1c4224ad31118851f17205e4d7152619c15281c98189cb33ccac82c1505a
Source code on GITHUB is here.
SAMPLE DERP SCRIPTS
Nexus 7 stock to CM 10.1.2 installer - included (written by me)
Nexus 4 stock to CM 10.1.2 installer - included (written by me)
HTC One stock to CM 10.1 nightly installer - included (written by cowmix)
Galaxy Nexus stock to CM 10.1.2 installer - included (written by cowmix)
EXTERNAL SCRIPTS BY OTHERS
None yet...?
DONATIONS?
Not to me, please. If you feel the need to give someone money, consider donating to the EFF or the Software Freedom Law Center. It's really a donation to your digital rights. (I'm not affiliated with them except as a huge fan and occasional donor.)
REMEMBER, DERP IS EXPERIMENTAL AND YOU RUN IT AT THE RISK OF YOUR COMPUTER, YOUR DEVICE, AND YOUR VERY EXISTENCE AS A HUMAN BEING. I TAKE NO RESPONSIBILITY FOR WHAT DOES OR DOESN'T HAPPEN. DON'T RUN DERP SCRIPTS YOU DON'T TRUST COMPLETELY. YOU ARE ADVISED, JUST IN CASE, TO ONLY RUN SCRIPTS IN A SANDBOXED VIRTUAL COMPUTER. And let me know what y'all think.
Script Syntax (Tutorial)
SCRIPT SYNTAX​
So you want to write a Derp installation script? It's easier than you might think. Derp isn't too complicated-- it doesn't have a lot of "logic". It just follows a script and does what you tell it.
To start a script file, just get out any text editor (or XML editor) and name it something with the .derp file extension, such as:
sample.derp
Once you write up a sample script, you can load the file with Derp to see if it works.
The <derp> tag
Every script starts with the <derp> tag and ends with the </derp> tag. Within the "<derp>" tag, at least for this pre-alpha version, you need to put at least one required attribute, app_version:
<derp app_version="0.001">
</derp>
This is to identify the version of Derp that your script is for. Future versions may not support your script. You can put other attributes that might be used in the future:
<derp device_codename="mako" os="Linux Darwin" title="CM10.1-M1 for Mako" device_name="Nexus 4" device_vendor="lge" app_version="0.001" script_version=".5" author = "fattire" author_email="[email protected]" author_twitter="@fat__tire" license="GPLv2">
These additional tags may be required in future versions of Derp, so if you are able to supply 'em, it's recommended. They'll simply be ignored if they're not needed.
The title="CM10.1-M1 for Mako" is a general title for the script. VERY briefly explain what it does. It's not required, but recommended.
The one other important attribute, os="Linux Darwin", will be explained later. For now, just know that it is optional, but you can use it to restrict the whole script to only run only in certain operating systems.
The <section> tag
Every set of instructions should be divided into logical sections, such as the ones on the left. The section has its own required attribute, the name:
<derp app_version="0.001" os="Linux Darwin" script_version=".5">
<section name="This is the first section"></section>
</derp>
Notice the name attribute is used with a section to identify what the section is for.
There's not much more to say about sections. It's easy. Let's move on.
The <step> tag
Each Section can be made of (at least one but) an unlimited number of individual steps. And the tag for that is called <step>. Here's how it's used:
<derp app_version="0.001" script_version=".5">
<section name="This is the first section">
<step name="This is step one"></step>
<step name="This is step two"></step>
</section>
<section name="This is the second section">
<step name="This is step three"></step>
<step name="This is step four"></step>
</section>
</derp>
Notice that steps, like sections, need to have a designated name attribute so that Derp knows what to display. The step name will appear to the user at the top on the right as the centered step heading.
The <info> tag
The stuff that appears in the main info area should be wrapped in info tags.
Example:
<derp app_version="0.001" script_version=".5">
<section name="This is the first section">
<step name="This is step one">
<info>This is the text you'll see! It explains what's going on to the user. <b>I'm bolding this part because it's really important for the user to see.</b></info>
</step>
</section>
</derp>
Note: The stuff that you put between the <info> and </info> tags is...HTML!
So you can format it however you want. You can even include images from the Internet.
Here is the list of HTML tags that are recognized:
A NAME=[string]
HREF=
TARGET=[target window spec]
ADDRES... can add os="Linux Darwin" to the <derp> tag.
RESERVED
RESERVED
Derp
Derp is a pretty slick interface for scripting not only device installation, but resources needed for modifications on Android devices (namely the Android SDK). A developer can create a custom script to automate the installation, decreasing one off bad installs, and ensuring the process is completed as intended.
People new to Android customization or developers could find this of use. I am excited to see where it goes.
kornyone said:
Derp is a pretty slick interface for scripting not only device installation, but resources needed for modifications on Android devices (namely the Android SDK). A developer can create a custom script to automate the installation, decreasing one off bad installs, and ensuring the process is completed as intended.
People new to Android customization or developers could find this of use. I am excited to see where it goes.
Click to expand...
Click to collapse
Thanks.. BTW for those asking about the Windows port (in IRC)...
I simply don't have windows, but it was written to be as platform generic as possible. Anyone with a tiny amount of programming skills (again, I have zero myself) should be able to add Windows compatibility pretty quickly... I think it's a matter of just fixing that setup.py file to work with py2exe. See here for more info.
fattire said:
Thanks.. BTW for those asking about the Windows port (in IRC)...
I simply don't have windows, but it was written to be as platform generic as possible. Anyone with a tiny amount of programming skills (again, I have zero myself) should be able to add Windows compatibility pretty quickly... I think it's a matter of just fixing that setup.py file to work with py2exe. See here for more info.
Click to expand...
Click to collapse
Windows dev here, I may be able to help. Also, any interest in a Mono version? Looking for an excuse...
fattire said:
Thanks.. BTW for those asking about the Windows port (in IRC)...
I simply don't have windows, but it was written to be as platform generic as possible. Anyone with a tiny amount of programming skills (again, I have zero myself) should be able to add Windows compatibility pretty quickly... I think it's a matter of just fixing that setup.py file to work with py2exe. See here for more info.
Click to expand...
Click to collapse
Grats BTW, great idea...
I've come across several usages of Linux only Python functions so far and I don't see drop-in alternatives for Windows, so I've just commented out that particular section (line 1183). I managed to get the tool download working. Suggestion, maybe sticking with MD5 hashes would be simpler as the script receives updates to match Android SDK download updates. I can understand why you would want to use SHA512, but google offers MD5 on the site next the downloads for simple copy/paste replacement. There's the potential for lots of hard-coded configuration and for those configurations to be platform specific, such as the download folders for tool updates. I'll see if I can finish up the first bit of win compat this afternoon, but my Android device is at work and is a Dell Streak at that, so my test options are a bit limited.
http://docs.python.org/2/library/platform.html
1183 - os.geteuid()
1196 - os.uname()
fork:
https://github.com/strvmarv/derp
screen:
Windows... already?!!
Holy crap! I don't think it's been 12 hours and there's an early windows port.. amazing job!
The unix-only stuff was from a last second addition I did when I realized that dero would try to run on ARM-based linux machines. The easy fix is to simply indent everything past:
if platform.system() == "Linux"
so that the if not os.geteuid() == 0: and testarch = os.uname() stuff is conditional on it running Linux. (Unless there's a windows ARM version, in which case it also won't work).
In both cases it would work except for the fact that Google doesn't provide libraries for ARM. Interestingly though, debian does. So if we REALLY wanted, we could just apt-get install the tools for ARM Linux users. But that would (1) require a debian-based version of Linux, and (2) we wouldn't know that adb/fastboot/etc are the very latest from Google. But it might be a good version .002 feature, with a preference to turn it on or something.
Again, amazing work. Keep it up!
strvmarv said:
http://docs.python.org/2/library/platform.html
1183 - os.geteuid()
1196 - os.uname()
Click to expand...
Click to collapse
fattire said:
Holy crap! I don't think it's been 12 hours and there's an early windows port.. amazing job!
The unix-only stuff was from a last second addition I did when I realized that dero would try to run on ARM-based linux machines. The easy fix is to simply indent everything past:
if platform.system() == "Linux"
so that the if not os.geteuid() == 0: and testarch = os.uname() stuff is conditional on it running Linux. (Unless there's a windows ARM version, in which case it also won't work).
In both cases it would work except for the fact that Google doesn't provide libraries for ARM. Interestingly though, debian does. So if we REALLY wanted, we could just apt-get install the tools for ARM Linux users. But that would (1) require a debian-based version of Linux, and (2) we wouldn't know that adb/fastboot/etc are the very latest from Google. But it might be a good version .002 feature, with a preference to turn it on or something.
Again, amazing work. Keep it up!
Click to expand...
Click to collapse
Good deal, glad I could help. If you ever want to give a Mono/GTK# port a try just give me a shout. I could do the majority of the leg work code in C# very quickly, lightweight app, which is excellent these days.
I just pushed up my initial changes for the setup.py. I haven't figured it out yet, there are some imports, specifically in derp.py line 23 (platform) that aren't getting consolidated into the build with py2exe. It's most definitely how I've setup the options in the setup.py, hopefully someone is more familiar with py2exe than I and can provide some insight.
strvmarv said:
Good deal, glad I could help. If you ever want to give a Mono/GTK# port a try just give me a shout. I could do the majority of the leg work code in C# very quickly, lightweight app, which is excellent these days.
I just pushed up my initial changes for the setup.py. I haven't figured it out yet, there are some imports, specifically in derp.py line 23 (platform) that aren't getting consolidated into the build with py2exe. It's most definitely how I've setup the options in the setup.py, hopefully someone is more familiar with py2exe than I and can provide some insight.
Click to expand...
Click to collapse
Okay, let me take a second and fix the bug I described above... then-- damn, I wish I could try the setup.py myself. So you're saying that the platform stuff doesn't get imported into the build for some reason?
Standby for the fix.. just gotta test it and stuff.
Update: Pushed. Also added /build, /dist, and one other mac build-related directory to .gitignore to make things a little easier to see...
strvmarv said:
I haven't figured it out yet, there are some imports, specifically in derp.py line 23 (platform) that aren't getting consolidated into the build with py2exe. It's most definitely how I've setup the options in the setup.py, hopefully someone is more familiar with py2exe than I and can provide some insight.
Click to expand...
Click to collapse
Question, would doing something like this on line 52 do anything:
options = {'py2exe': {'bundle_files': 1, 'optimize': 2, 'compressed': 1,}},
I think you can also do something like:
includeList=["a list", "of modules", "to include"]
first, and then replace the line above with something like...
options = {'py2exe': {'bundle_files': 1, 'compressed': 1, 'optimize': 2, 'includes': includeList}},
see more info here and let me know if the above gets those modules in there! I see some option called "unbuffered".. dunno if that needs to be set to true.
bundle_files to 1 means that it hopefully will end up being a self-contained .exe
Let me know! Thanks!
Suggestion, maybe sticking with MD5 hashes would be simpler as the script receives updates to match Android SDK download updates. I can understand why you would want to use SHA512, but google offers MD5 on the site next the downloads for simple copy/paste replacement.
Click to expand...
Click to collapse
Forgot to answer this. You're totally right that MD5 is the one Google provides, and at first I used MD5 for everything-- then sluo reprimanded me, told me how MD5 can't be taken seriously any more, that it's really really easy for anyone to create a MD5 spoofed file these days... So I figured, since this runs as root, it's better to be very extra super-cautious and make absolutely sure the right file is downloaded
Of course, in a user-provided script, you can use md5s or whatever the author wants, but for the Android tools themselves I figured it was better practice to use SHA512 to be more forward/future looking and make sluo (a *real* programmer) happy
More work done by hashcode on a windows port
Okay strvmarv and other windows folk--
Hashcode helped me out by testing on his machine that has Windows.. we did a little debugging, and the result are these two commits:
Pull Request #1
He was able to run derp successfully and do adb/fastboot commands from the Console interface.
But because he's using win64, he couldn't build (apparently only win32 supports building .exe files) all the way.
So, if you have a win32 system-- after applying these, does python setup.py py2exe build an .exe?
Questions:
* on win32 does it build into an .exe?
* If so, does the .exe run properly as the administrator-- right-click and select "Run as Administrator" I am told
* if so, does it install the android tools and ask you to agree to the License?
* if so, does it download/detect your devices?
* if so, can you run scripts (does it work?)
Note: You may also need to manually install Java, since the android sdk updater uses java.
I'm wondering too if the installer installs any drivers, and/or if any were needed.
Thanks!
fattire said:
Okay, let me take a second and fix the bug I described above... then-- damn, I wish I could try the setup.py myself. So you're saying that the platform stuff doesn't get imported into the build for some reason?
Standby for the fix.. just gotta test it and stuff.
Update: Pushed. Also added /build, /dist, and one other mac build-related directory to .gitignore to make things a little easier to see...
Click to expand...
Click to collapse
Awesome, will take a look tonight. It's very likely I'm just not setting the options in the setup.py correctly.
You're running snow leopard, correct? You could grab a copy of the Windows 8.1 Preview (free until Jan something I believe - http://preview.windows.com) and dual-boot, or even just run a VM...if you wanted. I had to install Python 2.7 x86, wxPython x86, python2exe x86, and then run derp.py from source directly (powershell or cmd) to get where I'm at now.
strvmarv said:
Awesome, will take a look tonight. It's very likely I'm just not setting the options in the setup.py correctly.
You're running snow leopard, correct? You could grab a copy of the Windows 8.1 Preview (free until Jan something I believe - http://preview.windows.com) and dual-boot, or even just run a VM...if you wanted. I had to install Python 2.7 x86, wxPython x86, python2exe x86, and then run derp.py from source directly (powershell or cmd) to get where I'm at now.
Click to expand...
Click to collapse
Ideally I'd like to test it on a win32 system because that's the one that py2exe will make a .exe for. But that said, hashcode has it running and adb installs and works and such. It's now a matter of getting it packaged up properly I think. If you can double-check that it works for you, that would be a good start. Then hopefully the .exe can be made. It should also check to make sure java is installed (which is needed by the Google updater) and if not, maybe help the user do it (or even do it for them)...
Also, his version of windows already had drivers on them, so we're not sure whether derp (well, the android tools installer from Google) will take care of that or not.
One last note-- you may have had problems with the looping downloads because the sha512sum seemed to have been off. I did my own sha and it was different.. The new one worked for hashcode.. it's in his commit linked above..
Thanks!
fattire said:
Okay strvmarv and other windows folk--
Hashcode helped me out by testing on his machine that has Windows.. we did a little debugging, and the result are these two commits:
Pull Request #1
He was able to run derp successfully and do adb/fastboot commands from the Console interface.
But because he's using win64, he couldn't build (apparently only win32 supports building .exe files) all the way.
So, if you have a win32 system-- after applying these, does python setup.py py2exe build an .exe?
Questions:
* on win32 does it build into an .exe?
* If so, does the .exe run properly as the administrator-- right-click and select "Run as Administrator" I am told
* if so, does it install the android tools and ask you to agree to the License?
* if so, does it download/detect your devices?
* if so, can you run scripts (does it work?)
Note: You may also need to manually install Java, since the android sdk updater uses java.
I'm wondering too if the installer installs any drivers, and/or if any were needed.
Thanks!
Click to expand...
Click to collapse
* on win32 does it build into an .exe?
- I'm not win32, I'm running 8.1 x64, but it builds/executes just fine if you're using the 32 bit versions of Python, wxPython, and py2exe due to WOW64, long story
- It does build into an exe, see screen
Output
View attachment output.txt
Screen of dist folder
* If so, does the .exe run properly as the administrator-- right-click and select "Run as Administrator" I am told
- I'm running it with Run as Administrator, no, it still seems to blow up and stop running when it get's to __init__, it appears it can't find it for some reason when built with py2exe, likely the need for inclusion, not exactly sure yet...hard to capture error since it flashes by very quickly and then the console closes
* if so, does it install the android tools and ask you to agree to the License?
- If I run derp.py directly in Python it works just fine, android tools, etc...I haven't tried a script yet
* if so, does it download/detect your devices?
- I haven't tried a script yet
* if so, can you run scripts (does it work?)
- Ditto
Note: You may also need to manually install Java, since the android sdk updater uses java.
- Java SDK already installed, I dabble in Android
These missing modules indicated in build output worry me, not certain how to install them...
The following modules appear to be missing
['Carbon', 'Carbon.Files', 'ElementC14N', '_scproxy', '_sysconfigdata', 'win32api', 'win32con', 'win32pipe']
I've pulled a fresh copy of your repo, added Hashcodes changes, and tweaked the setup.py according to what I've found so far. Still blowing up as indicated above, but still moving in the right direction. If you want to go ahead and merge Hashcode's pull and ignore mine I'll reapply my changes so things don't get weird.
Pull request 2: https://github.com/fat-tire/derp/pull/2
I'll look over py2exe documentation and see if I can figure out what we need to change.
Ah, now we're getting somewhere, I changed console=["src/derp.py"] to windows=["src/derp.py"] as indicated here http://www.py2exe.org/index.cgi/ListOfOptions , get an error on execute, which is dumped into a text file, and looks like this...
Traceback (most recent call last):
File "derp.py", line 48, in <module>
NameError: name '__file__' is not defined
Any ideas?
scriptFolder = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "scripts/")
UPDATE:
This may help...
http://stackoverflow.com/questions/...e-path-of-the-current-executed-file-in-python
Nice.. thanks!
strvmarv said:
* on win32 does it build into an .exe?
- I'm not win32, I'm running 8.1 x64, but it builds/executes just fine if you're using the 32 bit versions of Python, wxPython, and py2exe due to WOW64, long story
Click to expand...
Click to collapse
Ah, cool.
- It does build into an exe, see screen
Output
View attachment 2167579
Screen of dist folder
View attachment 2167586
* If so, does the .exe run properly as the administrator-- right-click and select "Run as Administrator" I am told
- I'm running it with Run as Administrator, no, it still seems to blow up and stop running when it get's to __init__, it appears it can't find it for some reason when built with py2exe, likely the need for inclusion, not exactly sure yet...hard to capture error since it flashes by very quickly and then the console closes
Click to expand...
Click to collapse
The file size looks tiny... it looks like it doesn't build into it all the stuff it needs...
* if so, does it install the android tools and ask you to agree to the License?
- If I run derp.py directly in Python it works just fine, android tools, etc...I haven't tried a script yet
Click to expand...
Click to collapse
^ This is awesome and a good sign for this working once we get the build finished.
* if so, does it download/detect your devices?
- I haven't tried a script yet
* if so, can you run scripts (does it work?)
- Ditto
Click to expand...
Click to collapse
Now that I think about it-- the "welcome" stuff and auto-download of the tools are all a running .derp script (welcome.derp) so yes, you are running them
These missing modules indicated in build output worry me, not certain how to install them...
The following modules appear to be missing
['Carbon', 'Carbon.Files', 'ElementC14N', '_scproxy', '_sysconfigdata', 'win32api', 'win32con', 'win32pipe']
Click to expand...
Click to collapse
Hmm.. Did you try adding them explicitly in the optionList as I suggested above?
And another way to do it is to use the -p and -i paremeters when you do python setup.py py2exe
Also maybe try adding:
import win32com
after "import py2exe" in setup.py I saw some reference to that somewhere...
What else...
looks like elementc14n is something related to the elementree module of python... win32api is here I think... but I think it would be installed when you installed python to begin with.
I've pulled a fresh copy of your repo, added Hashcodes changes, and tweaked the setup.py according to what I've found so far. Still blowing up as indicated above, but still moving in the right direction. If you want to go ahead and merge Hashcode's pull and ignore mine I'll reapply my changes so things don't get weird.
Pull request 2: https://github.com/fat-tire/derp/pull/2
I'll look over py2exe documentation and see if I can figure out what we need to change.
Click to expand...
Click to collapse
I'm looking too... See this?
For py2exe to work with packages loaded during runtime, the main thing seems to be that u explicitly import the modules needed by your app somewhere in your app. And then give py2exe in setup.py with moudlefinder.AddPackagePath( , ) the hint, where to search for modules it couldn't find by std. introspection. in the app
I won't do a full-on pull to the repo until everything is working and tested against linux/mac just to make sure we're only fixing stuff and not breaking the other platforms in the process
strvmarv said:
Ah, now we're getting somewhere..
UPDATE:
This may help...
http://stackoverflow.com/questions/...e-path-of-the-current-executed-file-in-python
Click to expand...
Click to collapse
Ah yes-- does this help as recommended in the link above..?
http://www.py2exe.org/index.cgi/WhereAmI
fattire said:
Ah yes-- does this help as recommended in the link above..?
http://www.py2exe.org/index.cgi/WhereAmI
Click to expand...
Click to collapse
jpath wouldn't pull in for some reason, despite installing via pip and having an import, so I resorted to logic to assign "." as the path (very hacky)...
So, here it is...running from derp.exe compiled with py2exe...when I get a moment I'll put together a quick summary of how to get a local win environment going..
Here's another pull:
https://github.com/fat-tire/derp/pull/3
UPDATE:
Ack, storing sdk tools in Program Files\Common Files is great and everything, but it needs to be store in Program Files (x86)\Common Files since it's x86 compiled. Pretty sure things may go wrong at some point as it is...

My setup with Ubuntu and a custom permissive Kernel

Hey everyone. I bought this device specifically because I do a lot of work on linux in command line world and I though it would be the perfect device when combined with the Logitech Pro keyboard and Complete Linux Installer (it's an app on Google Play). It turned out to be quite a bit of work getting everything working because of Knox and SELinux. Eventually I got a custom kernel working that allows me to toggle SELinux between permissive and enforcing.
I attached an Odin flashable tar that works on the SM-P900 (wifi version). I am on the North American version, so I have no idea whether it will work in other regions. If you flash this kernel then there are a few things you need to know:
I'm assuming you already have root on your device.
When you boot it will still be in "Enforcing" mode. This change simply allows you to use the "setenforce" terminal command or any of the apps on Google Play that do this for you.
You might experience some wifi weirdness after you flash the kernel. You just need to open up /system/build.prop and change ro.securestorage.support from true to false and then reboot to resolve the issue.
If you have a different version of the device or want to compile it yourself for any reason I wrote an article describing how I compiled it here:
http://graemehill.ca/compiling-permissive-android-kernel/
I also did a few other things to fix the keyboard and get linux running properly, so if you're interested in that I described my setup in more detail here:
http://graemehill.ca/turning-a-galaxy-note-pro-into-a-linux-laptop/
Thank you for this!
Sent from my SM-P900 using Tapatalk
trying to build kernel
I'm trying to follow your guide to compile a kernel from source. I have installed (on my Win 8.1_64 PC) Android SDK/NDK. GnuWin32, JavaJRE, and downloaded SM-P900 kernel source.
I'm getting errors at "Apply Kernel Config" step.
here's the output: http://pastebin.com/yFqDrNY8
Thanks for your help
Don :good:
dodo99x said:
I'm trying to follow your guide to compile a kernel from source. I have installed (on my Win 8.1_64 PC) Android SDK/NDK. GnuWin32, JavaJRE, and downloaded SM-P900 kernel source.
I'm getting errors at "Apply Kernel Config" step.
here's the output: http://pastebin.com/yFqDrNY8
Thanks for your help
Don :good:
Click to expand...
Click to collapse
It looks like you're in Windows. To my knowledge it is not possible to compile a Linux kernel in windows. I would recommend downloading virtual box and installing some Linux distro in there. This is what I was talking about in the "environment" section at the top of the article.
For android development I find that you need access to a lot of tools where some are only available on Windows and others are only available on Linux so a Windows PC with a Linux VM is ideal in my opinion.
Oh ok, no problem. I just misread the guide. I've setup a build environment in a vm before to compile aosp for my Nexus 10. Shouldn't be too hard to do it again. I recently rebuilt my pc so the vm I had got nuked.
Sent from my SM-P900 using Tapatalk
ok I got my Ubuntu VM up and running using this guide
http://forum.xda-developers.com/showpost.php?p=50748836&postcount=25
installed android NDK to ~android/NDK, and unzipped the kernel source to ~android/kernel
followed your guide to build a SELinux permissive kernel but i'm getting some errors when trying to compile. here's the output:
http://pastebin.com/Npdu7J5h
EDIT: retried doing the EXPORT command and now it seems to be compiling
dodo99x said:
EDIT: retried doing the EXPORT command and now it seems to be compiling
Click to expand...
Click to collapse
When you export a variable in the terminal it only exists for that one session, so if you open a new terminal instance you need to run the command again. If you want to set it permanently normally you can just put the export command into ~/.bashrc
Oh I see. I'll give that a try. I was able to create a new boot.img following the rest of your guide. I have yet to try flashing it though. Will have to find some info about all the kernel options that can be set. Hopefully be able to integrate HMP to get all eight cores running at the same time.
Sent from my SM-P900 using Tapatalk
Cool, let us know how that goes. I wonder how much it would affect battery life.
Graeme H said:
Hey everyone. I bought this device specifically because I do a lot of work on linux in command line world and I though it would be the perfect device when combined with the Logitech Pro keyboard and Complete Linux Installer (it's an app on Google Play). It turned out to be quite a bit of work getting everything working because of Knox and SELinux. Eventually I got a custom kernel working that allows me to toggle SELinux between permissive and enforcing.
I attached an Odin flashable tar that works on the SM-P900 (wifi version). I am on the North American version, so I have no idea whether it will work in other regions. If you flash this kernel then there are a few things you need to know:
I'm assuming you already have root on your device.
When you boot it will still be in "Enforcing" mode. This change simply allows you to use the "setenforce" terminal command or any of the apps on Google Play that do this for you.
You might experience some wifi weirdness after you flash the kernel. You just need to open up /system/build.prop and change ro.securestorage.support from true to false and then reboot to resolve the issue.
If you have a different version of the device or want to compile it yourself for any reason I wrote an article describing how I compiled it here:
http://graemehill.ca/compiling-permissive-android-kernel/
I also did a few other things to fix the keyboard and get linux running properly, so if you're interested in that I described my setup in more detail here:
http://graemehill.ca/turning-a-galaxy-note-pro-into-a-linux-laptop/
Click to expand...
Click to collapse
I tried to install this using VBox Odin and I couldnt get it to work. Tried using BOOTLOADER and also PDA. Not sure the correct one but neither worked for me. Also, Moblie ODin hasnt yet worked but when it does, things will be much easier for me at least.
I have a newly rooted SM-900. I will have to find time someday to compile the kernel against what I have. Must be a slightly newer version than the one you posted. That is only thing I can think since I just got my 12.2. Thanks for the detailed info.
Camera?
Hey, thanks for the great kernel. It's working as expected to enable permissive mode, but I'm having one issue with it. When I use your kernel, the camera is disabled (says something like "Camera Failed"), and it won't work even when trying different software besides stock, like Google Camera. Anyway, clearing cache, etc. doesn't do anything, but the camera works again when I flash the stock kernel. Is this related to permissive mode or something else with the settings?
aarstar said:
Hey, thanks for the great kernel. It's working as expected to enable permissive mode, but I'm having one issue with it. When I use your kernel, the camera is disabled (says something like "Camera Failed"), and it won't work even when trying different software besides stock, like Google Camera. Anyway, clearing cache, etc. doesn't do anything, but the camera works again when I flash the stock kernel. Is this related to permissive mode or something else with the settings?
Click to expand...
Click to collapse
The camera fails for me too. I dumped a logcat and isolated the issue here:
W/ActivityManager( 2746): Permission Denial: get/set setting for user asks to run as user -2 but is calling from user 0; this requires android.permission.INTERACT_ACROSS_USERS_FULL
V/ApplicationPolicy( 2746): isApplicationStateBlocked userId 0 pkgname com.google.android.GoogleCamera
But... the camera is not a huge deal. It did, however, break wifi. I did not get a logcat of that yet, but I would assume it is also a permission issue.
Wifi works for me using the fix mentioned in the OP. Also, thanks for looking into the camera issue. I agree it's not a big deal, and it's easily fixed by flashing the stock kernel, until someone figures out a proper fix.
aarstar said:
Wifi works for me using the fix mentioned in the OP. Also, thanks for looking into the camera issue. I agree it's not a big deal, and it's easily fixed by flashing the stock kernel, until someone figures out a proper fix.
Click to expand...
Click to collapse
Wow, I totally missed that entire line in the OP... You literally just made my whole day. I fought this all day long, desperate to get ubuntu working. Thank you for pointing that out.
I get "xt_mark.h" is missing (no such file or directory) error. Any idea why that may be?
I'm using the source for p900 international hoping that I may sidestep the camera issue that way (by enabling permissive to the international kernel I mean), but as it stands it does not compile.
I've googled it but until now it was/is to no avail...
Graeme H said:
Hey everyone. I bought this device specifically because I do a lot of work on linux in command line world and I though it would be the perfect device when combined with the Logitech Pro keyboard and Complete Linux Installer (it's an app on Google Play).
Click to expand...
Click to collapse
Hey Graeme H,
we both have the same intention. I am downloading the international Kernel at the moment and will compile it again for you guys. The download takes a little longer as I am at vacations.
I am going this route: doviak.net/debian-kit/debian-kit_p00.html . In the future I would like to have arch linux running on this device but a customized debian would be okay for the beginning, too.
Eventually I will try to use framebuffer instead of vnc or something like that. I would love to use sublime-text and dwm on that device with that resolution
Good luck guys. I will try to update.
Edit: hehe I have dwm in front of me now and the resolution is so high that I am barely able to read
Compiled the kernel and flashed in on my device but my camera is still not working. Maybe we need to edit the config:
# Camera sensor devices
#
# CONFIG_VIDEO_OV7670 is not set
# CONFIG_VIDEO_VS6624 is not set
# CONFIG_VIDEO_MT9M032 is not set
# CONFIG_VIDEO_MT9P031 is not set
# CONFIG_VIDEO_MT9T001 is not set
# CONFIG_VIDEO_MT9V011 is not set
# CONFIG_VIDEO_MT9V032 is not set
# CONFIG_VIDEO_TCM825X is not set
# CONFIG_VIDEO_SR030PC30 is not set
# CONFIG_VIDEO_NOON010PC30 is not set
CONFIG_VIDEO_S5K6B2=y
# CONFIG_S5K6B2_CSI_C is not set
CONFIG_S5K6B2_CSI_D=y
CONFIG_S5K6B2_POSITION_FRONT=y
# CONFIG_S5K6B2_POSITION_REAR is not set
CONFIG_VISION_MODE=y
# CONFIG_VIDEO_M5MOLS is not set
# CONFIG_VIDEO_S5K6AA is not set
Click to expand...
Click to collapse
Rather than each people compiles its kernel, could someone put a link to download the international kernel compiled? I think this would allow more people to get this kernel. Thank
PHP:
smylion said:
Rather than each people compiles its kernel, could someone put a link to download the international kernel compiled? I think this would allow more people to get this kernel. Thank
Click to expand...
Click to collapse
Compiled from Kitkat source. [ur#l]erhan.es/upload/sm-p900-permissive-intl.tar[/url] (odin)
Thank you but the link does not work
smylion said:
Thank you but the link does not work
Click to expand...
Click to collapse
Sorry, it is erhan.es/upload/sm-p900-intl-permissive.tar

Categories

Resources