Hi all,
i'm pretty much new to this community but i been following it for a while, cause i wanted to know as much as i could before buying a HD2.
so now i bought two HD2 in HongKong, since i am from austria i flashed both to ger roms.
i just used one to figuera all functions out n give it then to my wife. No i got my hands more on the second one, since i gave the first away, and there a some diffrences.
After a while searching in the forum there is a Rev. A and B. well the first is B the sec is A.
the first is: HT04J (as far as i got it right from the forum it means. 2010.04.11 rev. B)
second : HT9CP(2009.12.15)Rev. A
the only diffrence i noticed first is the battery, it just got a diffrent case. the keys are on both lil slapy, especially the volume ones.
the biggest diffrence is the vibration motor. on the Rev. B is it while typing realy smooth n nice.
on the Rev. B model it got a..i dunno kliring sound. well it just dosn't soudn right.
my questions now are, can i send the rev. a model for repair in n hope i got a rev. b back and if thats the case, then i guess i need to restore an original rom, radio, sspl?
could somebody help me there, what are the steps to doing it, if possible?
the model is a t8585 (CHT) what will happen if i send it in with the cooked rom?
best regards!
i recently sent mine in with a cooked rom and they never said anythin but they do re install oe's latest rom to rectify any software issues. however if you broke your charging port like me they wont do anything but
ALWAYS restore stock ROM before sending the phone for repair. If they find HSPL, in most cases they will charge you for repair for using "illegal software".
thats my problem, what are the steps to doing it?
or better, "what" rom is the stock rom for my phone, i found the WWE roms but none for CHT.
and then how i do it? will it be like
1st flash stocking rom ( if there is any for my phone)
2nd restore original radio
at last remove hspl?
btw, how do i remove hspl? just with the same software i did hspl? just install for example i had 1.44 on n now 1.66 hspl. and now i check 1.44 spl ?
thx so far
1st and only step is to READ THE FLASHING GUIDE, under the "To Remove HardSPL from your Device or Flash back a Stock Rom and Stock SPL for Warranty Purposes"...
SFR (French service provider) never complained when I accidentally sent mine back with HSPL still installed and from what I've read, they never do, so it probably depends on who you have to send it back to but considering the small amount of time and effort required you'd probably better go back to your stock ROM and SPL just to be on the safe side.
thx
i read that thread but never saw the flash back lines so thx
but how do i know what leo version i got?
Related
hi i was trying to flash my friends htc 8125 with the tutorial on this web and now i just have 3 color display or boot mode i think. im new this was my first time i flashet first with buton ... flash but not work error 302 but after i flash with alternative flash was in the tutorial and i get an error to so i dont know what to do how to repair
HTC CINGULAR 8125
IPL 1.05
SPL 1.05
I'm kinda of new too, but I believe you just have to pick the rom u want to flash up to. U r at the ideal ipl & spl. I just did that to mine about a week ago and then flashed it EXACTLY like forum said and then just update to 3.XXIPL & 3.XXSPl. After which I picked 1 of the TNT rOMs and wella! try to flash it up now
i dont know wheres to find the roms do you have a link or something
Have you CID unlocked yet?
Obviously not unlocked yet!
Cause he stucks on step 1 !
hahahaha upgrade an original rom... try the 2.26 tmobile not 3.08 please...
Hey Que
I will be getting T-Mobile any hour today...
I will be following all the instructions and try to use a Cingular card on it.
I'm trying to decide what to use for updating the rom on this 8125 the ipl reads 2.25 the spl reads 2.25. in the tutorial there isnt any mention of these that I can ascertain. the other numbers are os 2.25.11.1 gsm 02.25.11
Is this even a necessity. The unit shuts down and is very difficult to get restarted, seems to be a good unit, just looking to make it more reliable. Thanks in advance for the help.
hydafl said:
I'm trying to decide what to use for updating the rom on this 8125 the ipl reads 2.25 the spl reads 2.25. in the tutorial there isnt any mention of these that I can ascertain. the other numbers are os 2.25.11.1 gsm 02.25.11
Is this even a necessity. The unit shuts down and is very difficult to get restarted, seems to be a good unit, just looking to make it more reliable. Thanks in advance for the help.
Click to expand...
Click to collapse
Your phone is running the official cingular stock rom and has official IPL/SPL 2.25 (Bootloaders),its nothing to be worried about,now it depends if you prefer to reflash the official wm5 rom or wud like to upgrade to latest wm6.1 custom build roms.
If you want to keep official then download the official wm5 stock rom and simply flash it,but if you desire to upgrade to latest wm6.1 rom,as no official wm6 roms are provided,therefore,you'll have to flash a custom build wm6.1 rom,and for that you'll have to get your phone CID unlocked.
my phone is in boot mode i dont have the roms im new wheres can i find the rom that you say the tmobile my phone was with the original cingular rom or where can i find the original one
mmmmm ok!
I dont have the link but you an enter in wiki section for wizard... is a thread that said wizard goes wiki click there and then it tooks you to the wiki pages! there... you can found a link that takes you to the original roms... choose the one you see for cingular..... some links are broken so dont desperate maybe we can found other one... if you dont get it there you can choose the search tool just follow my steps on my signature says The XDA search culture...
Dont be afraid men you only need to use some more things to start unbricking your phone... (I hope so) many things tooks time cause we dont read enough now lets work men!!!
Well avoiding duplicatted posts this is gonna change many times
Here is my RUU without ID http://forum.xda-developers.com/showthread.php?t=429327&page=9
I didnt found the cingular but try to unzip the exe file with winrar... the nk.nbf can be cutted and pasted in the RUU folder to upgrade it without ID vendor permissions... we will on touch men!
Xplain more
Xplain more of your problem remember that unlock upgrade flashing dids most be done on XP and without SIM and MiniSD pluged... be sure your batt is full charged and your USB cable dont have troubles.
Can you privide more info abour exactly what you have done... please men we need all you got
OH remember not to use so much your phone on Bootloader screen cause we need the batt almost 70% to downgrade unlock and upgrade again it dont charge in RGB screen.
About getting official Wizard Cingular ROMs.
I called HTC and Cingular they say that HTC is not licensing the Wizard WM6 from Microsoft anymore, so they are not supplying the ROMs for the public.
No official support from Cingular/HTC on Wizard for WM6 or 5 for that matter.
I'm new to pdas I've only ever had cell phones so with that in mind its confusing as to where to start. I'm electronic savvy when it comes to car repair, however some of this is daunting at best. I'd like to take this semi-bricked wizard to the next level.
Everytime I find what I'm looking for the webpage is obsolete, what to do?
hydafl said:
I'm new to pdas I've only ever had cell phones so with that in mind its confusing as to where to start. I'm electronic savvy when it comes to car repair, however some of this is daunting at best. I'd like to take this semi-bricked wizard to the next level.
Everytime I find what I'm looking for the webpage is obsolete, what to do?
Click to expand...
Click to collapse
First,always post the DOC Chip version of the phone,what is the IPL/SPL of the phone.
Secondly,what exactly is the problem and what you want to do ?
the ipl/spl are at 2.25 and the specific problem is that wen in hibernate mode the only way to work with it is to remove the battery to restore functionality, then that resets the factory settings of time and date and also drops calls etc.
hydafl said:
the ipl/spl are at 2.25 and the specific problem is that wen in hibernate mode the only way to work with it is to remove the battery to restore functionality, then that resets the factory settings of time and date and also drops calls etc.
Click to expand...
Click to collapse
Its a G3 version,download the official stock wm5 rom from here and flash it:-
http://download.america.htc.com/RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1.exe
But,if you want to upgrade to latest wm6 then follow this link and do it correctly as the guide reads :-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Good luck
Well I think its bricked no screen and no charge light, should I buy a new battery or just sell it for parts? I really tried to find the correct place to update and I goofed what can I say its my responsibility, is thereanymore I can do from this point?
hydafl said:
Well I think its bricked no screen and no charge light, should I buy a new battery or just sell it for parts? I really tried to find the correct place to update and I goofed what can I say its my responsibility, is thereanymore I can do from this point?
Click to expand...
Click to collapse
G3 devices don't get Bricked like this,by just flashing a rom,untill and unless you have flashed any G4 IPL/SPL on it,otherwise,G3 phones never get Bricked.So most probably its the battery,try to get the battery charged or get another battery from a friend and confirm it.
As an update and thank you very much. I purchased a new battery and the the store was good enough to pre charge it. We installed the above official wm5 file and its currently going throuh re updating itself. I did happen to notice that it now has an AKU2 file. Is this an update over and above what I had originally?
Once again thanks....
Are there any problems with 3G sim cards because when I installed the card the phone reacts as if there is no battery. No charge indicator or any activity.
Problem solved, it helps to have the sim card properly seated.......
Thanz!
You are most welcome,glade its working.
Yes,the above rom is AKU 2,its an upgrade to your previous official Rom,always try to keep the battery fully charged,as it creates many problems if it gets below the required retention charge of 30%.
Try out the Guide I posted above and see if you can get it CID unlocked and upgraded to latest wm6.1 rom,thats where the fun begins....!
Hello
I noticed a very annoying bug at my phone: sometimes when I end a call the phone function stalls (the icon on the upper bar shows conversation in progress)
The only way to use the phone function again is to soft reset it. Lately I get the same problem but without the icon that shows conversation in progress. During this time all the incoming calls are not prompted. Basically on the caller side my phone "rings" but my phone doesn't even notice the incoming call. This prevents me from receiving very important calls that affect my business.
I cannot upgrade my ROM (1.14.479.3 ) since there is no official version for my region.
Any of you have this problem ? Shall I bring it to service ?
Please tell me your thoughts
SR
seems like a software issue, which region is your phone in? have you tried updating your software through HTC website?
For Romania there is no official version released. I cant upgrade ROM/Radio without losing my warranty.
i had the same problem after installed a hot fix from HTC, even hard reset and reinstall the ICR program the phone just lockup when I made a call. I can talk in that call but the whole phone just won't response to any keys or touch screen. After 2 days playing around with countless hard reset I decided to flash the same ROM from computer and the problem seems gone now.
SneakyR said:
For Romania there is no official version released. I cant upgrade ROM/Radio without losing my warranty.
Click to expand...
Click to collapse
Sure you can You are currently using a WWE ROM right? You can use USPL or HSPL to flash a newer official WWE ROM. In the event you need to return the phone just flash the original ROM (and SPL) back to your phone and they will never know. The original ROM you are running now is available on the Wiki, and here is a direct link. If you need help flashing ROM's you can read the guide in my signature and post questions in that thread
On a side note- I have had that issue before as well. It does seem like a bug in some software on the ROM as flashing different ROM's seems to make it go away (or reappear )
My phone's screen stopped responding few weeks ago and I brought it to service. They changed its front side with a brand new one (I am not sure if the screen only because I even get better audio quality during calls). I am telling you this just to underline that when I took it back from service the ROM was flashed again (same version though) because the menus used to be in English and now they are in Romanian. So if I am not mistaking my hard resets + services ROM flashing (into the same version though ) didn't fix this issue.
@Digital Outcast:
I am aware that I am able to use a newer ROM. I read the wiki and I know how to do it but if for some reason what I mentioned above (screen completely stopped responding and it was changed) happens while the new ROM is on the phone I will lose my warranty.
Since I opened this issue I changed the sim with a newer one. The old one was 7 years old...
Thank you for your feedback and for letting me know I am not the only phone owner having this annoying bug.
As stated by Tnyynt on another thread
Official updates go by as original ROM, they install without HardSPL if there is an update for your version of the device, so if you have an Official ROM which you have flashed, there's no need to worry for warranty.
Click to expand...
Click to collapse
Basically, any of the official rom updates for your device available on HTC or wiki can be flashed to your phone without HSPL or USPL and will not void warranty.
I tried with this one but when I insert my serial it says its not available for my region.
http://www.htc.com/www/supportdownloadlist.aspx?p_id=179&act=sd&cat=2
Still I managed to download it using some serial I found on the web. But when I started the flashing process it says its not meant for my phone and aborted
Is your phone branded? Did you get it new? I ask because it doesn't look like it was a WWE device...
I bought it brand new from an online store. I didn't buy it from a provider like Vodafone or Orange.
One of my colleagues bought it from Vodafone few days ago and he has exactly the same ROM version as I have. None of us is able to download the previously mentioned ROM version from HTC website using the imei.
RUU_BlackStone_HTC_WWE_EastEurope_1.14.479.3_Radio _52.49a.25.26_1.09.25.14_Ship is the ROM you currently have on your phone. There are no "official" updates for your particular CID.
Your real only current choice if you want to flash a newer HTC ROM would be to use USPL or HSPL and flash another official WWE ROM. You could always flash back the original if you needed to return the phone for warranty purposes. Sorry bud.
Thanks for summing it up for me.
PS: changing the sim with a newer one did not help, in case somone wants to do this.
Hi guys, anyone know the way to overcome this?
How to upgrade to a higher ROM?
Even HTC's website won't let me downloading the ROM saying that the upgrade aren't for this device!!!
Please!
p.s. sorry I'm new to winmo...
regards!
use a gold card in sd slot or just install HSPL first
wtf is a gold card? i keep seeing people refer to it but never what it is, i imagine its a sim card with a toffee penny wrapper stuck to it lol
http://forum.xda-developers.com/showthread.php?t=591314
Basicly its a sd card with its unique serial number run though some software but as its no longer free just use hspl if you dont have a goldcard.
Forget about the goldcard, you don't need one so long as you have a copy of the original rom available, which you do. Hunt it out in the official roms forum. First post, first link, 1.43 section, its listed there. Thats your backup, then instal hspl and you can flash what you like.
Your HD2 is locked to o2 (UK) ROMs only so you cant put any of the official HTC ROMs or any of the custom ROMs from the "HD2 ROM Delvelopment" forum
http://forum.xda-developers.com/forumdisplay.php?f=534
because of this your always be running out of date software as the phone operators are always so slow at releasing updates if they do at all.
BUT if you download HSPL from the above forum thread "[HSPL] HowTo flash everything"
http://forum.xda-developers.com/showthread.php?t=611433
and install it to your phone your then be able to put on any ROM you like. Don't worry its near impossible to muck anything up and you can always put the phone back to its original rom, just do a little reading if your still not sure.
Great Guys! HSPL helped!!! I've upgraded...shame I can't manage to download Rom 1.66 as it always crashes and the download in general is sooo slow (not the internet issue)...but maybe with a bit of patience I'll get it at the end!
Cheers once again!!!
essensial said:
Hi guys, anyone know the way to overcome this?
How to upgrade to a higher ROM?
Even HTC's website won't let me downloading the ROM saying that the upgrade aren't for this device!!!
Please!
p.s. sorry I'm new to winmo...
regards!
Click to expand...
Click to collapse
HTC have now listed a new ROM upgrade (1.72.206.3 released 27/04/10) for the HD2 on their UK support website (htc.com/uk)
Let me know how you get on with it as when I enter my o2 serial number I still get the error message you mentioned. I have sent a message to HTC support...just waiting for a reply.
shutty2k3 said:
HTC have now listed a new ROM upgrade (1.72.206.3 released 27/04/10) for the HD2 on their UK support website (htc.com/uk)
Let me know how you get on with it as when I enter my o2 serial number I still get the error message you mentioned. I have sent a message to HTC support...just waiting for a reply.
Click to expand...
Click to collapse
all you o2 guys that cant down load have been able to get 1.66 from htc's site for months now this rom is purley for the forgoton few (like me) who got the phone as o2 launched and locked down (no wifi router etc) I ran this rom for a day and it nice and snappy fast but its still not wm 6.5.3 so i am back on touch-x again now the 2.07 radio in the o2 rom was quite ok in my area when I used it a few months ago but the 2.10 in my opionion is a match for recption with better battery life just my 2 cents hope it may help some of you
What about Virgin Mobile? Will they get a Rom Upgrqade???? they seems to have been left out of the loop even though they were the first (technically second) carrier of the phone.
hi ok so before you jump on me yes i did "UTFSE"
nothing quite seemed to fit and after trawling thro pages and pages of results i decided to bite the bullet enable flame shield and post a question.
is it possible to load an O2uk rom over the top of the tmobile rom
the tmobile rom is "1.72.110.4 (86525) WWE"
i'm on o2 and hate looking at all the crappy webnwalk rubbish and all the tmobile branding
I'm a total noob to HTC HD2 and Windows Mobile this is my very first device and have waitied some month to procure myself one lol
can someone help and let me know if it is possible and location to a factory rom for o2 or alternatives i'm open to suggestions
thanks... oh and HI community
sure. It wont go over teh top of it, but yes, it will replace it.
get hspl3 from my sig, run it, (with phone connected to usb) choose 2.08.hspl (NOT 2.08.0000, that's a stock spl)
get for example, the 1.66 wwe (world wide english)rom from the hd2 stock roms thread HERE (first post, first link, 1.66 folder)
run the .exe and it will flash over usb.
the phone will be like unused, so be sure and back up your data.
as long is it's not a tmobile usa phone- different memory config: bad for phone
it would already be a brick if it were a tmous, considering it is already running 1.72.110.4 (86525) WWE, , , hehehe
out of interest, why would you want to swap one provider branded rom for another? I'd go for the 1.66 wwe if i were you, , dont think that the 02 1.72 rom is updated, its teh same as 1.66, it just already has teh three or so updates applied, and it includes operator branding.
if you really want to flash the hd2 then i would suggest flashing one the roms from here. energy rom would be my choice..
thanks for the info guys
sorry been busy last few days
@samsamuel
Thanks for the info i'll try and do some more reading and try your method thx
and i wanna change the operator branding cuz i'm just picky lol its annoying clicking links on twitter and facebook and sms's etc and being taken to WEB 'n' WALK opera mobile browser even tho i've installed opera 10 for it :S its little annoying features that p me off lol with the o2 rom it would be as if its factory reset straight from o2 without me having to mess with too much stuff
i'm still a noob in such matters - don't wanna run before i can walk.
i've noticed the version i have installed ALREADY has some of the updates and tweaks included on the forums......
@Dumbquestion...... how would i tell if its a tmobile USA one? i'm pretty certain its not but i'd like to make sure.
i'm currently out of work and running on a shoestring budget and have saved up a long while now to buy this lol just dont wanna turn it into a £270 Brick lol
heh, well first, the web n walk stuff is down to t mo using a proxy, so you can forget that with o2.
in all honesty, go for the unbranded wwe 1.66 (in fact as of february o2 started shipping unbranded phones anyway, only some of the o2 customers can use that 1.7 o2 rom without needing hspl)
as for confirming its a u.k tmo phone, with the rom that's on it can't possibly be a tmous, they can only take roms v 2.x or better., however other ways to tell are
tmous has green send key red end key, 1024meg storage, and it says t mobile beneath the earpiece.
ahhh thats great news then.... i'm gonna go read up on the flashing and stuff before i even attempt anything
thanks for your help guys MANY thanks
oh one final thing..... can i back up the rom thats currently installed ? and re flash that back if and when i need to ?
well you can, but its not easy, and its pretty pointless. In the rom development section there is a thread called official roms or some such.(look in the 'list of stickies' sticky to find it)
In there, first post, first link, is a whole load of all the various official roms. All the wwe ones, most of the operator branded ones, most of the tmous ones (you can flash any rom, and any radio, , its only t mobile US (tmous) users that need to worry, so dont fret about that)
ok cool some sound advice thanks a lot
Hi Guys, First off I would like to thank everyone for all their amazing ROMs.
I'm a long time lurker, first time poster. So I think the entire chef community need a big round of appluase before I start.
So here's the deal, I lost my HD2, got it barred, Sim and Phone, then, Someone recovered it!
I asked O2 to unbar it, Could not be done. 6 Days on and my phone remains barred. What is weird is that other network SIMs work in my phone, and my SIM works in other handsets. Ya. Pretty freaky.
Anyway, they want me to send it in for repair / replace. Need to make sure I have everything Stock so they don't go "LOL U BRICKED IT AND VOIDED WARRENTEH SUX FOR YEW"
About to Flash RUU_Le2_UK_1.72.206.3_Radio_CRC_Signed_15.32.50 .07U_2.07.51.22_2_Ship.exe (From 4shared shared folder with teh stock ROMs)
From what I've read this should solve my worries. I just want confirmation on this and/or any advice on what I would have to do to return it to factory Settings so they don't PWNnarf me for using the HD2 to it's full potential.
Thanks again to the whole community ;D
If your phone is O2 UK branded, then that should be fine. Once it is flashed, check that the ROM and RADIO are correct and boot up in BootLoader mode and check that the SPL is 1.66.0000 and not ending with .HSPL
It does end in hard HSPL after flashing a stock ROM. Anyway to fix this?
If it helps at all, I had the New windows phone 7 ROM before this, if that makes any difference ;3
EDIT: DISREGARD THIS I found a solution. Close thread or summat.