My phone application is hanging when dialing a number but receives fine and send and receivs sms fine. does anybody know of a replacement phone application for the k-jam?
Thank you.
Unbeleivable. hahaha . i use a postpaid card with a call cost limit feature. i thought that this feature was inforced by the phone since i used to reset it from the phone. when i switched to the k-jam it does not show the call cost limit but it still inforces it . i put the sim card in a friend's phone and lo and behold it shows an amount of 0 units available and it does not allow me to dial , i reset the limit and IT'S ALIVE .
Now how can i manage this feature from the k-jam, it seams it's a sim feature and it requires entering the pin2 code to modifie it.
if not tool is available maybe i can right one if pointed to the right API to use.
Thank you all.
I have a colleague with a HTC P3600 GER, he complains that sometimes when he presses green button to answer a call or red button to end the call the device becomes unresponsive and he has to soft reset the device.
Is this a known problem?
Problem 3G -> GSM
Hi !
Same issue with my device but only in one condition:
I get an incoming call within a mixed 3G/GSM provider network (A1-Vodafone Austria) - i press the green button and my Trinity switches from 3G to G - the call seems to be answered but i cannot hear anything.
----->I wrote the following error description to HTC:
Massive problem answering phone calls in mixed GSM/UMTS network.
My P3600 works fine when the display shows 3G Network. Answering a call works fine by pressing the left phone button. The display closes the caller bubble and switches to the connected status and shows caller and time and so on. But every time the phone is connected to only GSM radio station - display shows "G" beside the antenna icon i cannot answer a single call. Pressing the left phone button results in showing the white bubble with caller information and nothing happens - the call doesnt start the calling party always hear the normal beep tone while waiting for pick up of the phone. In this circumstances i cannot hear anything from speaker and also cannot end the call by pressing the right phone button (hangup) - the software of the P3600 stops responding and the caller bubble is frozen at the display. When the call is discontinued by the caller the P3600 resets to normal activity waiting for a call and showing a missed call !! This happens at every GSM call - about 10 t! imes since yesterday !! It is very important for me that i can answer calls in both network connection modes because the austrian provider A1/Vodafone has mixed environment all over the country. The receipton of GSM while the problem comes up is always more than 2 or 3 bars on antenna display.
Hope that there is some possible solution for this problem.
ROM Software Version is:
1.16.407.2 (German)
Setting for network provider is:
Automatic
Band selection is:
Auto
Auto
Many thanks in advance !!
Gerhard from Austria
----->The answer from HTC was:
Hello
This seems to be a very strange issue that you are experiencing and something that we have not heard of before.
Does this occur every time that you receive a call in a non-3G area?
I would recommend that you perform a Hard Reset on the device. This will restore the device back to the factory software settings. This will also remove all settings, contact , calendar information as well as any files and SMS.
Once this has been performed I would ask you to test if this has resolved your issue. If this has then you should experience no more issues. If this does not solve your issue then I would recommend that you contact your local repair center, details below, to arrange a repair of your device.
+ 43 (0) 508115555
[email protected] <mailto:[email protected]>
Yours sincerely
Dan Mackie
[email protected]
http://www.htc.com
----->The Hardreset does not fix the problem :-(
Still waiting for a firmware upgrade ....
Gerhard
Since Uprade to Radio ROM 1.41.00.11 (http://forum.xda-developers.com/showthread.php?t=304006) i have no more problems with answering phone calls !!!
Hope the Radio ROM will be included in an official ROM Upgrade from HTC soon.
Gerhard
Hello
Some days ago I received my HTC Shift and I am very satisfied!
Unfortunately there is one strange Problem:
I am using a MultiSIM by T-Mobile, that means I have one number for multiple devices.
If the HTC Shift would make phone calls and someone calls me, the shift and my MDA Vario III would be ringing.
When I activate the Modem in my Shift it seems the Shift receives phone calls and then denies them! So nobody can call me when I am using my shift, since all calls are directed to my mailbox
Has anyone of you an idea what can I do?
(btw: I unlocked my Shift already to full WM6 )
The shift doesnt support phone calls...even if you have on sim card it wont ring
Use it for its gprs/edge/3g and sms sending n receiving
rdosti said:
The shift doesnt support phone calls...even if you have on sim card it wont ring
Use it for its gprs/edge/3g and sms sending n receiving
Click to expand...
Click to collapse
Hello
thats exactly what I like to use the shift for. I am not interested in making phone calls with it.
But the Shift is blocking calls, which should also arrive on my mobile phone...
I think HTC has made this blocking to avoid connection problems when somebody tries to calls the shift (which is not supported).
Is this right?
Might work?
I don't know for sure about T-Mobile. I am using a similar service (they call it "FlexiCard") from E-Plus. They have a function that allows you to designate one of your SIM cards as the primary card. This is the card that will receive calls (and SMS) first, only if this card is not active (phone turned off) or busy a call or SMS will be routed to the other card.
However, there seems to be a service difference between T-Mobile and E-Plus: I have the SIM card in my Shift still designated as the "primary" card. If the modem is turned on, this is interpreted by E-Plus as "busy", so calls go to my phone (which holds the "secondary" card). If the modem is turned off, the SIM card in my Shift is obviously inactive and not visible to the mobile network. So the only reason for me to switch "primary" vs. "secondary" would be to continue receiving SMS messages on my phone rather than the Shift. Unfortunately, for SMS E-Plus does not bother whether the "primary" card is active / busy or not, SMS always go to that card (understandable when you look at how SMS works on mobile networks).
If you don't find any information about switching primary/secondary card in your documentation that came with the card I suggest contacting the T-Mobile hotline. They should be able to tell you whether this functionality is available with your "MultiSIM" and how to switch "primary" between the cards.
Thank you mw65719 four your tip.
I just phoned with T-Mobile support.
They don't support it like Eplus to switch between SIMCards.
It is just possible to define a primary card for SMS service, not for phone calls. Whenever someone calls me both phones are ringing.
So I will have to buy a new contract with T-Mobile just for data transfer, which is more expensive than the combination of phone/data contract.
I have the same issue with the MultiSIM from t-mobile. Both phones (the other one is a Touch) are ringing, after the first ring a line-busy message is generated.
Seems that the Shift in canceling the incoming call after the first ring.
Does anyone has an idea to solve this problem instead of splitting the MultiSIM into two separate contracts?
Have just opened a suuport case at HTC Europe concering this issue. Seems to be a German (and t-mobile) specific problem.....
speech service ?!
gsiakoe said:
Seems that the Shift in canceling the incoming call after the first ring.
Click to expand...
Click to collapse
find out how the call canceled
a: is it the 3g modem that set the networkstatus to -> data service only
b: or a apllication that will call canceled - reason busy
see here what i mean
http://www.t-mobile.de/downloads/laptop/hyperterminalmulti-sim-anleitung.pdf
I think it's part of the WinMo/SnapVue side.
Vista enables a lan connection with WinMo for internet.
So there could be settings in the registry to enable/disable this busy status.
I try to find somethin, but unfortunately i'm not a pro like others here in the Board.
Where are you folks, on Planet Mars, everyone and all documents I read say that the Shift cannot support phone calls???????
alexn2 said:
Where are you folks, on Planet Mars, everyone and all documents I read say that the Shift cannot support phone calls???????
Click to expand...
Click to collapse
it can be made to recieve them though. we all say Bengalboy's pics. about the phone calls being blocked. that does suck. i guess we have to wait till the phone side is re activated.
Idea how to activate phone pad
Pawel062 said:
it can be made to recieve them though. we all say Bengalboy's pics. about the phone calls being blocked. that does suck. i guess we have to wait till the phone side is re activated.
Click to expand...
Click to collapse
I had some phone calls with T-Mobile Business support and they told me a trick how to activate the phone function, but I dont get this to work.
What I have to do is the following:
1. Download and install a hyper terminal application on Windows mobile (I found http://www.cambridgevx.com (Server seems to be down at the moment))
2. Open a direct connection to the modem
3. Enter the following commands:
3a: AT_odo?
(this should show 1 which means speech is deactivated
3b: AT_odo=0
(speech is beeing activated)
4. Reset Windows Mobile and the phone should be activated
I was told this is known to work on some data modems and should work on the HTC Shift too.
But always I try setp 2 I get an error "cannot open data connection"
Has anyone an idea?
Irgendware said:
I had some phone calls with T-Mobile Business support and they told me a trick how to activate the phone function, but I dont get this to work.
What I have to do is the following:
1. Download and install a hyper terminal application on Windows mobile (I found http://www.cambridgevx.com (Server seems to be down at the moment))
2. Open a direct connection to the modem
3. Enter the following commands:
3a: AT_odo?
(this should show 1 which means speech is deactivated
3b: AT_odo=0
(speech is beeing activated)
4. Reset Windows Mobile and the phone should be activated
I was told this is known to work on some data modems and should work on the HTC Shift too.
But always I try setp 2 I get an error "cannot open data connection"
Has anyone an idea?
Click to expand...
Click to collapse
problem there is no phone pad aka dial pad in production models as far as i know. so even if u can re enable it u wont have any images etc... it'll most likely require a custom rom or if we get lucky a cab.
Pawel062 said:
problem there is no phone pad aka dial pad in production models as far as i know. so even if u can re enable it u wont have any images etc... it'll most likely require a custom rom or if we get lucky a cab.
Click to expand...
Click to collapse
I am not interested in using the phone pad.
I like to solve the busy line problem (read some posts above). When activating the speech on modem side, this would be solve and I could use my Shift with my MultiSIM-Card
Irgendware said:
I had some phone calls with T-Mobile Business support and they told me a trick how to activate the phone function, but I dont get this to work.
What I have to do is the following:
1. Download and install a hyper terminal application on Windows mobile (I found http://www.cambridgevx.com (Server seems to be down at the moment))
2. Open a direct connection to the modem
3. Enter the following commands:
3a: AT_odo?
(this should show 1 which means speech is deactivated
3b: AT_odo=0
(speech is beeing activated)
4. Reset Windows Mobile and the phone should be activated
I was told this is known to work on some data modems and should work on the HTC Shift too.
But always I try setp 2 I get an error "cannot open data connection"
Has anyone an idea?
Click to expand...
Click to collapse
souds interesting ! .. have you try some scenarios ? with 3G enabled, with 3G disabled, with wifi enabled, with wifi disabled ... etc ?
I can't try myself.. but as there are data connection through 3G.. I think that it is possible to find a solution to the step 2 !
Anybody found a solution for this?
Getting my shift soon, and im going for a twin sim solution. would suck if i cant get phone calls on my kaiser cos the shift is on in snap vue mode and rejects the calls.
I am experiencing the same Problem with my Shift.
It is crazy, because my Mobile rings a halt time, then the Shift rejects the call. Afterwards, I have to call back.
The problem should be able to solve, but you have, anyhow, to tell the shifts modem not to reject voice calls. Still, I do not know how to tell the modem
Hello?
Has anyone resolved this issue? I'm a new MultiSIM user, and the idea of not having any internet with my shift is ****ing me off (that would make it as useful as a brick ).
Any resolution is appreciated.
Cheers.
HI @ all, i don´t know, if you fixed that problem.
I´m a multi SIm user too. With the original Radio Version (shipped with german SHIFT) the same problem. After that, i update the radio Version to the Phone edition radio Version:
see:
http://forum.xda-developers.com/showthread.php?t=486234
(but here always my WinCE Side was really slow??) so I Downgrade back the phone edition
1.27.35.28 and ce OS version 5.2.1620 (I00 ROm I think)
And now, Phone is working, and never the Multisim usage hangs up.
I don´t know why, i play every 1 month with Shift and upgrade, downgrade something, then the most time shift is not in use, so i don´t make a history what happend...
:-(
But with the new radio Version it will work.
maybe this rom work too:
Cmonex posted another radio for backup. This radio is for original rom (ie all other roms from the forum). Look for the link on page 5, or here
http://rapidshare.com/files/20211808...ift1582123.zip <- this is not for the phone or for this rom
Mirror: http://www.mediafire.com/?sharekey=7...e6ba49b5870170
Irgendware said:
Hello
Some days ago I received my HTC Shift and I am very satisfied!
Unfortunately there is one strange Problem:
I am using a MultiSIM by T-Mobile, that means I have one number for multiple devices.
If the HTC Shift would make phone calls and someone calls me, the shift and my MDA Vario III would be ringing.
When I activate the Modem in my Shift it seems the Shift receives phone calls and then denies them! So nobody can call me when I am using my shift, since all calls are directed to my mailbox
Has anyone of you an idea what can I do?
(btw: I unlocked my Shift already to full WM6 )
Click to expand...
Click to collapse
it happens with all multiple sims when you have all the devices activated!!!...
when you have multiple sims and you have all the devices open...
which device should accept the call ??
it does not work as douplex land line... not all of your mobile devices should ring at the same time ... obviously the one that was opened first and got the signal from your provider should get the line...
the twin sim solution works fine with me ... plus unlimited internet access from phone and the shift...
BUT one device open at a time ...
Hi Every1!!
I have used HTC Tytn with Windows Mobile 5 previously... today I have bought another one with windows mobile 6 professional...
It was prefectly alright... I tried GPRS/Edge... Msging... Calling... Everything....
I tried to install persian language... it asks for reset... I do it... and after that my HTC stops at Windows mobile logo for a long time... I reset thrice and then take out the battery pack... remove SD Card... Remove Sim... and it works...
But after that when i have inserted sim it shows No service...
Although i have tried to change the automatic network selection to manual from Start> Settings> Personal> Phone> Network
It shows all the services availble in my country but when i select the one i am using.. It first shows the message box registring sim on the network.. and then the same error...
I have tried multiple sims but not a single sim works.. while the same sims are working absouletly great in the other sets
Can any body help me to solve this problem...
I guess it is due to windows mobile 6... can any body guide me how to uninstall wm6 and install wm5!!
If you bought the Hermes 2nd hand it could have been reported stolen meaning that you won't get it working on the network. It may also be locked but I'd suggest checking with your network if it has been reported stolen. You'll need the IMEI number, dial *#06# to get it.
If its not you could try to sim unlock it.
Cheers...
but i m able to recive msgs on that sim... how is that possible if set is blocked??....
I have searched on the internet.... this problem also arises to other uers who upgraded from WM 5 to WM 6.. thats why i have thought that this problem is due to WM 6..
Any body guide me how to unistall WM6 and install WM5
Well hello in the first line ... I have one big question and I never found any answer about this or any ideea what means:
I bought few days ago one N3 9005 Snp D chipset etc etc .... and they sended me a 4g sim card sayng to be activated only with that phone/tablet/smartthablet ... Well I did it ... but later i tryied to put back my old SIM Card from another plan and from then it happened
1. Strange reboots ( when I put the phone in GSM only mode ) , no network... network selected is not available bouth SIMS are 4g different plans same network Vodafone.
2. When I insert another SIM from Orange in GSM/WCDMA Mode ....saying ... Atention The Network selected Vodafone is not available please try a new search .. well I did .. the networks apear and i try to register it takes like 10-15 minutes at the end is registering but FC .. again the message shows Atention The Vodafone network selected is not available .
I switch to LTE /Auto mode ... everything is fine I can call in Orange/ Vodafone /Cosmote /even I tryied a SIM card T mobile everything is great I can call ... even do sms /push notifications .. until I select again GSM only mode .. when I leav the Metropolitan area and going to country ... when this happen HELL IS coming ... what can it be ?!?!.
I never heared some of you having this problem .. I tryied : STOCKL ROM area SEE/UE / ROOT/ Region Unlock Away .. several things I guessed it was the EFS etc etc ... well EFS IS good I did Back up restored everything is fine ... unless those mentionet above.
3. Another thing : when SIM register in GSM/WCDMA mode .. I can initialise only 2-3 calls .. or receive 2-3 calls from my friends .. after that it shows nertwork like is fine and .. after 20-30 minutes my friends call me on another number saying come oon dude you keep your phone close .. something wrong ? What to say I never close my phone is allways open ... and some other strange thing when .. reboot the phone ... and retry to be if is ok ... I hear a sound like .. the network fail to initiate my call .
4. Yesterday I figured out that in the back space of the battery place .. some oil liquid apeared and is anoying to see that is like when .. the battery leaked or something like that .. but I checked .. to service .. they sayid is normal ?! WTF ?
pisicutumic said:
Well hello in the first line ... I have one big question and I never found any answer about this or any ideea what means:
I bought few days ago one N3 9005 Snp D chipset etc etc .... and they sended me a 4g sim card sayng to be activated only with that phone/tablet/smartthablet ... Well I did it ... but later i tryied to put back my old SIM Card from another plan and from then it happened
1. Strange reboots ( when I put the phone in GSM only mode ) , no network... network selected is not available bouth SIMS are 4g different plans same network Vodafone.
2. When I insert another SIM from Orange in GSM/WCDMA Mode ....saying ... Atention The Network selected Vodafone is not available please try a new search .. well I did .. the networks apear and i try to register it takes like 10-15 minutes at the end is registering but FC .. again the message shows Atention The Vodafone network selected is not available .
I switch to LTE /Auto mode ... everything is fine I can call in Orange/ Vodafone /Cosmote /even I tryied a SIM card T mobile everything is great I can call ... even do sms /push notifications .. until I select again GSM only mode .. when I leav the Metropolitan area and going to country ... when this happen HELL IS coming ... what can it be ?!?!.
I never heared some of you having this problem .. I tryied : STOCKL ROM area SEE/UE / ROOT/ Region Unlock Away .. several things I guessed it was the EFS etc etc ... well EFS IS good I did Back up restored everything is fine ... unless those mentionet above.
3. Another thing : when SIM register in GSM/WCDMA mode .. I can initialise only 2-3 calls .. or receive 2-3 calls from my friends .. after that it shows nertwork like is fine and .. after 20-30 minutes my friends call me on another number saying come oon dude you keep your phone close .. something wrong ? What to say I never close my phone is allways open ... and some other strange thing when .. reboot the phone ... and retry to be if is ok ... I hear a sound like .. the network fail to initiate my call .
4. Yesterday I figured out that in the back space of the battery place .. some oil liquid apeared and is anoying to see that is like when .. the battery leaked or something like that .. but I checked .. to service .. they sayid is normal ?! WTF ?
Click to expand...
Click to collapse
In my experience certain operators use very sh*tty baseband versions that are very specific to their network - I have seen quite a number of Orange Galaxy S2 models that had that exact weird problem when the phone starts OK and then 30-60 minutes later it goes away from the network and you can no longer receive calls (but you can perfectly make those calls). The fix for those was to write latest official Orange ROM (and make certain that any carrier-unlocking was done in a way that does not f*ck the modem).
I would also seriously document the problem with the oily/watery stuff (photos + writing communication to service) - sh*tty carriers (Orange included) very often deny any form of service at a later time based on anything that triggers the (many) humidity detectors from inside the modern phones.
Atention danger
xclub_101 said:
In my experience certain operators use very sh*tty baseband versions that are very specific to their network - I have seen quite a number of Orange Galaxy S2 models that had that exact weird problem when the phone starts OK and then 30-60 minutes later it goes away from the network and you can no longer receive calls (but you can perfectly make those calls). The fix for those was to write latest official Orange ROM (and make certain that any carrier-unlocking was done in a way that does not f*ck the modem).
I would also seriously document the problem with the oily/watery stuff (photos + writing communication to service) - sh*tty carriers (Orange included) very often deny any form of service at a later time based on anything that triggers the (many) humidity detectors from inside the modern phones.
Click to expand...
Click to collapse
I just spoked with service guys and showed them the liquid that after some test is electrolite inside the acumulator ( battery ) that leaked from inside becouse they say " several batteryes are made with a small defect/bug and they leaked but is not mentioned how many or if is a lage scale problem .. they just say to change silently and quick the battery " I was crazy when I heared that and first they sayd is my fault becouse I used the device and it becomes very hot ... probably becouse they tryed to full me .
Now ... the prb you just sayd is about ... that NO MORE NETWORK CODES .... ONLY the SIMCARD Activated with teh device can work flawles unless you remove this from the network carrier ... if you activate the mode 4g/lte .... it will be the only mode becouse is the highest .. try to activate first GSM mode only and so one so forth ..... until you get the 1st level .. becouse the device remain activated and set on the 4G/Lte if you do that ... At the end the changed my gadget now everything works fine I activated starting wityh another SIM and step by step register in network ... now I can put .... Orange/including DIgi Mobile Network .. and some other wcdma networks.
PROBLEM SOLVED I MEAN FOR ME ... Don't know for others...