Phone won't turn on! - Touch 3G General

Hello guys.
I have a Jade (Touch 3g) which I have hard-spl'd and installed the SpaceJade WM6.5 rom like 2-3 months ago. Yesterday I have turned off the device and took out the battery to check the serial number. Device was working perfectly fine until I turned it off. Than I have noted the serial number and put the battery back in. Than I left my desk for like 45 minutes.
When I got back, I remembered that I did not turned it on. And when I tried to turn it back on, nothing happens! I have tried to charge it but even charging light is not lighting up!
I have tried the volume down + middle button + power button combination, even pressing the reset button, but no luck.
It is probably a hardware issue, which requires an authorized service station to look at it. But the problem is, I have hard-spl'd it and they are probably going to claim that it is out of warranty.
So my question is, which is really quite silly (but I still need to try), is there any way to load stock-spl before I send it to service station? I know it is not possible to install stock-spl without turning it on but maybe there is a chance
By the way, I did not made any chance on the phone or installed any programs in last one month.

may be..
Sometimes you simply have not correctly installed battery, so your phone can not give it power

kkkkbn said:
Sometimes you simply have not correctly installed battery, so your phone can not give it power
Click to expand...
Click to collapse
no, I have installed the battery correctly, no problem. It is not possible to insert it in wrong direction anyway.

by the way, I have measured the battery with a multimeter, it reads 3,8 volts so battery is OK.

Related

Let Andriod die now have a paper wheight

ok here is the problem.
4 nights ago i forgot to plug in my hd2 while android was running and the battery died.
the next morning i went to turn it on and the screen no longer turns on but the phone does boot. the battery doesnt charge, status light doesnt either, end key doesnt work, when i answer calls no noise can be heard or made.
any hope?
Im guessing you cant run bootloader?
Maybe this is a warrenty jobby
If you know someone with another HD2, Try swapping the battery.
chrisizzle492 said:
ok here is the problem.
4 nights ago i forgot to plug in my hd2 while android was running and the battery died.
the next morning i went to turn it on and the screen no longer turns on but the phone does boot. the battery doesnt charge, status light doesnt either, end key doesnt work, when i answer calls no noise can be heard or made.
any hope?
Click to expand...
Click to collapse
does it enter in bootloader mode?
retry flashing wm rom+radio
chrisizzle492 said:
i went to turn it on and the screen no longer turns on but the phone does boot. the battery doesnt charge, status light doesnt either, end key doesnt work, when i answer calls no noise can be heard or made.
Click to expand...
Click to collapse
Hi Chris,
Please eleborate/clarify your OP, because I don't think anyone gets this... At least i don't! You say the screen doesn't turn on but the phone boots?! How do you figure that? Your device is actually on because you can receive/answer calls!?! :S
Sounds like your device has just BSOD (Black Screen of Death) which is discussed quite a lot here. Just press reset button or pull the battery (please tell me you have tried that before...).
If your device IS NOT powered on, please try this:
Does the device vibrate shortly when pressing the End-button? If so you should leave it connected to the charger for longer. If battery has drained too much it takes a while for the device to allow it to power itself up (prevention of overdrainage, which Lithium-batteries don't like very much).
Do you charge through USB, or with the supplied charger? I've had this before trying to charge it with a (different brand) microUSB charger. Turned out most chargers only give out 500mAh, whilst my normal charger (and car-charger) give out 1000mAh i believe. That might help.
You can order a cheap replacement battery from China (i got mine with dockingstation), which is already charged about 60% (for storage purposes).
BTW if your problem is fixed, please add the prefix [FIXED] or [SOLVED] to your topics title.
shufflez said:
Hi Chris,
Please eleborate/clarify your OP, because I don't think anyone gets this... At least i don't! You say the screen doesn't turn on but the phone boots?! How do you figure that? Your device is actually on because you can receive/answer calls!?! :S
Sounds like your device has just BSOD (Black Screen of Death) which is discussed quite a lot here. Just press reset button or pull the battery (please tell me you have tried that before...).
If your device IS NOT powered on, please try this:
Does the device vibrate shortly when pressing the End-button? If so you should leave it connected to the charger for longer. If battery has drained too much it takes a while for the device to allow it to power itself up (prevention of overdrainage, which Lithium-batteries don't like very much).
Do you charge through USB, or with the supplied charger? I've had this before trying to charge it with a (different brand) microUSB charger. Turned out most chargers only give out 500mAh, whilst my normal charger (and car-charger) give out 1000mAh i believe. That might help.
You can order a cheap replacement battery from China (i got mine with dockingstation), which is already charged about 60% (for storage purposes).
BTW if your problem is fixed, please add the prefix [FIXED] or [SOLVED] to your topics title.
Click to expand...
Click to collapse
i have restarted many times.
i use the wall charger.
but why would the phone boot but not turn on the screen or have the mic work?
remove your sd card and the battery. you may have to hit the rest button on the back after you plug the battery back in as well, but as long as you have the sd card out it should come back on. try plugging the phone into a charger and then remove the battery as well sometimes it'll wake it up so to speak. it's just a matter of playing with it. mine did the exact same thing and i freaked out for a little bit.
now if after all this it doesn't work and you've played with it for a while then yeah, best of luck to you =\. but whatever you do in playing with the battery and the charger, keep the sd card out until you can boot into winmo.
EDIT: never mind, i thought the phone wasn't booting. i misunderstood, but i went back and reread the original post. try reflashing your rom if you're in winmo and experiencing those issues. or take the sd card out and reboot.
i would suggest making an backup, as your phone turns on you should be able to estaplish a remote-connection with some (3rd-party-)software and do a hardreset.
if this wont work i would recommend setting it back to factory default (revert hspl if you have one and install stock rom) and send it in for warranty.
seems to be some major problem...
All this steps should be possible without screen turning on (working touchscreen may be needed for backup, but flashing doent need screen input)
if drive-mode is default for your usb connection and holding you from flashing you can do a hardreset and afterwards active sync will be default again and you can establish an active sync connection and flash
check if any of the pins that contact the battery are bended or broken, try to avoid removing the battery when you have to reset your hd2 because the pins are fragile
similar thing happened to me just last night!
I tried the jmz dual boot last night and I was nearly out of battery. I didnt look at any instructions I just installed it and restarted the phone to check out the new toy. it finally got done loading I chose android right away and I was walking towards the bedroom. when I went to see if android had fully booted and plug in the phone I had nothing! It was off. I decided that the battery must have died so I tried to turn it on and all that happened was the tmobile flash screen came up for a second and then it went right off, I got so desperate that I was going to do a hard reset but that wouldnt even work! the boot loader screen would just shut right off. I was suggested to try another battery we had at the house and bang it fired right up I took a wiff of my other battery and I dont know what happened but I think I let the magic smoke out cuz it is fried!
chrisizzle492 said:
ok here is the problem.
4 nights ago i forgot to plug in my hd2 while android was running and the battery died.
the next morning i went to turn it on and the screen no longer turns on but the phone does boot. the battery doesnt charge, status light doesnt either, end key doesnt work, when i answer calls no noise can be heard or made.
any hope?
Click to expand...
Click to collapse
hello friend...i have a problem similar to this. basically when my phone is in android which i use alot if it dies in android, when i reboot it it will turn on for about a second to see my splash screen then turn itself off (the battery is obviously flat). so i plug my charger in and it stays on now but doesnt indicate charging....i boot it into windows mobile and the batt just stays at 0% but its still working. however once i unplug it it will die.....its like the battery is not in the phone. luckily i have two batteries and a dock which charges batteries, so i replaced the battery and everything works fine. once the battery that died in android was fully charged i tried it again and it was fine.................im guesing the moral to this story is dont let your phone die in android mode
I do notice my HD2 runs hotter while in android than while it runs in Windows.
I am not sure if that's an issue to this, which is why I never mentioned about it being hotter. Although my HD2 is noticeable hotter, it never gets to a point that I think I should unplug the USB due to overheating concern...
Just a few inputs from passed experience
I use TMOUS Stock 2.13.531.1 WWE ROM
2.12.50.2_2 radio (not stock)
k going to tmobile today to see if they have any extra batteries i can try.
then ill update
i went to tmobile. and while i was there i noticed the screen was turning on but very dim without backlight (barely noticable). but the rep helping me did not notice and i let it stay that way because tmobile is sending me a new refurbished phone as long as i send the old one (and the rep was totally cool he uses xda also and said they wont check my software and if they do they wont ask for the phone back). he also let me get insurance in case this happens again, instead i will just say its lost. so i basically killed 2 birds with one stone

Well, I guess I bricked my HD2

My HD2 doesn't turn on, doesn't go into boot loader, and cant soft reset. Can I officially say i bricked my HD2? And i cant even get it replaced because the camera is somehow cracked, and that supposedly "voids" the warranty.
And Im quite sure you need a JTAG to fix it, correct?
if it was a 51 radio brick, then yea, JTAG is it.
actually, it wasnt a 51. radio brick. I installed the Eugenia Rom through CustomUU while my phone was connected, it installed fine, and then it wouldn't turn on?
wont turn on at all? nothing? black screen? no charge light?
check the battery pins.
Nope, nothing at all. And by checking the battery pins, what should i be looking at?
just to see theyre all in a nice neat line, two one two, none bent up/down. it happens a lot.
other than a 51 radio (or 2.04.50 and 2.05.50 radios), battery pins or a discharged battery are the only reason i can think that would cause complete dead phone.
hm, I think I'm on to something here. When i plug my phone into my computer, it installs a driver. I forgot what its called, but that's all it installs. I cant access the phones files, but i thought i would let you know, maybe it could help me in the long run.
qualcomm? yea, the radio bricks show up as a qualcomm device.
try leaving the battery out for a while, (half hour) then plug in usb (wall charger, not pc) and then put the battery back in. this will stop the phone trying to run on like it normally does when you apply power when the battery is in (thus draining even the dregs of power, possibly affecting the charge circuits ability to start charging, , not very common, but not unheard of either), and with a bit of luck the charge light will appear and all will be well.
gotta go, 3am
good luck.
Thank you so much man,I'll try... ill get back to you about it tomorrow.
Erggg, nope, it didnt work =( Thanks for your time, and thank you for trying to help.
how old is it?
is it warm on the back bottom part of the phone?
Put it in the fridge for 15mins, then try to boot up.
Also see if you can try and put your battery in some one elses HD2 or charge your battery in their phone.
Its pretty hard to kill your HD2.
(i just dropped my HD2 in for a service/repair as my motherboard/cpu was overheating.- had to flash stock rom and spl back though)
I got it two weeks ago Its not warm, but ill try it in the fridge...... and I just did that a couple hours ago, we switched battery's and still no luck.
Refrigerator did not work either =/
can u do a hard reset with the volume up buttons and the power key? reformating the device to default?
Pull out ur battery, press and hold the soft reset button, hile holding down the soft reste button place ur battery back in. While still holding down the soft reset button pres and hold the volume down + the on/off swith and see if it will boot. U might need a friend to help u with holding down al the buttons. It worked for me...
Read ALL the earlier replies. Mine seems "cracked": battery won't charge in phone, via USB cables (2 cables, 2 batteries - one new & fully charged, two USB power souurces, including a car's 12v DC source).
Did all the above hard & soft resets, etc. Nothing works. Phoned HTC AUSTRALIA - MUST send it hundreds of miles (or kms) away to the original Telstra dealer, since HTC does not allow any other type of warranty claim in Australia.
On the phone's pins that contact the battery - they are flexible: up, down, in & out. Being "in-line" does not mean they work.
Not sure why the hardware crashed. Have not upgrade ROM or Android. Won't recharge the battery in-phone with SIM, micro-SD in nor out of the phone.
Wanting for a separate external battery charger (only a few $$) from eBay. Might take the phone to a dealer, and see if they can get it to recharge the battery via the USB cable.
rbadal said:
Pull out ur battery, press and hold the soft reset button, hile holding down the soft reste button place ur battery back in. While still holding down the soft reset button pres and hold the volume down + the on/off swith and see if it will boot. U might need a friend to help u with holding down al the buttons. It worked for me...
Click to expand...
Click to collapse
nope, didnt work

[Q] Potential brick? Device not powering on

Hi all, i have a ZTE blade which i have rooted and flashed CM 7.0 successfully without upgrading the radio to GEN2. I've done this and much more without problems, however today for some reason the phone isnt even powering on. The only thing i did before was installing theft aware 2.0. Note that i dont have a SIM card inserted so it's unlikely that someone have sent a command that turned the phone into a... vegetable.
I tried removing the battery and trying to turn it on, nothing. I tried connecting it to the USB power charger without a battery, still nothing. This phone is supposed to be a birthday gift for my friends 30th birthday, so i'd really appriciate help getting it back to life.
Thanks in advance
EDIT: I've tried the following: with ADB devices the phone dosen't show up.
Trying entering field test mode with VOLUME DOWN + POWER key does not do anything. same result with VOLUME UP + POWER.
Tried different USB cords without success.
Have you tried holding volume up & down together along with the power button. Make sure you have the usb cable connected from the phone to a pc. So long as you have the zte drivers, it should show up in DFU mode in device manager (from what I remember).
I think from there you can flash recovery using fastboot again.
I tried that, nothing happens. Thing is, the phone dosen't give any kind of life signal at all, not even the button backlights turns on during charging. Could it be that it suffers from a hardware defect? Or is there more things i can try?
Yeah sounds like you may have a hardware issue; especially if none of the LEDs flicker on when trying the above.
hmm, ....out of ideas for now fella.
Any news on this?
I am having the exact issue, phone is like a real brick:
- Won't do anything when trying to press power and/or any other buttons one by one or at the same time
- Won't do anything with or without battery
- Won't do anything when pluging it to the USB/Charger, not even a led response
- I've tried with and without sim, with and without sd card, trie everything and still nothing, seems complketely without any kind of life inside. The only thing it does is get heat when you put it to charge with battery
I had it with cyanogen 7, max overclock to 710mhz, min arround 200, and it happened (turned off) 5 minutes after I installed Launcher Pro...
Any ideas?
Gotnov said:
Any news on this?
I am having the exact issue, phone is like a real brick:
- Won't do anything when trying to press power and/or any other buttons one by one or at the same time
- Won't do anything with or without battery
- Won't do anything when pluging it to the USB/Charger, not even a led response
- I've tried with and without sim, with and without sd card, trie everything and still nothing, seems complketely without any kind of life inside. The only thing it does is get heat when you put it to charge with battery
I had it with cyanogen 7, max overclock to 710mhz, min arround 200, and it happened (turned off) 5 minutes after I installed Launcher Pro...
Any ideas?
Click to expand...
Click to collapse
I actually gave up and sent it in for service which returned me a brand new one. I suspect that ZTE dosen't have much of quality controls since a friend also suffered a case of "true-death" on her unmodified ZTE blade...
Similar issue here. If I press the power button (with or without any combination of other buttons) it just vibrates - no lights, display or sound. Doesn't power on so no fastboot/adb etc. Same behaviour with battery, charger, or both. If I hold the power button the vibration sort of pulses, a vibration every 0.75 seconds or so. I recently opened it up to get dust out from behind the screen, so no warranty :-(
Will ask at the shop what the options are for maybe paying for a repair..
richardkemp said:
Similar issue here. If I press the power button (with or without any combination of other buttons) it just vibrates - no lights, display or sound. Doesn't power on so no fastboot/adb etc. Same behaviour with battery, charger, or both. If I hold the power button the vibration sort of pulses, a vibration every 0.75 seconds or so. I recently opened it up to get dust out from behind the screen, so no warranty :-(
Will ask at the shop what the options are for maybe paying for a repair..
Click to expand...
Click to collapse
Your issue is different than the one i had, you phone is at least being powered on since its vibrating.
Most likely you broke when you opened it or you simply didn't reassemble it correctly - if i were you i'd do it again and check that all the connectors are connected.
If its a software issue, you can always try TPT - total phone transfer. google it, i read it but didnt try it myself so i cant vouch for how it works.

Is my phone done for? (Cant bot/charge/enter download mode/no response)

So few days ago my phone suddenly turned off and kept rebotting itself (It would reach the samsung galaxy logo and then turn off). I thought it was a battery issue so I removed it for 30mins and tried again, worked fine for an hour then problem started again. I left it over night to charge in the wall socket incase.
Same issue next morning and no solution.
I replaced the battery with a friends and the same issue happened on my phone (i used my battery on his and it works fine on his) so I removed the issue of battery itself.
That evening the phone then just stopped responding at all. It would not respond to pressing the power button (no load, no vibration).
Tried entering download mode using vol down + home + power. Nothing. (So cant use Odin)
Tried entering recovery mode using vol up + power. Nothing
Tried hard reset using vol up + power + home. Nothing.
(All the steps I used a fully charged battery from another s4 phone and removed/re-entered before trying again)
So I check online and notice some people having issues with power button, but even if that is the case - wouldn't my phone still charge? I dont even get the battery chargning icon on the screen when plugged in either PC or wall socket.
I opened it up and changed the motherboard with another samsung s4 and my original problem mobo still does not load on the new s4. (My new mobo worked on the old device though).
The ONLY response I got was when I used my original mobo on new s4 device and plugged it into PC, it popped connect and then disconnect sound and thats it (doesnt recognize usb port).
What are my options apart from getting another motherboard or going to a shop for a JTAG repair? I was contemplating just removing the power button and seeing if that helps in getting a charge response lol
Well your power button is broken for sure. Replace it and then test it.
Lennyz1988 said:
Well your power button is broken for sure. Replace it and then test it.
Click to expand...
Click to collapse
Wouldn't the phone still recognize charging even if the power button is faulty?
penguness said:
Wouldn't the phone still recognize charging even if the power button is faulty?
Click to expand...
Click to collapse
It always takes a few seconds before it starts to charge. So maybe the device reboots before reaching the charging phase. I'm guessing though. But since your problems started with power button issues it would be the logic place to start.
The part only costs a few dollars.
Well I'm exactly in the same situation as you, since this morning on a i9505 running JFLTPE-GPE 5.0 ROM. The screen appears for 1 second or 2 (Samsung logo) then it powers off . I need to remove the battery to try something else.
Same behaviour, even for recovery mode, so Odin is not an option.
I thought that changing some kernel settings have caused that, but as I just put them back to default values, it should not happen.
I didn't have some power button issues, it was just powered off at my wake up this morning. In your case, does your phone vibrate and power up instantly when you put the battery ? That's the case for me, but it should not be the normal.
My problem is actually solved : indeed, it was the power button. I removed all the screws and played a little with this power button (air dust, etc...), enough to make it start correctly !
I managed to do some backups, and now I hope that it won't break again.
Calicodesiles said:
My problem is actually solved : indeed, it was the power button. I removed all the screws and played a little with this power button (air dust, etc...), enough to make it start correctly !
I managed to do some backups, and now I hope that it won't break again.
Click to expand...
Click to collapse
Yeah, that happened before (automatically powering up, vibrating, going to samsung logo and then shutting down and doing it again until I removed battery - putting the battery back in with start it up without pressing the power button).
When it was in that phase, the one thing that did work was doing a soft reset (home+power+down vol, and then holding just power) - however that only worked for like an hour before it went back to the restart phase.
However now it doesn't respond to anything at all. (Any kind of response I got was when I put that mobo in another s4 and plugged in usb, which just gave a connected/disconnect sound on w7, no life on the phone itself).
Be very careful as to what you do, I suggest you do NOT leave the battery on it and charge it (which was the last thing I did before it went unresponsive) - my guess is phone went haywire trying to turn on/off continously.

Samsung Galaxy S7 Edge Not Turning On

Hi people.
So i'm having a problem with my S7 Edge and i don't think it is common. A few weeks back I was using my phone and it would suddenly turn off and the battery would be drained too. After this first incident with the problem it happened more often, and the phone would start doing boot loops to the point where the phone just froze and turned off. When these problems occured it will usually need to be a problem where I do a safe boot (Volume up, Home button and power key), and everything will be fine (or to charge it if the battery drained), but recently, the phone just didn't work at all, to the point I waited for the battery to drain (10 hours), and try charging it, nothing happens.
So firstly I was watching a video and checking my CPU/Battery tempretures to see if that was the problem (the tempretures at the time were around 31 degrees), and mid way through the video it bugged out through the audio in a high screech and turned itself off.
I tried turning it on again but no response to the screen, i tried safe booting it, or every alternative booting option, it did not work at all.
Here is all the diagnostics and repairs I did, but no luck:
- Tried turning it on
- Different boot options (Volume up/down, Home button & power key)
- Cleaning the port for moisture detection
- Replacing the battery for a new one (Genuine one)
- Doing all of the above, with it on charge
- Connecting to a PC, but no detection
One positive I found was that when i put the phone on a wireless station, it would change colour to show that the phone is charging. I have however took the wireless out of the phone as it was in the way of the battery, and safely in my draw.
Before this final fault happened, I did do a recovery to a previous Android version, just incase if it was a software fault, but it wasn't. The phone is not rooted and I had it since September of 2016.
Is there any alternative options to do? As i'm running out of ideas to do as every solution on the internet is to turn it on, which i can't whatsoever.
The warranty is voided also as there is a crack on the screen lens, and it's way too much to pay for a repair.
I need some explination of why this is happening, so I can go in the right direction and not to waste money if i was going to a repair service, or purchasing the parts for myself.
Any help would be highly appericiated.
Check your installed apps to see if there any viruses on your phone. All you said are signs that your phone might have a virus (check how to remove it here: https://www.unlockunit.com/blog/how-to-tell-if-your-phone-has-a-virus/
However, there is a chance that you do not have any viruses on your phone, but at least you have to isolate this possibility.
Did you recall installing any app prior to this behavior?
This may be the case, however i can't turn on the phone at all. I tried every possible reboot possible, download mode, bios mode, safe boot, reboot, but nothing happens unfortunately. Unless i can do it whilst it is turned off, i can do something. I have a PC if i can do anything else with it.
I don't think I have installed any weird apps on the phone.
sounds like a brick to me. Not a lot I can thing of you can do.
If you place the wireless card back in does it boot?
IT sounds like you've messed with the internals, so possible you damaged something?
I don't particularly think that I broke it from the inside as it was behaving the same before i opened it. And when i used the wireless charging, it will only indicate it was charging or getting detected on that charging pad and not on the phone regarding a red led, or the charging icon
Have you tried holding volume down + home + power for 15 seconds and try turning on the phone again?
As mentioned in the description, I have unfortunately
MOweenSalah said:
As mentioned in the description, I have unfortunately
Click to expand...
Click to collapse
Have you had any luck? Am in the same boat.

Categories

Resources