Related
As I know, in the Registry
Hkey Local Machine\Software\HTC\Camera\RecParam\MP4Medium
Hkey Local Machine\Software\HTC\Camera\RecParam\MP4Small
I am able to change the factory FrameRate value from 10 to 19...
This is good news
Well, the Medium size is 176x144 pixel and Small size is 128x96 pixel by default.
But!
There is another Key :
Hkey Local Machine\Software\HTC\Camera\RecParam\MP4Large, but I am not able to select Large option in the Camera Settings page, just only Small and Medium.
What shell I have to change in the Registry to make Large videosize available in the Camera Settings page ?
(And what dimension should I use by selecting Large ? 320x240 ?)
THX
mesa
mesa said:
As I know, in the Registry
Hkey Local Machine\Software\HTC\Camera\RecParam\MP4Medium
Hkey Local Machine\Software\HTC\Camera\RecParam\MP4Small
I am able to change the factory FrameRate value from 10 to 19...
This is good news
Well, the Medium size is 176x144 pixel and Small size is 128x96 pixel by default.
But!
There is another Key :
Hkey Local Machine\Software\HTC\Camera\RecParam\MP4Large, but I am not able to select Large option in the Camera Settings page, just only Small and Medium.
What shell I have to change in the Registry to make Large videosize available in the Camera Settings page ?
(And what dimension should I use by selecting Large ? 320x240 ?)
THX
mesa
Click to expand...
Click to collapse
You can not. there is no 320X240 in Charmer's Video Camera application.
But you can use "CoolCamera" for even 640X480 in video mode.
download it from here: http://www.ateksoft.com/files/CoolCamera.cab
By simply changing the brightness level to -2.0 you will no longer have a blur - it's like changing the ISO on a camera and the FPS will jump by over 50%. check it out in full here: http://www.fuzemobility.com/decrease-the-blur-of-your-camera-really/
bugsykoosh said:
By simply changing the brightness level to -2.0 you will no longer have a blur - it's like changing the ISO on a camera and the FPS will jump by over 50%. check it out in full here: http://www.fuzemobility.com/decrease-the-blur-of-your-camera-really/
Click to expand...
Click to collapse
Sounds excellent, will try this out!!
EDIT
I have tried this and can find no improvement whatsoever. As kkchan stated below, all I notice is the picture has become darker due to the decrease in brightness level. I have even tried this at -1.0, but still no improvement
Hi,
I tried, no improvement, sometime seem even worst because the photo become darker.
kkchan said:
Hi,
I tried, no improvement, sometime seem even worst because the photo become darker.
Click to expand...
Click to collapse
I did it myself on a Touch HD and went from +2 and changed it to -2 and it was a world of difference. At +2 any movement was a blur and at -2 I could move the camera and still get a clean shot
Fallen Spartan said:
Sounds excellent, will try this out!!
EDIT
I have tried this and can find no improvement whatsoever. As kkchan stated below, all I notice is the picture has become darker due to the decrease in brightness level. I have even tried this at -1.0, but still no improvement
Click to expand...
Click to collapse
In extreme light situtations (a bright day) there's almost no difference in speed but the HD never had a problem in very high light. The real impact is in moderate to low light. So far there are 2 comments at FuzeMobility both stating that it works effectively and I tested it last night on the HD and took an unusable camera and had something that could take a photo. Did you guys enable the FPS info to see if there was a change?
bugsykoosh said:
In extreme light situtations (a bright day) there's almost no difference in speed but the HD never had a problem in very high light. The real impact is in moderate to low light. So far there are 2 comments at FuzeMobility both stating that it works effectively and I tested it last night on the HD and took an unusable camera and had something that could take a photo. Did you guys enable the FPS info to see if there was a change?
Click to expand...
Click to collapse
I had already tried tweaking a number of settings for both the camera & video to get a better pic. This may have had some effect on these new settings. I will play around with it and see what I come up with
Fallen Spartan said:
I had already tried tweaking a number of settings for both the camera & video to get a better pic. This may have had some effect on these new settings. I will play around with it and see what I come up with
Click to expand...
Click to collapse
What settings if you don't mind? I'm always up for more tweaking I know about decreasing the delay times:
HKLM/Software/HTC/Camera/Captparam/ and set CaptureTimer = 0 and EnableCapKeyDelay = 0 and CapKeyDelayTime = 0
and changing the panaramic photo size...I hope you have a few more though
bugsykoosh said:
What settings if you don't mind? I'm always up for more tweaking I know about decreasing the delay times:
HKLM/Software/HTC/Camera/Captparam/ and set CaptureTimer = 0 and EnableCapKeyDelay = 0 and CapKeyDelayTime = 0
and changing the panaramic photo size...I hope you have a few more though
Click to expand...
Click to collapse
Basically I read through a lot of threads regarding enhancing camera and have changed numerous things including those mentioned by yourself, some I can't remember to be honest and those mentioned in the wiki listed below. Also using HD Tweak etc
Increase Quality of Photos
To increase the quality of photos, open the Camera, go to Settings, Advanced, then Image Properties. Increase Contrast to 5, Saturation to 5, and Sharpness to 4. Now you will have better definition and much more realistic colours. Also don't forget to choose Super Fine under Quality in Advanced Settings menu.
Reduce Blurriness in Photos
To focus better, have shutter set just to Touch. After you have touched you have the whole three seconds to steady your hand and take a non-blurry photo.
Activate Hidden Photo Modes
You can activate hidden photo modes using the 'HD Tweak' app. Make sure to leave the resolutions for these modes at 1 megapixel though or they may not work properly. For for the more advanced users, use the following reg entries:
To enable Burst mode
Mobile Device\HKLM\Software\HTC\Camera\P6
set "Enable" on "1"
To enable Sports mode:
Mobile Device\HKLM\Software\HTC\Camera\P8
set "Enable" on "1"
To enable Video Share mode:
Mobile Device\HKLM\Software\HTC\Camera\P9
set "Enable" on "1"
To enable GPS Photo mode:
Mobile Device\HKLM\Software\HTC\Camera\P10
set "Enable" on "1"
Get True 5 Mega pixel Resolution When Using Camera
To get 5MP instead of 4MP resolution when using your camera, you must switch off Widescreen mode in the 'Advanced' Menu.
Normal screen = 2592 x 1944 pixels = 5,038,848 pixels = 5MP
Widescreen = 2592 x 1552 pixels = 4,022,784 pixels = 4MP
Get Better Video Quality When Using Camera
Use MPEG format instead of H.263 for better quality video output. This option can be found by going to the Advanced Setting from the Video Settings menu. Once there, go to Capture Format and change format if necessary.
If I can think of any more I'll let you know.
These threads may help:
Best Camera Setting for Taking Pictures
Blackstone Camera 2009 (HTC) Discussion
Fallen Spartan said:
Basically I read through a lot of threads regarding enhancing camera and have changed numerous things including those mentioned by yourself, some I can't remember to be honest and those mentioned in the wiki listed below. Also using HD Tweak etc
Increase Quality of Photos
To increase the quality of photos, open the Camera, go to Settings, Advanced, then Image Properties. Increase Contrast to 5, Saturation to 5, and Sharpness to 4. Now you will have better definition and much more realistic colours. Also don't forget to choose Super Fine under Quality in Advanced Settings menu.
Reduce Blurriness in Photos
To focus better, have shutter set just to Touch. After you have touched you have the whole three seconds to steady your hand and take a non-blurry photo.
Activate Hidden Photo Modes
You can activate hidden photo modes using the 'HD Tweak' app. Make sure to leave the resolutions for these modes at 1 megapixel though or they may not work properly. For for the more advanced users, use the following reg entries:
To enable Burst mode
Mobile Device\HKLM\Software\HTC\Camera\P6
set "Enable" on "1"
To enable Sports mode:
Mobile Device\HKLM\Software\HTC\Camera\P8
set "Enable" on "1"
To enable Video Share mode:
Mobile Device\HKLM\Software\HTC\Camera\P9
set "Enable" on "1"
To enable GPS Photo mode:
Mobile Device\HKLM\Software\HTC\Camera\P10
set "Enable" on "1"
Get True 5 Mega pixel Resolution When Using Camera
To get 5MP instead of 4MP resolution when using your camera, you must switch off Widescreen mode in the 'Advanced' Menu.
Normal screen = 2592 x 1944 pixels = 5,038,848 pixels = 5MP
Widescreen = 2592 x 1552 pixels = 4,022,784 pixels = 4MP
Get Better Video Quality When Using Camera
Use MPEG format instead of H.263 for better quality video output. This option can be found by going to the Advanced Setting from the Video Settings menu. Once there, go to Capture Format and change format if necessary.
If I can think of any more I'll let you know.
These threads may help:
Best Camera Setting for Taking Pictures
Blackstone Camera 2009 (HTC) Discussion
Click to expand...
Click to collapse
Unfortunately I know about those Thank you though - I'm sure a lot of people will benefit from that list. The ability to do infinite zoom is still elusive as far as I know...
bugsykoosh said:
Unfortunately I know about those Thank you though - I'm sure a lot of people will benefit from that list. The ability to do infinite zoom is still elusive as far as I know...
Click to expand...
Click to collapse
More settings/tweaks included in those 2 threads I believe though
Adaptive Zoom
Don’t want to zoom to click a link? Try this..
1. Open opera’s preference editor by going to the following link:
opera:config
Note there is no http:// proceeding the link.
2. Click on Adaptive Zoom and try the following settings:
Browser Buffer Height = 4096
Browser Buffer Width = 800
Maximum Zoom = 100
Minimum Overview Zoom = 100
Minimum Zoom = 100
Virtual Screen Width = 800
Zoom Slider Maxinmum = 200
This should set your screen up so it no long needs to zoom to click a link but also makes the virtual page width the same size as the screen in landscape mode.
Slothie said:
Adaptive Zoom
Don’t want to zoom to click a link? Try this..
1. Open opera’s preference editor by going to the following link:
opera:config
Note there is no http:// proceeding the link.
2. Click on Adaptive Zoom and try the following settings:
Browser Buffer Width = 800
Maximum Zoom = 100
Minimum Overview Zoom = 100
Minimum Zoom = 100
Virtual Screen Width = 800
Zoom Slider Maxinmum = 200
This should set your screen up so it no long needs to zoom to click a link but also makes the virtual page width the same size as the screen in landscape mode.
Click to expand...
Click to collapse
Hi,
thanks for the Tip ... but,
In 9.7b1 I can't find:
- Maximum Zoom
- Maximum Overview Zoom
- Minimum Zoom
- Zoom Slider Maximum
in 9.5 they exist but not in 9.7
not sure if it's something i've done, but after making those changes i can't launch Opera any more!!
I get the htc loading page for about about 20 seconds and then it just closes - anyone else had this problem or know how to solve?
Slothie said:
Adaptive Zoom
Don’t want to zoom to click a link? Try this..
1. Open opera’s preference editor by going to the following link:
opera:config
Note there is no http:// proceeding the link.
2. Click on Adaptive Zoom and try the following settings:
Browser Buffer Height = 4096
Browser Buffer Width = 800
Maximum Zoom = 100
Minimum Overview Zoom = 100
Minimum Zoom = 100
Virtual Screen Width = 800
Zoom Slider Maxinmum = 200
This should set your screen up so it no long needs to zoom to click a link but also makes the virtual page width the same size as the screen in landscape mode.
Click to expand...
Click to collapse
It also makes the text tiny.
Does anyone have the original settings please, stupidly I did not note them down.
MaskedMarauder said:
It also makes the text tiny.
Does anyone have the original settings please, stupidly I did not note them down.
Click to expand...
Click to collapse
In Opera 9.5 i have the following settings which allow me to open links without zooming. Min overview zoom is the only changed variable.
Browser Buffer Height = 1400
Browser Buffer Width = 960
Maximum Zoom = 200
Minimum Overview Zoom = 85
Minimum Zoom = 160
Virtual Screen Width = 960
Zoom Slider Maxinmum = 500
So will altering these settings change the width of text elements and reduce the amount of zoom? I'm running this on an HX4700 with a 4.0" screen (I know, I'm getting my touch HD in less than 30 hours). When the zoom action happens, it automatically zooms to the width of the column element (ingenious) so I can scroll throught he column without side scrolling. However the width of the elements are too narrow and as such causes the zoom to be too high. I'd like to use the 4" display and VGA rez to read smaller but more amount of text.
I've no idea mate sorry. I just copies and writes up what i sees
MaskedMarauder said:
Does anyone have the original settings please, stupidly I did not note them down.
Click to expand...
Click to collapse
Just noted these down from my new HD, here they are:
Browser Buffer Height = 1400
Browser Buffer Width = 960
Maximum Zoom = 200
Minimum Overview Zoom = 60
Minimum Zoom = 160
Virtual Screen Width = 960
Zoom Slider Maxinmum = 500
Thank you very much saad.salman & Freypal
i've been looking for that setting (minimum overview zoom) for a while - cheers!!
Riceburner said:
i've been looking for that setting (minimum overview zoom) for a while - cheers!!
Click to expand...
Click to collapse
it doesn't work in Diamond 2 Opera ><
nick666 said:
not sure if it's something i've done, but after making those changes i can't launch Opera any more!!
I get the htc loading page for about about 20 seconds and then it just closes - anyone else had this problem or know how to solve?
Click to expand...
Click to collapse
Get a hold of opera.ini >>windows>opera9
edit the file, the first few lines are the ones you will need to change.
Just copied this from mine..
[Adaptive Zoom]
Minimum Zoom=160
Minimum Overview Zoom=70
Browser Buffer Height=1400
Browser Buffer Width=960
Maximum Zoom=200
Virtual Screen Width=960
Zoom Slider Maximum=500
after changing back, having had the same problem you did...
Good Luck
Slothie said:
This should set your screen up so it no long needs to zoom to click a link but also makes the virtual page width the same size as the screen in landscape mode.
Click to expand...
Click to collapse
Just note that with this tweak you will lose the ability to trigger mouseover action for links.
Neville.Holland said:
Get a hold of opera.ini >>windows>opera9
edit the file, the first few lines are the ones you will need to change.
Just copied this from mine..
[Adaptive Zoom]
Minimum Zoom=160
Minimum Overview Zoom=70
Browser Buffer Height=1400
Browser Buffer Width=960
Maximum Zoom=200
Virtual Screen Width=960
Zoom Slider Maximum=500
after changing back, having had the same problem you did...
Good Luck
Click to expand...
Click to collapse
I had the same problem but I can't find the file I can't search my phone's files either...
Ekkoe said:
I had the same problem but I can't find the file I can't search my phone's files either...
Click to expand...
Click to collapse
I could only imagine it being in the one of the following
\Windows
\Windows\Opera
Possible \Application Data but unlikely I think.
I'm running the standard 6.1 HTC original ROM.
Forget all that. Everything is running. It didn't go as smooth and understandable as I might have hoped, but it works now. Thanks!
Hi,
I'm making a script to launch WMP when my A2DP headphones are connecting to my phone, but I'd like to play all my songs too. In Titanium, there's the Music panel with the "Play all songs" button, and I'd like to know if it is possible to create a shortcut making the same thing.
Thanks
u could maybe make a playlist (.asx) with Mortscript and launch it...
nop, it's not what I'd like, and this for a good reason : launching WMP with a huge playlist (more than 500 songs) and you'll have to kill it... But launch WMP with the "Play All songs" button, and it works fine everytime
That's why I insist on the "play all songs" thing
ah.
well u could use mortscript to detect that the player is idle and then queue up the next track...
howdykeith said:
ah.
well u could use mortscript to detect that the player is idle and then queue up the next track...
Click to expand...
Click to collapse
Well, yeah... But it is just 1000x longer than just finding the good parameter for WMP or the right way to launch it playing all the songs ^^
But if I don't find a thing, maybe I'll make this like you said
Code:
#If Nitrogen running
If ( ProcExists( "Nitrogen.exe" ) )
#WHAT's PlayStatus??
#Paused
If ( PlayStatus <2 )
TickerDatum = "Nitrogen is Paused"
Else
#Playing song
SongTitle = RegRead( HKLM,"\System\State\Nitrogen\","SongTitle" )
SongArtist = RegRead( HKLM,"\System\State\Nitrogen\","SongArtist" )
TickerDatum = ( SongTitle eq "(none)") ? "Nitrogen is Playing" : SongTitle & " by " & SongArtist
#vol
EndIf
SongVol = RegRead( HKLM,"\System\State\Nitrogen\WM_NTG_GETVOLUME","WM_USER+3005" )
TickerDatum = (SongVol) ? "Nitrogen is Mute" : " Nitrogen Volume is at " & SongVol & "%"
#TimeElapsed - secs
#TimeTotal - secs
SongElaS = RegRead( HKLM,"\System\State\Nitrogen\","TimeElapsed" )
SongTotS = RegRead( HKLM,"\System\State\Nitrogen\","TimeTotal" )
TickerDatum = "At: " & (SongElaS / SongTotS) & "% of the Track... " & SongElaS & " Seconds" & " of " & SongTotS & " Seconds"
Call("PostStatus", TickerDatum, Delay, Icon)
Else
#wmp
If (RegKeyExists( HKCU,"System\State\MediaPlayer" ))
Icon = "CD1"
SongTitle = RegRead( HKCU,"System\State\MediaPlayer\","Title" )
SongArtist = RegRead( HKCU,"System\State\MediaPlayer\","WM/OriginalArtist" )
SongTrack = RegRead( HKCU,"System\State\MediaPlayer\","WM/TrackNumber" )
SongElapsed = "T" & RegRead( HKCU,"System\State\MediaPlayer\","Elapsed" )
sleep(Tick)
If (not SongElapsed eq ("T" & RegRead( HKCU,"System\State\MediaPlayer\","Elapsed")) )
TickerDatum = SongTitle & " by " & SongArtist
EndIf
EndIf
EndIf
Here is some code that doesn't look like i ever tested (PlayStatus?)...
Back to my script project, and can't find the simple code to just launch WMP and play all the files in the library...
Some of you may have already seen my scrolling mod posted in another thread. I've made better PhysicsEngine modification, more customizable than it is by default.
All parameters are listed in *.rgu, but take a look at binary parameters, such as:
Code:
"SpringConstant"=hex:8F,C2,75,3D
That's 0.06 in hex-form. You can convert floating point numbers to hex using this service: http://gregstoll.dyndns.org/~gregstoll/floattohex/. Don't forget to change byte order, e.g. 0x12345678 -> 78,56,34,12
Thanks to OndraSter for help.
Please, share settings you like. No need to make a soft-reset after setting changes because I've removed registry values caching. Also you can test it without flashing, just putting PhysicsEngine.dll file to \Windows\.
Thanks ultrashot, here are my Settings
Description: not that fast and elastic as default from ultrashot.
"GainVelocityMultiplier"=dword:00000006
"GainVelocityDivider"=dword:00000003
"GainUserTimeMultiplier"=dword:00000006
"GainUserTimeDivider"=dword:00000002
"DragCoeff"=hex:8F,C2,75,3D
"DragStopVel"=dword:00000004
"SpringConstant"=hex:00,00,48,42
"ScrollMass"=hex:9A,99,19,3E
lcd4linux said:
Thanks ultrashot, here are my Settings
"GainVelocityMultiplier"=dword:00000006
"GainVelocityDivider"=dword:00000003
"GainUserTimeMultiplier"=dword:00000006
"GainUserTimeDivider"=dword:00000002
"DragCoeff"=hex:8F,C2,75,3D
"DragStopVel"=dword:00000004
"SpringConstant"=hex:00,00,48,42
"ScrollMass"=hex:9A,99,19,3E
Click to expand...
Click to collapse
please make a brief description of your settings, otherwise it will be hard to determine what they do without testing.
ultrashot, I'm still playing with the meanings but I've tried lcd4linux's settings - and they look nice for Leo.
With the defaults of a package the scrolling in my case is a bit .... hmm... nonlinear I would say - there is a sharp jerk at the beginning of the movement, and then in a moment - slowing down - up to stopping scrolling process...
Settings by lcd4linux remove that jerk and slowing down effect - scrolling is pretty smooth and fast....
Sorry if it sounds messy - we can talk later in private in our native tongue
lcd4linux, Vielen Dank für .... your fast report
AndrewSh said:
ultrashot, I'm still playing with the meanings but I've tried lcd4linux's settings - and they look nice for Leo.
With the defaults of a package the scrolling in my case is a bit .... hmm... nonlinear I would say - there is a sharp jerk at the beginning of the movement, and then in a moment - slowing down - up to stopping scrolling process...
Settings by lcd4linux remove that jerk and slowing down effect - scrolling is pretty smooth and fast....
Sorry if it sounds messy - we can talk later in private in our native tongue
Click to expand...
Click to collapse
what's good for Leo isn't very good for Kovsky - I see opposite effects on my device
thanks for this mod ultrashot.
Disabling Paginated Scrolling effect for COM2 start menu
1) open shell32.exe (or shell32.exe\S000) with hex-editor
2) patch this:
Code:
from: 505096E5 74308605 747096E5 0020A0E3
to: 505096E5 747096E5 747096E5 0020A0E3
from: 0030A0D3 1C808DC5 1C308DD5 7C3096E5
to: 0030A0C3 0030A0E3 1C308DE5 7C3096E5
from: 24208DB5 24308DA5 703096E5 982096E5
to: 24308DE5 703096E5 703096E5 982096E5
from: 943086E5 20E08DE5 747086E5 28E08DE5
to 943086E5 20E08DE5 20E08DE5 28E08DE5
attached my shell32.exe (module and file), build 21913
Thanks to OndraSter
first off: great mod, will allow people to adapt to device power...
what are the standard/unmodded values? so i can start trial and error mods...
just tried your dll mod and it was not smooth when scrolling, changing parameters made it ok again...but id like to know m$ values...
cheers
if you want the default ms values cooked in:
Code:
REGEDIT4
[HKEY_LOCAL_MACHINE\SYSTEM\GWE\Physics]
;Totally new parameters:
"GainVelocityMultiplier"=dword:00000001 ;multiplier for initial velocity
"GainVelocityDivider"=dword:00000001 ;divider for initial velocity
"GainUserTimeMultiplier"=dword:00000001 ;usertime multiplier
"GainUserTimeDivider"=dword:00000001 ;usertime divider
;Decelerate speed (0.06 by default 8F,C2,75,3D)
"DragCoeff"=hex:8F,C2,75,3D
;Velocity at the end of scrolling, not standard parameter (dec 336 dword 150 by default)
"DragStopVel"=dword:00000150
;bigger it is, the faster rubberband effect is. (30.0 by default 00,00,F0,41)
"SpringConstant"=hex:00,00,F0,41
;mass of imaginated object, lower it is, faster the rubberband effect is. (0.1 by default CD,CC,CC,3D)
"ScrollMass"=hex:CD,CC,CC,3D
Simple float to hex converter.
Regarding default settings: if you delete all these parameters PE.dll will reset settings.
Offtopic
.....goddamn tired to push "Thanx" in your topics....
Thank you, buddy!!!
my own settings (htc hd2):
Code:
[HKEY_LOCAL_MACHINE\SYSTEM\GWE\Physics]
;Totally new parameters:
"GainVelocityMultiplier"=dword:00000002 ;multiplier for initial velocity
"GainVelocityDivider"=dword:00000001 ;divider for initial velocity
"GainUserTimeMultiplier"=dword:00000001 ;usertime multiplier
"GainUserTimeDivider"=dword:00000001 ;usertime divider
;Decelerate speed (0.06 by default 8F,C2,75,3D)
"DragCoeff"=hex:8F,C2,75,3D
;Velocity at the end of scrolling, not standard parameter (dec 336 dword 150 by default)
"DragStopVel"=dword:00000150
;bigger it is, the faster rubberband effect is. (30.0 by default 00,00,f0,41 mytweak 0.06 8F,C2,75,3D)
"SpringConstant"=hex:8F,C2,75,3D
;mass of imaginated object, lower it is, faster the rubberband effect is. (0.1 by default cd,cc,cc,3d mytweak 0.0003 17,B7,51,39)
"ScrollMass"=hex:17,B7,51,39
Ultrashot, can we also tweak BounceHeight? It looks like there's a reg key for it as well.
Farmer Ted said:
Ultrashot, can we also tweak BounceHeight? It looks like there's a reg key for it as well.
Click to expand...
Click to collapse
oh, yes. Forgot to add it.
BounceHeight=10 (DWORD, dec)
BounceDuration=1000 (DWORD, dec)
it isn't so useful though.
Thanks, that kicks ass. I've got some serious bounce going on now, lol.
Surely a silly question.. but just curious to know what this will do
Thanks.
Here's a cab with settings I like on my fuze; check \program files\ultrashot for a list of the settings, as well as the stock ones. I'm putting this out there just for anyone who isn't familiar with recmodding or importing reg keys.
These are the settings that work for me:
[HKEY_LOCAL_MACHINE\SYSTEM\GWE\Physics]
"DragStopVel"=dword:00000150 ;stock = 150-ultra had it at 4
"ScrollMass"=hex:17,b7,d1,38 ;stock = AC,C5,27,37 which is 0.1
"SpringConstant"=hex:cd,cc,cc,3d ; stock = 8F,C2,75,3D which is 30
"DragCoeff"=hex:8f,c2,f5,3c ; stock = 8F,C2,75,3D which is 0.06
"GainVelocityDivider"=dword:00000000 ; ultra has 3
"GainUserTimeDivider"=dword:00000000 ; ultra has 1
"GainUserTimeMultiplier"=dword:00000001 ; ultra has 3
"GainVelocityMultiplier"=dword:00000001 ; ultra has 4
"BounceHeight"=dword:00000014
"BounceDuration"=dword:000004b0 ; 1200 ms-stock is 1000 (3E8)
Click to expand...
Click to collapse