Does anyone know when a easier root method will be installed?
I got into adb shell once and i can not duplicate that method again.
Any information would be greatly appreciated either posted on this thread or pm'd to me. Thanks.
when you were in it did u root?
No i did not push the update i messed up and didn't time it late.
chasehale10 said:
No i did not push the update i messed up and didn't time it late.
Click to expand...
Click to collapse
Uhh, if you messed the timing up, all you got to do is try again, not have to get in there again. So you messed up, you just repeat it until you get the timing right.
to late because in the 10 min video he says if you messed up to start over.
no he says restart the 1.bat like everyone else does... i followed the video and never start over from root.. just reload the 1.bat and try from there not restart the whole thing
god im an idot, i thought i had to restart the whole adb shell. Now i cant get back into recovery. Does anyone know when a packaged root will be ready?
no clue and i know its a pain but keep trying im sure you will get it again... try a PNY card if having lots of trouble
The easiest way I used was continuously popping in and out the sdcard while it was booting into recovery.
Help
Can someone help me with getting this Inc into recovery? I have tried several times for the last couple days and keep getting this message, " * daemon not running. starting it now *". I have the adb running in loop.
Related
So ADB was working (I thought?) and ADB recognizes my phone when I just plug it in, but when I go to do the steps for rooting, it no longer recognizes it.
I got it to say offline ONCE after the loop, but the on the unplug re-plug, it went away. I'm bummed...
cmon now http://forum.xda-developers.com/showthread.php?t=703429
You must have misread my post. I've looked thoroughly through that post, actually.
What I am needing help with is after that loop, going from offline in ADB to recovery...
thanks!
Can A Mod PLease Lock this thread, thee is Multi Post in Multi threads Reading this!
The Answer you are Looking for.... UN-PLug the the USB wait 5 second if that and plug it back into the Phone..
I did that, on several different occasions, but alright, will try again. Thanks.
missxoash said:
You must have misread my post. I've looked thoroughly through that post, actually.
What I am needing help with is after that loop, going from offline in ADB to recovery...
thanks!
Click to expand...
Click to collapse
ITs not recognizing your phone when in recovery thought correct? if so thats the same thing discussed there. If it did recognize it as offline in recovery then do as eugene said.
missxoash said:
I did that, on several different occasions, but alright, will try again. Thanks.
Click to expand...
Click to collapse
it needs to stick to offline, not just say it onec or twice. itll say offline many times not just once then disappear. Once it does it and sticks, it doesnt turn off, you dont need to rush and hit ctrl c
I'm having a issue that's somewhat related. I have a tmo mts3g and I had it rooted with no issues following the instructions provided in eugene's previous posts on the matter. Tmobile recently dropped a OTA update for 2.1 and it relocked my phone. Now that I'm trying to reroot it I'm having issues getting the phone to be adb online in recovery mode. I do adb reboot recovery and when it starts I have the loop going and I have no problem getting it to say "device offline" but when I unplug the device (no matter how long I wait) and plug it back in it still remains in "offline" status under adb devices. I've heard about driver issues and all kinds of other madness but I'm using the same computer that I used when I rooted it previously. My question is; is this something tmobile might have fixed in their ota update and am I just wasting my time continuing to try this method? If not i'm more than happy to continue to try but not if it's with no point.
Thing is you did the OTA update, so instead of following the old guide, you follow the one in the rom bible in the development section. Hope that helps.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
Yeah, I found my way there eventually. I got it all straightened out and currently on Eugene's MyFroyo6 with no complaints. Thanks
someone please tell me what does ADB stand for????????
i hate myself for being such a noob but what can i do?!?!?! whats adb pleaseeee...
and why is it that everytime i go into command prompt to try and do stuff with the phone it never finds "androidsdk"
ahh!!!!!
Frenzifun said:
someone please tell me what does ADB stand for????????
i hate myself for being such a noob but what can i do?!?!?! whats adb pleaseeee...
and why is it that everytime i go into command prompt to try and do stuff with the phone it never finds "androidsdk"
ahh!!!!!
Click to expand...
Click to collapse
How about you tell everyone what you are trying to do, and what you are typing in command prompt.
Android Debug Bridge....
Do you have Samsung drivers installed/setup?
Take a nice deep breath and do one learning step at a time. Android has a lot to teach. I would also encourage learning the phone use basics, reading up on things before attempting any mods. Welcome to android family.
Here is a good thread to start in.... http://forum.xda-developers.com/showthread.php?t=790004
tats_06 said:
Android Debug Bridge....
Do you have Samsung drivers installed/setup?
Take a nice deep breath and do one learning step at a time. Android has a lot to teach. I would also encourage learning the phone use basics, reading up on things before attempting any mods. Welcome to android family.
Click to expand...
Click to collapse
lol ... well i already opened another thread about how to put hebrew fonts on the phone to support hebrew instead of seing empty boxes on facebooks and websites and what not... my phone Was rooted, Was voodooed but there was force closing on things and market stopped working so i completely stocked the phone, only thing that doesnt work now is my phone memory which is on 0.00 which i read and you apparently have to root the phone all over again
so right now... the phone memory is my only issue, i guess i can live without hebrew if its too much of a hassle to install while rooted::
http://forum.xda-developers.com/showthread.php?t=480964
i have no idea how to work this^^^
i have the drivers installed like i said, i was able to odin, root, and voodoo, clockwork as well ofcourse. now phone is completely stock except for that memory issue.
http://forum.xda-developers.com/showthread.php?t=804457&highlight=phone+memory
completely got lost in this thread... so yeah, those are my problems with the phone at the moment. i wont mention the obvious of gps etc.
another awesome issue, everytime my phone is turned off and back on, it starts that set up process all over again... language; facebook; google... etc... why?
Once you install adb on your computer you have to go to change the path on your computer to point to that folder. Or you can change your directory to the one that holds the adb file from within the command prompt. This should allow you to run the commands.
The issue you are having with the memory on your phone is because voodoo did not completely uninstall. You can fix this by running the steps in this forum to uninstall voodoo. Don't try the one step zip, you are going to have to do the three step manual method to make this work. Don't forget the final step to wipe data.
Once this is done voodoo will be gone, memory should be back, and phone should stop resetting on every boot.
Obviously you aren't the only one to ever have these issues. But you can recover.
Good luck.
Sent from my SCH-I500 using XDA App
No intro
Here is what I did:
Wanted to flash new ROM, [ROM] Super Clean DI01 + AOSP apps, (Thanks to everyone who worked on it AND everyone on this forum cause Ive spent the past week reading the threads and felt confident enough in the info and the support to try).
BUT
when trying to download with ODIN (not certain if this was the right method, too late now) found that it did not work, couldnt see file when looking in the PDA browse.
STUPIDLY disconnected phone from computer while in DOWNLOAD MODE. You know, when the screen says "DONT DISCONNECT FROM TARGET". Apparently, the rebus string for "you dun f*cked up" is a phone symbol... a yellow triangle w/!...computer symbol.
What do I do to get back to fun?
Tried reboot, tried CWR reboot, tried Nandroid restore w/reboot still the YDFU symbol
*EDIT* I continued searching while awaiting a response and found this thread: Stuck on connection warning screen. This got me out of the YDFU screen into a nice force loop. Since I am not a -complete noob- I pulled a nandroid backup outta my hat and ...tada back to good, now to the fun!
Okay lets start first I did the burritoroot following this guide http://www.youtube.com/watch?v=AZ88CYWv0FU
Then did the android market following his next video
afterwards I decided on getting getting custom recovery following his next guide
http://www.youtube.com/watch?v=JqKZLMaRSgc
Around 2:30 minutes into the video my fire was stuck on please wait for over 15 minutes.
then I stupidly did lots of stuff like disconnecting it and trying to restart it and reinstalling drivers when adb didn't work
and now it is stuck on a fastboot (it says kindle fire and stays like that) as people seem to call it. I have tried reinstalling the drivers for a while it was stuck on unknown device but now it is under android and says Android ADB interface
I have tried the kindle unbrick utility but it keeps saying device not found and also adb is not found.
I have heard of this solution http://forum.xda-developers.com/showthread.php?p=22077057 but idk where to put the commands at
any help? can I get out of this?
First thing is stop using video guides.
Go read in the hundreds of threads started daily on your very problem.
You need to understand what you are doing quit taking the easy way out.
nvm you can close this
i found out how to do the cmd had to dl a file first and now my kindle is going back to factory reset
edit: k everything working fine
asb2164 said:
First thing is stop using video guides.
Go read in the hundreds of threads started daily on your very problem.
You need to understand what you are doing quit taking the easy way out.
Click to expand...
Click to collapse
Next time although I don't plan on doing anything other than root and the market anytime soon but next time I will.
Hi all,
As mentioned in the title, an update from LG came for my 802 and suddenly, it booted and entered TWRP.
Now, it always goes back to TWRP. Anyone knows how I can solve this or boot normally again?
Thx,
Xiribi
TWRP, that's the problem.
Custom recovery and OTA will be end like this.
Easy fix here
Xenovias said:
TWRP, that's the problem.
Custom recovery and OTA will be end like this.
Easy fix here
Click to expand...
Click to collapse
Will this reset the phone?
Don't want to lose all the data
Xenovias said:
TWRP, that's the problem.
Custom recovery and OTA will be end like this.
Easy fix here
Click to expand...
Click to collapse
but when i do this fix is the ota update then installed?
Edit: the update is not installed but how do i get that update installed whit cwm or other recovery?
Xenovias said:
TWRP, that's the problem.
Custom recovery and OTA will be end like this.
Easy fix here
Click to expand...
Click to collapse
Unfortunatelly this did not solve the problem.
Keeps in a bootloop now and nothing happen.
Anyone remenbers where I can find the ADB thread to restore the phone?
When I try now I get an error that the ADB shell is is error: closed.
I'm looking for a way to put an image back on the phone.
THX guys.
Xiribi said:
Unfortunatelly this did not solve the problem.
Keeps in a bootloop now and nothing happen.
Anyone remenbers where I can find the ADB thread to restore the phone?
When I try now I get an error that the ADB shell is is error: closed.
I'm looking for a way to put an image back on the phone.
THX guys.
Click to expand...
Click to collapse
Use the terminal command if you can't use ADB... might work?
That's what I did, because AT&T stops giving you the option to not update after a couple times, and then I got stuck like you.
http://forum.xda-developers.com/showthread.php?t=2582142
please learn to search and read before doing stuff on your precious phone
FiendFyre said:
Use the terminal command if you can't use ADB... might work?
That's what I did, because AT&T stops giving you the option to not update after a couple times, and then I got stuck like you.
Click to expand...
Click to collapse
i did use the terminal and got into the boot loop.
Cannot perform any operation trough command because it gives me an error saying that the adb shell is error closed.
I'm now trying something else with some LG tools I found here. Hope it works, if it does, I'll repost the link here.
Xiribi said:
i did use the terminal and got into the boot loop.
Cannot perform any operation trough command because it gives me an error saying that the adb shell is error closed.
I'm now trying something else with some LG tools I found here. Hope it works, if it does, I'll repost the link here.
Click to expand...
Click to collapse
I'm not sure what happened for you, because the terminal command worked for me... maybe you mistyped it, or maybe you had a slightly different problem or something. Not sure.
Guys,
I finnaly managed to have my device working.
Trough ADB shell and then trough ADB I was able to copy a downloaded ROM (FLEX rom) to the device and installed it.
After a couple of hours, all is OK.
THANK YOU ALL FOR THE HELP AND INFO!!! (PS: sorry for the caps)
I cant seem to get out of TWRP. I use adb and i used "adb boot recovery" and i cant seem to get out. The issue i think i have is that the adb keeps pushing the command to the phone. Now before you say "Just unplug the phone and reboot it"... I did that. Now it seems that the code is stuck with the phone . Iv tried to put it into TWRP my self without adw and tryed to reboot it but that didnt work. No other tread helped me. If you could tell me how to how to fix this or link me to a thread somewhere else. Its a Verizon phone.
Thanks -
Subby
if it helps: I was trying to root :good:
Shubbyshak said:
I cant seem to get out of TWRP. I use adb and i used "adb boot recovery" and i cant seem to get out. The issue i think i have is that the adb keeps pushing the command to the phone. Now before you say "Just unplug the phone and reboot it"... I did that. Now it seems that the code is stuck with the phone . Iv tried to put it into TWRP my self without adw and tryed to reboot it but that didnt work. No other tread helped me. If you could tell me how to how to fix this or link me to a thread somewhere else. Its a Verizon phone.
Thanks -
Subby
if it helps: I was trying to root :good:
Click to expand...
Click to collapse
I got the phone to RAM dump boot i have no idea how i got it there. But its something else. THE PHONE IS NOT BRICKED.
So you're stuck in recovery??? If so, just flash one of the Verizon based roms that should get you going.
indoz said:
So you're stuck in recovery??? If so, just flash one of the Verizon based roms that should get you going.
Click to expand...
Click to collapse
Thanks but i got out of it. I think it was because i tried to root is so the microsd got corrupted because the rooting process screwed up
Thanks -
Shubb
Shubbyshak said:
I cant seem to get out of TWRP. I use adb and i used "adb boot recovery" and i cant seem to get out. The issue i think i have is that the adb keeps pushing the command to the phone. Now before you say "Just unplug the phone and reboot it"... I did that. Now it seems that the code is stuck with the phone . Iv tried to put it into TWRP my self without adw and tryed to reboot it but that didnt work. No other tread helped me. If you could tell me how to how to fix this or link me to a thread somewhere else. Its a Verizon phone.
Thanks -
Subby
if it helps: I was trying to root :good:
Click to expand...
Click to collapse
This happened to me. I just had to use the hardware buttons to boot into recovery then reboot from there and that got me out of the loop. Not sure why that happens.