Database Users

MMS Settings on O2?

Hi everyone, I am a newbie here. I am using a T-mobile MDA compact (unlocked) on O2 network. I found the settings for GPRS in the forum, and it works fine. But am still looking for the settings for MMS. Could anyone please kindly tell me, I will be most appreciated.
By the way, anyone has any idea how O2 charges for GPRS web browsing. I am on O2 anytime 200 monthly contract.
Many THX!!

Dude you should at least post your location if you are asking about help with prices. O2 and T-mobile is in many countries...

Hi lee
if you r in UK then check the following post
http://forum.xda-developers.com/viewtopic.php?t=13861&highlight=
regards
GUGI

Yeah I am in the UK. Thx for your reply, gugi_sat, but is that for O2 Pay&Go. I am using O2 Pay Monthly, I have tried MMS settings as below but still not working. Anyone using UK O2 pay monthly got any clue? Many Thx!!!~
How do I manually check/setup the GPRS WAP settings?
Start > Settings > Connections > Connections >
Under My Work Network tap Manage Existing Connections
Tap Edit
The Select a Modem drop-down box should be set to Cellular Line (GPRS)
Tap Next
Access Point Name: wap.o2.co.uk (for Prepay enter payandgo.o2.co.uk)
Tap Next
Username2wap (for Prepay enter payandgo)
Password: password
Domain: leave blank
Tap Advanced
On the TCP/IP tab, only Use Server-assigned IP Address should be selected
Tap the Servers tab
Only Use Server-assigned Address should be selected
Tap OK
Tap Finish
Tap Proxy Settings
Tap Advanced
In the WAP field enter 193.113.200.195
In the field to the right of this enter 9201
Tap OK and exit
How do I manually check/setup the MMS settings?
Start > Messaging > Tools > MMS Settings
Connect Via: My Work Network (this links to the GPRS WAP settings)
Tick Retrieve Messages Immediately
Tick OK to download when roaming
Tick Save sent messages
Attempes before give up: 3
Photo Resolution: Original
Tap the Servers tab
Tap O2UK
Server Name: O2UK
Gateway: 193.113.200.195
Port Number: 9201
Server Address: http://mmsc.mms.o2.co.uk:8002
Sending Size Limitations: 100K
Tap OK twice to exit

MMS on Windows Mobile 5 - getting there but not there yet

My experiences with MMS on my PDA2K (Blue Angel) upgraded to Windows Mobile 5 on O2 UK PAYG:-
Pixer4MMS - a very stable MMS client. Pictures load easily without the application hanging like EZWap does (see below). I can send an MMS but I can't seem to be able to receive MMS's.
EZWap2.5 for Pocket PC Phone Edition - can WAP browse OK. WAP browsing is very fast - a lot faster than browsing WAP sites on Pocket Internet Explorer. But some problems with the MMS function. When loading a picture, the application always hangs and I have to do a soft reset to bring the Pocket PC back to life. I can send a MMS OK but again, I can't receive an MMS.
Arcsoft MMS Composer - I understand from posts on these forums that it doesn't work on Windows Mobile 5.
My device information:-
ROM version 5.03.02 WWE
ROM date 03/02/05
radio version 1.06.00
Protocol version 1337.38
ExtROM version (blank)
My quest to get a working MMS client goes on..........
Peter, UK

An update
The reason I'm not receiving MMS messages is because they end up in my O2 media messaging inbox.
I have successfully sent MMS's from both Pixer and EZwap. Usually the next day, I get a SMS pointing me towards my O2 Active Media Message inbox and lo and behold, there they are.
I can't for the life of me work out why they are not appearing on my phone.
I contacted O2 and they gave me all the settings for the Exec which runs WM 5.0 and I can see that I'm using all the right settings for O2 on Pay as you Go.
If anyone is interested, here are the settings that O2 sent me:-
How do I manually check/setup the GPRS Web settings?
Start > Settings > Connections > Connections >
Under My ISP tap Manage Existing Connections and then Tap Edit
(if this isn't present then tap 'Add a new modem connection')
The Select a Modem drop-down box should be set to Cellular Line (GPRS, 3G)
Tap Next
Access Point Name: mobile.o2.co.uk
Tap Next
Username2web
Password: password
Domain: leave blank
Tap Advanced
On the TCP/IP tab, only Use Server-assigned IP Address should be selected
Tap the Servers tab
Use Specific Server Addresses should be selected
DNS: 193.113.200.200
Alt DNS: 193.113.200.201
Tap OK
Tap Finish
How do I manually check/setup the GPRS WAP settings?
Start > Settings > Connections > Connections >
Under My Work Network tap Manage Existing Connections and then Tap Edit
(if this isn't present then tap 'Add a new modem connection')
The Select a Modem drop-down box should be set to Cellular Line (GPRS, 3G)
Tap Next
Access Point Name: wap.o2.co.uk (for Prepay enter payandgo.o2.co.uk)
Tap Next
Username2wap (for Prepay enter payandgo)
Password: password
Domain: leave blank
Tap Advanced
On the TCP/IP tab, only Use Server-assigned IP Address should be selected
Tap the Servers tab
Only Use Server-assigned Address should be selected
Tap OK
Tap Finish
Tap Proxy Settings
Tap Advanced
Tap the WAP field
In the Server filed enter 193.113.200.195
In the Port field enter 9201
Tap OK 4 times and exit
How do I manually check/setup the MMS settings?
Start > Messaging > Menu > MMS Configuration
In the Preferences tab tick Retrieve Messages Immediately
Tick Download on home network only
Tick Save sent messages
Tap the Servers tab
Tap O2UK
Server Name: O2UK
Gateway: 193.113.200.195
Port Number: 9201
Server Address: http://mmsc.mms.o2.co.uk:8002
Set the 'Connect Via' drop down box to My Work Network
Sending Size Limitations: 100K
WAP Version: 1.2
Tap OK twice to exit
How do I manually setup the POP3 settings?
Start > Messaging > Menu > Tools > New Account
Email address: enter your full email address
Tap Next
Your Name: your full name (or can be anything)
User Name: your email account username (the format will differ across ISP's)
Password: your email account password
Tick Save Password
Tap Next
In the Name field you can enter a name for the account (only possbile if setting up new acccount)
Tap Next
Incoming Mail: your ISP incoming mail server
Outgoing Mail: smtp.o2.co.uk
Leave the Domain field blank
Tap Finish
How do I manually check/setup the GSM web settings?
Start > Settings > Connections > Connections >
Under My ISP tap Manage Existing Connections and then Tap Edit
(if this isn't present then tap 'Add a new modem connection')
The Select a Modem drop-down box should be set to Cellular Line
Tap Next
Dial up Number: +447712932932
Tap Next
Username2web
Password: password
Domain: leave blank
Tap Advanced
On the TCP/IP tab, only Use Server-assigned IP Address should be selected
Tap the Servers tab
Use Specific Server Addresses should be selected
DNS: 193.113.200.200
Alt DNS: 193.113.200.201
Tap OK
Tap Finish
How do I manually check/setup the GSM WAP settings?
Start > Settings > Connections > Connections >
Under My Work Network tap Manage Existing Connections and then Tap Edit
(if this isn't present then tap 'Add a new modem connection')
The Select a Modem drop-down box should be set to Cellular Line
Tap Next
Dail up Number: +447712927927
Tap Next
Username2wap (for Prepay enter payandgo)
Password: password
Domain: leave blank
Tap Advanced
On the TCP/IP tab, only Use Server-assigned IP Address should be selected
Tap the Servers tab
Only Use Server-assigned Address should be selected
Tap OK
Tap Finish
Tap Proxy Settings
Tap Advanced
Tap the WAP field
In the Server filed enter 193.113.200.195
In the Port field enter 9201
Tap OK 4 times and exit
Peter, UK

MMS on Windows Mobile 5 - got there!
I'm happy!!
A few days after sending my original posting, I am now pleased that I can now RECEIVE as well as send MMS's with EZWap 2.5 on my PDA2K Blue Angel upgraded to WM5.
The reason I couldn't receive is now clear to me I think. In the EZwap user guide pdf, it clearly states that "Enable Push" in the "Push" tab of the programme must be ticked in order to receive MMS's. I had ticked it but was using port 9201 whereas I needed to enter port 2901. I found this port number from the excellent instructions in this thread:-
http://forum.xda-developers.com/viewtopic.php?t=5363&highlight=2901+port+o2
The relevant part from the above post that I followed and which made receiving MMS's suddenly work for me is:-
Push
- Enable Push: Ticked
- Address: Leave empty*
- Port: 2901
- Connectionless push gateway: Ticked
- WTLS secured connection: Unticked
* actually, I entered 193.113.200.195 in the address field and it works.
I'm happy!!

How mMode (AT&T Wireless SIM Card) Works on Unlocked Cingular 8525 / HTC Hermes

My IPS Settings:
Start > Settings > Connections (Tab) > Connections > Advanced (Tab) > Select Networks
Under where it says “Programs that automatically connects to the Internet should connect using:”, select “New”.
General Tab:
Enter a name for these settings: mMode
Modem Tab:
Add “New”.
Enter a name for the connection: mMode
Select a modem: Cellular Line (GPRS, 3G)
Access point name: proxy
User name: <blank>
Password: <blank>
Domain:* <blank>
Click on “Advanced”.
TCP/IP Tab:
Use server-assigned IP address: Option selected
Use software compression Unchecked
Use IP header compression Unchecked
Servers Tab:
Use server-assigned address: Option selected
Click “OK” and then click “Finish”.
Proxy Settings Tab:
Check “This network connects to the Internet”.
Check “This network uses a proxy server to connect to the Internet”.
Proxy server: 010.250.250.054
Click on “Advanced”.
HTTP: 010.250.250.054 Port: 8080
WAP: 010.250.250.054 Port: 8080
Secure WAP Proxy: <blank> Port: 9203
Socks Proxy: 127.0.0.1 Port: 1080T Type: Socks 4
Click “OK” to finish.
Click “OK” to save and exit.
MMS Settings:
Messages > Menu > Tools > Options > Accounts (Tab) > MMS > Servers (Tab)
Add “New”
Server name: mMode MMS
Gateway: 010.250.250.100
Port number: 9201
Server address: http://mmsc.mymmode.com
Connect via: The Internet
Sending size limitation: 300K (if available for selection)
Click “OK”.
Highlight the “mMode MMS” you just created and click “Set As Default”. Then click “OK” to finish.
APN Setting: (Optional and available only on the Cingular 8525 before the New AT&T 8525 ROM update version 2.15.502.3)
Start > Programs > Wireless Modem > Menu > APN Setting
Preset GPRS connections: Checked
Access Point Name (APN): proxy
Click “OK” and make sure the “Connection Type = USB”, then click “Done” to finish.

Thanks
Thank you so much for taking the time to do this. I've been looking for this for a while.

Thank you so much!

My blue sim didn't need any settings.
I can't figure it out. All I did was create a modem connection for GPRS 3G without a proxy, user name, password etc. Set the perferred networks and to 'auto' for the connection band type in the phone app.
Had no problems with UTMP HSPDA connections here in Chicago and I get sms to my number and to my @mmode.com address no problem. I don't to MMS. PIE works fine and I get U/H speeds 800+ enough to support 128kbit streams from radioio and VPN terminal sessions to 2k3 server.

I agree with teambnet ... I had intially put in all the setting shown above, but I was not able to connect (the error message was that there was no response or something to that effect)
Finally, after reading teambnet's post, I simply unchecked the user a proxy and removed the different entries for the ip addresses for the http, https, ssl, etc.
So basically, I just entered proxy and left the other fields blank, and I'm up and running getting 3G speeds. Thanks for your help everyone.
Cingular 8525
Windows Mobile 6
LVSW's ROM recooked by vp3G
HardSPL Version 7 (2.10.olipro)
Radio 1.40

Thanks a lot. I've been using this as reference from the date you originally posted it. Can anyone out there make a cab file with this?
Edit: What happened here? It's a good thing I printed this a long time ago because the OP edited the above info and now everything is incorrect.

Start > Settings > Connections (Tab) > Connections > Advanced (Tab) > Select Networks
Under where it says “Programs that automatically connects to the Internet should connect using:”, select “New”.
General Tab:
Enter a name for these settings: mMode
Modem Tab:
Add “New”.
Enter a name for the connection: mMode
Select a modem: Cellular Line (GPRS, 3G)
Access point name: proxy
User name: <blank>
Password: <blank>
Domain:* <blank>
Click on “Advanced”.
TCP/IP Tab:
Use server-assigned IP address: Option selected
Use software compression Unchecked
Use IP header compression Unchecked <----This should be checked.
Servers Tab:
Use server-assigned address: Option selected
Click “OK” and then click “Finish”.
Proxy Settings Tab:
Check “This network connects to the Internet”.
Check “This network uses a proxy server to connect to the Internet”.
Proxy server: 010.250.250.054
Click on “Advanced”.
HTTP: 010.250.250.054 Port: 8080
WAP: 010.250.250.054 Port: 8080
Secure WAP Proxy: <blank> Port: 9203
Socks Proxy: 127.0.0.1 Port: 1080T Type: Socks 4 <----It's port 1080
Click “OK” to finish.
Click “OK” to save and exit.
MMS Settings:
Messages > Menu > Tools > Options > Accounts (Tab) > MMS > Servers (Tab)
Add “New”
Server name: mMode MMS
Gateway: 010.250.250.100
Port number: 9201
Server address: http://mmsc.mymmode.com
Connect via: The Internet
Sending size limitation: 300K (if available for selection)
Click “OK”.
Highlight the “mMode MMS” you just created and click “Set As Default”. Then click “OK” to finish.
APN Setting: (Optional and available only on the Cingular 8525 before the New AT&T 8525 ROM update version 2.15.502.3)
Start > Programs > Wireless Modem > Menu > APN Setting
Preset GPRS connections: Checked
Access Point Name (APN): proxy
Click “OK” and make sure the “Connection Type = USB”, then click “Done” to finish.

messaging works but no IE
I just updated my 8525 to wm6 via the posted rom on the ATT site. Before updating the only entry I had in connections to make it work was 'proxy'. Both email and iE worked perfectly at GPRS or 3G speeds.
I tried the settings that are posted on this thread and I get a nasty message when trying to connect.
I removed the proxy server info and went back to the APN entry of 'proxy' and I am able to send and recive emails. When I go to IE and try to find a page, it says 'locating' the graphic spins on the right hand side of the screen, but I get the 'page cannot be found error'. I guess I am not connecting properly to the DNS server?
Anyone have some suggestions?

Resolved the IE issue
I went to programs PROXY manager - and selected diable PROXY... Now IE works and messaging work... Only item needed in the configuration was 'proxy'

Cingular 8525 (windows mobile 6)with old at&t and mMode
Hello,
I just upgraded to wm6 and am using the old at&t sim.
Please could some one point to the setting I need to enter to use mMode on my cingular 8525.
help will be much appreciated.
Thank you very much
HTC fan

Issue with GPRS on O2 (UK) with WM6

Hi all,
Fairly new to all this but I successfully managed to upgrade to WM6 but can't get GPRS working after the upgrade. I've tried various versions of the Radio but nothing seems to work.
I've tried searching O2 on these forums but can find nothing.
Anyone got any ideas?
Regards
Hades

Still no-one with an idea?
Anyone know if I can extract the radio files from WM5 and input them into WM6? If so how would I go about this?
Hope someone can help me.
Regards
Hades

I am running WM6 and GPRS works fine with O2 UK. Have you checked all the settings?
Do a search and you should find a cab file floating around with the o2 settings.

Yeah I've hunted high and low in these forums and found a few places ppl are asking the same question but no real answer.
Any idea what radio version your using?
If so where can I get the cab?
Thx
Jim

Cant remember where on the forum I found this but these ae the settings I always use for O2 UK, always works.
How do I manually check/setup the GPRS Web settings?
Start > Settings > Connections > Connections >
Under My ISP tap Manage Existing Connections and then Tap Edit
(if this isn't present then tap 'Add a new modem connection')
The Select a Modem drop-down box should be set to Cellular Line (GPRS, 3G)
Tap Next
Access Point Name: mobile.o2.co.uk
Tap Next
Username: o2web
Password: password
Domain: leave blank
Tap Advanced
On the TCP/IP tab, only Use Server-assigned IP Address should be selected
Tap the Servers tab
Use Specific Server Addresses should be selected
DNS: 193.113.200.200
Alt DNS: 193.113.200.201
Tap Ok
Tap Finish
How do I manually check/setup the GPRS WAP settings?
Start > Settings > Connections > Connections >
Under My Work Network tap Manage Existing Connections and then Tap Edit
(if this isn't present then tap 'Add a new modem connection')
The Select a Modem drop-down box should be set to Cellular Line (GPRS, 3G)
Tap Next
Access Point Name: wap.o2.co.uk (for Prepay enter payandgo.o2.co.uk)
Tap Next
Username: o2wap (for Prepay enter payandgo)
Password: password
Domain: leave blank
Tap Advanced
On the TCP/IP tab, only Use Server-assigned IP Address should be selected
Tap the Servers tab
Only Use Server-assigned Address should be selected
Tap Ok
Tap Finish
Tap Proxy Settings
Tap Advanced
Tap the WAP field
In the Server filed enter 193.113.200.195
In the Port field enter 9201
Tap Ok 4 times and exit
How do I manually check/setup the MMS settings?
Start > Messaging > Menu > MMS Configuration
In the Preferences tab tick Retrieve Messages Immediately
Tick Download on home network only
Tick Save sent messages
Tap the Servers tab
Tap O2UK
Server Name: O2UK
Gateway: 193.113.200.195
Port Number: 9201
Server Address: http://mmsc.mms.o2.co.uk:8002
Set the 'Connect Via' drop down box to My Work Network
Sending Size Limitations: 100K
WAP Version: 1.2
Tap Ok twice to exit

Need MMS Settings (o2 Pay As You Go)

So i have My Lovely Touch HD - which i love by the way
but i cant send any MMS messages, im on o2 Pay As You Go
is it possible for me to get the settings so that i can send MMS?

I found lots of different settings dont work
But these have always worked for me, give it a go:
GPRS Web and WAP settings
Start > Settings > Connections > Connections > Under My Work Network tap Manage Existing Connections and then Tap Edit (if this isn't present then tap 'Add a new modem connection')
Cellular Line (GPRS)
Access Point Name: payandgo.o2.co.uk
Username: payandgo
Password: password
Domain: leave blank
Tap Advanced
On the TCP/IP tab, "Use server-assigned IP address" should be selected
Tap the Servers tab "Use specific server address" should be selected with
DNS: 193.113.200.200 Alt DNS: 193.113.200.201
Tap OK Tap Finish
Tap Proxy Settings -> Tap Advanced
HTTP field enter: 193.113.200.195 port: 8080
WAP field enter 193.113.200.195 port: 9201
Tap OK and exit
Start > Settings > Connections > Advanced > Select Networks Use My Work Network for both options

Has anyone tried this?
I haveand with no success;(

I have been setting up O2 phones for some time using the settings and procedures from the following 2 posts and it's perfect
http://forum.xda-developers.com/showthread.php?t=390017
http://forum.xda-developers.com/showthread.php?t=309108

For dutch people
http://www.belcompany.nl/NL/Alle_Vrijheid/ringtones_en_wallpapers/instellingen_voor_je_mobiel.htm

use the attached, covers all uk operators,
on computer:
unzip
run the .exe
select network
on device:
install to device not storage card
will install all gprs/3G/hsdpa/sms/voicemail/mms settings - file source htc
sti555

sti555 said:
use the attached, covers all uk operators,
on computer:
unzip
run the .exe
select network
on device:
install to device not storage card
will install all gprs/3G/hsdpa/sms/voicemail/mms settings - file source htc
sti555
Click to expand...
Click to collapse
tried this but every time phone states "Installation of Customization O2UK.CAB was unsuccessful"
any advice?
running htc tytn ii with kaiser_wwe_shifu_v4.0 rom if it helps any?