Database Users

Can't see new Belkin N+ router

Ok, so I bought a new wireless router and my hero refuses to pick it up, Belkin N+. It saw my previous linksys wrt54g just fine. All of my computers and my iphone 3g see the new belkin fine also. I am running modaco 2.0, have tried all the other roms also with the same outcome. Anything I can do here? Return the router? smash my hero? jk

bmr34 said:
Ok, so I bought a new wireless router and my hero refuses to pick it up, Belkin N+. It saw my previous linksys wrt54g just fine. All of my computers and my iphone 3g see the new belkin fine also. I am running modaco 2.0, have tried all the other roms also with the same outcome. Anything I can do here? Return the router? smash my hero? jk
Click to expand...
Click to collapse
2 Things:
1. make sure you are broadcasting a B/G singal not just N.
2. Delete all of your existing "saved" wifi networks off the phone, anything you have previously connected to. then reboot. Seems like Redneck had an issue like this.

The router is set to allow b,g,n. I dont have any networks saved, I've flashed several different roms. As I said my iphone picks it up, so I'm gonna say it has to be a problem with the hero being the only thing in my house that won't see it.

Try changing the channel the router is broadcasting at. Maybe its too high for the Hero

channel 1, 20/40Mhz

well I switched the router to only broadcast in b/g and now the hero picks it up. The whole purpose for the new router was "n". so what gives? All my other "g" devices including computers and again my iphone work on "g" even when "n" is enabled. y not the hero?
I also haven't been able to get anything to install from the market since yesterday (the reason for trying to get on wifi anyway) Been flashing roms to try to get my standard apps to install and/or connect to wifi. Nothing. this thing is really asking for a flight into the woods.

Ok I gave up. turning off "n" on the belkin was the only thing that made the hero detect it. All other "g" devices work with "n" enabled. Ended up just setting up the old linksys as an access point for just the hero to use, what a waste.

do you have any N devices? if not then having it on won't help the speed of your network, only cause problems.

bmr34, i have the same router, and my hero doesnt see the wifi connection when the router is in B/G/N mode either. really irritating seeing as my notebook actually has N...
disabling N was the only solution for me, as i have no other router...

I know it's not much, but i have an airport express broadcasting BGN and my hero can see it..so maybe its your router?

What security protocol is being used on your router?
I have found that I cannot connect to a WPA-Personal and AES wifi. However, the newer WPA2 and AES is just fine. Also, TKIP works just fine.

i'm thinking that it might be the security settings, running mixed n,g mode fine here on belkin N+, ill check my settings and report back

Please do, as am having the same problem, Hero sees n+ in b+g mode only, not b+g+n.

doubljdog said:
i'm thinking that it might be the security settings, running mixed n,g mode fine here on belkin N+, ill check my settings and report back
Click to expand...
Click to collapse
Sorry to dig up an OLD thread, but just in case someone runs across this in a google search, as I did, then here's what you need to do:
Under wireless > security (in your belkin n+ setup page), set your authentication type to WPA2/PSK ONLY (not WPA/PSK + WPA2/PSK). For whatever reason, that's the issue that's freaking the Hero out.
If, for whatever reason, you still need to have the dual option for WPA/WPA2, I was going to use the guest access portion to dedicate to the Hero (as I really don't need to try to connect to the home network via mobile).

[Q] adhoc and vpn does not work after dexter 1.4

I just got my A7 a few days ago. I did the elocity firmware, the latest dexter mod and the adhoc fix.
1. I cannot get the vpn to work. I am trying to get it to connect to my Cisco ASA at work and no matter if I try ip or dns name, it fails immediately. The connection never leaves the A7.
2. I rooted my Motorola Droid and put Barnacle on it. My laptop can wifi tether to the adhoc network off the phone with no problems. My A7 can see the adhoc, tries to obtain ip address over and over and just doesn't connect. It doesn't matter if I use proper wep or non matching wep key, same results. This is frustrating.
I have re wiped, re firmwared, re dextered several times. Out of ideas. Going on vacation i a few weeks and need to be able to tether.
Help!!!!

hi I had to do this to my samsung intercept running barnacle to make it connect. mabey it will help you.
http://androidforums.com/samsung-intercept-sprint/194068-barnacle-wont-run.html
I use the legacy version of barnacle. I think its available on authors site if not on market
scroll down page a little to see instructions for the fix in the link

Try installing googles wifi tether and run it without wep or wpa and see if you can connect that way.If you can connect then enable the Access control and set a ringtone to let you know when there is a connection,that way you can set it up to where you are the only one that can use it and know if there are any other connections besides you. Go to the link below to get the latest download and be sure to read up on it.This is what I use all the time with 0 problems.If you have any problems with it pm me and I will try to help you with it as much as I can.
http://code.google.com/p/android-wifi-tether/downloads/list

Update
I did as suggested with both Barnacle and Google Wifi Tethering with wep turned off. And it works. Why is that? If I create a wep key in either Barnacle as ascii or hex, it doesn't work whether I use ascii or hex equivalent on the eLocity. With the Wifi Tethering app, it only has ascii option and still no luck. Until a new Dexter comes out that may fix this problem (at least for me), I will probably just use Barnacle with max 3 connections and by default new clients gets no nat. I will manually allow nat from the phone to control access.
What sucks is I cannot use my buddy's jail broken iphone for wifi tethering either. My velocity has the same problem passing passwords to ad-hoc networks.

As far as Ive read and been told Android will not connect with wep but what you said you were going to do will work just fine,that's basically what I do,but when Im going to be in one place for a while I will use Google's wired usb connection (link below) to connect to my laptop and then just share its internet connection with other laptops,phones, game systems etc.Either way I think its a good idea to have both the wireless and wired installed just in case and there free so what the hell.
I hope some of this will help you out. Good luck and have a good vacation.
http://code.google.com/p/android-wired-tether/

Really Frustrating Wi-Fi Issue

Just picked up my TF today, updated to 3.1
I have a main router at my house and two bridged repeaters (dd-wrt) sending the signal everywhere so I have coverage. Here is the strange issue:
I can connect via wifi just fine to my main router, but I can't to either repeater. The TF says I am connected, but the wifi symbols stays gray, and doesn't connect to the internet. Other devices connect fine to the routers, even my droid 2 global has no issues.
Anyone else experiencing anything like this? Strangest wifi bug I've ever experienced, i'm stumped.
I've tried the following:
Channel Changes
Open security
Router Reboots
Any advice would be appreciated!!!

just tried connecting to my dd-wrt for the first time reading your post, and it worked fine... I am running prime 1.4 if that happens to have anything to do with it.

Have you tried static IP on your TF?

dan-htc-touch said:
just tried connecting to my dd-wrt for the first time reading your post, and it worked fine... I am running prime 1.4 if that happens to have anything to do with it.
Click to expand...
Click to collapse
A repeater? Or direct router?
I have tried static ip, no avail.

I also have an annoying wifi issue as well. When my transformer comes out of sleep it seems to be connected to the wifi but I can't surf the net. I need to turn-off wifi and turn it back on to make it properly work.
Using Prime ROM v1.4 and the wifi uses WPA.

I should have also mentioned, that despite being "connected" I still cannot visit the router gui via the TF's browser...

alansgabriel said:
I also have an annoying wifi issue as well. When my transformer comes out of sleep it seems to be connected to the wifi but I can't surf the net. I need to turn-off wifi and turn it back on to make it properly work.
Using Prime ROM v1.4 and the wifi uses WPA.
Click to expand...
Click to collapse
+1... I am annoyed with this as well...

mine is a bridge, with it's own ssid

still can't figure it out
I'm considering flashing to prime 1.4 to see if that will help. does anyone know if there are different wifi drivers on prime 1.4 vs stock 3.1?
thx

Have you tried flashing the latest firmware to you repeaters?

alansgabriel said:
I also have an annoying wifi issue as well. When my transformer comes out of sleep it seems to be connected to the wifi but I can't surf the net. I need to turn-off wifi and turn it back on to make it properly work.
Using Prime ROM v1.4 and the wifi uses WPA.
Click to expand...
Click to collapse
Same issue was happening to me on stock rom. I changed WiFi disconnect policy from "Never when plugged in" to "Never". The issue is now gone but battery goes a little quicker now...

Do you know if you have an access list setup on your router? Your access list maybe bllocking your tf from connecting

The first thing I would do in your case, OP, is to disable all security, mac filtering, passwords, etc and see if the Asus will connect or not.
I'm using Prime 1.4 and have no problems connecting to my wifi network using WPA2.
I have...
(1) - Verizon Fios - Main router - no wireless broadcast - DHCP on
(2) - Linksys E2000 - DD-WRT - wired ethernet to main router - broadcasting SSID - DHCP off
(3) - Linksys E2000 - DD-WRT - wired ethernet to main router - broadcasting SSID - DHCP off
Unfortunately, I'm not doing the wireless bridge repeater mode but I haven't noticed anything particularly different about the Asus's wifi.
My wifi is always on, I don't use any of the battery saving modes.

figured it out
After trying a bunch of various resets and google searches, it turns out that the only way for me to connect to a bridged router is by using static ip's and making sure the dns was set to find my main AP.
Its strange that i would have to go through so much manual setup, when all other devices work just fine.

Reverse Tether

My University does not allow Wi-Fi in the dorms because they say it "puts a strain on the network". This includes Mifi's and mobile hotspots.
I have OS X Lion and Windows 8 (Dev Preview) through BootCamp and I get internet through ethernet. I need some way to share internet access from my MacBook Pro to my A500. I also have a rooted Samsung Fascinate, but I cannot Tether at all with it because a. I dont have enough data a month to do that, nor do I have the money and b. the root apps give errors no matter what rom I run.

Buy a wireless router and passcode it.
Sent from my PG86100 using XDA App

Were are not even allowed to have that.

NH2G said:
Were are not even allowed to have that.
Click to expand...
Click to collapse
If your major has anything to do with IT look into another school.
At least if they are not providing their own wireless network and that is the only reason they don't want you to have one.. otherwise the reason you provided is fud if you had a personal nated + wpa 2 protected + hidden network..
Otherwise:
The A500 cannot reverse tether without root. With root you can sorta do it via a root shell and linux commands.. You end up with a connection but many apps think there is none, fine for me surfing the web on the bus but you can't use market and apps wont auto sync.
Some custom firmwares based off the Asus and other android tablets with the same chip set do have true working Bluetooth tether. Thus may fill your needs better.
(Actually I see partial support for Bluetooth tether built into the 3.2 update, but forcing it enabled made the tablet crash, and still needed root to force the option to exist)

NH2G said:
Were are not even allowed to have that.
Click to expand...
Click to collapse
Hide it under your bed lol

kjy2010 said:
Hide it under your bed lol
Click to expand...
Click to collapse
Nah, may also need to disable your essid and clone your desktops Mac address.. otherwise it may disable the Ethernet Jack.
All wireless routers ive seen can do this out of box.. even if I like updating them with openwrt firmware.

can your Mac provide an adhock network?
When my friends router shat itself all he had was a adsl modem with eather net out. He set up his I Mac's wifi so that his iPhone could connect to it (over wifi) in the house. He had lously cell connection where he lived.
Can you do some thing like that and get your tab to connect to your comp? Or am I not understanding the problem?
Good luck.

OP,
Well you are kind of screwed - soft of.
It is the schools network. They can dictate what they want on "their" network. And even if you hid it, etc they still can see what it plugged in.
But they can't tell you that you can't have WIFI at all. WIFI runs on 2.4 Ghz for B/G/N and 5.0 Ghz for A/N bands that is unlicensed frequencies. So if you have a some other Internet connection, ie 3rd party like DSL, Road Runner, whatever, they can't tell you that you can't use WIFI. They can only control their network.
The reason I mention this is because I have seen WIFI Nazi's out there trying to be all macho even when it isn't their network. You might be fortunate enough to have WIFI in the area that you can use, say a friends close by that has commercial ISP and wireless. Also possible to use DD-WRT to put a router in client mode to pick up a signal farther out and and a 2nd router to broadcast that signal in your room.

Wireless tether to a wireless router??

So, I'm getting a tablet and Seagates wireless hard drive to use with it. The only thing is I won't be able to tether to my phone if using the hard drive, so I was thinking of getting a mini wireless portable router.
My question is, how can I get my phone to tether to a wireless router (say a DLINK g730ap) so my tablet can access the Internet and the hard drive within the DLINK? Unless I use the Android Tether as a router, where the hard drive connects to the phone and the tablet connects to the same phone. But I don't know what the transfer speeds are going to be, I imagine it would probably be slow, but I'm not sure.
I hope this makes sense, thanks!!!

groovdafied said:
So, I'm getting a tablet and Seagates wireless hard drive to use with it. The only thing is I won't be able to tether to my phone if using the hard drive, so I was thinking of getting a mini wireless portable router.
My question is, how can I get my phone to tether to a wireless router (say a DLINK g730ap) so my tablet can access the Internet and the hard drive within the DLINK? Unless I use the Android Tether as a router, where the hard drive connects to the phone and the tablet connects to the same phone. But I don't know what the transfer speeds are going to be, I imagine it would probably be slow, but I'm not sure.
I hope this makes sense, thanks!!!
Click to expand...
Click to collapse
I think I understand what you want to do, and it's something I did not too long ago. I actually wanted to see if I could use Sprint Hotspot on my EVO, tethering at 4G, as a replacement for my xfinity internet. The problem is, the router I use requires an Ethernet connection as it's internet input, so I wasn't even sure it was possible. But, apparently, it is. I had to change the firmware on my router, though. If you're trying to do something similar, that's likely what you'll have to do. I got my modded firmware from dd-wrt. But there are a LOT of warnings, and just like upgrading the firmware on your phone can lead to a brick if done incorrectly, the same goes for the router.
I actually couldn't get it to work using Wireless Tether for root users; it only worked with the native Sprint Hotspot, so unless you're paying for the service, it might not be possible. And your bandwidth will be very limited, so don't expect very fast transfer speeds.

Router
You have 2 separate hurdles to cross-
1. DD-WRT compatible Router to handle all 3 devices communication
2. "Wireless Tether" does not create an actual router, it creates an Ad-Hoc based connection using basic ICS, and typical network/routing functions are not available. If you don't want to use Sprints Hotspot app, you will need to get specific instructions on DD-WRT's forum on how to properly configure this type of setup and use your router as a gateway. I'm sure the information is probably posted already somewhere over there. Head over there and start digging. They are to routing as XDA is to mobile phones.

im running this setup now with my phone and xbox and whatever else. like has been mentioned you need to put ddrt on your router and configure it as an ap bridge. then you have to link it to the ....wtf..hold on ill link you.
http://www.dd-wrt.com/wiki/index.php/Wireless_Bridge#Instructions

Yeah that's the way to go, I use ddwrt in client mode so it pulls my wireless tether from my phone and sends the signal out through the cat5 or 6 cable to whatever is wired to the router. But repeater/bridge mode would be needed to send wired signal and also repeat the signal through the antenna for broadcasting wifi from the router.
Sent from my PC36100 using xda premium

I can't figure out how to use this. I turn on WiFi tether, Wifi itself turns off on the phone. Now, I have a WNR3500L with the toastman tomato mod, and I can't figure out how to get it to work with this.