Proximity Sensor Help - HD2 General

I'm having trouble with the proximity sensor on my HD2. It works if the phone is pressed up directly on my ear, but if I move it away just the slightest, the screen comes back. Is there somewhere I can access the proximity sensor settings, and give myself a bit more room? Like, say, anything inside an inch shuts off the screen?
ROM info is in the sig, and I'm using the HTC phone dialer, if that makes any difference.

http://forum.xda-developers.com/showthread.php?t=624206

Aw balls, I hate it when there's a thread for this, and my impatience with searching failed to find it.
Thanks!

Doesn't sound like that app does anything for the sensitivity, unless i missed it. it just makes the screen stay off after the sensor is activated.
However the point of the proximity sensor is to shut off the screen so your ear isn't pressing buttons. If you've got the phone far enough away from your ear to reactivate the screen, then there's no longer a need to turn off the screen to prevent ear dialing.
If you're worried about power savings, the screen should shutoff in a minute or so, depending on your screen timeout options

d0ug said:
Doesn't sound like that app does anything for the sensitivity, unless i missed it. it just makes the screen stay off after the sensor is activated.
However the point of the proximity sensor is to shut off the screen so your ear isn't pressing buttons. If you've got the phone far enough away from your ear to reactivate the screen, then there's no longer a need to turn off the screen to prevent ear dialing.
If you're worried about power savings, the screen should shutoff in a minute or so, depending on your screen timeout options
Click to expand...
Click to collapse
correct, I haven't found a way to change the sensitivity for it, just turn it on or off. I believe the way the sensor works like a motion sensor in a store, either you are there or not... Hardware driven on sensitivity, not software.

Nibbley15 said:
correct, I haven't found a way to change the sensitivity for it, just turn it on or off. I believe the way the sensor works like a motion sensor in a store, either you are there or not... Hardware driven on sensitivity, not software.
Click to expand...
Click to collapse
I actually posted about the sensor in another post. The sensor is just an IR LED and a photo diode. The photo diode looks for the reflected IR when the phone is near something like your ear.
The IR LED only turns on during a phone call. Try this get a digital camera with a live preview and aim it at the 2 dots where the proximity sensor is, you'll see the IR LED light up when you initiate a call
The same photo diode is used to alter the screen brightness depending on the ambient light that hits it

Related

Standby during phone call

Anyone know how to prevent auto-locking/standby when talking on the phone?
The screen turns off when I'm talking, which I assume is from the light sensor, which is fine, but when I take the handset away from my ear it remains dark or is on lock.
fflakes said:
Anyone know how to prevent auto-locking/standby when talking on the phone?
The screen turns off when I'm talking, which I assume is from the light sensor, which is fine, but when I take the handset away from my ear it remains dark or is on lock.
Click to expand...
Click to collapse
I have the same problem since it was new. Sent it back for repair, and told nothing was wrong with it.
I uninstalled all my apps, but no improvement. shaking and tapping the phone makes the screen flash back on for half a second, but not long enough to press hang up or any keyboard numbers for automated answering systems.
I rooted the phone to see if I could get more control, but haven't found an answer yet.
first, where are you having this problem?
WinMo/Android
and second, it's not the light sensor, it's the proximity sensor.

Opposite side of the LED flash

This might seem like a dumb question, and I just got my MTS 2 days ago, so I'm still learning about it, but at the top of the phone, where the LEDs are, what is the function of the opposite side of where you hear your calls? Is it there for looks or does it have LEDs in there also?
it is the proximity sensor... it is what "locks" the screen so you are not activating it with your cheek while on the phone... it also blacks out the screen when you are on the phone
I've always wondered what this was too... thanks for that information.
it also turns the button lights and keyboard lights on/off at certain light levels...that way when its bright it turns the lights off and when ur in the dark the lights come on...i love it!
-BMFC
RavenWulf said:
it is the proximity sensor... it is what "locks" the screen so you are not activating it with your cheek while on the phone... it also blacks out the screen when you are on the phone
Click to expand...
Click to collapse
that seems to be incorrect because i use the headset and if i lift the phone to a certain angle the phone screen turns off, but when i tilt it back down it turns on again. i will look into this more but from what i have seen it is just there to be a little more symmetrical(would you want a phone with asymmetrical looks to it)
tubaking182 said:
that seems to be incorrect because i use the headset and if i lift the phone to a certain angle the phone screen turns off, but when i tilt it back down it turns on again. i will look into this more but from what i have seen it is just there to be a little more symmetrical(would you want a phone with asymmetrical looks to it)
Click to expand...
Click to collapse
no hes right it IS a proximity sensor...go where theres some light and open the keyboard and see if the keylights are on...if so, try to make it brighter...(shine a flashlight at it or something) and the lights will go off...then put your finger over the sensor and the lights will come on...it works, try it...definitely not just for decoration...what you are experiencing is a perfectly normal effect of the proximity sensor doing what it does...no reason to look into it...
or download "Sensor List" from the market and look, it lists the prox. sensor and its data...put your finger over it and watch the output jump...
or run adb logcat and put your finger over it and itll come up with a entry about the light value changing...
-BMFC
tubaking182 said:
that seems to be incorrect because i use the headset and if i lift the phone to a certain angle the phone screen turns off, but when i tilt it back down it turns on again. i will look into this more but from what i have seen it is just there to be a little more symmetrical(would you want a phone with asymmetrical looks to it)
Click to expand...
Click to collapse
without the headset try calling your voice-mail in a lit room and hold the phone away from you and move it all around an at different angles, you will see it makes no changes but just by putting your thumb over that spot it kills the screen and as soon as you remove your thumb it comes back on... might want to actually do some reading or testing before saying someone is wrong. not only would a quick 5 second test show that it is the light/proximity sensor, or you could try a quick google search
You can also have the left light flash for missed messages.
i was doing some testing and i am retracting my statement, you were correct wulf and i am sorry that i doubted this.
hey it's kewl we all make mistakes

Screen not going off in a call!!!

Hy all
I have a strange problem with my X10! The will not go off in a call! (or at least most of the times it won't) The sensors should turn the screen off while the phone is to to my ear but most of the time it will not!
There is a hidden menu that have tests for almost every hardware component but the test for the proximity sensor only shows that the sensor is OFF and won't do the test!
Ideas?
The sensor is the little black circle (sort of) above and to the left of the "n"
e.g. Sony Ericsso'n'
Have you tried putting your finger over it during the test?
same problem here i tried the finger-trick doesnt work
I tried it and the test shows ON while my finger is there! So the sensor works properly but why the dialer is not using it to control the screen?
As stated before, if you cover the 'hole', the screen would not react to any of your finger touches. The screen would still be on but would turn off according to your settings (like 30 seconds or 1 minute or whichever). Try it. Call someone, cover the hole and try to hit 'end call' or slide up the keypad and then cover the hole and try to hit numbers.
The purpose of the proximity sensor is to turn the screen off in a call while the phone is to your ear! if i cover the sensor it must turn the screen off! but it doesn't! There is some kind of timeout set to this! The screen will turn off but after some time! this makes the proximity sensor almost useless!
No, it is to disable touchscreen buttons. It will turn off when time you've selected is over and turn on again and enable touch buttons when you take the phone out from your face.
Though i think you're right, it should turn the screen off to save battery, it is silly to have the screen on when you are using it.
Sent from my X10i using Tapatalk
Zenghelis said:
No, it is to disable touchscreen buttons. It will turn off when time you've selected is over and turn on again and enable touch buttons when you take the phone out from your face.
Though i think you're right, it should turn the screen off to save battery, it is silly to have the screen on when you are using it.
Sent from my X10i using Tapatalk
Click to expand...
Click to collapse
Quite right!
I guess the expectations are again set by Apple's standards. Their proximity sensor functions as one would expect.
However the sensor on the X10 does what it was designed to do, and that's to deactivate the touchpad whilst the device is held up to your ear.
The screen timeout is a different setting all together (unfortunately).
Baggyb said:
Quite right!
I guess the expectations are again set by Apple's standards. Their proximity sensor functions as one would expect.
However the sensor on the X10 does what it was designed to do, and that's to deactivate the touchpad whilst the device is held up to your ear.
The screen timeout is a different setting all together (unfortunately).
Click to expand...
Click to collapse
Not the expectation set by Apple. It's expectation for any right minded individual.
SE software is just well known as one of the worst top players in the industry.
FFS, they spent all the time on DRM, lock the phone, developing battery hungry useless software on 1.6 rather than push out 2.1 asap, that tells you something.
superprelude said:
Not the expectation set by Apple. It's expectation for any right minded individual.
SE software is just well known as one of the worst top players in the industry.
FFS, they spent all the time on DRM, lock the phone, developing battery hungry useless software on 1.6 rather than push out 2.1 asap, that tells you something.
Click to expand...
Click to collapse
Why not go through the Manual once before abusing Company left - right.....
Let me copy and paste it for you guys........
Sensors
Your phone has two built-in sensors – a light sensor and a proximity sensor. The light sensor is used for automatic LCD backlight control. The proximity sensor turns the touch screen off when your face touches the screen. This prevents you from unintentionally activating phone functions when you are engaged in a call.
TechGuru_x10 said:
Why not go through the Manual once before abusing Company left - right.....
Let me copy and paste it for you guys........
Sensors
Your phone has two built-in sensors – a light sensor and a proximity sensor. The light sensor is used for automatic LCD backlight control. The proximity sensor turns the touch screen off when your face touches the screen. This prevents you from unintentionally activating phone functions when you are engaged in a call.
Click to expand...
Click to collapse
Yes and this is plain stupid use of the sensor! Take the HD2 for instance! Its proximity sensor turns the screen off the second you take the phone to your ear! This is done with every HTC device having the sensor! It is just misused on the X10! I hope that somebody here would correct this with a little program some day!
OrionBG said:
Yes and this is plain stupid use of the sensor! Take the HD2 for instance! Its proximity sensor turns the screen off the second you take the phone to your ear! This is done with every HTC device having the sensor! It is just misused on the X10! I hope that somebody here would correct this with a little program some day!
Click to expand...
Click to collapse
This is the main problem with us ,,, we start to compare and complain rather than think why did SE will give two sensors instead of one.
Answer is not known to me but this much I know they know better than us.
If you think you know better, be my guest and throw some knowledge here. I am new to Android but not to SE.
So im new to the forums, but I was having a problem with the proximity sensor...
As stated in a lot of threads, the proximity sensor does work and will "lock" the screen so that once your face is near the screen it will not allow any clicking of the buttons.
Also the screen is supposed to turn off about 15sec into the call. Mine turned off, but then all of a sudden turned on again...this would happen repeatedly.
I found out the solution...it seems advance task killer was not allowing the screen to turn off.
I had auto kill enabled and set it to when the phone was locked to kill apps.
I turned off auto kill, and everything seems to be working fine with the screen and proximity sensor now..
hope this helps anyone having this issue!
thx, same problem here !!
so its pretty clear none of us know the answer to this, but yet we're still bashing each other. LOL! ppl let's get constructive, we dont have the answers so lets accept the fact and seek help some where else.
o2 Germany told me, that Sony Ericsson will bring us an update within the next 4 weeks to all devices.
It will be an update with alot of bug fixes (e.g. proximity sensor ) and speed improvements.
So, be cool. Sony Ericsson is working on that and with Eclair in autumn, our battery will perform very well.

Blackout screen during phone calls

what feature is this? when i put the phone near my face the screen goes blank and when i move it away from my face the menu lights up, pretty cool. anyone know how it works?
Not sure of the technical aspects, but I've heard it has a sensor - much like a car has headlight sensor. When it gets dark, the headlights go on, when it's daylight, headlights shut off. Phone is the opposite, dark to your face - light off, pulled away from face, lights up. I agree, cool feature - helps to conserve battery a little bit too.
It's a proximity sensor. The screen turns off so that it doesn't accidently register the screen touching your face as a touch input (aka your face touches the 'end call' button while in the middle of talking).
Lol all phones have done this using a proximity sensor for about 4 years now;-). It's nice though! Otherwise your cheek would press all kinds of buttons during a phone call, likely the end button as one of them.
These have been around for about six years now on mobiles.
Yes, this is nothing new on phones. If you're interested, look very closely at the phone's front, to the left of the speaker as you look at it. Opposite side of the camera lens. You may have to tilt it a bit, and bright light will help. You'll see two very small transluscent spots. One is the light sensor, the other is the proximity sensor.

[Q] Defy+ proximity sensor issue

My defy+ proximity sensor is not working.
As soon as I make a call, the phone screen goes black. The call goes thru fine, but the screen goes black.
No, I don''t have my finger or face near the proximity sensor.
No mods on the phone OS.
I did some debugging-
Cleaned the back of the phone by blowing air.
Tried the screw loosening like in the youtube video
Changed brightness settings from auto to manual.
Changed display turn off from 1min to never.
Finally, I downloded a sensor app and checked for change in the value of the proximity sensor when put by finger in the sensor area. The value was stuck at 3%, no matter what I did.
I was playing around and when I pressed the speaker area near the proximity sensor, the sensor value jumped to 100%
So I think the glass is blocking the sensor (or acting as a reflector).
Just to make sure the glass was the issue, I made a call by keeping the speaker area pressed. It worked as expected - no screen blanking after call. It does go black if I put my finger in the proximity sensor area.
I have no idea how to fix it.The screen & sensor need to be pressed closer.
Only thing I have tried is tighten the screws in the back. But no use.
Any help?
Since you don't have mods, it's probably broken, go to customer care.
Or you can maybe try factory reset
Do you have a screen protector?
Out yes remove it.
If not your sensor is broken.
Sent from my MB526 using XDA Premium 4 mobile app

Categories

Resources