(Very) random sound problem. - Hero, G2 Touch General

Hey guys, not too sure if this is just my own problem or a general Hero/custom rom problem but Googling and searching has found nothing but the Alarm volume problem..
Basically, on all custom roms I have tried baring any 1.5 roms, it seems after I have made/received a call the phone wont output any sound at all or use the mic. An example of this is I get a call, it goes fine. Ringtone plays, can hear the other person perfectly and they can hear me. I hang up and about 20 minutes later I have a missed call as it never rang. I ring back and hear no dial tones but get the little vibration to notify me they have picked up. From there they cant hear me talk and cant hear them talk. :s
The camera, wifi, 3G, etc etc all still work but there is no sound going in or coming out of the phone.
It also seems to happen if I have a low battery. As to why this is happening, again I have no idea.
I thought i'd ask here as it seems the best place to ask.
Dave.

Related

Updated and bluetooth problems, anyone else????

Okay im really really pissed and happy at the same time, I updated my phone with the new sprint rom, and like the new features and speed, but im experiencing the same bluetooth problems I had before with the 2.17 rom. And its gotten alil worse. Heres the Problem: Connect and pairs up with my handsfree(uconnect) in vehicle fine, but there is no sound whatsoever on both ends, I cant hear callers, or even the ring, nor can the other callers hear me, its completely dead. Then it gets worse, I unpair, turnoff bluetooth and two things happen 1.) phone stays silent on every setting, no sliding sounds, no screen tap sounds, try to make phone call, and it is silent cant hear ring, cant hear callers, nor can callers hear me. 2.)When bluetooth turns off, the phone automatically restarts on its own. What can be causing these problems??

wing having problems with muting

ok so yesterday and today it did this..
ill be having a txt convo with a friend, and think it ends. its because the phone goes into mute,
as in no sound and no vibrate, i of course check the slide which reads at full on both, checked in the events/calender and there is nothing listed.
the only way to get sounds back from the speaker are a restart, phone will work just doesnt ring, but i can hear the person talk on the other end, wmp doesnt play sounds out the speaker either...
this is 2 times in 2 days, around the same time also.
any ideas what it is guys..
im running stock, with no overclock..
bump................
yea same thing happens to me i need to know how to fix

Sound problems - only vibration, no alarm, no conversation but ringtone?

Hello everyone, my Hermes worked a looong time very fine but now i cant hear the normal "beep" when i adjust the volume. Also i hear no conversation when i phone somebody. Alarm sound is off too. I hardresetted it once but it didn't help. The weird thing is: I can hear the ringing sound when i get a phone call?!
It looks like the other person can't hear me either, thats a bit weird because i thought this isnt a speaker but a microphone problem... Two components crashed on one day? WTF? Need help
I have seen this problem with a different htc phone.
their may be a bit of dirt across the miniusb contacts making the phone think it is connected to a headset.
plugin a mini usb cable and waggle it round a bit then test calling someone hopefully that should cure it for you.
I have a very very similar problem with my Vario II. The sound is VERY intermittent. Sometimes it rings but when I pickup there is no sound either way, from the earpiece or mic, the other person cannot hear me. Most of the time the phone just vibrates (set to Ring and Vibrate) so I know there is a message or a call coming...not that I can answer the call. Tried soft resetting it and even changing the ROM, only works for about 5 minutes then the sound is gone again.
The device only works as a phone with a blue tooth headset, the rest of the time it is just a PDA....that vibrates.

No soundd of incoming call or sms

Hi there everyone.
I am a new user of an HTC Hero.
I have a problem on incoming calls or sms.
I leave the HTC to lock by itself and, when i have an incoming call or sms, only the screen turns on. I can see the number of the dialer who is calling me on the screen but NO ringtone sounds from the phone. The same problem occurs when an sms is received. No ring is sounded by the phone.
I have checked everything concerning the sound preferences and (i believe) that i have not left anything un-touched.
Can anyone please "save" me from madness???
Thanks in advance!
I can't say for sure this is what happened, but humor me for a second and check a few things:
Of course double check that your volume is all the way up.
When you use the volume rocker on the side of the phone, does it beep?
Do you have any music on it? If so, play it without the headphones plugged in. Do you hear the music?
When you turn speakerphone on during a call, do you hear the other person?
Do you hear any of these sounds using headphones? Do you hear people through the earpiece on a call?
If you don't hear any sound from any of the first few bullets, but you do hear things through the headphones and earpiece, it may be the speaker in the back that's broken. Again, this is just one possible cause, but I had it happen to me. I have no idea how to fix it other than to send it back to HTC or attempt to replace it yourself (I don't know how to do this and would not recommend it if you're not comfortable with it!). Thankfully, my phone fixed itself after a few days (well, with a little help, I accidentally dropped it on the floor from a height of about four feet, but again, I wouldn't recommend that!). Anyway, just a thought, hope it at least helps you diagnose the problem.

No sound on phone calls after leaving it on vibrate for a while?!

Since I mute my ringer while in class, I've noticed this a BUNCH of times since I got my G2 and it's beginning to get on my nerves. On mute it might work fine (I can't remember), but I know after I leave my classes I'll try to make a call and it connects (green screen!) and I still can't hear a darn thing.
In fact, the people on the other end hear nothing when they answer the phone either.
Only a restart fixes the issue Anyone else have that problem?

Categories

Resources