Related
hi
i need help to customize my rom by adding few programs as default, like icontact, pointui, etc which i use routinely
i have tested few available roms, which all are wonderful, i was hoping if i can add and delete few programs from it. i am able to dump the rom and make few registry tweaks using available 6.1 kitchens.
i am still trying to delete few applications from dump folder and add new cab files.. i need someone to point me in the right direction,
thanking in anticipation
Check out the PPCKitchen, it's very easy to use! You can build your own ROM from scratch, give it a try.
ok sure i will check it out, didn't heard of this kitchen before, will it work for my himalaya also
Jirrah...if you are cooking for Htc Himalaya...try out my Kitchen (its in my signature)..
yes ather i have tried your kitchen and infact using your dark rom, amazing work, but in your kitchen when we dump the nbf file, there are lot of dll folders and files, which confuses me and i cant understand where and how to add new cab files. i read about oem packages, but how to put with your kitchen, cant understand...
what about this ppckitchen and tofclock kitchen, are these for himalaya also.
however ather kitchen is very userfriendly for a noob like me
maybe if you can point me in right direction....
thanks
Well..its very easy once u get the hang of it
After you dump it...u will have lots of folder..to make them into OEM and SYS you will need Package tool by Bepe..but remember not all ROMs work with this tool
as far the OEM pacages are concerned..its a lil bit hard..first download the required OEM then extract it in a seperate folder...then delete the option.xml from it..then copy the files,shortcuts,RGU's,DSM's and paste them into the dump folder..dnt touch the initflashfiles.txt file yet !
when you reach the step where you get the prompt to edit the initflashfiles open that OEM's and copy the lines form it and paste it in the prompted initflashfile and then save it
MAKE SURE YOU REMOVE THE TWO BYTES FROM IT AFTER SAVING IT...ELSE ROM WILL NOT START
to remove those two extra bytes..open the initflashfile(the prompted one ) with any hex editor and remove the First two bytes named FF and FE by pressing the "Delete" Button and then save it and then FLash...
Im here if u need any help
Enjoy Cooking !!
[nevermind..good luck, anyway..]
ather90 said:
Well..its very easy once u get the hang of it
After you dump it...u will have lots of folder..to make them into OEM and SYS you will need Package tool by Bepe..but remember not all ROMs work with this tool
as far the OEM pacages are concerned..its a lil bit hard..first download the required OEM then extract it in a seperate folder...then delete the option.xml from it..then copy the files,shortcuts,RGU's,DSM's and paste them into the dump folder..dnt touch the initflashfiles.txt file yet !
when you reach the step where you get the prompt to edit the initflashfiles open that OEM's and copy the lines form it and paste it in the prompted initflashfile and then save it
MAKE SURE YOU REMOVE THE TWO BYTES FROM IT AFTER SAVING IT...ELSE ROM WILL NOT START
to remove those two extra bytes..open the initflashfile(the prompted one ) with any hex editor and remove the First two bytes named FF and FE by pressing the "Delete" Button and then save it and then FLash...
Im here if u need any help
Enjoy Cooking !!
Click to expand...
Click to collapse
thanks for this start.. but i tried the packag tool, its seems it doesn't work with your dark or other 6.1 roms...;(
does the hypercore kitchen wrk for the himalaya?
as far as i know.it doesent.but i think it could be done with a lots of modifications
thanks for this start.. but i tried the packag tool, its seems it doesn't work with your dark or other 6.1 roms...;(
Click to expand...
Click to collapse
Why do u need the OEM and SYS folders..are you porting a XIP or something ?
searching the forum it seemed to me that oem and sys folders are essential for custom development...is there any other way??
for starter i would like to add e.g icontact in rom, it is available as cab, so how do i add in dump folder and then compile . if i convert it ot oem package then how that can be added to dump folder...
also what should be the error fail size or maximum size of the rom
thanks
New to rom cooking & need an answer for a couple of questions from an expert:
1. What do the folders with dll inside the SYS folder do?: how to know which folders stands for which program or function.
2. What does OEM folder do in original rom & why not present in cooked ones.
3. What does XIP folder do?
of course i would love an advanced cooking tutorial if possible
the present cooking tutorials are basic and usually they donot work that easy in action. seems like there is yet a lot to learn
Thanks in advance
I hope i can help u learn how to cook rom and makes it more easier!
1.Structure OF THE KITCHEN
ROOT OF THE KITCHEN-------
dump----> This will contan files dumped from ROM,like OFFICIAL ROMS.
OEM---->This folder contans all the OEM DRIVERS and OEM software
ROM\XIP\ ---->contain boot.rgu,don't mod or del it!
SYS -------->SYS of WM build
SYSNEW ------>TH SYS OF NEW version of WM building u will proting
temp ----->temp files,and ROM files u cooked are here
TOOLS --------->All tools that ness for cooking
XIPNEW ------>NEW XIP of WM version.there are two styles:XIP.BIN and MSXIPKernel.u can porting them by choose correct method in my bat command
reg&iniflashfiles_tools ------->Tools to edit reg files and initflashfiles.
HOW TO：
1、IF u don't want to Porting new version of wm and u just want to mod ,u can dump OFFICIAL rom.
TO DO：Place official ROM in root of kitchen，run "dump ROM.bat" and follow the instruction.when finished,u will find OEM AND SYS in DUMP\DUMP.Move them to root of the kitchen.and move xip.bin in dump to root of kitchen and rename it to xip_out.bin.Now,u can edit softwares in OEM and build as u like by run"Build ROM.bat"
2、IF u want to cook new version of WM build,just down load new SYS AND XIP file form somewhere like DFT.usually,u may only need these parts:COMM，COMM_0409,WVGA_COMM,WVGA_COMM_0409 and XIP.
UNZIP COMM，COMM_0409,WVGA_COMM,WVGA_COMM_0409 to SYSNEW folder,UNzip MSXIPKernel form XIP to XIPNEW folder then run"Build ROM.bat" and follow the guid.
sorry for my english...
hope u can understand...
-------------------------------------------------
sorry for my mistake..
i forget something important
just creat ROM\XIP\ folder in root of kitchen and put this boot.rgu in it
View attachment boot.rgu.zip
Download:TG01_ROM_KITCHEN.rar
ffboy2009 said:
I hope i can help u learn how to cook rom and makes it more easier!
1.Structure OF THE KITCHEN
ROOT OF THE KITCHEN-------
dump----> This will contan files dumped from ROM,like OFFICIAL ROMS.
OEM---->This folder contans all the OEM DRIVERS and OEM software
ROM\XIP\ ---->contain boot.rgu,don't mod or del it!
SYS -------->SYS of WM build
SYSNEW ------>TH SYS OF NEW version of WM building u will proting
temp ----->temp files,and ROM files u cooked are here
TOOLS --------->All tools that ness for cooking
XIPNEW ------>NEW XIP of WM version.there are two styles:XIP.BIN and MSXIPKernel.u can porting them by choose correct method in my bat command
reg&iniflashfiles_tools ------->Tools to edit reg files and initflashfiles.
HOW TO：
1、IF u don't want to Porting new version of wm and u just want to mod ,u can dump OFFICIAL rom.
TO DO：Place official ROM in root of kitchen，run "dump ROM.bat" and follow the instruction.when finished,u will find OEM AND SYS in DUMP\DUMP.Move them to root of the kitchen.and move xip.bin in dump to root of kitchen and rename it to xip_out.bin.Now,u can edit softwares in OEM and build as u like by run"Build ROM.bat"
2、IF u want to cook new version of WM build,just down load new SYS AND XIP file form somewhere like DFT.usually,u may only need these parts:COMM，COMM_0409,WVGA_COMM,WVGA_COMM_0409 and XIP.
UNZIP COMM，COMM_0409,WVGA_COMM,WVGA_COMM_0409 to SYSNEW folder,UNzip MSXIPKernel form XIP to XIPNEW folder then run"Build ROM.bat" and follow the guid.
sorry for my english...
hope u can understand...
Download:Uploading
Click to expand...
Click to collapse
U are the MAN!
Thank you.
Very nice
Hope I am now able to mod my favourite rom by myself now
Two worlds about how to integrate Sense in your ROMs maybe a good link if you have ?
Thanks
Edgar
I tested your tool and it is great as it is well guided.
but i can not find OEM folder in dump/dump only many folders containing "....dll" names and one folder called "SYS"
Also when editing OEM`s to the rom i get the error "Creating initialflashfiles.dat"
Looks like i am even not able to build a rom with a auto tool
P.S. Wanted to add cabs to your wm6.1 rom using this tool
eddgarms said:
Two worlds about how to integrate Sense in your ROMs maybe a good link if you have ?
Thanks
Edgar
Click to expand...
Click to collapse
Maybe this http://forum.xda-developers.com/showthread.php?t=633795 can help you.
FFboy: "IF u want to cook new version of WM build, just down load new SYS AND XIP file from somewhere like DFT."
What is DFT?
This is a DFT
Hello ffboy..
Can we use your tool to "modify" your sense rom, for exemple?
Thanks!
ps: moreover, i haven't got this folder "ROM\XIP\"...so i've got an error when i build the rom.
I tried to download your tool 3 times, but nothing....!!
What's wrong?
And I dumped the toshiba 6.5 rom, i did what you say in the first post and then i build the rom...
The original toshiba rom was 253mo and the new one is 244mo...but I didn't remove anything!!! Is this just because of the xip directory error i have during the "buildOs" process?
thanks!
iceeyes91 said:
I tested your tool and it is great as it is well guided.
but i can not find OEM folder in dump/dump only many folders containing "....dll" names and one folder called "SYS"
Also when editing OEM`s to the rom i get the error "Creating initialflashfiles.dat"
Looks like i am even not able to build a rom with a auto tool
P.S. Wanted to add cabs to your wm6.1 rom using this tool
Click to expand...
Click to collapse
Some roms that deleted all dsm and rgu files can't be dumped to OEM&SYS style
i can dump it out without do DM2PKG and copy all files in dump folder to SYS and do some mods.run kitchen maybe it works...
u want ro add cabs autoinstall on first boot?
just dump my rom to files and copy all off them into SYS,then creat a .rgu file and place it into a folder in OEM
add these in .rug file:
Code:
[HKEY_LOCAL_MACHINE\Software\TOSHIBA\AutocabInstall]
"cab1"=""
"cab2"=""
"Reboot"=dword:15
Nokser said:
This is a DFT
Click to expand...
Click to collapse
Yep!
That darkforcesteam。。。
pipolas said:
Hello ffboy..
Can we use your tool to "modify" your sense rom, for exemple?
Thanks!
ps: moreover, i haven't got this folder "ROM\XIP\"...so i've got an error when i build the rom.
I tried to download your tool 3 times, but nothing....!!
What's wrong?
And I dumped the toshiba 6.5 rom, i did what you say in the first post and then i build the rom...
The original toshiba rom was 253mo and the new one is 244mo...but I didn't remove anything!!! Is this just because of the xip directory error i have during the "buildOs" process?
thanks!
Click to expand...
Click to collapse
sorry fo my mistake...
download files in first threat
and it will fix erro..
the diff between ori rom and moded rom maybe because EXTRELOC useing a diff way to reloc moudules..i think
ffboy2009 said:
sorry fo my mistake...
download files in first threat
and it will fix erro..
the diff between ori rom and moded rom maybe because EXTRELOC useing a diff way to reloc moudules..i think
Click to expand...
Click to collapse
Thanks ffboy, i'll try!
pipolas said:
Hello ffboy..
Can we use your tool to "modify" your sense rom, for exemple?
Thanks!
ps: moreover, i haven't got this folder "ROM\XIP\"...so i've got an error when i build the rom.
I tried to download your tool 3 times, but nothing....!!
What's wrong?
And I dumped the toshiba 6.5 rom, i did what you say in the first post and then i build the rom...
The original toshiba rom was 253mo and the new one is 244mo...but I didn't remove anything!!! Is this just because of the xip directory error i have during the "buildOs" process?
thanks!
Click to expand...
Click to collapse
Size difference is mostly because of the IMGFS building, which may well be skipping free space at the end (used for ImageUpdate). It shouldn't matter too much.
I'll stick this, and unstick the other kitchen.
ffboy2009 said:
Some roms that deleted all dsm and rgu files can't be dumped to OEM&SYS style
i can dump it out without do DM2PKG and copy all files in dump folder to SYS and do some mods.run kitchen maybe it works...
u want ro add cabs autoinstall on first boot?
just dump my rom to files and copy all off them into SYS,then creat a .rgu file and place it into a folder in OEM
add these in .rug file:
Code:
[HKEY_LOCAL_MACHINE\Software\TOSHIBA\AutocabInstall]
"cab1"=""
"cab2"=""
"Reboot"=dword:15
Click to expand...
Click to collapse
Sorry i do not really get it
I dumped a official 6.5 Rom and there is like u said a OEM and a SYS Folder in dump/dump.
Using DMP2PKG i get an error on my win7 32bit by choosing "select folder"
Dumping your 6.1 rom it seems that in the dump/dump folder the OEM and his sub folders are not created, so all the data is loose.
will try some stuff and see where it gets me
Edit:
error : \.VM\imageinfo.bin not found, getting this with official and your 6.1
iceeyes91 said:
Dumping your 6.1 rom it seems that in the dump/dump folder the OEM and his sub folders are not created, so all the data is loose.
Click to expand...
Click to collapse
When dumping a cooked rom it is unlikley that you will get an OEM folder, i do not know why but the OEM parts can be found in the sys folder and relocated. Only dumping an original rom gives proper file segregation, ie OEM+SYS
Made my own rom now. Changed a official one and put some oem's in OEM folder.
Have some questions though:
How do you add the information to the rom , that it automatically adds a xxx.lnk file in startmenu for each program you have been put to OEM Folder??
Also how do you insert another input keyboard to the rom??
I wanted to add Neo2007 driverpack to my rom but it tells me that the xxx.dll already exists. how do i bypass this??
And how do I upgrade the netcf??
I now this is a lot of questions and maybe they are stupid, but i am totally new to rom-development. Thanks in advance
Thank you for this great tool
iceeyes91 said:
Made my own rom now. Changed a official one and put some oem's in OEM folder.
Have some questions though:
How do you add the information to the rom , that it automatically adds a xxx.lnk file in startmenu for each program you have been put to OEM Folder??
Also how do you insert another input keyboard to the rom??
I wanted to add Neo2007 driverpack to my rom but it tells me that the xxx.dll already exists. how do i bypass this??
And how do I upgrade the netcf??
I now this is a lot of questions and maybe they are stupid, but i am totally new to rom-development. Thanks in advance
Thank you for this great tool
Click to expand...
Click to collapse
Could you explain: if /OEM doent exit after DUMP, do you fill with your new cab (transform in OEM?) and add a registry entry ?
super_sonic said:
Could you explain: if /OEM doent exit after DUMP, do you fill with your new cab (transform in OEM?) and add a registry entry ?
Click to expand...
Click to collapse
I used this application to made my OEM's http://forum.xda-developers.com/showthread.php?t=525302
I just converted and put them into OEM folder.
Btw 1 thing concerning your 6.1 rom ffboy
Dumping it and putting everything to SYS does not work. I can not rebuild the rom , even if I do not add anything in OEM
iceeyes91 said:
Made my own rom now. Changed a official one and put some oem's in OEM folder.
Have some questions though:
How do you add the information to the rom , that it automatically adds a xxx.lnk file in startmenu for each program you have been put to OEM Folder??
Also how do you insert another input keyboard to the rom??
I wanted to add Neo2007 driverpack to my rom but it tells me that the xxx.dll already exists. how do i bypass this??
And how do I upgrade the netcf??
I now this is a lot of questions and maybe they are stupid, but i am totally new to rom-development. Thanks in advance
Thank you for this great tool
Click to expand...
Click to collapse
1.ALL files in SYS and OEM placed default in WINDOWS folder.check initflashfiles.dat in OEM_LANG_0409 and initflashfiles.txt in ur own oem folder.these files can change the place of file.
if u want add FFBOY.LNK to startmenu,add command like this.
Code:
Directory("\Windows\Start Menu"):-File("FFBOY.lnk","\Windows\FFBOY.lnk")
2.input keyboard can be added by download someone posted,u may search ur self.
3.if buildos tells u that XXX.DLL or some tile already exist,check the name and search in SYS or OEM to see if there exist a file in same name.
if exist,delete them except the newest one.
4.NETCF in wm6.5 already version 3.5
iceeyes91 said:
I used this application to made my OEM's http://forum.xda-developers.com/showthread.php?t=525302
I just converted and put them into OEM folder.
Btw 1 thing concerning your 6.1 rom ffboy
Dumping it and putting everything to SYS does not work. I can not rebuild the rom , even if I do not add anything in OEM
Click to expand...
Click to collapse
what buildos tell info to u?
I've been reading up on cooking ROM's and with the help of leeston i managed to create a basic ROM earlier in the week. After searching for guides / tutorials on this stuff im really not that much the wiser, i cant seem to find anything that explains it well enough, there always missing details. The actual cooking process seems fairly straightforward but its those extra bits im missing ie
how do i add my own packages - am i right in just copying them to the SYS folder or is there more to it ?
how do i edit the registry - I know how to edit the registry once the ROM is loaded onto my phone but how do i do it from the ROM without the phone ?
how do i add things to the start menu - When i add packages to the SYS folder and load the ROM into my phone the shortcuts dont seem to be in my start menu
how do i add sense - i've loaded the packages but it never starts and theres no sense option in today settings
im new to this so as you'd imagine the questions i have are endless ...
Im sure most of this info is on XDA already somewhere but i just cant find it, maybe im searching for the wrong term or something.
Any help from the chef's would be great, perhaps you could provide links to tutorials / info you've used when learning to cook. Im sure this stuff would be useful to everyone and may even encourage more to have a go at cooking .
drkdeath5000 said:
1.how do i add my own packages - am i right in just copying them to the SYS folder or is there more to it ?
2.how do i edit the registry - I know how to edit the registry once the ROM is loaded onto my phone but how do i do it from the ROM without the phone ?
3.how do i add things to the start menu - When i add packages to the SYS folder and load the ROM into my phone the shortcuts dont seem to be in my start menu
4.how do i add sense - i've loaded the packages but it never starts and theres no sense option in today settings
.
Click to expand...
Click to collapse
I am still new to cooking but I'll tell you what i believe to be correct.
1.Yes. To add a package to a rom you put the package into the SYS folder.
However be aware that the kitchen used for the TG01 cannot handle EXT (visual) packages, only OEM (old) packages can be used. Use Totalfires package converter to convert between the 2 types.
The above info is not strictly true but is what you need to know when cooking for the TG and i don't have the time or knowledge to write a complete tutorial.
2. Editing the registry is all to do with .RGU files, you can create a package with a new one in or edit the existing ones within the packages in the SYS folder. You can edit them with notepad but i suggest using Notepad2.
Once you open an .RGU file you should recognize the reg key text in the file and edit it accordingly. As far as i am aware the file MUST have REGEDIT4 in the first line and an empty line at the bottom in order to work. Another way is to edit the regkey on your device then export the regkey using resco or something similar, then rename the resulting file from .reg to .rgu then open it in note pad and copy and paste it into another packages .rgu file, or create a custom package for that .rgu file.
The registry can also be modified using cab files during autorun, but this can be a little messy as the cab can be uninstalled by the end user causing problems.
3. To do this you need to edit the initflashs.txt file within the . This can be done manually or with one of the many package tools available on this site. The one i use is below, it does the hardwork for you, you click a few options and it edits the required files as needed.
4. Sense is a funny one. You should just need to add all the required packages to the SYS folder and away it goes. Unfortunately this is rarely the case. It should just a case of making sure all the sense packages are there, including its many dependencies. Sense is one of my weaker areas so maybe some one else has better advice.
Hope this is useful.
do you have a loooong far way, but read the forumposts an try, try and shortPin and try. that was my way, or is my way. i have don´t helping, all found with google and in xda forum.
unfortunately, my English knowledge is terrible. otherwise I would write more.
best to dump a officiels ROM or miROM5 , then you have an example
related post here
http://forum.xda-developers.com/showthread.php?t=750261
PC Software Reg-editor
http://ceregeditor.mdsoft.pl/index.php?id=1〈=en
CAB to OEM
http://forum.xda-developers.com/showpost.php?p=3942000&postcount=1
EXT to OEM
http://www.ppckitchen.org/forums/re...e666.ppckitchen.org/Tools/EXT%20to%20PPCk.exe
All folder to cooking need a .dsm (and/or) .rgu file
RGU name Generator (such as Reg- file) , dsm become automatically
http://www.famkruithof.net/uuid/uuidgen (Fetch UUIDs of another type to Version 4)
do you have a loooong far way!
... Or make a good donation to nokser or ffboy, they teach you
Hi my friend, I have a problem to cook a ROM with cab which required a reboot or witch have a information message ( SWYPE or GPSMOdDriver for example)
Do you know a solution for this please?
Thanks in advance.
Thanks for the info leeston and miro ;-). I havent had time to try it yet but will be over weekend and im almost sure now i know where to find the registry files ill be able to cook something decent up since that was my main problem. Thanks again for the help.
EVEALEX62 said:
Hi my friend, I have a problem to cook a ROM with cab which required a reboot or witch have a information message ( SWYPE or GPSMOdDriver for example)
Do you know a solution for this please?
Thanks in advance.
Click to expand...
Click to collapse
I may be wrong but when the cab files are first installed doesnt it automatically reboot ? If not you can always do a manual reboot ;-).
I've tried everything to get sense working but im just having no luck ... copied the packages to the sys folder, flashes fine, boots fine but no sense and now theres no setting shortcut in the start menu ?
Could i ask for the exact procedure for installing sense please ? Im getting my packages from here but replacing the 2017 home with 2016. Could i perhaps be missing something ?
Thanks again
drkdeath5000 said:
I may be wrong but when the cab files are first installed doesnt it automatically reboot ? If not you can always do a manual reboot ;-).
Click to expand...
Click to collapse
I have try to delete the line "Reboot" after autocabinstall but nothing change the phone always reboot ... I think the only thing is to do OEM package...
I have test with many cabs but nothing works same as you with Sense ...
Have you found solutions ?
EVEALEX62 said:
Hi my friend, I have a problem to cook a ROM with cab which required a reboot or witch have a information message ( SWYPE or GPSMOdDriver for example)
Do you know a solution for this please?
Thanks in advance.
Click to expand...
Click to collapse
The solutoin is to use autorun instead of cabinstl, you can then write a custom script to handle the input required by the cab.
However this is above my head, and i couldn't get autorun to work. FFBOY knows how but i doubt you will get his help as he doesn't seem to check any threads other than his own rom threads, and if he does his responces are few and far between.
drkdeath5000 said:
I've tried everything to get sense working but im just having no luck ... copied the packages to the sys folder, flashes fine, boots fine but no sense and now theres no setting shortcut in the start menu ?
Could i ask for the exact procedure for installing sense please ? Im getting my packages from here but replacing the 2017 home with 2016. Could i perhaps be missing something ?
Thanks again
Click to expand...
Click to collapse
Those are the packages i used and they work so it's not the packages, but i cheated and dumped a sense rom then modified it. I don't have time to try and work out how to do it properly unfortunatley.
leeston2379 said:
Those are the packages i used and they work so it's not the packages, but i cheated and dumped a sense rom then modified it. I don't have time to try and work out how to do it properly unfortunatley.
Click to expand...
Click to collapse
Well atleast i know the packages are fine, i was starting to wonder if that was the problem . Theres some satisfaction in doing it yourself but like miro said i think its just too much for me, ill give it another go later in the week and if that fails ill just dump a sense rom like you did ... if there was just a tutorial on installing sense packages etc id be fine, with sense being so popular you'd think there to be loads of tuts.
Hello there, im trying to make a 6.1 rom with ESP lang but i can't port the one posted by Da_G be cause the rom maker cab sends me problems with some files.
I hope some of you can help me with the lang porting or any pack I can use.
I'm using Old style kitchen made by aeroflyluby
Since you are speaking about WM 6.1 i suppose that you got the right build from the right Da_G thread....anyway ,here is the link:
http://forum.xda-developers.com/showthread.php?t=547314
Actually I'm using that package that you mentioned but no luck, when i change the files from the SYS folder the program "my build os" sends me an error anywhere and if y solve it (by deleting the problematic file) the rom maker (the .cab that calls the pack of tools) sends me an error while is rebuilding the files so I dont know what I'm doing wrong.
Do I have to use the SYS files with or without the 0409(ENG) files or i have to replace them?
Is there any proble if I cant find any 0C0A(ESP) OEM folder files?
I hope you can help me.
Regards.
If you are cooking for 0c0a then every 0409 folders must be left from your kitchen.
With 0c0a SYS you need 0c0a OEM at least OEM_Lang_0c0a otherwise your rom will not work.
Lokmetro said:
Actually I'm using that package that you mentioned but no luck, when i change the files from the SYS folder the program "my build os" sends me an error anywhere and if y solve it (by deleting the problematic file) the rom maker (the .cab that calls the pack of tools) sends me an error while is rebuilding the files so I dont know what I'm doing wrong.
Do I have to use the SYS files with or without the 0409(ENG) files or i have to replace them?
Is there any proble if I cant find any 0C0A(ESP) OEM folder files?
I hope you can help me.
Regards.
Click to expand...
Click to collapse
Oh i see. So i can extract 0c0a OEM files from any 6.0 dump folder? or I have to find a new oem folder files for 6.1?
BTW i'm cooking for a BenQ-e72 so I can't find any rom in spanish except for the one that came with my phone (WinMo 6.0)
a_GWM 6.0 OEM should be work with WM 6.1 at least you will need a WM 6.1 Initflashfile.dat (it is in OEM_Lang), sometimes Da_G shares his build within the Initflashfiles for every language,check in that thread to see otherwise try to cook it with your 6.0 initflashfile.dat and check if something is missing in StartMenu.
Lokmetro said:
Oh i see. So i can extract 0c0a OEM files from any 6.0 dump folder? or I have to find a new oem folder files for 6.1?
BTW i'm cooking for a BenQ-e72 so I can't find any rom in spanish except for the one that came with my phone (WinMo 6.0)
Click to expand...
Click to collapse
Thanks for the fast answer. I'm going to look for the WM from Da_G but I don't remember if i have seen that thread before, and btw I will take some time after I can post any advance be cause I'm not at home. for now I can only ask things if I have any question.
I have tried what you said but no luck. the phone wont start. it just stay in black screen, i don't know what i'm doing wrong
can you xplain exactly where does your rom stucks? maybe is not a SYS trouble maybe is a XIP trouble due to not pòrting ok or maybe is the wince. nls WWE or any SYS pkg missed
Well the rom wont give me any image, it just shows me a black screen and the normal screen lights for the rest it does nothing.
Once i got lucky but I had problems with the Start menu be cause i wasn't able to see the icons, i think it was caused by the initflashfiles.dat but now I can't do it again