Hello.
After trying the android booting, for 5-6'th time (all working), now the phone can't see the SD card. I thought it was only on the phone, but when i insert the card, in adapter and connect to pc, then NOTHING happens. Like if the card wasn't there.. Hmm, any clue? Usually I just formatted. But now, I can't format a SD card which "isn't there."
Please.
any one??? :S
mooooooa said:
Hello.
After trying the android booting, for 5-6'th time (all working), now the phone can't see the SD card. I thought it was only on the phone, but when i insert the card, in adapter and connect to pc, then NOTHING happens. Like if the card wasn't there.. Hmm, any clue? Usually I just formatted. But now, I can't format a SD card which "isn't there."
Please.
Click to expand...
Click to collapse
Sounds like your sd card maybe corrupt, they can die for no apparent reason, its happen to me twice in about 4yrs, tho i always buy from CEX they offer a 1yr warranty & just replace it if its within that time.
There's been a few threads about this;
http://forum.xda-developers.com/showthread.php?t=712281
http://forum.xda-developers.com/showthread.php?t=646731
Which brand?
mooooooa said:
Hello.
After trying the android booting, for 5-6'th time (all working), now the phone can't see the SD card. I thought it was only on the phone, but when i insert the card, in adapter and connect to pc, then NOTHING happens. Like if the card wasn't there.. Hmm, any clue? Usually I just formatted. But now, I can't format a SD card which "isn't there."
Please.
Click to expand...
Click to collapse
What is the brand of the memory card?
hey dude,i got the same problem as yours few days ago..cant do much abt it,i just buy a new one..some says the htc that makes the sd card problem
Hi,
My 8 GB sd card lags when i`m scrolling in the file manager.
In addition, the sd card drains the HD2 battery. I loose 35% in 6 hours in flight mode, but only 4% when not in flight mode without the sd card... ( this also yields for the original sandisk 2 GB sd card that was supplied with the phone).
Anyone experienced the same issue?
Is this hardware or software related, and can i fix this myself?
Error check your microSD card using your computer then switch your phone off, put the card back in it and switch your phone back on. The phone will need to index your music/video files etc so go to the relevant tabs and let it do its stuff. See how that helps.
mooooooa said:
Hello.
After trying the android booting, for 5-6'th time (all working), now the phone can't see the SD card. I thought it was only on the phone, but when i insert the card, in adapter and connect to pc, then NOTHING happens. Like if the card wasn't there.. Hmm, any clue? Usually I just formatted. But now, I can't format a SD card which "isn't there."
Please.
Click to expand...
Click to collapse
i got a new HD2 and it came with a MicroSD card. I put a couple of cooked ROMs on it and everything was fine for about a week and then the card jsut stopped working. I didnot use it on any other phone or on my PC and it just died.
I own an HTC Hero as well and i put the card in it but it wouldnt recognize it. It has never happened to me before. Never has a card died on me.
I think its a problem with the way the HD2 accesses the SDcard. I wouldnt know specifics but this is the first phone that fried my SD card.
Hey guys, I had the same issue. The SD card stopped working and cannot be formatted now via computer.
My experience with Windows Mobile is that the SD/CF driver is the weakest link. The problem seems to be simultaneous accesses drive it bonkers. I've had the disappearing card problem on other PDAs but usually removing it, doing a reboot with it out, and then inserting it after the reboot is complete will fix it. If it doesn't show up immediately DON'T do anything for a while, it could be doing a CHKDSK on the card, and if you mess with it it will screw it up worse.
Once it shows up what I would recommend is hooking up via USB in CF Disk mode (not Activesync) and doing a format on the drive from Windows.
Last night I got a new 32gb Class 4 MicroSD from China (unnamed) and stuck it in, worked fine, so I backed up all my data to my 'puter off the T-Mobile Class 2 16gb and changed to the new 32gb SD. I started the copy and after a while went to bed.
This morning I got up and it had died during the copy. It was giving me an error on the new MicroSD. It had copied about 75% but was asking to continue or skip. I ended up having to cancel it because it appeared full but it was not. After a reboot I found a ton of FILEXXX.CHK files which indicated it was doing a chkdsk.
Looking at it with SoftWinter.com's Storage Tools the disk was formatted with 512 byte cluster size, way too small for such a large disk, so it was not really out of space just out of cluster nodes. If you have lots of files (I had 10,000) each takes up at least one, even if the file is only 5 bytes. So I reformatted it from the 'puter to 32k cluster size and started the copy over. Seems to be working better now.
Please note that using larger cluster size also will help performance when writing and reading large files as it has to do less directory accesses. Small cluster size is good if you have a lot of small files as it doesn't waste as much space. You lose on average 1/2 the cluster size for each file, as the last node is almost never full.
mknewman said:
My experience with Windows Mobile is that the SD/CF driver is the weakest link. The problem seems to be simultaneous accesses drive it bonkers. I've had the disappearing card problem on other PDAs but usually removing it, doing a reboot with it out, and then inserting it after the reboot is complete will fix it. If it doesn't show up immediately DON'T do anything for a while, it could be doing a CHKDSK on the card, and if you mess with it it will screw it up worse.
Once it shows up what I would recommend is hooking up via USB in CF Disk mode (not Activesync) and doing a format on the drive from Windows.
Last night I got a new 32gb Class 4 MicroSD from China (unnamed) and stuck it in, worked fine, so I backed up all my data to my 'puter off the T-Mobile Class 2 16gb and changed to the new 32gb SD. I started the copy and after a while went to bed.
This morning I got up and it had died during the copy. It was giving me an error on the new MicroSD. It had copied about 75% but was asking to continue or skip. I ended up having to cancel it because it appeared full but it was not. After a reboot I found a ton of FILEXXX.CHK files which indicated it was doing a chkdsk.
Looking at it with SoftWinter.com's Storage Tools the disk was formatted with 512 byte cluster size, way too small for such a large disk, so it was not really out of space just out of cluster nodes. If you have lots of files (I had 10,000) each takes up at least one, even if the file is only 5 bytes. So I reformatted it from the 'puter to 32k cluster size and started the copy over. Seems to be working better now.
Please note that using larger cluster size also will help performance when writing and reading large files as it has to do less directory accesses. Small cluster size is good if you have a lot of small files as it doesn't waste as much space. You lose on average 1/2 the cluster size for each file, as the last node is almost never full.
Click to expand...
Click to collapse
Hey
i hope for your sake im wrong, but as far as ive been able to find out in my own searching, only san disk has released a 32gb micro sd & its only class 2.
there has been a lot of talk of fake 32gb micro sd's from china, most are actually 4gb re-programed to read as 32gb on your phone or pc, but when you start to fill them with files more than their actual capacity they will only overwrite prev' files & become corrupt.
i actually pick up 1 (32gb) last weekend from a local store, tried to copy the contents of my 16gb, 7gb copied then an error occurred, 2nd attempt 9gb copied but files unreadable by phone or pc, fortunately i always buy from this store & they refunded (£50), straight away, still have 2 16gb cards ive had for about 9mnths with no probs.
there is another longer thread over in the Q&A section, you guys may find some useful feed back over there: http://forum.xda-developers.com/showthread.php?t=646731
Well, the one I got says SanDisk and I have done a full format and surface analysis, it checks out, but I am having trouble writing to it. Not sure what is up with it right now. I knew it was a fake but I thought it was a real fake, not a piece of junk. I hope you are wrong.
I´ve got problems too. I have two SanDisk 16 GB microSDHC cards and both of them are giving similar problems.
I´ve got my HD2 a few days ago and initially I used my old 16 GB card I bought with the X1 (then used with my TP2 and latest the HD2). Everything was working fine initially but then the problems arose. Now I have those problems:
1. Audio Manager has problems reading my music library. iPlay can read it though. Windows Media Player takes a long time building my music library but manages to do that eventually.
2. HTC Album can read my albums sometimes - sometimes not.
3. Resco Photo Manager can read the albums but sometimes it takes a long time to do it.
4. The computer can access the card without any problems after formatting and it seems not to be any problems reading or writing files to it. Installations of cabs stored on the memory card works.
5. Total Commander can access the card without any problems but takes slightly longer time than before to show all folders.
6. Running chkdsk in Windows gives the result of a perfectly working card.
7. The phone is draining battery in an abnormal way with the card inserted.
8. Flashing ROMs from the card worked initially but not any longer. Now it shows the threecolor bootloader screen instead.
The interesting thing is the fact both of my 16 GB cards has the exactly the same symptoms. I will try them in my X1, TP2 and Vivaz later to check out their behaviour.
When I inserts my old 8 GB card (everything made by SanDisk) everything works without any problems. Flashing ROMs work normally etc.
I´m running the Omega XT 3.0 and are using HardSPL3. The 16 GB card has worked perfectly initially with this ROM and HSPL so I don´t think they are related.
The whole thing seems to indicate some kind of "incompatibility" between the phone and the 16 GB cards. It´s like it is unable to handle that size of card correctly. It seems like it "trashes" the file system. My older 16 GB card started to behave badly which caused me to buy a replacement and now that replacement has the exactly the same behaviour.
My 8 GB card is an "ultra" SanDisk card. The troublesome cards are Class 2 cards. I began to have the impression the problem is some kind of issue with Class 2 - because the cards itself seems to be working after formatting.
I have formatted them with either Panasonic SDFormatter and the Format SD application on the phone. Both options gives the same result.
Related
Help! Storage Card suddenly not showing - dead?
Has anyone had problems with the Storage Card completely dying? I cannot read my 1GB miniSD card on my Wizard device at all any more. It started being weird yesterday but after a reset I was able to access the data, but today it is totally gone.
A 16MB one works fine. :? These cards don't generally die that easily do they?
Could this be a driver issue or something else so I can get my data back? I have tried many resets both with and without the card in place.
I've the same problem (I guess) with my card. I'm not able to read my card on the vario. When i inserted my SD card in a PC he cant read the card. When i start my PC with the card insered system hangs on loading windows.
When I restart my phone with the SD card inserted WIFI wont go on, do you have th same problem CJSnet ?
This looks like the SD disk is something like an (unreadable?) bootdisk ?
I had the same problem with a SanDisk 1GB card recently. I sent it back to the supplier and they replaced it.
Before my "Mini S" I had a "2i" and it was well known that it would "eat" cards. On that forum they compiled a list of "never eaten" cards and recommended staying away from anything not on the list.
I suspect the Wizard may have a similar problem.
i've also got a problem with my miniSD, sometimes it doesn't recognise the card. But when i remove it and re-insert a few times it does work again.
A common problem with the SD-cards is that their contacts are dirty, cleaning sometimes helps.
Thanks mmm_ok, can you provide a link to that list of 'never eaten' :lol: cards please?
Mine is an unbranded type from Viking, so that could be the reason.
zawoot, I had no problems with WiFi and the card inserted.
Have now solved it. When I loaded the card on a PC and ran chkdsk, some of the files were corrupt (plus the boot partition I expect). I copied the salvagable files to the PC, formatted the miniSD which took about an hour (!), and now the PPC can read it again. Now I just copy back the files from the PC, and the lost ones from a recent backup.
What a pain in the backside. HTC not fixing the 'eating cards' bug has cost me 3 hours of my life. What price technology!
SD card problem
I'm facing the same problem. The last thing I tried was format the SD Card
using Pocket Mechanic "Logical Format" - "do not use quick format", format it
two times and just that. Also, as a test, I'm not using the full SD Card
capacity, my SD has 1 G and at this time I'm using 700M and since 10 days ago
everythiong is fine. As an additional test I leaved the battery goes to a
very low level and reseted the device to see it it corrupt the data .. but
is still ok.
My 2GB Adata myflash card has done this. I'm so mad, it has to go all the way back to china for repair.
This is really wierd behaviour for a phone. HTC in all its shoddy glory.
CJSnet said:
Have now solved it. When I loaded the card on a PC and ran chkdsk, some of the files were corrupt (plus the boot partition I expect). I copied the salvagable files to the PC, formatted the miniSD which took about an hour (!), and now the PPC can read it again. Now I just copy back the files from the PC, and the lost ones from a recent backup.
Click to expand...
Click to collapse
SO is there any other issues after you did the format?
I have an ATP 1Gb MiniSD and sometimes my MDA just said that it can't execute an application (that's installed to the miniSD card) because it was "usigned". When I run Resco Explorer, I noticed that the card is NO LONGER shown (???). So I took out the card, re-inserted it and it's now shown in Resco Explorer as "Storage Card2" ! So of course none of the program works since the links (in registry especially), pointed to "Storage Card", not the one that ends with 2. So my solution (for now) is to just shutdown the device, wait for a few minutes, then turn it on again.
I have had 2 cards from mobymemory 1gb and now 2gb - not one problem run well. Can highly recommend mobymemory the use single density cards or something that many of the other manufactures don't use. my advice stay away from cheap cards.
I used a backup utility my card died, and windows could not open it, I reformatted on my digital cam and it works again. It's the software loaded on it.
My MiniSD card popped out of its slot spontaneously last night. Ever since my Qtek 9100 would not recognise it any longer. It still worked on my card-reader attached to my PC. In the end I decided to format the card (not quick format) and now my Wizard recognises the storage card again. Losing all my downloaded attachments during the process. FYI It is a SanDisk 1GB MiniSD card.
sandisk 1g card is almost 2-yrs old and was first for typhoon and now serves faraday and wizard and just started acting wierd on wizard. every so often device does not read card upon waking. pulling it out and reinserting fixes it but i've moved programs to device. poo!!!
Storage Card seemed dead
I had a simuliar problem with my original qtek 1.6 rom until I upgraded to the latest imate 2.17.
Having worked 5-10 minutes with wi-fi, the storage card became invisible and unaccessible. To make it visible once again it was necessary to soft reset the device.
This and some other problems disappeared once I upgraded to 2.17.
Hope this help
The data from my SD card became partly unreadable, some prgms could not be started and when looking at the root folder of my card I found some items named like ç!é”è((é§éç. Putting the card out and back in didn’t help, only a soft reset did the job. All data was still intact. This thing happened twice untill now. I use a Sandisk 1GB card.
Has anyone had this problem before? I remember reading about the same problem on a forum but couldn't find the posting.
I also experienced the same problem
I had this problem before. When I pulled my Sandisk 1 GB Micro SD and pushed it back in, the System did not recognize my Memory Card. I did it several times and suddenly it came back again.
The trick I used was pushing the Memory upward (against the back of the phone) until the memory was not completely inserted. Roughly about 1/10 of the memory sticks out of the memory slot
I believe this is a major hardware problem with the Memory Slot.
I have had this problem with my 2GB miniSD on my MDA Compact- the first time i had no choice but to re-format the card and start over but second time, re-inserting the card solved the problem.
May be something to do with the card not getting proper contact.
It doesn't work at all anymore!
I've had the same problem with my 1gb SD card since I bought it 2 years ago. It's crap, because copying a movie for instance through the phone (MDA compact) takes forever.
Now I reformatted it, and copied some stuff to it through my card reader. But after putting it back into my phone, the card now is not even seen at all by my phone, and putting it back in my PC doesn't work either... now it's not recognised anywhere anymore...
Anyone, now how to get this fixed?!
Thx!
Re: It doesn't work at all anymore!
The Fittest said:
I've had the same problem with my 1gb SD card since I bought it 2 years ago. It's crap, because copying a movie for instance through the phone (MDA compact) takes forever.
Now I reformatted it, and copied some stuff to it through my card reader. But after putting it back into my phone, the card now is not even seen at all by my phone, and putting it back in my PC doesn't work either... now it's not recognised anywhere anymore...
Anyone, now how to get this fixed?!
Thx!
Click to expand...
Click to collapse
Try using this utility (or similar) to format your card from a card reader:
http://www.sdcard.org/Downloads.aspx I've used it many times on various cards and seems to do the trick.
Re: It doesn't work at all anymore!
sh500 said:
Try using this utility (or similar) to format your card from a card reader:
http://www.sdcard.org/Downloads.aspx I've used it many times on various cards and seems to do the trick.
Click to expand...
Click to collapse
Hmmm, thx for hint, but that didn't work either. Since the drive isn't recognised, so does this tool... weird enough the adminstrative tools in windows (drive managament) does see a 1gb drive, but assigning a new drive letter causes an error.... damn... looks like I'll be buying a new SD card.
Does anyone know which brands/types (I now have a 1gb Kinston) have less problems with this, so I can copy files to and from my card though my card reader instead of my phone, without srewing my card up?
Edit: Ha! I formatted my SD card with my digital camera! Leaving just the problem of not being able to copy files to my card through my cardreader...
My MicroSD was working nicely since new (1 month ago) And it just stopped. Just now. Just like that
Reinserting does not work. Reset does not work. And if I put it in USB mode, the XP disk manager and file explorer jam. And I was not even writing to the card or anything. Putting it in a USB card reader makes XP respond the same. Putting another (128Mb) card in the phone works well, no reset needed.
It looks like the SD card itself is corrupted. Not the FAT or partition table, but the card itself, because otherwise disk manager could repartition it.
If I reconstruct events: I was checking some OpenGL based programs. I ran GL maps. Then I ran BeerV2. (all from the card). BeerV2 was reeealy slow, and I noticed GLMaps was still resident, so I killed it. Then I noticed Diamond Hologram did not want to start, so I figured OpenGL in a bad state and I reset. And then my SD card was gone.
So, when I ran BeerV2, the card must still have been there. When I ran Hologram, it was probably already gone. All application were installed and ran OK in the past.
I destroyed my SD card by killing a running process that probably was not even writing at the time????
Very strange. Can't even believe it myself, must have been coincidence...
So, I am down to 128Mb for the moment..... Better read that thread about the 16Gb cards again.
cybermaus said:
My MicroSD was working nicely since new (1 month ago) And it just stopped. Just now. Just like that
Reinserting does not work. Reset does not work. And if I put it in USB mode, the XP disk manager and file explorer jam. And I was not even writing to the card or anything. Putting it in a USB card reader makes XP respond the same. Putting another (128Mb) card in the phone works well, no reset needed.
It looks like the SD card itself is corrupted. Not the FAT or partition table, but the card itself, because otherwise disk manager could repartition it.
If I reconstruct events: I was checking some OpenGL based programs. I ran GL maps. Then I ran BeerV2. (all from the card). BeerV2 was reeealy slow, and I noticed GLMaps was still resident, so I killed it. Then I noticed Diamond Hologram did not want to start, so I figured OpenGL in a bad state and I reset. And then my SD card was gone.
So, when I ran BeerV2, the card must still have been there. When I ran Hologram, it was probably already gone. All application were installed and ran OK in the past.
I destroyed my SD card by killing a running process that probably was not even writing at the time????
Very strange. Can't even believe it myself, must have been coincidence...
So, I am down to 128Mb for the moment..... Better read that thread about the 16Gb cards again.
Click to expand...
Click to collapse
Have you tried formatting the Card? It sometimes works!
This might have been a flakey card or just bad luck. Do not use Windows format for any SD cards, it's not formatting them according to SD/SDHC specs.
http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
Try this one.
Only microSDHC available at the moment is the SanDisk 16GB class 2 for ~€50.
-Valynor
Valynor said:
This might have been a flakey card or just bad luck. Do not use Windows format for any SD cards, it's not formatting them according to SD/SDHC specs.
http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
Try this one.
Only microSDHC available at the moment is the SanDisk 16GB class 2 for ~€50.
-Valynor
Click to expand...
Click to collapse
16gb micro sd £39.15 at vodafone
cybermaus said:
My MicroSD was working nicely since new (1 month ago) And it just stopped. Just now. Just like that
Reinserting does not work. Reset does not work. And if I put it in USB mode, the XP disk manager and file explorer jam. And I was not even writing to the card or anything. Putting it in a USB card reader makes XP respond the same. Putting another (128Mb) card in the phone works well, no reset needed.
It looks like the SD card itself is corrupted. Not the FAT or partition table, but the card itself, because otherwise disk manager could repartition it.
If I reconstruct events: I was checking some OpenGL based programs. I ran GL maps. Then I ran BeerV2. (all from the card). BeerV2 was reeealy slow, and I noticed GLMaps was still resident, so I killed it. Then I noticed Diamond Hologram did not want to start, so I figured OpenGL in a bad state and I reset. And then my SD card was gone.
So, when I ran BeerV2, the card must still have been there. When I ran Hologram, it was probably already gone. All application were installed and ran OK in the past.
I destroyed my SD card by killing a running process that probably was not even writing at the time????
Very strange. Can't even believe it myself, must have been coincidence...
So, I am down to 128Mb for the moment..... Better read that thread about the 16Gb cards again.
Click to expand...
Click to collapse
Check out the thread of mine on this. I had similar problem on 16 gig card. I used the Softwinter.com storagetool app to restore. Now seems OK.
But, tomorrow will load up a few more gigabytes on the card. Have restored all applications including 2 gig of route66 and all is well.
...
here is the thread link: http://forum.xda-developers.com/showpost.php?p=3159350&postcount=54
Before you start formatting, try the Windows Error Checking tool.
I had problems with the SD aswell, and this fixed it up.
Guys, all those tips on reformatting are kind, the card itself is broken. Not just lost its formatting, but lost its ability to present itself as a card.
Anyway, already ordered a replacement. 8Gb-ultra only, the 16Gb-ultra were out of stock. I want it fixed today, because I need (well, want) TomTom tomorrow on my trip to Paris.
But at least I can see if the ultra series is really noticeably faster than the normal SANdisk.
cybermaus said:
Guys, all those tips on reformatting are kind, the card itself is broken. Not just lost its formatting, but lost its ability to present itself as a card.
Anyway, already ordered a replacement. 8Gb-ultra only, the 16Gb-ultra were out of stock. I want it fixed today, because I need (well, want) TomTom tomorrow on my trip to Paris.
But at least I can see if the ultra series is really noticeably faster than the normal SANdisk.
Click to expand...
Click to collapse
I would suggest to try the storage tools app (it's free). I had a similar problem with my micro SD stopping presentation to the laptop and USB sync mode. It would work in the HD but strangely - very long delays in pocket pc explorer.
Before I went out and bought a new card I tried the storagetools app and it worked for me !
Anyone else getting this with their S4? I bought my S4 two weeks ago and a Sandisk 64gb card to go with it and started seeing this error about twice a day. I returned it for a Samsung SD and didn't see the error for almost a week until today.
The card actually appears to be fine, all I have to do is remount it after seeing the message and all is good, it's just worrisome cause I store all my photos on there. I'm wondering if it could be the phone itself? I have one day left to exchange it, but it's rooted.
SD Errors are because the card is physically moving when its being written to. This cause bad sectors on the card. Try putting a piece of thin scotch tape and cut to shape of the face of the SD Card. See if it fits more snug....
Are you jogging with the S4 or something? Samsung SD's are class 10 which I think write faster. Maybe that is less likely to cause damage because its written so fast? Not sure....
Try the tape trick and see if it reduces the problem. Else its a physical problem with the slot.
i also have a class 10 64gb, some guy on the forum posted this problem too, he said that by formating the card with a PC and then formating it with the format utility in the phone settings has solved his problem. If not, might be a slot problem like slider mentionned
I had this problem too with my 32 gig class 10. When I put my shock absorbant case on it my problem went away
Sent from my SAMSUNG-SGH-I337
I had never had an issue with a Sandisk card until my S3 ate a 32GB. I then started readibg how the S3 ate non- Samsung cards. I have been using a Samsung card with no issues
hope you make regular sdcard backups and copy to pc
polish_pat is correct, reformat your card with sdformatter, use Full Erase On and Size Adjustment On
Of course backup first
you shouldn't have to reformat again in phone--
if the card is good this should solve your issue
I had tried 3 different San disk 64GBP class 10 cards and had this problem, the fourth one works so far...doing some searching I found lots of complaints from lots of different device forums about this card. Only fix I found was running chkdsk repair on the card in Windows but this only worked for a few people ( couldn't save my first three cards)
anyway, imo exchange the card or better yet buy a different brand
Sent from my SAMSUNG-SGH-I337 using xda premium
Posting here as doing a search revealed this is the closest to the problem that I'm having. I've had my AT&T Samsung Galaxy S4 for approximately 1 month now. I purchased a Sandisk 32GB SD Card for the phone. Two days ago I began experiencing issues where when unlocking the phone I would notice the card would unmount then remount (this was in the notification bar). Later that night, the card unmounted and there wasn't any way to get it recognized again. I posted in some other forums and someone said there were some good posts here.
I've contacted Sandisk regarding the card and they refused any involvement stating it's a problem with the phone, not the card. They determined this because once I was able to get the phone to recognize the card and plugged the phone into the PC, the card was able to be read. As long as it's readable, it's fine. After dealing with this I eventually found my MicroSD to SD reader and plugged it into my media reader in my printer. I had quite a few issues from time to time reading the card, however I can't 100% for sure say whether this is the card or the printer.
Anywho, I grabbed copies of what I needed. Formatted the card on the PC, then formatted it on the phone. I began to copy my entries however at one point instead of saying I had 29.* GB Available, it said something like 2.0 EV of 3.0 PE or something like that... these weren't the typical numbers I've seen nor the units of storage space. I apologize that I can't recall that information. I reformatted again and it worked. Left the card in the phone empty over night then tried to copy files later today. This worked.
Now, approximately 48 hours after the problems began, I noticed more issues. SD card stated that it had been damaged and that I should reformat it. While this message stayed in notifications, I confirmed I was still able to read files on the SD card. When googling that error hoping I'd find more resources, the card again unmounted.
One of the resources I found had me do a CHKDSK /F /X on the card. I did this and found no issues. I've replaced it back into the phone and it seems to be working for the moment.
1) Are there any confirmations if this is a bad card, or if perhaps any applications are causing the card to do this? I do have QuickPic and have enabled some of the hidden file features if that helps.
2) Do we know if there are any logs that can be pulled to help verify this?
3) Is it a specific card? (I've heard SanDisk 32gb, but also have heard non-Samsung SD will fail)
Looking to get this resolved ASAP. This card was purchased directly from AT&T when the phone was purchased. I am just looking for some confirmation that if I have to buy another card, I'm not going to gamble if that's going to have the problem as well.
Thanks! If I forgot anything please ask!
Edit: Per the thread, this is a Class 4 card. Also the phone was not moving when it was writing data. I've been couch-ridden all day and unlocked it. I don't believe the phone was in deep-sleep mode as I had received a text not long before I began noticing these messages.
same problem
i have the same problem and guess what ?
the phone is acting like the ***** it stays ok for 3 weeks while that time i download to many stuff to my ext card 32g Elixir Memory after that it crach and give me notification that sd card is damaged and i have to reformat it sucks
by the ****in way this's the fifth time it crash i changed the memory to sony and same and changed to Kodak and the same
so abso****inlotley its the S3 for me soon its going to trash
polish_pat said:
i also have a class 10 64gb, some guy on the forum posted this problem too, he said that by formating the card with a PC and then formating it with the format utility in the phone settings has solved his problem. If not, might be a slot problem like slider mentionned
Click to expand...
Click to collapse
This works! It fixed the issue I was having with my SanDisk 64GB.
I've just bought a Moto X Play ( UK ) which comes pre-installed with Lollipop from carphone warehouse, I have Samsung 64 GB SD Card Class 10 which is official SD card, been using it on my old S4 phone & computer without issue However when used on my Moto and reboot the phone I get a message saying the SD Card is damaged, and I can't access anything.
If I put the card into my computer or old S4, the card is fine and can be read no issues. i've been playing around with it and what i've noticed is that I think I can now replicate this problem at will and just wondered if any others are noticing this problem.
To replicate the problem:
1. Move an App from internal to SD Card.
2. Reboot the phone, the phone will say the "SD Card is damaged, try re-formatting it" ( don't do it! )
To resolve the corruption, I just took the SD Card out of my moto put it into either my Samsung S4 or a PC, go to the SD Card and clear down the contents of the "Android" folder sitting in the root of the card.
Put the card back into the Moto on startup, the phone is happy with the SD card!, no corruption and all files ( Music, Video, Images etc ) work without issue on the moto.
Repeat the steps again and bang the card goes corrupt again!, very annoying.
It appears to me that there is a bug in the moto SD card implementation which needs addressing as I can't put apps onto SD card and re-start my phone without this problem arising.
I've tried replicating this fault with another memory card and get the same problem
Can anyone else confirm if they are having the same problem?, if you aren't could you tell me what brand of memory card you are using, and the exact software version you are on?, when I do a software update it says I have the latest version.
My Phone Version is:
Android version: Android 5.1.1
Hardware SKU : XT1562
Build Number: LPD23.118-10
Have the same with a (the one) SanDisk 128GB card...
I had the same problem with a 32gb Samsung Evo SD card, yesterday I searched for a solution on the internet and found some suggestions about to format the card from Windows with "quick format" unchecked.
I gave it a try, it took 10-15 minutes to format it but I had no more problems so far!
Hi
What I did was to buy a new memory card from Curry's, won't buy an SD card off places like amazon/ebay due to the number of fakes knocking around on there.
I got a 64 GB PNY Class 10 memory card ( £17.99 ) , plugged it into the phone ,it was instantly recognised, I decided to Erase card using the Menu option before moving apps and data onto it and everything is working fine so far, have re-booted the phone several times without any problems!
I think probably re-formatting the existing Samsung memory card in the computer would probably do the trick as well. however I've got a new use for that memory card as it's going to be used in the car sat nav instead.
It's a strange issue but i'm glad it's solved.
same problem here, can´t use SD as internal becoz it freezes at 40% of formatting and later says that is damaged.
Have the same problem with 2 or 3 sd
knives69 said:
same problem here, can´t use SD as internal becoz it freezes at 40% of formatting and later says that is damaged.
Have the same problem with 2 or 3 sd
Click to expand...
Click to collapse
I found this good utility for SD Cards, download it on your PC and try scanning your SD Card with this tool, perhaps there is an fault with your sd card, it's called macrorit , I can't post a link as the forum rules won't let me.
There is a free version for download, just go to google and type "macrorit download"
This tool is also good if you need to format a 64GB SDCard as FAT32 instead of exFat, something my car sat nav wants and Windows 10, with diskpart can't do
I am sure there are bugs in both the Android 5 & 6 code but when it comes to SD cards my first suspicion is the card itself. You have to understand that these things barely work and are only marketable because they have internal processing that corrects problems on the fly. Even manufacturers with the best reputations produce flakey batches of SD cards. My experience has been that cards can have invisible latent problems which manifest only when usage changes. eg: a swath is bad but never exposed until a size boundary is crossed, or a storage allocation scheme changes with a new or updated filesystem.
Micro SD cards are vulnerable to physical handling problems including excess g force or static electrical damage.
FWIW, my experience:
1. If even one device reports a problem then the card likely is not 100%. Replace it.
2. Never store valuable and irreplaceable data on it without an active and complete backup process in place.
3. Buying an expensive high capacity device? Get the extended warranty or in store replacement extension. Keep the packaging with all of the batch coding on it. Make sure the replacement is from a different batch.
Also, there are a lot of counterfeits. Buying from a big store says nothing about the true nature of the device.
Hard drives: Very good, predictable service times
SSDs: Almost as predictable.
SD cards: Very unpredictable even if not counterfeit. Easily reprogrammed by anyone with some tech savvy.
---------- Post added at 12:46 AM ---------- Previous post was at 12:33 AM ----------
One more thing, if the SD card is 100% ok then you should be able to completely rewrite the card every day for at least a couple years.
If your card is under warranty and giving an error in even just one situation then back it up and throw a heavy "burn in" program at it. Let it run until it dies and get it replaced. Better in a burn in program than in your phone.
When you get a new card, make sure you run a tester that writes/reads the complete capacity at least a couple of times. Make sure the data is random.
Again, my opinion only.
Never think of SD cards as being reliable like the phone internal storage. They just are not. They could be but then you would be paying a lot more for them.
I bought a brand new 32GB strontium class 10 card and only managed to use it for a day before the phone kept notifying me that the card was removed and I have to restart the phone to be able to use it again. This happened multiple times before I changed the card with my other one, bought 4 years ago, a class 4 16gb sandisk. no problem whatsoever with it. Now I'm getting a replacement for the new card.
My moto x play is not supporting Samsung evo 32 GB memory card how can I fix this problem plzz help
knives69 said:
same problem here, can´t use SD as internal becoz it freezes at 40% of formatting and later says that is damaged.
Have the same problem with 2 or 3 sd
Click to expand...
Click to collapse
I have the same problem here with my Samsung 64gb SD-card. Did you find a solution? Before I tried to format it as an internal device is was using it as an external sd card and didn't met any problems.
I have the same problem Android v 6.0.1, system v. 24.61.52.lux_retail_ds.retla.en.01 retmx
I am facing the same problem.. I need to restart my phone repeatedly to get my sd card accessible and that too that becomes accessible only for a few minutes.. And then agaun the same problem occurs
I have the same issue as Shivi10.
I previously found the same issue on a sandisk (32 GB class 10) and asked for a replacement.
Now I found same issue on a new Sandisk same size and class bought on a local shop.
I'll burn in this card on a PC and see the result. If the card passes the burn in the phone itself could be the cause for me.
acehigh1971 said:
I have the same issue as Shivi10.
I previously found the same issue on a sandisk (32 GB class 10) and asked for a replacement.
Now I found same issue on a new Sandisk same size and class bought on a local shop.
I'll burn in this card on a PC and see the result. If the card passes the burn in the phone itself could be the cause for me.
Click to expand...
Click to collapse
I used the suggested macrorit utility to check sd card integrity.
I erased, formatted the card on a pc. Then I did several cycles of write, read with macrorit, erase. All these cycles went good. The card is clearly ok (this is the second one, the first was returned but I suspect it was good).
I decided to return back the phone. Appraisal for amazon who agreed on a money back. Excellent.
This phone is awesome, but I'm tired to go around finding bugs and losing my pictures. I'll look for something else.
My problem started after I was using my Strontium Nitro card as internal memory and dropped the phone, my moto doesn't accept any card since then
Have you got the solution to your problem? I am also facing the same for last 3 month
[Have you got the solution to your problem? I am also facing the same for last 3 months
=knives69;64621030]same problem here, can´t use SD as internal becoz it freezes at 40% of formatting and later says that is damaged.
Have the same problem with 2 or 3 sd[/QUOTE]
the issue is with the andriod / phone . i had the same issue as i twerk with electronics i had tried checking the sd card on my pc and all the data is present perfectly . I have then used a spare SD card in the phone and then removed it after config and then used the issue SD card . to my surprise it is working . this i have done multiple times . for some reason when we eject the sd card the system feels as corrupted SD card and ask for format . Hope this will save ur data if you dont format before checking the same in PC.
Same sd card issue
Have been using SanDisk SD card 64gb class 10 from the day when i bought moto x play ....using it as portable storage only didn't formatted it as internal storage....now suddenly while using the camera.... Camera was unable to click pictures anymore..... it forcestopped whenever tried to click any pics......due to this i restarted the phone once....after that SD card shows for a while after phone been started n the card disspears....
Tried the same sd card in other phones it works properly.......but not in my phn anymore...other sd cards works properly in my devices but not the current one
Plzz anyone to help me n sort this out..... Thanks in advance
Any solutions for the memory card auto eject/missing issue in Moto X play Marshmellow? Tried replacing 2 Transcend and 1 Sandisk cards..
abuvipin said:
Any solutions for the memory card auto eject/missing issue in Moto X play Marshmellow? Tried replacing 2 Transcend and 1 Sandisk cards..
Click to expand...
Click to collapse
Try Nougat rom?