Related
Hey guys,
I want to know what is possible with our USB-Connector.
What does it support/not support? (Host-Controller, driver...)
How is it build up? (beside the specs in the Wiki)
I'm happy with all helpful answers!
greetz
playdo
usb
It's a mini ext USB and dispite the bumff from HTC will work with any ext mini USB device.
My friends got a USB charger for his car , this works fab in our phones.. have a look in teh interweb , as long as it's gto our connecter it will work .. ( however there are some issues with poliarity as some of the pins are set up diffrently ..
I searched the internet about this topic (because forum search seems to be a bit crappy )
So I found a thread about USB-Host in Touch HD.
Now my question:
Is there a possibility to use the Touch HD as USB-Host device or is our Touch HD just a pure Client?
I thought about a mouse or external Harddisk. But if there is no Host-Controller, it's impossible
PS: I just found some thread about this topic (search funtion is weird finds "usb host" but nothing with "usb")
So from what I see, there is no host capability with our Touch HD?
Nobody tried Zeno driver?
There is an old 3D about HD USBHost: you could search.
HD has Host capability by chip but extUSB lacks of output power: serch 3D to confirm that
D'rath
Many thanks D'rath, that mainly what i want to hear
I think it's possible to bypass the lack of power by an Y-Cable or something like that. If not, i'm going to solder it together
Lets hope it works
I tried it
But I got bad news so far
Just soldered a USB cable together, so power supply is provided and I installed Zeno USB Host Drivers to get mouse support.
But it didn't worked
Just got the popup with "New USB Mouse" but nothing more.
Maybe there is some hope, that it will work, but I didn't get it to work.
greetz
playdo
playdo said:
I tried it
But I got bad news so far
Just soldered a USB cable together, so power supply is provided and I installed Zeno USB Host Drivers to get mouse support.
But it didn't worked
Just got the popup with "New USB Mouse" but nothing more.
Maybe there is some hope, that it will work, but I didn't get it to work.
greetz
playdo
Click to expand...
Click to collapse
Did you try using a flashdrive and see if it gets recognized ? I'll be interested in that.
I have just flashed a new ROM and I'm experimenting a bit.
But i try to test it in the next days, if I find the time
By the way, my car is rusting and i got little time because I gotta repair all the **** >.<
i use my laptop to charge my phone and i also do this at work, i realise i can just plug in the usb wall charger but ideally what i want is the ability to plug in the the usb into laptop / pc and get the
Choose a connection type
1) activesync
2) harddrive
3) internet sharing
4) just charge
any ideas?
Just select either activesync or disk drive, and then press the power button to turn it back off...
when the connection screen pops up just click activsync and check the little square box " Don't Ask Again" and it won't pop up anymore
SEE SCREENSHOT
i want to use the phone ... its the only thing that keeps me sane at work lol
You dont have to select an option. When the menu comes up 'activesync, hard drive, internet sharing', , , just press the home button and the menu goes away, the phone charges.
You could of course just choose activesync, it wont affect anything if there is no partnership set up on the laptop.
if i click dont ask again doesnt it just set my selection as the default selection?
if you press home it still does what was last selected (such as harddrive) my problem is i use it at work where it will freak out if harddrive is found or it activesync is attempted to connect
larrytango said:
if i click dont ask again doesnt it just set my selection as the default selection?
Click to expand...
Click to collapse
No, the popup won't appear anymore and remember that setting.
There's no "do nothing". So get your USB charger out
kilrah said:
No, the popup won't appear anymore and remember that setting.
There's no "do nothing". So get your USB charger out
Click to expand...
Click to collapse
i realise no option exists im hoping someone has a way to do it??? any ideas
I'm not sure i understand the problem, are you saying your works computer will recognise it as a storage device and 'freak out'? Because it won't, it will happily ignore it.
samsamuel said:
I'm not sure i understand the problem, are you saying your works computer will recognise it as a storage device and 'freak out'? Because it won't, it will happily ignore it.
Click to expand...
Click to collapse
i work in a banking environment and amazingly they're not too happy about people with unauthorised phones lol, if u plug in my charger to the usb port it will either select it as harddrive in which case loads of nice messages appear and people are alerted (manager once plugged a usb drive into my pc forgetting that i didnt have the correct permissions and this happened) and if selected activesync the software (which is installed and i dont have permissions to stop it) would kick start and i expect cause similar results
on my old phone (ignito / diamond 2) i used an old usb cable i had that was damaged and data lines where broke and thus it just charged - i guess i could do that i just was wondering is a software tweak existed.
ahhhh gotcha. Wasn't thinking hard enough. heh.
Looks like your only option is taking the charger to work with you. (I have several 3 pin chargers that have no cable, just a USB slot made by Garmin that i have positioned around the house, and at work, , saves dragging the charger itself about, just need the cable.)
hi guys,
i have searched the forums for wm 6.5 ROM, but lots of them are still in beta phase,have bugs or slow.
can anyone give link to a stable WM 6.5 ROM for my xda orbit
Thanks in advance
...
6.5
Babbelut ROM WM6.5-28005 v0.3 NLD/WWE
*spb mobile shell is great, he is currently developing beta rom
http://www.sendspace.com/file/97d3p7 (download link for v.3)
http://www.megaupload.com/?d=ZTXWO4D7 (download link for v.Beta)
Downloading it now, will check it later on. THX
Was about to create topic but found this and hopefully will try this and hope it works on my XDA Orbit 2. I brought it off Cex from Aylesbury and it needs some love and update as i have Windows Mobile 6.1 (eeurrgh) and brought it off cos i thought i can upgrade to Winodws Mobile so i hope these works well for me.
Any introductions of doing that?
Thanks in advance.
First link didnt work. The XDA tried to block it by restarting it themselves. Tried third time. And unlucky.
Second Link. How can i use NBH file for my XDA?
...
Wrong place dude..
this is for xda orbit 1/artemis..
your looking for xda orbit 2/ poloris..
you need to be here..
Rn
Hi all I'm new here. My phone "O2 XDA Orbit" behaving strangely. Suddenly the sound disappeared and I can not hear phone calls directly into the phone, and any other person hears me not(microphone off), and not just one click sound on the screen. If I restart the phone with USB cable inserted into the phone and computer (on), then the sound occurs again(but not in original style, sound occur in to the back speaker not in front ), and phone function almost normally with microphone (on)>>> until the next reboot when sound disappear again and microphone is off. I mention that;.... connection the phone to the computer can not be achieved in any of this cases. The error code (USB connection) connection on my computer is {Code 10(One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it)} who can not recognize the new hardware. In your opinion of specialists in this field what would be done? I think something happens to the ROM which gives errors of hardware power. The sound occurs when I insert into the phone power charger connector and disappears when the power supply plug out ... Please if you can help me with some guidance what I have to do one upgrade of ROM or something? Specification of the phone is:
[*]IPL-3.04.0001
[*]SPL - 3.04.000
[*]OS - 3.4.0.0
[*]CPU - OMAP850
[*]Speed 201Mhz
[*]RAM 64Mb
[*]Flash 128Mb
[*]Data bus 16bits
[*]ROM 3.4.206.2WWE
[*]ROM date 4/18/07
[*]RADIO Vers. 02.67.90
[*]PROTOCOL Vers. 4.1.13.28
[*]EXT. ROM.Vers 3.4.206.101
[*]MODEL of phone -ARTE200
[*]Platform - PocketPC
Funny ...!!! Today I put the phone to the charger and after I removed the plug from the power supply, the sound has returned, but the USB connection to a PC still can not set ...! What should I do? A new version of Windows can install on my phone; without connecting the USB cable to the phone(ex.-of my card micro SD)??
Adryum said:
Funny ...!!! Today I put the phone to the charger and after I removed the plug from the power supply, the sound has returned, but the USB connection to a PC still can not set ...! What should I do? A new version of Windows can install on my phone; without connecting the USB cable to the phone(ex.-of my card micro SD)??
Click to expand...
Click to collapse
have you got activesync or windows mobile device centre installed on the pc?
if yes..
i suggest you buy a new usb cable.
i have this problem with a couple of cables.
"USB DEVICE NOT RECOGNISED"
but when i change to a differant cable, everything is ok.
flashing via micro sd - upgrading windows.
have you done uspl 1.11.cmon?
Thanks for your attention Raving in the first place ...! Data cable has no damage that I checked the same cable with my photo camera and it works normally with PC and I have two more data cables and the problem is the same. It seems weird that the phone do some work once, ...once not. It starts when he wants the sound, and can not find any explanation ... In contrast with the USB connection can not establish anything, something happens to the sound module and USB ...PC see's something, but it's not sure what it is, and says he can not establish connection with the new hardware and it gives me error "CODE 10". in Universal Serial Bus Controller and the Active Sync is instaled on my PC but he don't say a word about this connection...I don't know on what to do...! I must mention that this oddity occurred only three days go and without them I do something wrong ... He grabbed him crazy after a normal operation for a year and a half, because we had no problems with it until now ... I used as a GPS and the phone and I was really pleased with him. By the way, what they mean uspl 1.11.cmon? All data of my phone are in the first post.The phone it was once unlocked by someone else, and now I can use any SIM card from any GSM provider..............I forgot to say that I've rebooted 2 times in general mode and now works but without USB connection sound when he wants it or not................But I think she has lost some registry ...!!!
click 1.11.cmon in my signature.
this will divert you to a tutorial thread.
when you can connect your device to your pc successfully, you should do the uspl 1.11.cmon but not for now. do not try and flash a rom yet either, you will break your device. (thats what uspl 1.11.cmon is for)
id like you to just try the "hard reset".
back up all your data first.
bookmark the page as ill be updating it regularly.
personaly i think its your usb cable, eg:
one of my cables works with a micro sd reader but not my for my device, i understand your cable worked but now does not.. however thats what happened to me.
Sound engages when he wants and where he wants. If I restart the phone, sound disappears and microphone stop; and I can not talking on the phone. Enter data cable from PC to phone, and give the phone restart. Once the phone is starts, sound appear but only in back. When talking on the phone sound very loud and sounds of the touchscreen controls can not disconnect the rear speaker who remains engaged and does not want to disengage it from the normal operating mode. Another job here would be that when inserted in the charger cable, the sound is right: each speaker and microphone or operational. If I remove the plug (charger) of phone then the phone function normally just like before, but without USB connection. If I plug "USB cable data" on the phone, to the desktop I see message "One of the USB devices attached to this computer has malfunctioned, and Windows does Not Recognize it. USB Device not recognized." If I unplug USB cable from phone the sound disappears, and what I have to do is to start over again.......!!!!!!!!!
I tested all data cables, and are ok. The problem is hard. The hardware has a technical failure which somehow blocks the data on USB. Battery power consumption is higher and the battery is discharged rather quickly than it was before the cage. At night when I charge the battery full, morning at 10:00 is only 30/40% of capacity. But what is even stranger is that: when I connect phone to PC, in device manager shows me the new hardware (Mobile Device) but after a few seconds there appear a connection error code (CODE 10) that is the hardware can not start. Active sync has not started when the fault occurred..... In your opinion what should be done in this case? ... Should contact a service or ... in any way I can test something before others get the screwdriver into my phone?
sabih00 said:
hi guys,
i have searched the forums for wm 6.5 ROM, but lots of them are still in beta phase,have bugs or slow.
can anyone give link to a stable WM 6.5 ROM for my xda orbit
Thanks in advance
Click to expand...
Click to collapse
Thanks, i will test...
The connection was made the first attempt. After a week of "digging" through all possible places I noticed that the connection was obstructed by the firewall.PFFFFFFFF ..... Finally found! The FIRE WALL(on PC) settings to be set: ADD PORT------ "Outbound UDP ----5679" -on exceptions tab....See this:http://www.microsoft.com/windowsphone/en-us/howto/wp6/sync/activesync-troubleshooting.aspx?WT.mc_id=FWLink
TKX Raving U're the best...
...
Adryum said:
PFFFFFFFF .....FIRE WALL
Click to expand...
Click to collapse
lol, i didnt think about the fire wall being the problem.. typical that it was something that simple.lol although it did sound like a dodgy usb cable..
thats something ill remember
have a good new year dude!
guys i am having a problem....whenever i try to install any ROM i get error 224 device not responding......my htc is connected through activesync.....what can be the issue...i am using windows 7.
..
raving_nanza said:
ERROR [224] : DEVICE NOT RESPONDING
check the ActiveSync connection and run RUU again. if problem continues, uninstall active sync and re-install.
Click to expand...
Click to collapse
1. unplug device
2. re-connect device to pc
3. wait for active sync/wmdc to connect
4. run ruu
5. if error continues unplug device
6. uninstall active sync/wmdc
7. re-install active sync/wmdc
8. restart pc
9. go to step 1.
Rn
quertz?
Hi raving nanza,
you did a great work with BAB v03.
It works great. sometime the touchpanel reacts slow but good.
But i can't change my touch keyboard from qwerty into qwertz.
HKEY_LOKAL_MACHINE\System\CurrentControlSet\Control\Keyboard Layout\"Active" is "00000407"
Thats the German code - but still having Qwerty?
HKEY_LOKAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD\"TaskManVKey" is "0x23"
HKEY_CURRENT_USER\keyboard layout\Preload\1\"default" is "000000407"
What to do?
...
che.bike said:
Hi raving nanza,
you did a great work with BAB v03.
It works great. sometime the touchpanel reacts slow but good.
Click to expand...
Click to collapse
thats Babbeluts rom, not mine!
i merely suggest it to the other users
ill look into your qwerty to qwertz keyboard, when i find out ill post it here and ill update the tips&tricks thread
Rn
Hello,
anybody else got a problem with TV OUT ?
I cannot make it work. And when entering the Service/Test Mode, it won't work there either! Its setting is OFF.
In comManager its all greyed out, no matter if connected with a cable to a tv or not.
There is a reg setting about it and when I enable it there, it shows enabled, but it actually is NOT.
So I am wondering if this is perhaps MY hardware or if there is any 'secret' to it, to make it work.
Thanks!
Everybody's elses TV OUT working fine???
Hey what is this, no replies at all. Should I believe EVERYBODIES TV OUT is working fine?
Or nobody using that at all? I want to know if with all you out there, the TVout in connection manager is greyed out or not (with or without a plug).
Even in service/test mode my setting is OFF and cannot be changed.
Need to know if this is just mine and the hardware is perhaps broken. Thanks!
Mine works.
(I used it very rarely but it's good to know it there)
MS Direct Push not working either?!?!
Good to know at least somebody's works! If you go to connection manager, the TV screen is greyed out on mine, on yours its yellow?
And what about the square where you put the ckeckmark, its greyed on mine, on yours not?
Now, what is your software version?
Thanks
michaelthemage said:
Good to know at least somebody's works! If you go to connection manager, the TV screen is greyed out on mine, on yours its yellow?
And what about the square where you put the ckeckmark, its greyed on mine, on yours not?
Now, what is your software version?
Thanks
Click to expand...
Click to collapse
When the cable is not connected, the TV out checkbox in Connection Manager is greyed out. The moment I connect the cable to both phone and TV, a menu pops up and shows a picture and two aspect ratio options to choose from.
Are you sure it's not the cable or the input on the TV faulty? I mean it is clear for me the TV out option is available only after a connection between phone and a valid input of a working TV has been established. Dunno, try other tv sets?
My phone software is plain 6.5.3 generic UK. only mods are sd card fix and overclocking, so very little to do with the matter we are discussing.
Yeah, I tried different TVs. But since it won't even work in TestMenu, I figure it my hardware now.
You see, in testmenu, one does not even need to connect a TV because it will be displayed on the lcd. And no cable needed either.
What is your manufacture date? Its inside battery compartment on white sticker, like 09Wxx or 10Wxx.
Mine says 09W48
michaelthemage said:
Yeah, I tried different TVs. But since it won't even work in TestMenu, I figure it my hardware now.
You see, in testmenu, one does not even need to connect a TV because it will be displayed on the lcd. And no cable needed either.
What is your manufacture date? Its inside battery compartment on white sticker, like 09Wxx or 10Wxx.
Click to expand...
Click to collapse
I'm too facing the same problem..
It identifies the cable as a headset.
Anything to do...?
vignesh8910 said:
I'm too facing the same problem..
It identifies the cable as a headset.
Anything to do...?
Click to expand...
Click to collapse
1. plug your TV OUT cable into your tv
2. plug your TV OUT cable (jack 3.5 mm interface) into your x2
it seems work to me
(sorry for my bad english)
I'm a noob, not sure where else to get help on this site about my problem... I'm using a ASUS Notebook K53E Series laptop computer running Windows 7 Home Premium 64-bit Service Pack 1... I'm using a HDMI to project onto a HD TV I have a USB keyboard and mouse hooked up, both Logitech... The problem I'm having is, both the mouse and keyboard keep disconnecting on me... The mouse will go first' I'll move it from one USB port to the other, and it will work, but then stop working again... The keyboard will just stop working, even if I move it I can't get it to reconnect... I have to shutdown my computer to get everything to start working again, but it will only last about a half hour before they stop working again after the reboot... I've went into the device manager, under Universal Serial Bus controllers > Generic USB Hub > properties > Power Management, and unchecked "Allow the computer to turn off this device to save power... This does not help... I then uninstalled it, and rebooted my computer, still doesn't help... I then tried to system restore, I couldn't because I had no restore points, I have no idea why I didn't... I then look if there was any system updates, there was, but minor updates, I updated them anyways, still no go... I'm only having problems with the USB mouse and keyboard... My laptop touch pad and everything else works fine...:fingers-crossed:
... why are you looking for help here? This isn't a tech support forum, it's a dev&hacking forum. It's also not a Win7 forum... there are better places on the Internet to ask for Win7 support! Asus themselves would be a more logical choice, for example.
You could try checking the Event Logs for any abnormal USB events, but I don't really know. Are there any other mice / keyboards you could try, or could you try the ones you have on another computer? Does it work at all to just unplug the mouse/keyboard and plug it in again? Do the devices lose power (lights go out) or do they simply stop responding correctly? Do other USB devices (phone, camera, webcam, headset, flashdrive, whatever) keep on working if you leave them plugged in for a while?
GoodDayToDie said:
... why are you looking for help here? This isn't a tech support forum, it's a dev&hacking forum. It's also not a Win7 forum... there are better places on the Internet to ask for Win7 support! Asus themselves would be a more logical choice, for example.
You could try checking the Event Logs for any abnormal USB events, but I don't really know. Are there any other mice / keyboards you could try, or could you try the ones you have on another computer? Does it work at all to just unplug the mouse/keyboard and plug it in again? Do the devices lose power (lights go out) or do they simply stop responding correctly? Do other USB devices (phone, camera, webcam, headset, flashdrive, whatever) keep on working if you leave them plugged in for a while?
Click to expand...
Click to collapse
Sorry, like I said I'm a noob... The reason I asked here, because I thought it was a general question for windows OS... I do understand its windows 8 tho... I also didn't want to join some random site to get my answer... I also checked event logs, but I'm not sure how to use it... I have no other computers or mice/ keyboards to test with... The lights stay on, like their still connected, but they don't work... I've pulled them out, and plugged them back in, and even put them in other USB ports... But they will only work for a short while after moving them to a new USB port... They will no longer work in the same port after they stop working until I reboot... I'm also not sure if it's ASUS or Logitech thats the problem...