CPU usage and battery problem - neoTouch S200 General

I have serious problem for the CPU usage after some software install and the task manager always showing CPU utilization is 100% in Idle mode. Even uninstall the software but the problem is still exists. But i don't think this is software problem and may be some setup in the registry had been changed.
When i click on the task manage, the "taskmgr.exe" always consume a lot of CPU resources. The only way to resolve is hard reset the phone.
Another problem is the backlight saving mode, after 1 min. the screen will dim down and never can light up again. So i think it's some kind problem in energy saving mode.
Please let me konw if some kind of registry setting can be change to resolve the problem.
Thanks

There's a many reports about backlight idle problem, I have it too (backlight never can light up from "off" to "on", or from "dim" to "on"). Possible solution in some cases is to turn off any backlight auto adjust functions (maybe a new solution(s) is founded).
For memory & cpu usage problem, I guess is most likely to perform a hard reset instead of searching (cope whole) in registry of FW.

Related

Automatically turn phone/internet off when battery is low

Hi,
Does anyone know of any software that'll turn off the phone or internet connection when the battery power reaches a certain point i.e. 30% of max?
I would find this very useful as i often forget that it's on and wake up the next morning to find that my battery is all but flat
Cheers,
PhoneAlarm gives you an adjustable warning alert, so you don't just get the warning when it's too late to do owt about it if that's any use.
thanks, it's not quite what i had in mind though. I really want something that will turn the phone/gprs functionality off automatically at a predetermined level... is there anything else out there?
Predetermined, I don't know. You can hook into certain events in the registry, or use the system event scheduler (eg Memaid, SKTools). Then use software like VJVolubilis to disable wifi and gprs, and my other apps to close the phone.
V

Some battery issues

Hello there. Ok so I have this weird issue my hd2 is eating up battery for breakfast. It's weird cause on standby it's incredibly resourceful and only uses around 4% overnight. On any kind of usage, it literally starts to drain before my eyes!
I've seen some people set the power management off in advanced config, just wanted to ask where do I get that. And in bsb tweaks I set the option to enable power management, is that a setting I could go into somewhere or I just set that on and off?
I think everyone has issues till we find the best ROM/RADIO solution...depending on our usage/country! Today my battery drained 30% overnight...and it was fully charged when i go to bed...(7h of sleep)! But since i woke up...(2h...it only consumed 2%!)
And now as i write this i'm having a SOD (Sleep of Death) @£§€[#"$!!! :/ I'm really tired of this sh...! I think is a problem related to the latest builds rather than a phone problem, nevertheless it freaks me out!!!
Check the brightness...i have mine at 30% which is enough for most situations!...
(TIP: Create a shortcut to automatically rise the brightness to 100% when you are under direct sun, otherwise you'll have trouble to read the screen!)
...this is what saves most juice...then you could try and look for tips to maintain Activesync shutdown when not in use...always close your apps....and (IMPORTANT) disable automatic updates (or at least set the update time to 2h or more), after that check for programs to disable/close idle internet connection (like: WMLongLife, Bandswitch v2.9)
Hope this helps!
Shwanz..you need another zimage for your build,changed mine to the 4/05/2010 havent had any probs,but you might have to find one that works for yours.
Peace

[Q] Help, what is your battery drain, and why mine is sooo High???

First - let me state - and it is true - that I used the search function.
I read pages and pages of advices to lower battery consumption on my HD2 Android... without success...
First I used an SD ROM. I read that a NAND would improve battery life. So this is what I did.
I am also using SetCPU with a profile when battery <30% and another one when screen is off to LOWER the CPU speed. In normal use, I set CPU speed at 768MHz trying to lower power consumption...
I use a task killer to free memory and prevent silly programs to drain my battery off...
I use Juice Defender to control wifi, data, etc...
And with all of this in place, my "Current widget" shows a consumption of 180mA with screen on doing nothing, up to 350-400-500!!! mA when acutally using the phone wifi+sync...
In the forum I read consumption like 3 mA - 9 mA!!! This is FAAAAAR Way lower than what I ever had with different builds...
So this is an help scream to everybody: what is your battery drain, and why mine is sooo High???
Hint: I am also a fan of LCD Density changer, with setting at 165... can this have an influence on battery drain??? I reverted to the original 240, doesn't seem to have any influence...
Thanks for your help,
Looki
My drain is 3-9 ma in STANDBY ONLY now and again slightly more but mainly the values stated. And my screen on between 120+160ma. Turn off auto brightness if you have it on, and set it at the lowest your comfortable with (display is big batt drainer) I DONT use taskillers as they do more harm than good. I use NO undervolting and only the default settings with my rom. I have low lcd density setting 167 i think. Lcd density has no effect on your battery drain!
Found this here. http://forum.xda-developers.com/showpost.php?p=13151738&postcount=11296 Might be of some use to you? (from hyperdroid gbx thread)
Whats youre rom?
And do u use ext partition on sd?
I dont even use SetCpu anymore. Only taskkiller.
Auto-brightness is on
Auto sync is off.
Im using UD 3.3 nand from crawlingcity
Stansby is 3 -6 ma
Using round 160 to 250.
Sent from my HTC HD2 using XDA App
How long does your battery last from 100% to self shut down? As for Current Widget, keep in mind that when people say "Standby", its generally referring to the screen being off. Set current widget to update every 30 seconds, and turn the screen of for 40 seconds. Then quickly turn the screen on, unlock, and check what it is reading then.
If its still high, try "Force Stop" applications in the Settings > Applications menu one by one, i've had to do this more than once to locate problem apps that were destroying my battery in standby mode.
I'm knew to Android, let me share you my idea.
I use UD3.3
I removed google stuff
gmail, search, etc
No auto sync
Location off
Always kill market when screen off.
I use beautiful widget for weather manual refresh.
I use battery widget
Auto level for screen
sometimes WIFI on
2g Only
2 or 3 calls,total of 3 to 4 min a day
My battery stay 48 hrs in STBY mode.
I think the most draining factor is
1) google stuff they are battery hog.
2) screen
3) bad written programs (every time they check connection to
internet or looping for doing something, looping will make
CPU in high frequency).
4) bad device driver such as BT which is known as 60ma
drain. it is not the hardware but it is the software doing
the drain.
thanks
pc2058 said:
I'm knew to Android, let me share you my idea.
I use UD3.3
I removed google stuff
gmail, search, etc
No auto sync
Location off
Always kill market when screen off.
I use beautiful widget for weather manual refresh.
I use battery widget
Auto level for screen
sometimes WIFI on
2g Only
2 or 3 calls,total of 3 to 4 min a day
My battery stay 48 hrs in STBY mode.
I think the most draining factor is
1) google stuff they are battery hog.
2) screen
3) bad written programs (every time they check connection to
internet or looping for doing something, looping will make
CPU in high frequency).
4) bad device driver such as BT which is known as 60ma
drain. it is not the hardware but it is the software doing
the drain.
thanks
Click to expand...
Click to collapse
Bt drain has been fixed, wil now get you 6-15 ma.
Google stuff aint bad, just set update frequentcy to manual.
(Helps with alot of other programms that require internet.)
Sent from my HTC HD2 using XDA App
[Ultimate GUIDE] Increase your battery life on Android
Thanks guys for your help!
I made a compilation of all tips I could collect and/or find by myself.
They are here: http://forum.xda-developers.com/showthread.php?p=15229416
Regards,
Looki

[hint] battery saving tips

Disclaimer; This does not damage your phone at all or fry/mess your cpu.
This method is used to lower CPU stress and increase Battery life
This method works for all rooted phones.
IMPORTANT: The newer versions of SetCPU might prevent your phone from entering deep sleep. Download version 2.24 from the following link which is the one with no problems and completely works 100%.
LINK
Deep Sleep breaks when charger is plugged in, you can see this by CPU SPY application available on playstore
Stop Downloading Battery Saving Applications, they do nothing and uses RAM.:silly:
Also Turn BLN off when you are sleeping.(It also Consumes battery and sometimes prevent deep sleep of CPU)
Set your Brightness to minimum and disable auto brightness.
LINK to Display Brightness
Instead use lite app called - Display Brightness from play store.
Turn off wifi and mobile data when not in use.
Use toggle for auto rotation, and keep off when not needed.
For more battery Saving, disable all animations and set screen timeout to 1min.
The S plus sucks in battery life. We all know that.But here's a fix, Try Under clocking instead of Over clocking.
When screen is on:
MAX 1.4Ghz(Why to OC??, if your phone runs smoothly on 1.4Ghz)
MIN 192Mhz
Ondemand governor (This governor jumps up to max when needed but spends most time on the min freq. Best battery saver.)
When screen is off:
MAX 365 Mhz
MIN 192 MHz
(This prevents lagging when playing music and other activities when screen off)
This way, you have a beast quick phone when you're using it, and the best battery saver when you're not!
NOTE: Turn off Autosync from the settings. It's only used to sync your gmail and contacts and such. You can manually sync when you add a new contact and since I don't use gmail, I refresh manually whenever I do.
SetCPU:LINK
Specific instructions for those that can't get it to work!:
On SetCPU:
Click Add profile
Where it says Profile, select it and tap "Screen Off"
Set the frequencies you want in use while screen is off (If you want just one frecuency, put both sliders on the same number)
Set priority (in case you have other profiles, otherwise don't bother)
Select governor (Won't really matter since cpu is gonna be running at 1 frecuency)
Tap save
Go back to Profiles tab at the top, then tap Enable at the top left to make the profiles work.
For a list of most governors and I/O schedulers detailed;
Visit
1.LINK
2.LINK
To check if its all working, install CPU spy from the playstore: LINK
For Playing GAMES(HD)/HEAVY GAMES, Plug your Charger in and play if possible.:good:
Most Important thing is to calibrate battery,
Calibration of battery is needed when you change your ROM.
This process wipes batterystats.
Battery Calibration
1. Charge 100%(NON STOP)
2. Download any battery Calibration tool from play store; (Link to App)
3. Open that app, click battery calibrate
6. Unplug your charger
7. Discharge your phone down to 0% during the day
8. Charge back up to 100% (NON STOP)
This is to make sure you're using your battery at 100%. Only do this after you flash a new rom.
The worst battery killer is 3G. No matter how much you try to optimize battery by tweaking and underclock, if you have 3G on, you're gonna have a bad battery drain.
Make sure that Autosync is disabled.
Done A small test usage 14 mins , you can see in attachment your CPU should look like this.
THIS READINGS FROM MY SGA.
And never ever install the Facebook App if you want to use your phone for more than 3 hours!
Sent from my GT-I9001 using xda app-developers app
Don't get apps that take background processes like what xellar said, facebook, and some other apps like tap tap revenge 4. Anyways thanks for the tips and link to free setcpu
Other people can also share VALID ideas about saving battery.
Will help many users.
Nice advises. I'm already using these.
One more good thing is turning mobile data off whenever you are not using it, also bluetooth, lowering brightness.
Good app for doing so is Power Toggles. You can always have widget on home screen and switch on/of these things with one tap.
Riiight.. Turn off autosync, disable 3G and wi-fi, dont use apps or games.. I might as well buy Nokia 3310..my phone lasts easily whole day with wifi on..with 3G it can get me at least 6-9h which is fine.. The key is to turn off 3G when you are on wifi and turn down brightness.. Everything else is not using your smartphone smart..
1) Set your network mode to 2G only if you're not using 3G/WCDMA
2) Manually set your operator in settings.
PS: After flashing one of firmwares I got a bug - battery is not charging to 100% while phone is ON. Only to 99% and not showing a message about fully charged battery... But when the phone is in off mode - it charges to 100%. Anyone knows how to fix this thing?
apkfox said:
1) Set your network mode to 2G only if you're not using 3G/WCDMA
2) Manually set your operator in settings.
PS: After flashing one of firmwares I got a bug - battery is not charging to 100% while phone is ON. Only to 99% and not showing a message about fully charged battery... But when the phone is in off mode - it charges to 100%. Anyone knows how to fix this thing?
Click to expand...
Click to collapse
Change/upgrade your firmware...
Battery Calibration
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#Calibrate_Battery
This way works without an app.
TheBlackWolf said:
Change/upgrade your firmware...
Click to expand...
Click to collapse
Didn't help. But deleting batterystats.bin helped. Thanks anyway. :good:
Take a other kernel with better voltage and governor configuration.
Set Display time to 30sec.
Kind regards.
enable "only 2G"
turn off wiifi
turn off bluetooth
black screen wallpaper help?
Sent from my GT-I9001 using Tapatalk 2
If you are on CM7 try this... From CyanogenMod setting.
This will help to save battery.
cheehsiang said:
black screen wallpaper help?
Sent from my GT-I9001 using Tapatalk 2
Click to expand...
Click to collapse
On Amoled-Displays it should help. Inverted Apps, too.
setCPU
i testet the new version of setCPU 3.0.9, deep sleep works perfectly.
If profiles are not used it exits and there is no use of RAM in both versions (But then you do not have the unique feature of auto switching profiles ).
Is there another app with auto-switching?
buffo1987 said:
On Amoled-Displays it should help. Inverted Apps, too.
setCPU
i testet the new version of setCPU 3.0.9, deep sleep works perfectly.
If profiles are not used it exits and there is no use of RAM in both versions (But then you do not have the unique feature of auto switching profiles ).
Is there another app with auto-switching?
Click to expand...
Click to collapse
Actually no idea.
But other simple and best app for controlling CPU is NoFrills.
TheBlackWolf said:
Actually no idea.
But other simple and best app for controlling CPU is NoFrills.
Click to expand...
Click to collapse
But it has no profile-autoswitching, in fact no profiles at all. Voltage control Extreme has at least profiles, but without autoswitching. What is good about Voltage Control Lite/Extreme is that it sets cpu setting with init.d and so the app does not have to start on boot
Yes that is nice...
fo more info how to use
visit here
Link to App
TheBlackWolf said:
[
Stop Downloading Battery Saving Applications, they do nothing and uses RAM.:silly:
<snip>
When screen is on:
MAX 1.4Ghz(Why to OC??, if your phone runs smoothly on 1.4Ghz)
MIN 192Mhz
Ondemand governor (This governor jumps up to max when needed but spends most time on the min freq. Best battery saver.)
When screen is off:
MAX 365 Mhz
MIN 192 MHz
(This prevents lagging when playing music and other activities when screen off)
This way, you have a beast quick phone when you're using it, and the best battery saver when you're not!
<snip>
Click to expand...
Click to collapse
Many thanks for the battery saving hints. I'll finally kick out the Task Killer App, doesn't really seem to do anything except creating problems ..
For the statement that Underclocking would help in saving battery I wouldn't fully agree. A slow cpu needs more time to complete a task before returning to a sleep state. Of course the battery drain is higher with a higher frequency (which also require higher voltages), but I believe, that there isn't much to gain on this front. As long as I don't see any profound evidence I'd even suspect, that an underlocked CPU overall could even cause more power consumption. You can also read more opinions about this in general in this thread.
Much more beneficial would be to identify those apps that cause frequent wakelocks. Does anybody have hints here, how to track down those 'bastards' ? (From my Linux I know 'powertop', does something similar exist for Android? (Or are the battery statistics in CM10 sufficient to decide which app to wipe?)
z3non said:
Many thanks for the battery saving hints. I'll finally kick out the Task Killer App, doesn't really seem to do anything except creating problems ..
For the statement that Underclocking would help in saving battery I wouldn't fully agree. A slow cpu needs more time to complete a task before returning to a sleep state. Of course the battery drain is higher with a higher frequency (which also require higher voltages), but I believe, that there isn't much to gain on this front. As long as I don't see any profound evidence I'd even suspect, that an underlocked CPU overall could even cause more power consumption. You can also read more opinions about this in general in this thread.
Much more beneficial would be to identify those apps that cause frequent wakelocks. Does anybody have hints here, how to track down those 'bastards' ? (From my Linux I know 'powertop', does something similar exist for Android? (Or are the battery statistics in CM10 sufficient to decide which app to wipe?)
Click to expand...
Click to collapse
Better battery stats is application useful for identifying partial wakelocks.
Its an paid app, but Google helps... Lol
Your above sentence about UC comes true for heavy usage.
Normal apps can run smoothly and at same speed as of OC.

Turning off the LCD without triggering the Sleep Mode is not possible in CloverTrails

Hi everyone,
I have a ThinkPad Tablet 2. Last night I wanted to download a file, but I had a problem. I started my download through Internet Download Manager, but I couldn't turn off the display without stopping the download progress. This means Windows 8 translates "Turn off Monitor" to "Sleep Mode" so every background task stops.
I don't want to see the bright light of the screen ( even at lowest ) when I go to sleep, and more important, the health of display is a concern so I dont want it to be always on.
So I asked. And so far every app that has written for turning the display off, is somehow faulty, and it seems its just because Clover Trail which has Connected Standby thing.
I've tested NirCMD, RefreshLock, AutoHotKey and TurnOffLCD. NirCMD, RefreshLock and AutoHotKey trigger sleep mode right away. But TurnOffLCD turns of the display and download continues, but only for a time. After an unpredictable amount of time, device does not interact any more.
So what's the catch ?
Thanks in advance.
Did you find any work around for this issue ?

Categories

Resources