Pals,
I was having Opal before, which had 2 led, one for signal and it blanking, 2nd for wifi & BT, and it was blanking when turning on wifi or BT.
Now i had Jade, which had 2 leds also, but the 1st led blanking just when receiving sms or missed call, is there a way, to let these leds behave like opal behave!!
Better answer is to buy opal again
Related
i just purchased a touch hd and was wondering why the led indicator lights are not flashing?
i notice that there is an led indicator light on the power button and also next to the earpiece; from my old tytn II, the led indicator flashed amber for service and also blue for bluetooth.
i currently have service and my bluetooth is on, but i don't have any flashing indicators.
is there a setting to turn them on?
This is not a led is a light sensor.
akhoury said:
i just purchased a touch hd and was wondering why the led indicator lights are not flashing?
i notice that there is an led indicator light on the power button and also next to the earpiece; from my old tytn II, the led indicator flashed amber for service and also blue for bluetooth.
i currently have service and my bluetooth is on, but i don't have any flashing indicators.
is there a setting to turn them on?
Click to expand...
Click to collapse
The one next to the earpiece is a light sensor.
The other flashes green for missed event, stays green for finished charging, amber for charging, and flashes amber if you're low on power.
Is there a registry hack to get the "old" LED behaviour? (Cell locked in=Flashing green, Notification = flashing yellow, Bluetooth = flashing blue etc.)
I don't think there is a solution for this (yet).
in anycase, it is only a bi-colour LED - ie Amber and Green - no blue.
I have the same problem: my green led flashes for missed calls but not for incoming messages.....
Can you help me?
Thanx a lot
Dani3l3 said:
I have the same problem: my green led flashes for missed calls but not for incoming messages.....
Can you help me?
Thanx a lot
Click to expand...
Click to collapse
Start, Settings, Personal, Sounds & Notifications, Notifications, Messaging: New text message, Flash light for....
That LED is so tiny and dim I find it's easier to just hit the power button and look at my screen to see if I have missed calls/texts/etc.
well theorticall you woud have to seek out the powr button with eyes first
kdding
Thanks.....
My HD have an Italian ROM and the translation is poor...... nothing about "led blink"
I've resolved checking a flag translated as "turn on screen if incoming message".........
I think i'll try a WWE rom.....
Thanx a lot
dani, that is the correct option. Italian translations suck
An idea i just had:
Its unpractical to accidently accept calls or do stuff on the touchscreen after a SMS while the phone is in the pocket.
But its nice to see who is calling or reading the SMS with out having to turn the screen on before.
So why not use the light sensor, pockets are usually dark. So the software would run in background on an incoming SMS or CALL event it would first check the light sensor, if its dark, dont turn on the screen just start the ringtone sounds. If the environment is bright, just display the caller or SMS right away.
Additional features would be:
- beeing able define the values when to turn on or not
- optional auto screen turn on if it gets brighter (taking the phone out of the pocket), this should only work if there is still someone calling, or a SMS was received in the last 20 (or so) seconds
- program should only read the light sensor on an incoming event to save energy
- optional it could read the light sensor all the time and auto turn on the display everytime it comes out of the pocket, some people might want that
Only problem is, has anyone been able to access the X1 light sensor before? There are programs for the lightsensors of other HTC devices, but the X1 sensors seems diffrent.
A more simple version of this program could simply check the light values every 5 min (or self difineable interval) and set the registry settings for wakeuponcall or wakeuponsms.
Well...I would love to see a software where we can have Blinking white LED signal light on the round scroll panel. Unlike HTC TOUCH where they have blinking green led to show that phone is recieving signals, there is no such thing in Diamond. LED flashes only on unread sms, missed calls , incoming calls and on charging the phone. But there is no blinking light for signals. If somebody would make it , that would be great as i love that white light around the ring scroll.
So if any mastermind in making CAB please bring out something like this.
Regards,
Vishal
The LED has the following:
1. Green when fully charged and while on a charger
2. Amber when charging and not fully charged
3. Flashing when a new SMS, email or missed call.
My question is: how can I set my TD2 to flash to indicate a new SMS, email or missed call at the same time as charging? It would seem that the charging indication takes priority over the flashing.... I want the flashing to take priority.
Does anyone know a solution to this please?
I would like the same.It will be great with no missing call or sms until you unplug your phone...and what about the second light next right to the phone? thanks a lot
fs1978 said:
I would like the same.It will be great with no missing call or sms until you unplug your phone...and what about the second light next right to the phone? thanks a lot
Click to expand...
Click to collapse
There isn't a second light - it is a light sensor.
The light flashes different colors. So it could have be in rhythm with one color and different rhythm of another color.
R=Red, G=Green, Y=Yellow, - = 1 sec
---R---R---R---R---R---R---R (Charging)
-G---G---G---G---G---G---G-- (Missed Call)
Y---Y---Y---Y---Y---Y---Y--- (New Message)
So if it were charging, while having a missed call and new message, it would blink
Yellow, Green, Red, Yellow, Green, Red, etc
If it were just charging and a New Message it would
Yellow, pause, Red, Yellow, Pause, Red, etc
Just a Missed call would be
Pause, Green, Pause, Pause, Green, Pause, etc
So basically if you walked away for a minute and you had a new message and missed call while charging... it would be going crazy. You could even make a dash equal to 2 seconds to slow it down... or 3.
Well Player911, you do have a vivid imagination! Simply just flashing any colour would do nicely for me when charging and something has arrived from SMS, email or missed call.
Can you fix it?
I would prefer a green blinking light simply as a 'breathing' light. Maybe it could blink amber/red when it is low on battery.
It should burn full time only when there's a new event.
Anyway, preference may vary, but I think we all agree that it would be awesome if we could customise it!
mitsi said:
Well Player911, you do have a vivid imagination! Simply just flashing any colour would do nicely for me when charging and something has arrived from SMS, email or missed call.
Can you fix it?
Click to expand...
Click to collapse
I have the ideas, but not the know-how.
I am close to a solution and am currently testing this: http://forum.xda-developers.com/showthread.php?p=1954259.
It seems to work, but the drawback is that you lose the LED notification for charging/charged completely to get the LED's to flash on an SMS/Email/missed call....
EDIT: This doesn't seem to work. It will work for a while, but if you charge then remove and then charge again, the charging LED comes back on. This then overrides the notifications LED which is what I want to take priority Back to the drawing board.
Hi,
can anybody provide a hint on how to change flashing time of the green led indicator? It blinks on missing calls but I'd like to increase the blinking period. I have HTC TD2 with Manilla 2.5 and Touch Sense.
my TD2 comes tomorrow, i think i miss my kaiser's led indicators when using TD2. kaiser is the best and enjoying with its leds, mostly when gps wifi and bluetooth opened at the same time
ccaparli said:
my TD2 comes tomorrow, i think i miss my kaiser's led indicators when using TD2. kaiser is the best and enjoying with its leds, mostly when gps wifi and bluetooth opened at the same time
Click to expand...
Click to collapse
My old P3300 (Artemis) was like that too - quite a light show with gps, wifi, and bluetooth all on. Doesn't last long, 'cos the battery goes flat!
I really miss the flashing green "in service" LED. It was so handy to know a) you had reception and b) the phone hadn't crashed or the battery expired. The TD2 just sits there "lifeless" giving you no feedback at all.
Hi everyone,
I was wondering if there was any way one could get the status LED to blink constantly when connected to a carrier. My old Asus P535 used to have that feature...made it really easy to find it in the dark.
Thanks guys!
I want that too, plus notification when Bluetooth is on (my Touch Cruise used to have the LED blinking in blue when BT is active but such is not found in HD2).
Now, my status LED only blinks when there is missed call or unread SMS/reminder after applying the LED notification tweak.
Bump Helps to find phone in dark.