Problem with upgrade - Hero, G2 Touch General

Hi to everyone,
i' va a problem with my hero.
when i try to install the last upgrade (FOTA) on my hero, the phone reboots, e stays with the screen "locked" with Hero written.
Yesterday i leaved the phone, in this situation for 2 hours, but nothing has changed.
I try to install the old upgrade, and i try to came back to original factory setting. but nothing.....
Any suggest...
Sorry for my english
Help me, please....

Related

Error 112 CE ROM Update Error

Hi, Don't know if anyone can help. I had a perfectly working XDA2 up until I tried to upgrade the ROM the other night. Now I have a useless hunk of junk that states "error 112 CE ROM update error. I have browsed every fix given on the forums, but to no avail. As my unit is covered by warranty (and I may possibly be getting a XDA2s as a replacement heh heh") I am not too bothered, however although a newbie I would still like to know if there is any way I can fix this problem that I haven't yet tried, just for future reference. At the moment the only display I get, on an unlit screen is either serial V1.03, when not in cradle or usb v 1.03, when in cradle. I have tried soft reset, hard reset, tried a coupe of rom upgrades, disbled active sync, and even tried prayer and using the force! Unfortunately my jedi powers are not sufficiently develpoed enough, so I would be very grateful if you could help me out here. Incidentally, this site is fantastic! Thank you to all who are resposible for it, and long may it continue. Merry Xmas!
You could try flashing with the launch rom from O2, I dont have the link for the download but I am sure somebody else has. The launch rom was available for download so you could revert in case of problems.
cruisin-thru said:
You could try flashing with the launch rom from O2, I dont have the link for the download but I am sure somebody else has. The launch rom was available for download so you could revert in case of problems.
Click to expand...
Click to collapse
I had same eror 112 CE rom bla bla bla... on my comp.
Some program from my comp. crashed upgrading every time.
Solution that worked for me was clean computer with only activesync instaled and everything worked fine with same ROM from before.
Thanks guys, will try those methods. Nothing to lose eh! Merry XDA-MAS to you all. Ho ho ho!
I had the same or similar problem, just upgrading from the official 1.72.181 a window came up telling some thing was wrong, do a hard reset and try again.
After the hard reset all I can see on the unlighted screen was a Serial 1.06.
Launched the upgrading program again with the PDA on the craddle and it seems to be performing correctly and I can see the upgrading process in the PDA screen if alighted with a torch.
May be if you try it again you succeed.
Jose Adell

[Q] Can't echange due to ROM update

Hi Guys, I have had this phone for around a week now. I have it rooted and installed a T-mobile ROM. The problem I am having is that I cannot do the 3 button trick. I have been browsing the forums and everyone who is having this problem is told to exchange it.
Since I have a different ROM, and accidentally wiped my phone during the install not very smart on my behalf). My phone boots up with this ugly pink "stick together" logo and irritating sound.
Is there a download where I can change it back to the original one that came with my Bell?
I originally posted this in the Vibrant section and realized that more Bell users were over here in the forum. Sorry for the double posting.
ayy yai yai viejo... this is complicated.
Where are you in Canada?
try these methods that people have tried,
http://forum.xda-developers.com/showthread.php?t=754673&page=3
some of them worked, some of them not, but still should try it, to at least get it to Download mode, so you can flash it back to the stock JG9 or JH2 ROMs
I am unable to do the three button trick, but through ROM manager I can load other ROMs. I just don't know where I can download a stock ROM?
I am located in Calgary, Alberta.
good, at least you got that working
go to the ROM Manager topic in Development section and ask for help there for the ROM that you need to fix the phone.
Thanks for your input guys, I actually ended up taking at back and told them I accidentally loaded the wrong ROM. And without the three button enabled I was unable to flash it back to the proper ROM. Thus killing two birds with one stone. And now I have a device that has the 3 buttons enabled.
nice! good to hear that

Update Failed - What shall I do?

Hey,
because I´ve posted in a lot of Threads my Questions, i think, it would be better if I write everything in one.
So:
First I Updated my GT540 from 1.6 to 2.1.
Because it wasn´t the German version, I had to do it a second time.
It worked, but there were a Window, that told me, that com.android.(....?...) has to shut down.
So the OS was broken. I thought I just have to restart the Phone and then, everthing will be fine.
As it boots up, it stucks at the LG Logo.
I tried everything you told me here at the Board, what to do in this Case.
I should update it again but with the setting at Emergency, because i can boot my Phone into Download Mode.
As I wanted to Update, the Updater works, ´till its tells me, that the phone is not found.
Why? I have all the drivers installed. It could be, because I can not disable LGE Modem in my Divice Manager. Can someone, who speaks German, explain it to me, or give me some Screenshots.
Pls Help me.
I got my phone since last Tuesday and I´m very Angry about this Updating Fail and Stuff.
What if this is a irrepaible Case. Is the Waranty?
THX a Lot
TehBone

[Q] strange behaviour after 1 week rooted

Hello guys
I am new to android and to galaxy s. Actually i bought my first android phone 1 week ago, and it is a galaxy s4 gt-i9505
i rooted the phone and everything was fine. After one week, i made a restart of the phone, and it remained stuck on the second logo of samsung.
I did try a hard reset, but nothing changed
I did try to root again the phone with odin, and after it passed the second logo screen, a window in greek language showed off (using google translator basically it tells: updating functions of android application..opening application) and it is stucked there.
Did i bricked my device and nothing can be done?
Please help me
P.S. Can i try to flash my s4 with stock firmware?
spearfishing said:
Hello guys
I am new to android and to galaxy s. Actually i bought my first android phone 1 week ago, and it is a galaxy s4 gt-i9505
i rooted the phone and everything was fine. After one week, i made a restart of the phone, and it remained stuck on the second logo of samsung.
I did try a hard reset, but nothing changed
I did try to root again the phone with odin, and after it passed the second logo screen, a window in greek language showed off (using google translator basically it tells: updating functions of android application..opening application) and it is stucked there.
Did i bricked my device and nothing can be done?
Please help me
P.S. Can i try to flash my s4 with stock firmware?
Click to expand...
Click to collapse
greek language ???
no you didnt brick your device though soft brick is what happen your case
good news is you do have option to reflash rom again ,if i am in your shoes ill flash stock rom that came with phone, than flash pre rooted rom from here http://forum.xda-developers.com/showthread.php?t=2250824 and after that it is up to you
Great
Thank You man..i actually followed this guide on soft brick and it worked ...
Yes in greek language, and it came up even on the first boot even the phone was bought in switzerland..strange
Anyway, thank you very much, now my s4 is working perfectly
http://forum.xda-developers.com/showthread.php?p=41072426...this was the guide

Motorola Moto G6 plus bootloop

Hi Everyone !
I've got a little reboot loop problem. I have bought a Moto G6 plus on Amazon past sunday. The fifth hour after I got it, it begin to bootloop. the only way to go throught, is by wipe/factory reset the phone. Neither the safe mode or anything else would work. 8 hours after the factory reset, the bootloop has happen again so I had return the phone, saying to myself: "I got the bad one in the batch". I receive a new one yesterday and unfortunately, it does the same thing . Pop on the Moto start screen, then "Hello moto", then the Lenovo label appear, finally I see my lock screen and all of this start again.
Now I'm think maybe its the data restore of my apps, because I restore from my "transit" phone, an old Samsung galaxy core on Android 4.4. Or its a software bug and may I can fix it ?
I asking your help today because, as a IT technician, I know that everything with a CPU can be diagnostise. I can easily go check the log but I can't understand the meaning of all I will read. For exemple, I got into it the last time the phone bootloop and I find something like this : Error 'slot' found in the device tree. I did some reasearch but found nothing.
Please, help me find out what is the problem so I will know exactly what to do with my phone. I pretty love Motorola and this model is awesome when it work.
Thank you,
Cédric.
p.s.: I speak french first, so I'm sorry for my mistake's writing.

Categories

Resources