Database Users

Problem with step2.cmd

I've finally getting around to rooting my x10a, but I'm having a problem with step2.cmd. It echos it's schpeel that select option 6 or whatever, without any error (except for the normal "device not found"). I know that it's supposed to come up with a screen that you should select the 6th option on, but it's not showing up!
If anyone is wondering I do have USB debugging on and I have installed all the drivers.
EDIT: I did include the deviceid txt files inside both of the folders.

Actually, "device not found" is NOT normal. It shouldn't say that if it's working properly.
Steps 2 and 3 (and 5 for X10a) use ADB. There are a few things to check (I'll list everything I can think of, including ones you may have already done):
1. ADB doesn't require DeviceID.txt (it's for X10Flash), so it's not that.
2. Make sure USB Debugging is enabled on the phone (under Settings > Applications > Development).
3. Unplug the USB cable and plug it back in. On the phone, the notification bar should show "USB debugging enabled".
4. Make sure that the SD card is NOT mounted to your PC. The notification should show "USB connected", NOT "Turn off USB". If it does say "Turn off USB", then click it to turn it off.
5. In Windows, double-click on the Safely Remove Hardware icon in the system tray. There should be a device called "adb01 ADB Interface Driver". Don't remove it, just make sure it's there. Hit Cancel/Close.
6. Open Task Manager (Ctrl-Alt-Del) and look for a process called "adb.exe". Click it and hit "End Process". Next time you start adb, it should load up the daemon again.
7. Have you tried rebooting your PC? How about your phone?
8. ADB connects using TCP. If you have a software firewall (e.g. ZoneAlarm, Eset Smart Security, etc.), it may be blocking access. Either make an exception, or just disable the firewall for now (don't forget to turn it back on later). No, a router doesn't count (the phone is connected through USB, not your network).
9. There may be a problem with your Sony USB drivers. Uninstall Update Service and PC Companion (if you have them), reinstall them, and then plug in your phone again so that the drivers are reinstalled. I had to do this to fix a different problem (that second USB Mass Storage device kept connecting and disconnecting).

Did you allow unknown sources?
Sent from my X10a using XDA App

Grospolina said:
5. In Windows, double-click on the Safely Remove Hardware icon in the system tray. There should be a device called "adb01 ADB Interface Driver". Don't remove it, just make sure it's there. Hit Cancel/Close.
Click to expand...
Click to collapse
I've done everything but that, which is not there, what should I do about that?

You know what, the laptop I'm using right now really sucks in the spec department, so it might just be that. Is there anyway to reflash it to rogers x10a?

is your laptop using vista 64? If it is follow this post to fix it. http://forum.xda-developers.com/showthread.php?t=713457

to get through step2, i had to install sony ericsson pc companion, it has the drivers which step2 depends on

carmatic said:
to get through step2, i had to install sony ericsson pc companion, it has the drivers which step2 depends on
Click to expand...
Click to collapse
You are a freaking life-saver, going to try that now.

Mod. edit: not dev related, moved to general

Nexus 4 not showing up in my computer as MTP Storage

Hi Guiz, So you all probably have heard this a million times but i have tried every i can to fix this. I have tried many options such as Deleting and re-installing the drivers, trying a different usb port 2.0 and 3.0 I have restored my phone. And my phone only comes up as PTP Camera which is useless since i cant root my N4. This problem occured after i updated to Android 4.3. So my question is how can i make my N4 show up as MTP Storage?
I'm running on Windows 8. Thanks in advance.

Zypent said:
Hi Guiz, So you all probably have heard this a million times but i have tried every i can to fix this. I have tried many options such as Deleting and re-installing the drivers, trying a different usb port 2.0 and 3.0 I have restored my phone. And my phone only comes up as PTP Camera which is useless since i cant root my N4. This problem occured after i updated to Android 4.3. So my question is how can i make my N4 show up as MTP Storage?
I'm running on Windows 8. Thanks in advance.
Click to expand...
Click to collapse
1 quick Forum search would easily have solved this for you.
But since you're here:
1. Enable USB debugging: Go to phone settings -> About -> Tap build number repeatedly until developer menu is enabled. Go there and tick USB debugging.
2. On your PC, go to your device manager (when the Phone is plugged in and set to MTP), locate the phone, right click on it -> properties
3. go to the Driver tab
4. click Update Driver
5. click Browse my Computer for driver software
6. click Let my pick...
7. select USB Composite Device
8. finish up with the assistant
9. be happy

danielms22 said:
1 quick Forum search would easily have solved this for you.
But since you're here:
1. Enable USB debugging: Go to phone settings -> About -> Tap build number repeatedly until developer menu is enabled. Go there and tick USB debugging.
2. On your PC, go to your device manager (when the Phone is plugged in and set to MTP), locate the phone, right click on it -> properties
3. go to the Driver tab
4. click Update Driver
5. click Browse my Computer for driver software
6. click Let my pick...
7. select USB Composite Device
8. finish up with the assistant
9. be happy
Click to expand...
Click to collapse
I've been trying to solve this myself, i thank you!!! Finally!!

danielms22 said:
1 quick Forum search would easily have solved this for you.
But since you're here:
1. Enable USB debugging: Go to phone settings -> About -> Tap build number repeatedly until developer menu is enabled. Go there and tick USB debugging.
2. On your PC, go to your device manager (when the Phone is plugged in and set to MTP), locate the phone, right click on it -> properties
3. go to the Driver tab
4. click Update Driver
5. click Browse my Computer for driver software
6. click Let my pick...
7. select USB Composite Device
8. finish up with the assistant
9. be happy
Click to expand...
Click to collapse
Thats the problem it doesnt show up.

Zypent said:
Thats the problem it doesnt show up.
Click to expand...
Click to collapse
I also have this problem, my nexus 4 won't show up in device manager (windows 8) it will make the noise and will only show up in my computer if I have usb debugging enabled and select media device, any other combination it won't show up in device manager or in my computer.
What do I do?

foliage said:
I also have this problem, my nexus 4 won't show up in device manager (windows 8) it will make the noise and will only show up in my computer if I have usb debugging enabled and select media device, any other combination it won't show up in device manager or in my computer.
What do I do?
Click to expand...
Click to collapse
Today i've got my new Nexus 4, succesfully unlocked & rooted with this toolkit, but had problems with installing google usb drivers and Universal Adb Driver.
The solution is based on several steps.
I solved my problem this way, hope it will help someone
I have windows 8.1 64-bit, so i had to solve firts the problem with driver signature
1.
How To Disable And Bypass Driver Signature Enforcement In Windows 8
Tutorial link
Tutorial video
If you have problems with driver installations, try this:
2.
Remove hidden existing Nexus 4 or Android Nexus ADB Interface in Device Manager
i had to cleanup the drivers remained after few failed adb driver installations because of the problem in the first step
- (OPTIONAL) Install Nexus Root Toolkit and run it
- (OPTIONAL) click on Full Driver Installation Guide and at step 1
- open Device Manager, click View and select the option Show hidden devices
- now you will see some additional hidden devices (greyed out)
- because i wanted to install the drivers from start i deleted them, that means uninstalled them and added checkmark for deleting local files
- screenshot is attached so you can better understand
Remove the devices that could make problems
3.
- Run Nexus Root Toolkit
- click on Full Driver Installation Guide
- at Step 1 open USBDeview
- in my situation i deleted all the entries with google name
- screenshot in the attach
Final step:
4.
Install drivers for Nexus 4
- Run Nexus Root Toolkit
- click on Full Driver Installation Guide
- at Step 2 i installed Solution #1 - Universal drivers
- maybe you'll need to manually add drivers, if you have an entry in Device Manager that as yellow !
- right click on it - update drivers - browse my computer for drivers - I've added the path to installed Solution #1 - Universal drivers
"C:\Program Files (x86)\ClockworkMod\Universal Adb Driver"
- i repeated it for connection as mtp, ptp and none of that - selection for this is made on nexus: settings - storage - ... in the right upper corner - usb computer connection. so this way the device had installed the needed drivers
- screenshot is added in attach
I've used Wugs Toolkit for installing drivers and after that unlocking and rooting the Nexus 4.
My problem was that there was present HIDDEN ADB Interface under Android Device, after above mentioned steps, my nexus is working properly when connected as MTP device

danielms22 said:
1 quick Forum search would easily have solved this for you.
But since you're here:
1. Enable USB debugging: Go to phone settings -> About -> Tap build number repeatedly until developer menu is enabled. Go there and tick USB debugging.
2. On your PC, go to your device manager (when the Phone is plugged in and set to MTP), locate the phone, right click on it -> properties
3. go to the Driver tab
4. click Update Driver
5. click Browse my Computer for driver software
6. click Let my pick...
7. select USB Composite Device
8. finish up with the assistant
9. be happy
Click to expand...
Click to collapse
Brilliant!!!

Not showing up in device manager
danielms22 said:
1 quick Forum search would easily have solved this for you.
But since you're here:
1. Enable USB debugging: Go to phone settings -> About -> Tap build number repeatedly until developer menu is enabled. Go there and tick USB debugging.
2. On your PC, go to your device manager (when the Phone is plugged in and set to MTP), locate the phone, right click on it -> properties
3. go to the Driver tab
4. click Update Driver
5. click Browse my Computer for driver software
6. click Let my pick...
7. select USB Composite Device
8. finish up with the assistant
9. be happy
Click to expand...
Click to collapse
I am also facing this issue since flashing 5.0. It doesn't even come up on device manager. Any suggestions?

amj2403 said:
I am also facing this issue since flashing 5.0. It doesn't even come up on device manager. Any suggestions?
Click to expand...
Click to collapse
same here ==

Yu Yureka USB Connection Problem

Since many guys are not able to connect their yureka phone to PC so for them this thread might be helpful. I was also facing the same problem, even USB computer connection setting was not popping up. So following are the steps to resolve that problem.
1. Go to Settings -> About Phone -> Tap several times on Build Number to enable developer Options if you haven't enabled it yet.
2. Now You can see one setting titled "{ } Developer options" under Settings Menu. Tap on developer options and enable "Android Debugging".
3. Now connect your phone to PC via USB cable. Now You will see that your phone is successfully connected for debugging. Now without disconnection your phone from PC, go to settings->Storage->Menu (Three vertical Dots at top right corner of the screen). Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox.
4. Now you are ready to access your internal and external sd cards of your phone. Enjoy

U saved me BRO!!..was tired of using OTH
U saved me BRO!!..was tired of using OTH

Applying all things you said but yureka not connect with computer

USB Computer Connection is still not popping
Hi, I have tried all that is said above, but still I am unable to connect my Yureka to PC. USB Computer Connection is still not popping any options.. Please help

RAUSHAN0704 said:
Since many guys are not able to connect their yureka phone to PC so for them this thread might be helpful. I was also facing the same problem, even USB computer connection setting was not popping up. So following are the steps to resolve that problem.
1. Go to Settings -> About Phone -> Tap several times on Build Number to enable developer Options if you haven't enabled it yet.
2. Now You can see one setting titled "{ } Developer options" under Settings Menu. Tap on developer options and enable "Android Debugging".
3. Now connect your phone to PC via USB cable. Now You will see that your phone is successfully connected for debugging. Now without disconnection your phone from PC, go to settings->Storage->Menu (Three vertical Dots at top right corner of the screen). Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox.
4. Now you are ready to access your internal and external sd cards of your phone. Enjoy
Click to expand...
Click to collapse
well i have tried that but it wont even detect my yureka. IT DOESNT EvEN SHOW A UN RECOGNIZED DEVICE. HOW TO RESOLVe
?

Problem Solved
1. Proceed as Above.
2. Reboot your Phone.
3. Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox.
Problem Solved...

The problem is not in the phone, or can't be solved by it
Actually you have to do this via pc.
1)search update drivers and find the update device drivers option
2)in other devices find Android and double click
3)click the driver tab
4)click update driver
Worked for me ?????

PC connection Still its not working
RAUSHAN0704 said:
Since many guys are not able to connect their yureka phone to PC so for them this thread might be helpful. I was also facing the same problem, even USB computer connection setting was not popping up. So following are the steps to resolve that problem.
1. Go to Settings -> About Phone -> Tap several times on Build Number to enable developer Options if you haven't enabled it yet.
2. Now You can see one setting titled "{ } Developer options" under Settings Menu. Tap on developer options and enable "Android Debugging".
3. Now connect your phone to PC via USB cable. Now You will see that your phone is successfully connected for debugging. Now without disconnection your phone from PC, go to settings->Storage->Menu (Three vertical Dots at top right corner of the screen). Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox.
4. Now you are ready to access your internal and external sd cards of your phone. Enjoy
Click to expand...
Click to collapse
Hi..
After pressing "USB computer connection" USB setting Popup is not coming. and it says "USB is now Disconnected"
can any one please help me ?
---------- Post added at 08:05 AM ---------- Previous post was at 07:59 AM ----------
Sahil Badal said:
1. Proceed as Above.
2. Reboot your Phone.
3. Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox.
Problem Solved...
Click to expand...
Click to collapse
After pressing "USB computer connection" USB setting Popup is not coming. and it says "USB is now Disconnected"

Yureka not connect to PC
[[/B][/B]
RAUSHAN0704 said:
Since many guys are not able to connect their yureka phone to PC so for them this thread might be helpful. I was also facing the same problem, even USB computer connection setting was not popping up. So following are the steps to resolve that problem.
1. Go to Settings -> About Phone -> Tap several times on Build Number to enable developer Options if you haven't enabled it yet.
2. Now You can see one setting titled "{ } Developer options" under Settings Menu. Tap on developer options and enable "Android Debugging".
3. Now connect your phone to PC via USB cable. Now You will see that your phone is successfully connected for debugging. Now without disconnection your phone from PC, go to settings->Storage->Menu (Three vertical Dots at top right corner of the screen). Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox.
4. Now you are ready to access your internal and external sd cards of your phone. Enjoy
Click to expand...
Click to collapse
I have followed all above steps, but not shows USB connection.

I am also getting the same problem "After pressing "USB computer connection" USB setting Popup is not coming. and it says "USB is now Disconnected" ", this problem is after getting my replacement handset.

Hi, I have tried all that is said a, but still I am unable to connect my Yureka to PC. USB Computer Connection is still not popping any options.. Please help vikas meena 9694746144

Dear Sir,
As per your instruction i go to the setting but as u written
"Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox. "
after tapping computer connection nothing pop up arises. I can not enable Media Device (MTP)
Please guide me.
Suresh

vertexpac said:
I am also getting the same problem "After pressing "USB computer connection" USB setting Popup is not coming. and it says "USB is now Disconnected" ", this problem is after getting my replacement handset.
Click to expand...
Click to collapse
did u get any solution bro????..... i cant copy files to pc and root
---------- Post added at 05:33 AM ---------- Previous post was at 05:30 AM ----------
shadowkill97 said:
well i have tried that but it wont even detect my yureka. IT DOESNT EvEN SHOW A UN RECOGNIZED DEVICE. HOW TO RESOLVe
?
Click to expand...
Click to collapse
did u got any solution bro... i cant connect my yureka to pc. i want to root it. But i cant connect it

USB connection problem
I am also getting the same problem "After pressing "USB computer connection" USB setting Popup is not coming. and it says "USB is now Disconnected" ", plz help me

yureka AO 5510
Sir,
My yureka AO 5510 hardbricked and i used emmc image and enter into fastboot mode ( by only pressing power button it can switch on and work) but to flash this is not shown in device manager. I tried with usb driver, adb driver, nothing happend.... and gave to shop and changed its usb port.... but no use....
i can power on it with this memory card or go to fastboot mode.... can not connect to PC.... Please help me....

thank you for your practical guidance, because since so many days and several times I tried to connect with my laptop, last i thought to install some yu drives in my laptop, but this is a very useful points, you are putforth in this moment. once again thank you for the substantial helping tendency you have shown. may proceed it in future to help others,

i am using yu yereka lolipop os and windows 10 x64 pro and tried all method to install drivers but even when i connect my yu yureka ao5510 then it shows me (device disciptor request fail)error code 43.i did all thing from disable driver enforcement and various adb drivers but not success yet..
and when normally connet phone to pc it also not showing the adb option and mtp driver.i aslo tried with different pc but same problem....
plz guy help me!!!!

Got ot developer tools and enable the android debugging.. reboot the mobile
After reboot a pop up window will be opening and asks for disable the android debugging .. disable it in developer tools and then connect the usb cable again . then the pop up will be coming as usual ...and problem got solved

Yureka not connect to any pc
Pc shows popup that the device is malfunctioned.
In device manager it says device dicriptor request failed.

vrishabhv2 said:
i am using yu yereka lolipop os and windows 10 x64 pro and tried all method to install drivers but even when i connect my yu yureka ao5510 then it shows me (device disciptor request fail)error code 43.i did all thing from disable driver enforcement and various adb drivers but not success yet..
and when normally connet phone to pc it also not showing the adb option and mtp driver.i aslo tried with different pc but same problem....
plz guy help me!!!!
Click to expand...
Click to collapse
did you find any solution?

Yu Yureka: Not Recognizing In PC Though Enabling The As MTP- Windows 8.1-32 bit- MTP

Yu yureka- not recognising in pc though enabling the as mtp- windows 8.1-32 bit- mtp
YU YUREKA- NOT RECOGNISING IN PC THOUGH ENABLING THE AS MTP- WINDOWS 8.1-32 BIT- MTP not recognising. I have downloaded and updated all drivers but still not working. pc is not recognising my phone. i have done all the things adb interface kindly help friends

which rom?
try enabling developer options and untick usb debugging , this might help

Since many guys are not able to connect their yureka phone to PC so for them this thread might be helpful. I was also facing the same problem, even USB computer connection setting was not popping up. So following are the steps to resolve that problem.
1. Go to Settings -> About Phone -> Tap several times on Build Number to enable developer Options if you haven't enabled it yet.
2. Now You can see one setting titled "{ } Developer options" under Settings Menu. Tap on developer options and enable "Android Debugging".
3. Now connect your phone to PC via USB cable. Now You will see that your phone is successfully connected for debugging. Now without disconnection your phone from PC, go to settings->Storage->Menu (Three vertical Dots at top right corner of the screen). Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox.
4. Now you are ready to access your internal and external sd cards of your phone. Enjoy

Internal storage does not show when I connect phone to computer

I have the Motorola drivers already installed and USB debugging ON. But when I connect the phone to the computer the internal storage does not show on the computer. I have to go back to the Developer Options switch the USB config from MTP to PTP and back to MTP to see the internal storage. Just an annoying extra step.
Is there a permanent fix to this? The phone is rooted.

ROM?

Your settings in Developer Options are not relevant. When you connect it to the PC, pull down the notification shade and find the entry that says USB Charging and tap it, then select MTP mode, it should appear in My Computer after that if it doesn't open automatically.

acejavelin said:
Your settings in Developer Options are not relevant. When you connect it to the PC, pull down the notification shade and find the entry that says USB Charging and tap it, then select MTP mode, it should appear in My Computer after that if it doesn't open automatically.
Click to expand...
Click to collapse
Thanks Ace! You have helped me out several times with accurate answers before. You do live up to your screen name! ::highfive: