bigger font size to read SMS? (in the Sense) - HD2 General

Is it possible to have bigger fonts size to read SMS in the Sense (I know how to make it in windows mode). Any cab or registry mod? Thank in advance.

Went searching the registry and found an obvious entry. Changed the default setting of 2 to 5, soft reset and I no longer have to squint my eyes !
HKLM\Software\HTC\HTCMessaging\Fonts\FontScale
A word of caution to those with huge amount of sms. I suspect it may cause lagging with the increased font size.

Open a SMS, menu -> font size?

Related

One nice tweak for the Xperia

The menues in like Outlook are incredible small, use this tweak from the Diamond tweak thread to make them more finger friendly
HKEY_LOCAL_MACHINE\system\gwe\menu\popfnt
and change the value for the "Ht" entry to "1000" decimal
Now I just need to change the startmenu for it is also incredible small - and the HTCenlargestartmenu cab available makes the start menu funny on Swedish OS. In English OS I am sure it will work fine and it also sets the menues bigger like in the regtweak above
Cheers! This is just the sort of thing we'll need once we start getting our X1's :]
You can make it a lot easier if you use SK-Tools. You can make a lot of changes including the font-sizes. No need for manual changes and it has a set-back-function, if I remember well. I used it for my G900 too, which has WVGA too at the same size
pf said:
You can make it a lot easier if you use SK-Tools. You can make a lot of changes including the font-sizes. No need for manual changes and it has a set-back-function, if I remember well. I used it for my G900 too, which has WVGA too at the same size
Click to expand...
Click to collapse
Can it also make the startmenu bigger ?
where to get english os ?
Hi easycure1974,
yes, it can do this and a lot more
pf said:
Hi easycure1974,
yes, it can do this and a lot more
Click to expand...
Click to collapse
I must be blind, I have owned this app since years but i have not found how to change the startmenu size - must look harder
Start sk-tools, then tune-up, then got through the tabs at the bottom to fonts or so (after colours, sorry, I have the german version and don't know the english names), there the 8. point is menu-bar-font-size (or so). Play here and you see the start-menu grow But remember, it needs a softreset to get the new settings!
pf said:
Start sk-tools, then tune-up, then got through the tabs at the bottom to fonts or so (after colours, sorry, I have the german version and don't know the english names), there the 8. point is menu-bar-font-size (or so). Play here and you see the start-menu grow But remember, it needs a softreset to get the new settings!
Click to expand...
Click to collapse
Found it but it does not change the size of the startmenu
What do you mean with the size of the start menu? If you make the font bigger, the start menu, using this font, gets bigger too. I have tried it and got a start menu up to nearly the width of the screen (much too big).
pf said:
What do you mean with the size of the start menu? If you make the font bigger, the start menu, using this font, gets bigger too. I have tried it and got a start menu up to nearly the width of the screen (much too big).
Click to expand...
Click to collapse
Strange, for me nothings happens with it - the menues in apps are bigger by ther other font setting but with that nothing happens

Way to alter menu sizes...?

Hi all,
I'm not sure what its called, but you know the context menus that come up basically whenever you hold your pointer over something for a while? It annoys me with the size they are in wm6.5. I love the speed of wm6.5 (tried both xplode's r7 (about to install 7.1...) and swampy's rls) but it really annoys me that they've made everything so big. Seems to take twice as long to do simple things now because now you have to scroll down menus to find what you're looking for. Is there anyway to bring this back to the good old "classic" sizes? I can't seem to find an option anywhere... and I realise loading a skinning app is just going to slow the OS down making the whole upgrade to 6.5 kinda pointless.
Also, does anyone know a way to speed up the actual time taken to register a tap and hold command? So that we don't have to spend as long to bring up the context menus?
Thanks in advance~
-kdp
that's a lot of questions. let me start with saying that i can not guarantee you, that the reg tweaks work. i found them for different devices and checked both my devices and didn't have the reg keys in there. so i don't knoiw if it helps you. Maybe, if i find out more, i'll post it later:
1. The size of the context and softkey menus:
a. the easiest way to influence the size and look of those menus would be, installing another theme. not just the color will change, but also the entire looks, so if you have a .tsk theme, copy it to the device and activate it, you will see it changed.
b. regitry tweak:
HKLM\System\GWE\Menu\Popfnt\
there should be two dword values that you can change to whatever you like.
ht=height is default set to 1000
wt=width is default set to 700
2. a skinning app is gonna slow down the os
- true, with wm6.5 there is really no need for anything else to make the graphics any nicer
3. tap and hold time:
HKCU\ControlPanel\Desktop\MenuShowDelay
right-click, select properties, and enter a value from zero to 999 milliseconds
if that value, does not exist, create it (string value)
if those values didn't work, you should try out advanced config, which can be downloaded here: http://www.pocketpc.ch/news/42529-freeware-advanced-config-3-0-a.html
there you have more than 200 tweaks for the os and don't need to search the registry for any values.
first off, a big thank you for the speediness of your reply.
i tried out the other tsk files i have... but unfortunately i don't have any older ones from wm5/6, only the newer 6.5 ones. they didn't seem to make much difference in size of anything... only the actual colour/font schemes. if you have any older tsk files that you wouldn't mind uploading, that'd be much appreciated as something to try.
the softkeys aren't so much an issue - i've got wisbar to disable them (yes yes, i know wisbar is a skinning app... but i prefer a nice cascading start menu to something i need to fumble through to find stuff any day) - its more the context menus that are annoying me.
the registry edit is interesting. changing the height and width actually also changes the zoom on the font size... i'm not sure how this is being calculated, but the font is clearly getting smaller the smaller you set the dimensions. it seems like its taking a predefined box with the text designed to take up a predefined percentage of it and then letting you put in the dimensions of the box... basically so that no matter what numbers you plug in, you'll always have the rather annoying amount of space being wasted between items in the context menus. though all that said and done, 750 for height and 350 for width are far more workable than the previous settings. more than legible too imo~
the tap and hold time tweak worked wonderfully
thanks again~
Tap and Hold time delay Setting
I found your post ref to Tap and Hold delays. I tried this Tap and Hold setting you said worked on your phone (see below) I tried it as shown below on a HTC wm 6.5 HTC pure(diamond2), and did not see a change, were you able to shorten the delay? Is that done with a String? or Dword?
3. tap and hold time:
HKCU\ControlPanel\Desktop\MenuShowDelay
right-click, select properties, and enter a value from zero to 999 milliseconds
if that value, does not exist, create it (string value).
I have spent hours searching the registry for a solution
it was a dword iirc... tbh, this hasn't been so much of an issue for me with the newer releases so i haven't bothered so much.
koi_desi_pagal said:
first off, a big thank you for the speediness of your reply.
i tried out the other tsk files i have... but unfortunately i don't have any older ones from wm5/6, only the newer 6.5 ones. they didn't seem to make much difference in size of anything... only the actual colour/font schemes. if you have any older tsk files that you wouldn't mind uploading, that'd be much appreciated as something to try.
the softkeys aren't so much an issue - i've got wisbar to disable them (yes yes, i know wisbar is a skinning app... but i prefer a nice cascading start menu to something i need to fumble through to find stuff any day) - its more the context menus that are annoying me.
the registry edit is interesting. changing the height and width actually also changes the zoom on the font size... i'm not sure how this is being calculated, but the font is clearly getting smaller the smaller you set the dimensions. it seems like its taking a predefined box with the text designed to take up a predefined percentage of it and then letting you put in the dimensions of the box... basically so that no matter what numbers you plug in, you'll always have the rather annoying amount of space being wasted between items in the context menus. though all that said and done, 750 for height and 350 for width are far more workable than the previous settings. more than legible too imo~
the tap and hold time tweak worked wonderfully
thanks again~
Click to expand...
Click to collapse
If you still need themes for wm6.1, try http://www.wm6themes.com/
I use one from that site on my BA, but since i don't have wm6.5 installed right now, i can't tell you whether it'll help in your situation or not.

Increasing text size?

Is there anyway of increasing the sms text size as it is being written? It's possible to increase the size of the conversation text above but what about the flashing cursor and the text being written...
laguna33p said:
Is there anyway of increasing the sms text size as it is being written? It's possible to increase the size of the conversation text above but what about the flashing cursor and the text being written...
Click to expand...
Click to collapse
Hi laguna33p,
The effect on font size change is only work on std SMS, there is no effect on font if u use SMS messaging.
you have to edit the mui file and it's a bit cumbersome process. I explained it somewhere on this forum, some search should reveal it
ozkaya said:
you have to edit the mui file and it's a bit cumbersome process. I explained it somewhere on this forum, some search should reveal it
Click to expand...
Click to collapse
Where have you explained it????? I cant seem to find it..
Infact even in traditional mode, the font size is too small...must be a reg hack somewhere to increase font size?

HTC Diamond2, WM6.5 Change Resolution

I have recently bought an HTC Diamond2 and upgraded its ROM to the official WM6.5, still using TouchFLO 3D. I have set the character size to the largest available size (through Settings), yet the character size in 'Contacts', SMS text and the digits when I dial a phone number is too small for my eyes.
Is there a Registry Tweak or Utility to further increase the character/font size?
I use a utility from here to zoom in/out text from SMS text, which is good but not adequate (NB that no sliding bars appear for the text to be read properly but...).
In addition, mine is bought from the Netherlands, yet I installed the official Greek WM6.5 ROM.
I tried RealVGA, but a single DPI is available (hence useless).
Thanks in advance for any information.
there is a magnifying program for the phone. Maybe this is something for you?
scorpower said:
there is a magnifying program for the phone. Maybe this is something for you?
Click to expand...
Click to collapse
i believe the real life application: "reading glasses" might also be appropriate here
jokes aside, magnification programs are easy to use. search for them in this forum. a few available i think.
I do own the real-life application "reading glasses"; the problem is that when I am about and the phone rings, it is not easy to take the 'application' out of my pocket and 'run' it.
I have also installed the Zoom In/Out application for SMS.
Nevertheless I am surprised there is no information on how to change the character DPI under WM6.5 or the screen resolution.
Thank you again for your answers
The fontsize from the SMS tab can be found in a _manila-File.
But i forgot in which file... You could ask a rom cook, who build in a biger SMS font.
I changed the font on Manila 2.1, but not on 2.5 with Mode9 editor.
greets, Inselstaat
pfoul said:
I do own the real-life application "reading glasses"; the problem is that when I am about and the phone rings, it is not easy to take the 'application' out of my pocket and 'run' it.
I have also installed the Zoom In/Out application for SMS.
Nevertheless I am surprised there is no information on how to change the character DPI under WM6.5 or the screen resolution.
Thank you again for your answers
Click to expand...
Click to collapse
Try this:
http://forum.xda-developers.com/showthread.php?t=551611
You can just use the slider to enlarge the text in SMS and emails.
As far as the system text.... maybe Advanced Config?
Thank you, but the proposed application does not run for some reason (I have install the latest mobile .net framework (version 3.7). Should I use 3.5 instead?
As for the last reply, I have set the character size to maximum from the Settings, but they are too small due to the small screen size compared to the resolution.
Judging from a LG GT500 I would say that a resolution of about 320x200 (or slightly higher) would be alright, but I know neither the Registry setting (if one is available) or a working application that can do the trick.
Thanks again for the replies though.
Try NET CF v3.5.

I wanna change font size in main lock screen.

I'm using wm 6.5(Miri Rom WM6.5 v6.0)
When my phone is locked, there is time and date lower side of screen.
And these are big font for me, so I want to change font size smaller.
What should I edit in registry? Help me plz~
waschaa said:
I'm using wm 6.5(Miri Rom WM6.5 v6.0)
When my phone is locked, there is time and date lower side of screen.
And these are big font for me, so I want to change font size smaller.
What should I edit in registry? Help me plz~
Click to expand...
Click to collapse
Copy "LS_LockScene_480x800.cpr" to your computer.
Open it with notepad (or similar).
Change the font size of the part you want to (e.g. "Date text")
Copy the file back to your phone (\Windows\Lockscreen)
Grtz,
Degake

Categories

Resources