Database Users

X1 Battery Cover - Material?

Afternoon guys n girls,
Just a quick question, can someone confirm the X1 battery cover is aluminium and not titanium etc.
Mine is scratched to hell and I wouldn't mind getting it re-anodised purple or blue providing it is alu.
Thanks

try using the wonders of physics!
go get a magnet and test it

Have tired that already, it's not magnetic so that rules out steel... just wasn't sure if titanium is magnetic or not.

google power ("titanium magnetic")

Doesn't really help though, some people said it is magnetic whilst others said it isn't... there is not a clearly defined answer.
I'd rather not try re-anodise it and get it burnt to **** and THEN find out it isn't alu.

it's definitively not titanium..... the fu.... chassis is build in cheapest plastic but the accu cover is build with titanium......häh

im pretty sure its alu. the whole phone is made of it, why spend more money ona titanium battery cover?

I don't know, I just recall Nokia using Titanium on some of the phones like the...8800?
Ah well, anodising here we come.

good luck
whatever this actualy does hehe but screens are appriciated

Well it's taken a battering so re-anodising it will put all the colour back, get rid of the horrible grey patches.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Will probably do it shiny purple:

im somehow glad now that i got the Silver version. i can barely see my scratches

achmed20 said:
im somehow glad now that i got the Silver version. i can barely see my scratches
Click to expand...
Click to collapse
I was thinking the same. Silver ftw. But on the pics it seems pretty bad handled even for a black X1.

just the battery cover. the rest seems fine.
but i must admit ... the batter cover get scratchy so freckin easy. i just wear it in my pocket or sometimes laying it on my desk. yet i got scratches on it.

i think my silver x1a is made of stainless. i had a hard time drilling thru doing the battery cover reset mod. i was using small new drill bit to drill a pilot hole and it wasnt easy. took me about 5 to 10 minutes to drill thru.

it's aluminum... otherwise, they would have bragged about using titanium in their phones..
besides, the nokia 8800 carbon is made of carbon fiber and titanium and retails for around 1000-1200 bucks.

c_legaspi said:
i think my silver x1a is made of stainless. i had a hard time drilling thru doing the battery cover reset mod. i was using small new drill bit to drill a pilot hole and it wasnt easy. took me about 5 to 10 minutes to drill thru.
Click to expand...
Click to collapse
I don't know what drills you use, but with a common HSS drill it should not take longer than 20 seconds to drill through and make a fine champfer -carbide should do the trick in half of the time.

Paitor said:
I was thinking the same. Silver ftw. But on the pics it seems pretty bad handled even for a black X1.
Click to expand...
Click to collapse
The rest of the phone is 100% fine, it's just that I always put it down on my desk / table and tend to slide it rather than picking it up and moving it so the back has taken a hammering.
Just spoken to my mate who does anodising and he said he'll beadblast it first then re-anodise it for me... mmmmm blue or purple, that is the question now.

[email protected] said:
The rest of the phone is 100% fine, it's just that I always put it down on my desk / table and tend to slide it rather than picking it up and moving it so the back has taken a hammering.
Just spoken to my mate who does anodising and he said he'll beadblast it first then re-anodise it for me... mmmmm blue or purple, that is the question now.
Click to expand...
Click to collapse
I'd prefer purple with a black phone.
Blue would be better for the silver one.

yeah thats what i thought untill i started drilling.
alluminun for sure its not. i thought so too and was thinking i would make quick work out of drilling but it didnt work out that way.
skycamefalling said:
I don't know what drills you use, but with a common HSS drill it should not take longer than 20 seconds to drill through and make a fine champfer -carbide should do the trick in half of the time.
Click to expand...
Click to collapse

[email protected] said:
Have tired that already, it's not magnetic so that rules out any form of steel... just wasn't sure if titanium is magnetic or not.
Click to expand...
Click to collapse
I must confess to total amazement here - normally, I'm extremely good-mannered ... but:
IRON (Fe) is magnetic, together with it's 3+ oxides (Fe3O4 etc)
TITANIUM is a completely different element
I just can't believe it ...

Possible to paint the battery cover like the touch pro?

Is it possible to paint the battery cover using the method described here:
http://forum.ppcgeeks.com/showthread.php?t=46487
I want to change the battery cover from the gold, on my white G1, to white.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Pretty sweet if ya ask me, I think Ill be doing the orange/yellow this sunday. My back case is messed up anyways so Ill scrub it down and give it a shot.

that picture is the reason I wanted to try it. Let me know how it goes when you do it. I would do it to my G1, but I'm trying to sell this one in order to get a new one

any updates?

Seriously I want to see what the g1 looks like painted. Back in my Nextel hacking days, I use to paint my devices, I always did a pearl with a few clear coats. I have never tried a "flat" color, it looks good though. Someone paint your phone.

Taping off the cam window woulnd't be too hard, but i'd want to keep the "with google" and keeping the speaker holes open would be a pain.. Maybe stick 9 toothpicks through from the inside?... Someone try it damnit. Haha

According to the thread at ppcgeeks, they didn't even need to take off the camera window.

ill be doing this today most likely...if not, tomorrow for sure . ..
im trying to find my extra backing...

jaboswell said:
ill be doing this today most likely...if not, tomorrow for sure . ..
im trying to find my extra backing...
Click to expand...
Click to collapse
keep us updated!

Man I want that blue soo bad, but I don't want to take apart the front casing of my phone.

still trying to find the extra backing i have...if i cant find it ill just do the one I have and hope if i screw it up tmobile gives me another...lol...running to walmart right now!

harpreet1988 said:
According to the thread at ppcgeeks, they didn't even need to take off the camera window.
Click to expand...
Click to collapse
Dude TAPE not "take". There is no possible way to not tape off the camera window and not paint over it rendering it un-usable...

mr2man07 said:
Man I want that blue soo bad, but I don't want to take apart the front casing of my phone.
Click to expand...
Click to collapse
I don't think you can paint the front casing, since it's not as rough/grippy as the back cover.

CBowley said:
Dude TAPE not "take". There is no possible way to not tape off the camera window and not paint over it rendering it un-usable...
Click to expand...
Click to collapse
....If you read the thread, the person didn't do anything to the camera window. They neither taped it off, nor took it off. Since it's really smooth, the dye has nothing to stick on.

harpreet1988 said:
I don't think you can paint the front casing, since it's not as rough/grippy as the back cover.
Click to expand...
Click to collapse
True. I want to do this but i think it would look kind of weird to have a two tone like that..

I wanted to paint my battery cover white, but I'm not sure if walmart has white dye.

im still trying to find the white back i have...got a blue dye.....
i dont think you can do dye black backs...its already the darkest color possible..unless im wrong..but thats why i realized i cant use the black back i have now.

Oooops didn't read it, assumed it was paint. I apologize.

No updates?

Anybody attempt this? Or going to soon?

Dirrty Hero needs cleaning

I'm going to sell my white Hero soon, as I have preordered a Desire.
Problem is, the white color on the front has a hint of discoloration.
How should I go about to get it white again? I thought about using cotton and acetone, but maybe it's too strong?
I have attached a pic to illustrate. You can see the darker color against the white "search & back" button.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Don't pay any attention to gabrieltit. He's been banned at least six times, and wears shirts with no sleeves.

craig0r said:
Don't pay any attention to gabrieltit. He's been banned at least six times, and wears shirts with no sleeves.
Click to expand...
Click to collapse
hehe, thanks. just by reading the first sentence I could see the where it was going.

zaphyr said:
hehe, thanks. just by reading the first sentence I could see the where it was going.
Click to expand...
Click to collapse
have a look on google for restoring old monitors and pc's im sure lifehacker has somegood guides, might help you a bit! I would use normal kichen multi purpose cleaner with a cotton swab...

zaphyr said:
I'm going to sell my white Hero soon, as I have preordered a Desire.
Problem is, the white color on the front has a hint of discoloration.
Click to expand...
Click to collapse
Is the following of any use? From the htc hero spec page:
Keep your phone dry to reduce the chances of dirt adhering to the finish. If the back of your phone gets dirty, remove the back cover in accordance with the instructions in the user manual and use a lightly dampened melamine foam eraser (aka. magic eraser) to remove any marks. After thoroughly drying the back cover, replace it on the phone.

I tried with the melamine foam eraser, but unfortunately it doesn't seem to do much... I have exactly the same issue with discolored plastic on my white Hero - it only affects the front of the phone, and not the teflon covered back cover.
If you look at the top of the phone, the contrast between the discolored front and the (still) white back cover is very visible.
What to do next (except for buying a Desire or N1)? Acetone might be too strong, but I'm just speculating on that. Maybe vinegar or a combination of vinegar and baking soda could do the trick?

I haven't tried yet. All I found in the house was my wife's nail polish remover, and that did nothing....but it smells nicer now

zaphyr said:
Photo
Click to expand...
Click to collapse
Why did you 'shop a stock image of a phone rather than just take a picture of your actual phone. Surely this would have been easier

Ive used one of these fabrics you use for clean your glasses. It removed all marks.

Change the full back and front cover? It really is easy.

One of them is a white hero and ones a grey one

andrewb84uk said:
Change the full back and front cover? It really is easy.
Click to expand...
Click to collapse
Any idea where I might get a front cover? I did a quick search for it on ebay when I bought a new back cover, but couldn't find any
EDIT
I found whole housings on ebay, they go for £30-35
But one month delivery time from Hong Kong is a long time to wait...

Just to finish this, I never managed to get the white color back. I have used fairly strong stuff, but nothing happens. Kudos to HTC for using a strong plastic material though! I think many other phones would get disfigured if I gave them the same treatment.
So, I'll just try to sell it as is, when I get the Desire in a few days.
Case closed

My Z5c has a Non-Frosted but Glossy back

I'm just curious. How come my Z5C has a glossy back, as far as I have researched on the internet, it only has 1 version with a frosted glass back.
Anyone has any idea? :s
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

yea i have it also its called a screen protector on the back.

RiTCHiE007 said:
yea i have it also its called a screen protector on the back.
Click to expand...
Click to collapse
Thanks for the reply, but mine I dont think it's a screen protector, I cant find the egdes.
For yours, was it placed there by sony or you put it there?

Its frosted, like everyone's are, period. Admins, this one deserves a lock because there's not point in have these kind of conversations again...

bubimir13 said:
Its frosted, like everyone's are, period. Admins, this one deserves a lock because there's not point in have these kind of conversations again...
Click to expand...
Click to collapse
Sorry, But I dont think this looks like frosted glass at all.

That backside doesn't look like mine for sure.

If this is an issue to you, return it to Sony or call customer service........very simple

Did you buy a secondhand phone? Seems like it was replaced

Looks like a screen protector. Can you feel the raised edges of the plastic sides or camera lens? If not it's most definitely a protector. All the replacement backs I've found have been frosted.

I admire the skill of the guy that put that screen protector (if is one).

I believe the back cover has been replaced since there is no sign of a screen protector. But what kind of manufacturer manufacts fake cover that looks nothing like the real one...

I replaced my back cover due to a scratched lens cover, which is glossy as opposed to frosted, so agree with suggestions that it could have been replaced at some point.

wazmeister05 said:
I replaced my back cover due to a scratched lens cover, which is glossy as opposed to frosted, so agree with suggestions that it could have been replaced at some point.
Click to expand...
Click to collapse
Do you have a link to one? I would love a glossy back.

civicsr2cool said:
Do you have a link to one? I would love a glossy back.
Click to expand...
Click to collapse
Sure thing! I'll PM you the link and you can post it if anyone else asks? Having been on XDA for 5 years, I've never actually posted anything so the 10 comment limit still applies

wazmeister05 said:
Sure thing! I'll PM you the link and you can post it if anyone else asks? Having been on XDA for 5 years, I've never actually posted anything so the 10 comment limit still applies
Click to expand...
Click to collapse
https://www.replacebase.co.uk/catalogsearch/result/?cat=0&q=Z5+compact
I tried to order one but they don't ship outside the UK. Maybe I was wrong in assuming they were all frosted simply because they look like it in the stock photos they use to sell it! Are these glass or plastic?

civicsr2cool said:
I tried to order one but they don't ship outside the UK. Maybe I was wrong in assuming they were all frosted simply because they look like it in the stock photos they use to sell it! Are these glass or plastic?
Click to expand...
Click to collapse
Ah, sorry didn't realise they were mainland UK only.
I actually had no idea it would be glossy until it arrived - it was a quick purchase so I could replace the plastic camera cover and get back to taking pictures without lens flare. To be fair though, all reviews etc. I've read all talk about the frosted glass back so I'm pretty certain on closer inspection that it is plastic.
Not a deal breaker personally, I imagine it won't shatter as easily and I have put a vinyl cover on it anyway. Came with adhesive already on it too which seems to be a bonus looking elsewhere, though I'm not convinced the waterproofing will be guaranteed with it any more. But Im not in a hurry to test that...

Finally got my glossy back in the mail and figured I'd follow up with y'all. Someone may gain knowledge from it.
Purchased from here:
http://www.ebay.com/itm/281997857206?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT
It is a bit of a weird white compared to the frosted back but similar to the front.
It's glass, and extremely fragile. I cracked it taking it out of the packaging. It's probably as fragile as an egg shell. I'm still on the hunt for another to strip to clear and expose the electronics. If y'all know of any plastic ones let me know.

Screen glass pushed out of body

As the title say. The glue on my LG G2 screen has peeled of the body. Any way to glue it back or fix it any other way?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Bumpish. Anyone know what kind of glue I need to use or how I can fix it?

bl00keRs said:
Bumpish. Anyone know what kind of glue I need to use or how I can fix it?
Click to expand...
Click to collapse
A quick google search shows the best option. https://www.ifixit.com/Answers/View...dhesive+or+glue+can+I+use+for+the+lcd+&+glass

Actually it is battery with back cover pushing the screen out. Probably too thick new battery inside that phone. Is there any point gluying it back then?

bl00keRs said:
Actually it is battery with back cover pushing the screen out. Probably too thick new battery inside that phone. Is there any point gluying it back then?
Click to expand...
Click to collapse
I really don't know. Go to iFixit and look how they dissasemble the G2. Maybe there's a trick. Also they have a repair-forum.
https://www.ifixit.com/Device/LG_G2

that happend to my device too . it was my new battery . It was a third party battery

Zero_Rik said:
that happend to my device too . it was my new battery . It was a third party battery
Click to expand...
Click to collapse
You repaired your glass in any way?

bl00keRs said:
You repaired your glass in any way?
Click to expand...
Click to collapse
Nope, after i tested something i saw that it dont made a difference if i take original or third party . On both batterys the diplay getting pressed out. I tryed glue stripes for phones bjt dont work . So i have my phone without back cover into a secure case

Did you disassemble the glass of digitizer to use these stripes? I ordered a kit on eBay; an UV lamp, LOCA glue and some hypodermic syringe to try put a little bit of glue under the glass. Maybe it gonna work that way. Which battery you talking about?

bl00keRs said:
Did you disassemble the glass of digitizer to use these stripes? I ordered a kit on eBay; an UV lamp, LOCA glue and some hypodermic syringe to try put a little bit of glue under the glass. Maybe it gonna work that way. Which battery you talking about?
Click to expand...
Click to collapse
jep, i heated the digitizer and with a little line i cutted it off . After that i layed the glue stripes on the screen end sites and put it back into frame .
thats the battery :
https://www.amazon.de/cellePhone-Po...TF8&qid=1494445075&sr=1-2&keywords=LG+G2+akku

Dude, this is the same battery...

Hi again! Thank you for helping so far.
I'd like to disassemble original glass with a heater and put some new LOCA glue. Do I need to clean glass/lcd after disassembling it? I mean old glue must be completely off, huh?
I bought LOCA glue and a UV lamp from eBay. Is that lamp any good ? I just got it but seen some movie about applying LOCA glue and they got much bigger and probably much better UV lamp than mine and wondering if mine will be fine though?

Tried to do it yesterday but failed. I think the glass was still attached to the LCD and it was some glue holding it to the frame. Anyway, screen is partially broken now and I'm wondering if I should just buy a new one and replace it or just go for OnePlus 3T or 5.