Database Users

[Q]How to flash back to stock with no USB?

I have a problem with mounting my phone in Windows (see here; http://forum.xda-developers.com/showthread.php?t=841645) and I need to return it for testing.
How can I flash it back to stock without a USB connection?
E.E.

Assuming you're rooted and on a custom ROM
You will need unlimited data to try this.
Not sure if this will work, but please do try.
1. Make sure your phone is juiced up.
2. Download the Stock RUU you want from the internet - save to your sdcard
3. Download another sense based ROM that you has no issues with the USB cable - check the post and changelogs.
4. Perform rom backup with ROM manager (get from android market)
5. Wipe and flash new Sense based ROM on your phone.
6. Once your phone is booted, the USB SHOULD WORK.
7. Move RUU to your PC. Link to HTC sync - phone should be set to sync.
8. Install RUU.
And once it is one, you have unrooted and are back to stock ROM.
Should your USB fail at stage 6, you should try a different custom ROM.
If it's still not working, you might want to search how to USB unbrick (i think there's something like that on the forums).

Unfortunately its not a rom problem. The USB issue seems to be a hardware problem.
I have flashed multiple different backups from CM6 to myvery first backup I made of the newly rooted rom.
I just need to put a stock rom on it so that I can get warranteed service. Otherwise I'm pretty sure they'll just shoot it back to me, marked warranty void.
E.E.

Have you tried this?
It's to unbrick your usb
http://forum.xda-developers.com/showthread.php?p=7616115#post7616115

I had also problems with mounting USB, can't tell if they were the same as I don't use windows and can't tell how it behaves. My problem was solved after I flashed the rooted vodafone FroYo. Maybe this could help you, too.

I haven't tested it yet but it may be as simple as downloading the zip from shipped-roms.
(http://shipped-roms.com/download.ph...35.21_release_130330_signed.zip&send_file=yes)
Renaming it to update.zip and flashing it from Recovery.
Can anyone confirm?
E.E.

Actually the best solution I've found yet is this one here from the CM forums.
This using the .img files from the zip I downloaded from Shipped-Roms earlier
Instructions
---------------
1. Boot n1 to fastboot mode
2. Extract the FRG33 files to your tools directory in PC (you need system.img and boot.img)
3. In your tools directory, fastboot the following commands
fastboot flash system system.img
WAIT
fastboot flash boot boot.img
WAIT
Reboot
Alternative method
------------------------
Rename the stock file to passimg.zip
Now you need to use ADB to get it on the SD card, or just copy file to sd card root directory
Command: adb push passimg.zip /sdcard
Now get into the bootloader and it should detect the passimg.zip file and ask if you want to install it.
Click to expand...
Click to collapse
Since I have Fastboot available to me, this seems the most hopeful method.
Can anyone confirm is this not just hopeful thinking?
E.E.

[Q] Stock ROM without HBOOT etc. (FM Radio)

Sorry for the newb-ish question. I'm in a mad rush to build my FM app and would prefer not to have to research this issue for hours.
I have my FM app running on Blayo ROM, using btipsd_cli, and I think it should then work on the stock ROMs. AFAICT they also include btipsd_cli.
So I want to test on a stock ROM. Which one should I use ? I'm avoiding the RUU's because I don't want to have to mess with Windows etc.
So I'm looking at: OTA_Legend_Froyo_S_Vodafone_UK_3.14.161.1-2.05.161.1_R_P_release_135177_156984k4i146wit81sj23a.zip
But the embeded firmware.zip includes an HBoot and radio and recovery.
I don't want to lose my S-Off, or my CM recovery.
Can I do this ? What's the easiest/safest way ? Or any other stock ROM I should use ? Perhaps I should test with the oldest ROM and the newest ROM.
Thanks much !

Sure m8. Just extract whichever img you want and flash it via fastboot. I'm not sure about system.img. Some guys reported that flashing system.img doesn't actually work. In that case put it on /sdcard, fire up CWM, format system partition, mount it and then inside adb shell unyaffs the image into /system dir.
EDIT: Ahh one more thing. You can't just install any OTA you want. What OTA does is binary patching of existing files. That said it means you have to have binaries that actually match to their patches but I guess you knew that before
Sent from my HTC Legend

BlaY0 said:
Sure m8. Just extract whichever img you want and flash it via fastboot. I'm not sure about system.img. Some guys reported that flashing system.img doesn't actually work. In that case put it on /sdcard, fire up CWM, format system partition, mount it and then inside adb shell unyaffs the image into /system dir.
EDIT: Ahh one more thing. You can't just install any OTA you want. What OTA does is binary patching of existing files. That said it means you have to have binaries that actually match to their patches but I guess you knew that before
Click to expand...
Click to collapse
Thanks BlaY0 !
No I didn't know about the patching of files. So that's what the *.p files are for... Yuck, that's messy IMO.
I WOULD have known if I spent much time in this area but I haven't. A few months back I finally had my phone in a nice state and haven't looked back. It was VERY painful doing all that, and at least twice I messed up badly and had to restart. So I don't want to repeat that.
I haven't figured out how all the partitions/image files interact, so I won't go down that road at this time. I'm guessing it may not be possible to go back to stock temporarily and then revert to the other ROMs easily.
So for now I think I'll continue to use your ROM as a proxy for a stock ROM and hopefully my app will work as well on stock ROMs. BTW, I'm now running your new 8.4 and it's working very nicely thank you...

Those .p files are standard bsdiff patches. At least they should be, but HTC once again made some internal changing to that so I was unable to manually apply those patches on my PC.
If you are S-OFF which I believe you are, all you have to care about are boot.img and system.img. 1st is image made of kernel + initrd and 2nd is basically yaffs2 image. 1st can be flashed with flash_image and 2nd can be unpacked with unyaffs (after you format system partition and mount it on /system via CWM). All needed tools are available in CWM recovery and they are also part of AOSP and are compiled separately each as its own bin. Flashing can also be done via fastboot, but I'm not sure about HTC's system.img as I'm not S-OFF. You should try that.
Sent from my HTC Legend

Noobie Question about ICS

I can't post in the development forums so I figured I would ask here:
I understand how to use adb and fastboot, etc.. What I am missing is with the new ICS ROM it states that I must "fastboot flash system system.img"; however none of the ICS zip file I have seen come with a system.img file (just the boot.img).
Am I missing something? Any help would be greatly appreciated..

I used the version available on Rootzwiki... not sure if thats the answer you wanted. I'm running 4.0.3 ICS on my wifi XOOM OC to 1.54. No FC's, reboots or anything of the sort. You'll need to be sure that you have su-install.zip, and other img files needed. As I said, you'll find them all on the rootzwiki website under xoom hope this helps, if not good luck.

You are talking about two different things here. I don't know where to start here you're all mixed up. There are several ways to flash a ROM, you can fastboot flash the .img files such as what you are referencing to. Or you can flash an update .zip file from recovery. The way you flash the ROM depends on the source, if its a bunch of *.img files you use fastboot, if it's a *.zip file you use recovery. Just follow the directions given for installation that are provided with the ROM you are downloading.

sboehler said:
I can't post in the development forums so I figured I would ask here:
I understand how to use adb and fastboot, etc.. What I am missing is with the new ICS ROM it states that I must "fastboot flash system system.img"; however none of the ICS zip file I have seen come with a system.img file (just the boot.img).
Am I missing something? Any help would be greatly appreciated..
Click to expand...
Click to collapse
Hello, and welcome to XDA! =] Anyways on with your question. There are two ways to flash a ROM to your xoom. One being fastboot/adb, where you use the command line on your computer to send commands to your device and make it do stuff. This is where you use system.img, boot.img, recovery.img.
The second, is CWM (ClockWorkMod recovery) This, as far as im aware, is the most common way. This is where the .zip's come in. Because you take the .zip you put it on your external SD card. boot into recovery (after flashing CWM of course) and flash the rom. CWM is nice because you can also make a 100% snapshot of your internal memory state via making a nanodroid back up. That way if anything messes up you have a 100% backup you can restore at anytime if you need it.
In a nutshell, You use *.img files with fastboot and .zip files with CWM.
Anyways. If you're new to rooting. Please check out these two threads, They'll help you get started. =]
Xoom Heaven: Root+Non Root Users Are Welcome!
[Guide] Setting up and using adb/fastboot-unlock, flash custom recovery & root
The second guide I did use to flash my own zoom so I can assure you it does work.

MOTOACTV ROMs

Rooting and updating your MotoActv is about to get significantly easier! No more waiting games for developers to update their ROMs or tools when Motorola pushes a new OTA; now you can do it yourself! I honestly have not seen these types of files ANYWHERE else, so I had to create these myself (with quite a bit of help from [mbm]). But enough blabbing, here are the files and how to use them:
(Note: all these methods assume we have full fastboot access! -- Which we still have at this point)
- Stock Images:
These are not just mere update.zips that you might be accustomed to elsewhere in Android. Nor are these mere fxzs that you might be accustomed to elsewhere with newer Motorola devices. They are in fact both and more. There are 3 main ways to flash these files onto your device, giving you options based on what OS you run and how comfortable you are flashing files to your device.
1) FXZ:
- Operating System: Windows
- Requires: RSD Lite with FXZ Support
- Instructions: Simply load up the file as any standard fxz (it is very straight-forward)
2) Recovery:
- Operating System: Anything that can mount your device
- Requires: The ability to get into recovery
- Instructions: Place the file on the sdcard, boot into recovery, flash as normal
- Note: Recovery does not wipe your device, it is suggested that you do so before flashing stock images
3) Fastboot:
- Operating System: Windows/Linux/Mac
- Instructions (Windows): Unpack the zip, run flash-all.bat (if it fails, run as administrator)
- Instructions (Linux/Mac): Unpack the zip, run flash-all.sh (it should already have proper permissions)
Miscellaneous Images:
These miscellaneous images are nothing you haven't seen before at this point, but their purposes are new, so they too require explanation.
1) AnyRoot:
AnyRoot is based on koush's AnyKernel in the sense that it unpacks and repacks the boot.img on the fly. However, as the name suggests, AnyKernel is meant for kernels, while AnyRoot, actually roots the device on the fly. This will work on any MotoActv device. It is flashed as a normal update.zip and everything is done in the background so you won't noticed much. However, for ease of access, the stock and rooted boot.img is exported to your sdcard in /sdcard/recovery/. Also note, that if you happen to flash AnyRoot over an already rooted device, nothing will happen as it has built-in error checking.
2) rebootRecovery:
rebootRecovery is another fxz type zip, the same as the stock and rooted images, except it can't be flashed in recovery (would be a little redundant don't you think?). This flashes a specially made misc.img by [mbm] that tells the device to reboot into recovery from boot. This means you can flash AnyRoot on any stock device.
How Tos / FAQs:
Now that you know what the files do, I can explain in short steps how to use these files to get what you want:
1) How to Return the Device to Stock?
- flash a stock image using any of the 3 methods
- you can now update via Motocast if you so wish
2) How to Root a Stock Device?
- update your device via Motocast to the latest version (suggested)
- place AnyRoot on your sdcard
- boot into fastboot, and flash rebootRecovery using either of the 2 methods
- flash AnyRoot in recovery
- reboot
3) How do I update my Rooted Device?
- flash a stock image using any of the 3 methods
- update your device via Motocast to the latest version
- place AnyRoot on your sdcard
- boot into fastboot, and flash rebootRecovery using either of the 2 methods
- flash AnyRoot in recovery
- reboot
Q: After using rebootRecovery I can't get out of recovery!?
A: You are using an old recovery that doesn't clear the 'reboot-recovery' command; use the newer recovery: https://dl.dropbox.com/u/5849675/android/f100/CWMR5x_F100_recoveryB2.img
Q: What do these ROM offer over other custom ROMs?
A: Nothing, they are simply stock images, but you can upgrade with them.
Q: How much battery should I have when I flash?
A: Performing any kind of these flashes will drain at least 10% of your battery, I wouldn't suggest you flash below 60% ESPECIALLY IF YOU FLASH rebootRecovery!
Q: What happens if I flash a 16gb zip on my 8gb or visa-versa?
A: Don't freak, it will still boot, but it's not the best thing in the world to do, just go back and flash the correct model zip.
Q: Can I extract the images from your zips and flash them my own way?
A: yep (couldn't really think of anything else to say)
Q: I manually flashed the stock-boot.img from AnyRoot, and now I can't update. Why?!
A: The boot.imgs need to be truncated before they can be flashed to correctly work with Motorola's updates, just use the stock images.
Q: What's next?
A: HyprActv -- What's this?
Stock Images (w/ md5sums):
8gb-NA: https://dl.dropbox.com/u/5849675/android/f100/MA_1710_8GB_NA.zip (5e228bf56a67aced012c8cbb2d7f7c76)
16gb-NA: https://dl.dropbox.com/u/5849675/android/f100/MA_1710_16GB_NA.zip (21b067dc629f7ccd18b43799d8d5fb17)
8gb-EU: https://dl.dropbox.com/u/5849675/android/f100/MA_1710_8GB_EU.zip (5b79a46d87728303fc2c920eec71c2e8)
Miscellaneous Images (w/ md5sums:
AnyRoot: https://dl.dropbox.com/u/5849675/android/f100/MA_AnyRoot.zip (2f867b006da42865ef861094db0eb6e6)
Reboot Recovery: https://dl.dropbox.com/u/5849675/android/f100/MA_RebootRecovery.zip (1623c9c61462db9bb20b55bc8f1144aa)
Mirror (thanks Iownox!): http://www.androtransfer.com/?developer=lownox&folder=MotoACTV

This is Reserved.

I rooted and flashed in recovery (the stock 4.55.97 and the the rooted version 4.55.97) and I stay on 4.55.78 no matter what! The flashes go through successfully... But nothing has changed and the System version still says 4.55.78... But like I said, the flashes both completed! I did a factory reset... and the updater-script wipes system, so what could be my issue?

Moose8106 said:
I rooted and flashed in recovery (the stock 4.55.97 and the the rooted version 4.55.97) and I stay on 4.55.78 no matter what! The flashes go through successfully... But nothing has changed and the System version still says 4.55.78... But like I said, the flashes both completed! I did a factory reset... and the updater-script wipes system, so what could be my issue?
Click to expand...
Click to collapse
It sounds like you flashed that old boot.img. Do you have the battery percentage in the status bar? According to TheEndGame7 that is another surefire way to tell if you are on 4.55.97, if you used any of the root tools, it's possible that they automatically flash the old boot.img.

CEnnis91 said:
It sounds like you flashed that old boot.img. Do you have the battery percentage in the status bar? According to TheEndGame7 that is another surefire way to tell if you are on 4.55.97, if you used any of the root tools, it's possible that they automatically flash the old boot.img.
Click to expand...
Click to collapse
I think I did flash the old boot.img (root tools :O ). I'll try flashing the modified boot img again. Thanks! I had no idea the root tool took me back to the old boot img

Moose8106 said:
I think I did flash the old boot.img (root tools :O ). I'll try flashing the modified boot img again. Thanks! I had no idea the root tool took me back to the old boot img
Click to expand...
Click to collapse
Yes, any and all tools that exist so far will need to be updated.

I wiped data / cache and used recovery (b) to install the rooted-4.55.97 zip and didn't have any luck either. I did not use the root tools to flash. Also wiped dalvik cache after and fastboot -w for fun.

innovatelife said:
I wiped data / cache and used recovery (b) to install the rooted-4.55.97 zip and didn't have any luck either. I did not use the root tools to flash. Also wiped dalvik cache after and fastboot -w for fun.
Click to expand...
Click to collapse
Did you end up doing any restore of some kind after you flashed?

Update
There are "new" instructions that might fix the issue where the rooted 4.55.97 appears to not flash. Simply wipe the boot.img image before you flash. And don't use the root tools until they are updated.
Also, if you have success, please post it. Usually "Thanks, it works" is annoying, but in this case where I don't have the device, I need to make sure this is working on some level.

I formated everything from recovery, now I got stuck with Moto logo with no animation when it starts, how to get out of this?
NA

Is there any mirrors for the download of these roms? the dropbox links are down

NORCALkID said:
Is there any mirrors for the download of these roms? the dropbox links are down
Click to expand...
Click to collapse
They were pulled, they're not working. There has been some form of mis-communication when I did my testing. I am not working on these until I can get the device from utkanos. Check Update 2, in the initial post.

Success
CEnnis91
I was lucky the second time, first time I succeeded to upgrade to rooted 4.55.97 but for some reason I didn't get the battery percentage on the status bar but all other issues are OK and status indicated version number 4.55.97, I repeated flash from recovery but after wiping and remounting all folders, this time for stock 4.55.97
Now I'm on stock 4.55.97 with battery percent on status bar and syncing from my mac.
thanks CEnnis91
NA

I went into recovery>mounts, and didn't see any wipe for boot. I took a shot at system since I had already wiped cache and data. Didn't seem to help either. Tried 'fastboot erase boot" and re-flashed. No go. Couldn't start back up the device at all. Tried flashing the latest rooted image using "fastboot flash boot boot.img". No go.
I messed around trying to get the device to boot back up for a while, but it won't even charge right. Only charges long enough to kick off the Motorola 'M', and that is it. On attempts at loading fastboot, I just keep getting an error saying that the battery is low. I know I can only blame myself for this. No fastboot access and no adb access. All attempts at resetting the device have failed.
Before I attempted all of this, my battery was full. Unfortunately, wouldn't charge anymore even plugged into the wall. Any ideas?
Hopefully nobody else makes my mistake.

Man I can't wait till this is perfect, you guys are fricken awesome. I raped your thanks buttons op lol
MoPhoACTV Initiative

Will be working on this tonight. I just found out how to make the flash script clear cache and dalvik for you, pre-install. That'll probably save some headache, but it works only in edify format. Not sure what the stock recovery uses...
Anyways, I'm home!

ClearD said:
Will be working on this tonight. I just found out how to make the flash script clear cache and dalvik for you, pre-install. That'll probably save some headache, but it works only in edify format. Not sure what the stock recovery uses...
Anyways, I'm home!
Click to expand...
Click to collapse
All recoveries will now use edify, amend is old and depreciated, you will only find that on old devices.

Corrupt Kernel...
innovatelife said:
I went into recovery>mounts, and didn't see any wipe for boot. I took a shot at system since I had already wiped cache and data. Didn't seem to help either. Tried 'fastboot erase boot" and re-flashed. No go. Couldn't start back up the device at all. Tried flashing the latest rooted image using "fastboot flash boot boot.img". No go.
I messed around trying to get the device to boot back up for a while, but it won't even charge right. Only charges long enough to kick off the Motorola 'M', and that is it. On attempts at loading fastboot, I just keep getting an error saying that the battery is low. I know I can only blame myself for this. No fastboot access and no adb access. All attempts at resetting the device have failed.
Before I attempted all of this, my battery was full. Unfortunately, wouldn't charge anymore even plugged into the wall. Any ideas?
Hopefully nobody else makes my mistake.
Click to expand...
Click to collapse
This is a classical case of a corrupt Kernel. Not that the images are corrupt, but somewhere along your update, your boot.img did not install the kernel properly and now you have a broken power manager within kernel.
What I would do is the following:
Hook your watch to the charger and let the M sign show up.
Even if it hangs on the M, leave your watch hooked over night.
Try downloading an older image and use fastboot to erase everything and then flash everything back again. This should return your watch to a working state again.
You may then choose to customize it as you see fit.

Root tool > "return to stock"
Sent from my HTC Inspire 4G using XDA-funded carrier pigeons

simx said:
CEnnis91
I was lucky the second time, first time I succeeded to upgrade to rooted 4.55.97 but for some reason I didn't get the battery percentage on the status bar but all other issues are OK and status indicated version number 4.55.97, I repeated flash from recovery but after wiping and remounting all folders, this time for stock 4.55.97
Now I'm on stock 4.55.97 with battery percent on status bar and syncing from my mac.
thanks CEnnis91
NA
Click to expand...
Click to collapse
I'm about to try this.. but it's making me think... Do you think the updater-script doesn't correctly format system? Think about it... our devices say 4.55.97 (mine changed to that after a reboot or two), and we only had partial features... sounds like something isn't wiping correctly.

[Q] What can I do with system dump?

Can I recover my dead SG5 with system dump via CWM?
What can I do with it?

It is far from clear what you want to know?
You didn't say what happened to your phone, why it is "dead" or exactly what you mean by dead. CWM is a custom recovery but you didn't even tell us if you had it instlaled and therefore presumably have backups. Or if you are hopeful that CWM will fix your unspecified problem. And system dump is a vague term usually referring to making a backup on the command line using the dd utility.
We need a lot more information if you need help with something. Such as what happened to your phone, whether it boots to recovery or download mode, loads an ADB shell and so forth.
.

fffft said:
It is far from clear what you want to know?
You didn't say what happened to your phone, why it is "dead" or exactly what you mean by dead. CWM is a custom recovery but you didn't even tell us if you had it instlaled and therefore presumably have backups. Or if you are hopeful that CWM will fix your unspecified problem. And system dump is a vague term usually referring to making a backup on the command line using the dd utility.
We need a lot more information if you need help with something. Such as what happened to your phone, whether it boots to recovery or download mode, loads an ADB shell and so forth.
.
Click to expand...
Click to collapse
[Q] Somebody give me SCL23's build.prop(original)
I changed build.prop
My android phone is SCL23
AKA Galaxy S5
I am Korean but now I live in Japan for work.
So I used GalaxyS5 for KDDI AU
Some application didn't work on my phone.
Even impossible to install
So I tried to root. Then changed model and vendor from GalaxyS5 to Galaxy S4
But it didn't work for using those apps
So I copy all of texts of build.prop of GalaxyS4.
Then my phone dead.
AU's logo is the only thing I can see.
Before did that
I had do googling and find SCL23's CWM with Chinese letters.
It works well.
Factory reset? YES
Boot? NO
Can not normal boot
Odin mode
I connected phone to PC.
Fail to install USB driver.
I think it cause of phone's hardware and build.prop is not same.
I have external SDCard.
Odin work via USB
And I can go into CWM recovery mode.
So I think if I can find .zip, able to flash, of SCL23's build.prop
I can copy it into extsdcard with friend's android
Then go into CWM and flash it.
I need SCL23's build prop
And somebody make it .zip please
I don't know how to make it.
Please help me.
And thank you for read this poor English

fffft said:
It is far from clear what you want to know?
You didn't say what happened to your phone, why it is "dead" or exactly what you mean by dead. CWM is a custom recovery but you didn't even tell us if you had it instlaled and therefore presumably have backups. Or if you are hopeful that CWM will fix your unspecified problem. And system dump is a vague term usually referring to making a backup on the command line using the dd utility.
We need a lot more information if you need help with something. Such as what happened to your phone, whether it boots to recovery or download mode, loads an ADB shell and so forth.
.
Click to expand...
Click to collapse
I wrote it few days ago.
Nobody replied to me.
So I thought many ways and did googling for recover.
I found link of system dump of SCL23.
So now I want to know about what can I do with it for my android phone's revive.
Please help me

If you have a system dump made while your phone was working properly, you can simply restore that to resolve your problems. It's not clear that that is the actual case though.
In the alternative, the apparent cause of your problems is a non-viable build.prop. You should be able to boot to CWM and then use a ADB shell under CWM to rename or delete /sideload the bad build.prop file and replace it with a good copy. If you didn't keep a good copy, you can download the stock firmware for your phone and use winrar to extract the proper stock build.prop for your phone.
More than likely, if you can boot to recovery mode, then you will be able to boot to download mode as well. So Odin use should be possible. You can use Kies to install a driver. But try CWM first.
.

fffft said:
If you have a system dump made while your phone was working properly, you can simply restore that to resolve your problems. It's not clear that that is the actual case though.
In the alternative, the apparent cause of your problems is a non-viable build.prop. You should be able to boot to CWM and then use a ADB shell under CWM to rename or delete /sideload the bad build.prop file and replace it with a good copy. If you didn't keep a good copy, you can download the stock firmware for your phone and use winrar to extract the proper stock build.prop for your phone.
More than likely, if you can boot to recovery mode, then you will be able to boot to download mode as well. So Odin use should be possible. You can use Kies to install a driver. But try CWM first.
.
Click to expand...
Click to collapse
I tried everything you told to me.
But very problem is install USB driver.
Kies failed to find and install USB driver. It worked well before I did it.
So I can not do anything with ADB commands because of USB driver.
But only Odin work to phone.
So I can install CWM. And I can go into CWM recovery mode.
Of course I can go to Download mode.
Can I do something with Linux?
Can I mount My Phone with Linux without install USB driver and then change build.prop.bak to build.prop?
I really appreciate to your reply.
Thanks to your kindness.

If your USB driver was properly installed before the problem, it will continue to work just fine, at least for CWM mode. Build.prop will not interfere with that. So just go to the CWM command line and use the ADB commands to push (replace) the build.prop file.
Are you certain that Odin doesn't recognize the phone in download mode. Ensure that you are entering download mode by removing the phone battery, replacing it, then pressing and holding in order, the volume down, then home, then power key until you see the screen light up. Odin should see the phone and it should not matter if the build.prop file is corrupt. Only the normal boot will be affected by that.
If you have problems connecting ADB or Odin, a far more likely suspect is a bad USB cable. Try a different cable or USB port. And ensure that you are entering download mode in the manner described above. When Odin recognizes your phone, you can write a stock firmware image to you phone to recover.
I haven't used CWM for quite a while (I much prefer TWRP), but it should offer you a command line. So as an alternative, use your PC to write a good copy of the build.prop file to your SD card. Then in CWM you could mount the external SD card, then copy the file from the card to your system directory. In this method, you wouldn't even require the USB driver.
You have lots of options and there are lots of ttutorials on using CWM, ADB and so forth if you need elaboration. You should certainly be able to resolve this issue even though it may be a pain in the neck or somewhat intimidating if it is unfamiliar territory. Nevertheless you can fix it if you are patient.
If the worst case,an alternative would be to pay a cellular repair shop to do the software repair for you. Entirely up to you which is the better approach.
.