Related
I am on an older plan and I don't want to switch to a more expensive everything data plan since I only use my data plan for email, so I bought a Hero and changed the esn to match the one on my current phone, a Q9c. The esn switch worked fine and I now have phone/texts on my Hero, but neither 1x nor evdo works now. I get Error 67...something about username and password being incorrect. I have no idea how to fix this. I added the username in the ##3282# menu, but I didn't see anything about a password in there. My HA shared secret is 'secret' like I'm pretty sure it's supposed to be, but I don't know what my AAA shared secret is or is supposed to be. Do i have to find this in the Q9c and transfer it over? I'm completely lost. Anyone have any tips or ideas on how I can get my data working?
party1421 said:
The esn switch worked fine
Click to expand...
Click to collapse
Im pretty sure thats why you have not got an answer!
Everyone is going to err on cautious side.
Yeah, the only thing worse then ESN swapping is murder.
I'm not asking how to do an esn swap...just merely explaining all the facets of my problem so someone can help me out. I understand it's a touchy subject, but despite any 'laws' to the contrary I don't feel what I did was wrong. They're both my phones and I'm not stealing service. I think it's ridiculous that Sprint thinks it has the right to tell me which phones I can and can't use on my plan. I wish I had a gsm provider...I don't think this would be as much of a problem.
Anyway, I really don't want this to get off topic. The only thing that should matter is I am getting Error 67 when I try to make a data connection. How do I fix this? Should I call Sprint...will they give me data connection settings? Do I have to find a way to get the AAA shared secret off my old phone? Am I just screwed? Anyone have any experience with this? Thanks.
I feel your pain. Try going into... Menu > Settings > About Phone > System Updates and Update Profile.
Hope it works.
Thanks for the tip. I tried it and the screen reads "The network is preparing your services. Please wait." Then the Error 67 window pops up a couple times, and after a few minutes the screen reads "The profile update could not be completed. Please try again later. If the problem persists, you may need to contact Customer Service. Error code:1012". Thoughts? How does this update work anyway? Does it use the data connection to update?
Had this problem before, spent hours with a Sprint's advanced tech support to try and solve the problem. The problem occured when I switched from one custom rom to another, then I restored a nandroid backup of the previous custom rom on top of it. My Hero starting bugging out after this. They couldn't help solve the problem, but they also didn't know about my flashing spree.
The only way I solved the problem was to RUU to Sprint's official rom. Even after I did this it took about 24hrs to register with Sprint for some reason.
Good luck.
Either RUU or reset to factory default on the phone.
I wouldnt call sprint. Them probably already know somethings not right.
You copied the MEID DEC number off your q9c to the hero.
So what sprint sees is a MEID DEC number of a Q9c
And they also see a MEID HEX of a HTC HERO.
I belive this is how it is, i could be wrong.
I say this because ive been told that the Hexadecimal numbers are specific to a general device (EG>>HERO)
And that a Decimal Numbers are specific to the end user device
So they got a Q9c trying to provision as a HERO
party1421 said:
I am on an older plan and I don't want to switch to a more expensive everything data plan since I only use my data plan for email, so I bought a Hero and changed the esn to match the one on my current phone, a Q9c. The esn switch worked fine and I now have phone/texts on my Hero, but neither 1x nor evdo works now. I get Error 67...something about username and password being incorrect. I have no idea how to fix this. I added the username in the ##3282# menu, but I didn't see anything about a password in there. My HA shared secret is 'secret' like I'm pretty sure it's supposed to be, but I don't know what my AAA shared secret is or is supposed to be. Do i have to find this in the Q9c and transfer it over? I'm completely lost. Anyone have any tips or ideas on how I can get my data working?
Click to expand...
Click to collapse
Are u a female?
DirtyShroomz said:
Are u a female?
Click to expand...
Click to collapse
no. wrong forum...you must be looking for eharmony
blulitespecial said:
Either RUU or reset to factory default on the phone.
Click to expand...
Click to collapse
Correct me if I'm wrong but RUU is basically just reflashing the phone with the factory software, no? Assuming so, why would I need to do that? I'm working with a Sprint Hero that hasn't been flashed/rooted so I'm pretty sure it's still running the original software.
Anyway, I'm pretty desperate (and a hard reset doesn't seem to have fixed anything) so I'm willing to try anything if it has a chance of working. Is this the RUU I should use?
http://forum.xda-developers.com/showthread.php?t=572541
party1421 said:
no. wrong forum...you must be looking for eharmony
Click to expand...
Click to collapse
No im just 100% positive that ur the female or maybe boyfriend of the female that was yelling at me today for the phone not working and feeding me some bs story about the hero being the worst phone ever and how this was a "replacement"... However as soon as I asked if u were rooted u calmed down and listened to everything I said. Let me guess you r on free & clear 3000, unl text/web/roaming all for a staggering $20?. I know u wont admit it but thanks for being the 1 asshole I had at work today
DirtyShroomz said:
No im just 100% positive that ur the female or maybe boyfriend of the female that was yelling at me today for the phone not working and feeding me some bs story about the hero being the worst phone ever and how this was a "replacement"... However as soon as I asked if u were rooted u calmed down and listened to everything I said. Let me guess you r on free & clear 3000, unl text/web/roaming all for a staggering $20?. I know u wont admit it but thanks for being the 1 asshole I had at work today
Click to expand...
Click to collapse
You need to take a chill pill homie. I'm on a good ol vanilla $30 SERO plan. Since apparently you're cs...out with the ideas. You know the system.
party1421 said:
You need to take a chill pill homie. I'm on a good ol vanilla $30 SERO plan. Since apparently you're cs...out with the ideas. You know the system.
Click to expand...
Click to collapse
Lol same thing I told the "other" person, system will take it but its not stupid and wont work, sry
DirtyShroomz said:
Lol same thing I told the "other" person, system will take it but its not stupid and wont work, sry
Click to expand...
Click to collapse
So you're saying I'm fighting a losing battle...and mobile data will never work?! Got any techie details? I'm curious as to why it couldn't be fooled assuming the settings were identical to my Q9c
party1421 said:
So you're saying I'm fighting a losing battle...and mobile data will never work?! Got any techie details? I'm curious as to why it couldn't be fooled assuming the settings were identical to my Q9c
Click to expand...
Click to collapse
Far from a techie so sorry no specifics.
DirtyShroomz said:
Are u a female?
Click to expand...
Click to collapse
That isn't weird at all to ask unless you think you know this person
I had this happen to me the other day. Well, all of my stuff is legit, but Error 67 was poping up on both my phones.
They had me do this:
##3282#
Wait for a second - its slow
enter your MSL(Not sure if you need the old phones or the Hero's MSL)
GO into EDIT mode
Email address should be [email protected] - They had me change mine from FirstLast01 to [email protected]
Click Menu
Tap Comit(I Think, Maybe Restore..I can't remember)
Reboot the phone
Handsfree activation MAY kick off.
Got to Menu>Settings>About Phone> System Updates> Update Profile
Let it spin...
Turn the phone off, pull the batter for about a minute.
reboot the phone.
thatguythatdid said:
That isn't weird at all to ask unless you think you know this person
Click to expand...
Click to collapse
I did think I knew them
Anyone know?
I've got a friend with tzones who tried his sim in my vibrant and it worked as expected, 3g and all with no settings changes. The only oddity is that with my sim the carrier name is "T-Mobile" and with his the carrier was "T-Mobile|Get More".
If you have grandfathered $5.99 plan it should work, you might need to call CSR to make sure they enable it for android
No, it will not work. I've posted about this already, if you want to go dig up the other thread.
Basically, it will work for about six hours, before T-Mo updates your profile with the IMEI number for the phone. Once they do this, T-Zones access is blocked, and you are told (through annoying pop-ups) to subscribe to the Android plan.
It will work just fine, until they put that block on your account. In sum, 'No'.
Is it possible to get around this restriction ? I'm on the grandfathered tzones plan I do not want to lose it by switching to Android data plan.
There is not a way to work around it. As said above, the system updates with the imei and blocks web access. The pop-ups will continue untill you stop trying or downgrade your phone to a basic handset.
Sent from my SGH-T959 using XDA App
lqaddict said:
If you have grandfathered $5.99 plan it should work, you might need to call CSR to make sure they enable it for android
Click to expand...
Click to collapse
It will not work. You may be lucky and have it work maybe like a day or 2, but you will soon get a notification that you need to upgrade, and your internet will stop working.
good luck.
I know a lot of folks plan on tethering their Xooms, but I thought I would actually try activating it since I'm not on contract and can cancel/suspend at any time.
I go into Settings > Wireless & networks > Mobile networks > Activate device, I touch 'activate', it works for a moment, then errors out saying "Unable to activate mobile data service. To try activation again, touch Try Again."
I've seen other folks complain about this, but I didn't see a solution. Is it something obvious I'm missing, or do I actually have to call in to VZW and do it over the phone? If the latter, that's really a letdown, considering I can activate a new phone in seconds without talking to a CS rep. Just thought I'd ask to see if I'm missing something before I call.
Sent from my Xoom using XDA App
Did you activate it with Verizon? ie, do you have a Verizon account and have activated it either with BestBuy, Costco, Verizon store, or over the phone? You have to register the device with the company first. Phones are the same way on Verizon. AT&T and T-Mobile use Sim cards instead, and they are already 'active'.
If not, press the SKIP button on the bottom right to activate over WiFi. It's not worth the $20/mo for 1GB and $35 activation fee.
Yup, I was one of people that was having a lot of trouble with this. The device wont activate by it self,this is what you have to do you have to go to the verizon website and go to their phone activation page and enter your Xooms MEID HEX number (found on the plastic wrap which was covering the back, when you first unboxed it, so make sure you didnt throw away the plastic wraping). From there, you just have to follow the on screen instructions. Also the website asks for your SSN and your Drivers license number for credit approval (this took a whole day) after that they will contact you saying you are ready and that now you can go into settings and network and click activate device.
Also if you by any chance threw away the plastic wrapping, you can find the MEID HEX number on the Xooms box itself. Also to get to the verizon activation site faster al you have to do is google "verizon activation" ----> then click on the second link "Activate Your Verizon Phone | Verizon Wireless" then just enter your Xooms MEID HEX number.
sunnyd119 said:
Yup, I was one of people that was having a lot of trouble with this. The device wont activate by it self,this is what you have to do you have to go to the verizon website and go to their phone activation page and enter your Xooms MEID HEX number (found on the plastic wrap which was covering the back, when you first unboxed it, so make sure you didnt throw away the plastic wraping). From there, you just have to follow the on screen instructions. Also the website asks for your SSN and your Drivers license number for credit approval (this took a whole day) after that they will contact you saying you are ready and that now you can go into settings and network and click activate device.
Click to expand...
Click to collapse
THANK YOU, this is what I was looking for! I had tried logging into my VZW account to activate a new device, and all it would allow was for a new phone, not a new device/data package on our account. I couldn't even enter an MEID.
Found the link in question, I can enter the MEID and establish new service.
For anyone else wondering:
http://www.verizonwireless.com/activate-phone.shtml
I still find it a bit strange that the entire activation process can't be handled through the Xoom itself - seems like you should be able to enter your VZW account into (if you have one already), pick a plan, click through, etc. Activating a phone on an existing line of service is trivially easy via *228, you don't even need to enter an MEID. Not to mention, I do believe you can activate service directly on the iPad, can you not?
I received my Xoom yesterday and after it found my network and I entered the pass key it connected and worked without issue all night. Just got home from work today and it says "no internet connection." It keeps trying to obtain an IP address but just times out and tries again. Its been doing this for a half hour. I tried rebooting it but still the same. Any ideas?
JasonU said:
I still find it a bit strange that the entire activation process can't be handled through the Xoom itself - seems like you should be able to enter your VZW account into (if you have one already), pick a plan, click through, etc. Activating a phone on an existing line of service is trivially easy via *228, you don't even need to enter an MEID. Not to mention, I do believe you can activate service directly on the iPad, can you not?
Click to expand...
Click to collapse
That was exactly my question as well, i think what happened was that Verizon setup according to their original plan, which was to have people activate in store so people would pay for the activation fee and have a credit approval done so that they would have no problems in the future. But due to the recent uproar from the android community about the "required 1 month plan" they decided to drop the plan at the last minute. So hence the reason why you have to go through all this trouble to activate 3g, because it was never set to be an out of the box activation or at least that is what I would conclude through my experience. iPad on the other hand (was an owner of the iPad) AT&T set it up according to apples request, which was to have the device out of the box ready for activation. They made it simple by allowing people to just create an account and enter their credit card information, and pick their plan. Reasons to why these companies have such a different approach to this situation.....I have no idea. But there probably is a reason, but iam just not aware of it.
broadwayblue said:
I received my Xoom yesterday and after it found my network and I entered the pass key it connected and worked without issue all night. Just got home from work today and it says "no internet connection." It keeps trying to obtain an IP address but just times out and tries again. Its been doing this for a half hour. I tried rebooting it but still the same. Any ideas?
Click to expand...
Click to collapse
1.) I'm in no way calling you stupid, but have you made sure that airplane mode isnt on?
2.) Since you said you tried a restart and that seemed to not work, try restarting your wireless router.
3.) If that doesnt work, just try and disconnect and reconnect to the network.
If none of these work then you might have to call motorola.
I did not realize I would have to pay the activation fee everytime I wanted to have a data plan. That's very frustrating considering it's the same cost as a months data for 3GB. I wanted to turn it off an on as I needed (on a month-to-month basis) but I will probably just leave it off now...kinda makes me want to sell my 3G model and get a wifi only...unless I'm understanding this wrong?
tlogank said:
I did not realize I would have to pay the activation fee everytime I wanted to have a data plan. That's very frustrating considering it's the same cost as a months data for 3GB. I wanted to turn it off an on as I needed (on a month-to-month basis) but I will probably just leave it off now...kinda makes me want to sell my 3G model and get a wifi only...unless I'm understanding this wrong?
Click to expand...
Click to collapse
I read somewhere that you can suspend your account instead of cancelling which will avoid this but I am not sure if this works since I have never had Verizon.
keitht said:
I read somewhere that you can suspend your account instead of cancelling which will avoid this but I am not sure if this works since I have never had Verizon.
Click to expand...
Click to collapse
I looked into that, but it looks like you can only do it for a couple of months, and also only once a year.
Seriously, that sucks. Why charge an activation fee for something that can be done completely automated online? Not like there's some dude sitting there setting all these up manually...just a way to make quick and easy money on VZW's part.
tlogank said:
I looked into that, but it looks like you can only do it for a couple of months, and also only once a year.
Seriously, that sucks. Why charge an activation fee for something that can be done completely automated online? Not like there's some dude sitting there setting all these up manually...just a way to make quick and easy money on VZW's part.
Click to expand...
Click to collapse
I wish they had rollover data like AT&T rollover minutes. That would make it more appealing to keep the month to month service. Verizon is just way expensive.
You can indeed suspend your account here : http://support.vzw.com/clc/plan/
I have not been able to activate my device by the previous link. It gives me a number to call. Anyone else seeing this?
Sent from my Xoom using Tapatalk
bmbriefs said:
You can indeed suspend your account here : http://support.vzw.com/clc/plan/
I have not been able to activate my device by the previous link. It gives me a number to call. Anyone else seeing this?
Sent from my Xoom using Tapatalk
Click to expand...
Click to collapse
Yes, I know you can, but I have read that you can only do it once per year...that's the issue.
3G overseas
I'm trying to figure out if there is a way to activate the 3G overseas. I bought my Xoom a week ago at BestBuy, but I live in Bolivia, so came back to my country and now I'm trying to find out if there is a way I can activate the 3G service here. Anyone? Thanks!
blimpa said:
I'm trying to figure out if there is a way to activate the 3G overseas. I bought my Xoom a week ago at BestBuy, but I live in Bolivia, so came back to my country and now I'm trying to find out if there is a way I can activate the 3G service here. Anyone? Thanks!
Click to expand...
Click to collapse
You need to find a carrier that uses CDMA and ask them if they can activate it. There is no other option really. My first guess would be that there are no carriers like that.
-Bauxite
Sent from my Evo 4G
sunnyd119 said:
Also if you by any chance threw away the plastic wrapping, you can find the MEID HEX number on the Xooms box itself. Also to get to the verizon activation site faster al you have to do is google "verizon activation" ----> then click on the second link "Activate Your Verizon Phone | Verizon Wireless" then just enter your Xooms MEID HEX number.
Click to expand...
Click to collapse
You can find the MEID number by going to settings-->about tablet-->status. It will open a new scrollable window with all sorts of info.
Bauxite said:
You need to find a carrier that uses CDMA and ask them if they can activate it. There is no other option really. My first guess would be that there are no carriers like that.
-Bauxite
Sent from my Evo 4G
Click to expand...
Click to collapse
I think that I have same issue. I bought my XOOM in bestbuy ( US ) and brought it to Europe. Here I have O2 SIM card with 3G Data program. I am trying to use it with XOOM but no success so far.
Bauxite - are you trying to say that 3G module inside of XOOM is different for US as is requred in EU? Are there some different standards of 3G? I am worried that I could save couple of hundreds $ if I bought only WIFI version
moriakoj said:
I think that I have same issue. I bought my XOOM in bestbuy ( US ) and brought it to Europe. Here I have O2 SIM card with 3G Data program. I am trying to use it with XOOM but no success so far.
Bauxite - are you trying to say that 3G module inside of XOOM is different for US as is requred in EU? Are there some different standards of 3G? I am worried that I could save couple of hundreds $ if I bought only WIFI version
Click to expand...
Click to collapse
Why didn't you research what you were buying before spending more than $800? The Xoom you bought is a CDMA device and will not work on GSM networks.
The following is a guide I put together over the course of today about flashing the Samsung Epic 4G to both Cricket and Page Plus. This will work with phones that have bad ESN's (at least, Page Plus and Cricket) -- and with phones that are totally fine and saintly, but maybe you want to go to another carrier for a cheaper rate?
https://docs.google.com/document/d/1E4nNITQnzEoEkkVp4j7k_N_yghvNh_SozuKe3az_Nx4/edit?hl=en_US
In the future, as more information becomes available, I'd like to incorporate other carriers that people are flashing (Metro PCS, Boost), as I find out more. The idea is to build a one-source guide for everything you need from start to finish.
The guide takes you from the very beginning to the very end. PRL's, etc, are all inclusive. I've flashed my Epic to both Cricket and Page Plus successfully -- just like Page Plus's coverage/quality better (and cheaper... but hardly any data -- user Wifi). Even if you don't want to flash, it still has useful things like unlocking your phone for use on any carrier that will take it.
Any comments/suggestions are greatly appreciated.
Just as a note, I'm no longer involved in the Epic community. I migrated on to a newer device. http://forum.xda-developers.com/showpost.php?p=34802383&postcount=72 If you need any help, I will still be available through PM's to the best of my ability.
The HA/AAA shared secrets for Page Plus are not "vzw", trust me. I'm running with full 3G on Page Plus right now and after many late nights I realized the only way to get it was a temporary clone to a Verizon phone so that I could get the proper keys through OTA programming. Unfortunately posting a guide to that would probably get XDA on my/your ass. With the "vzw" password you will technically get 3G but it will be throttled to 1xRTT speed (about .1 Mbps). I don't know if the same is true for cricket or not...
Nevertheless I'm sure someone out there will very much appreciate the time and effort you put into this; props!
So using this guide i can unlock the epic meaning ill still be on sprint, but if i suddenly wanted metro i can just take it to the store and have em flash it?
Sent from my SPH-D700 using XDA Premium App
I request a stickey
I haven't flashed to Metro, but if I can find someone that supports all the features I want, I may give it a shot and write a guide. Does Metro support bad ESN's? (Long story short, got scammed by a Samsung Epic on CraigsList, Sprint said ESN was clear, but is still linked to scammer's account, who refuses to remove, etc, and commit insurance fraud... Talked to insurance and he's in jail now, apparently, but phone will probably be forever blacklisted on Sprint).
Currently, I'm trying to find a provider who can give Google Voice support and Data... MMS I'm not so concerned about. Page Plus is my only "good" option now (a step above cricket, but limited data). Any thoughts? Metro PCS apparently doesn't support Houston, TX when I try to find a plan, either.
EDIT: I may try to give Cricket another go. I've been reading a little bit more and have learned a bit about making Cricket work. Would be nice to try the $45 plan on Cricket to save some $$$. I've talked with some people who claim MMS and Google Voice CAN happen, but it's a little more tricky. Will let you know as I figure it out (must wait a month to not lose $30 from PagePlus).
im confused i dont have these MDN and MIN and your guide says i should have gotten them when i got the phone? is this from sprint and am i supposed to call?
also i got the phone replaced by another epic today. the phone kept trying to auto activate. it still is trying to autoactivate. i swapped the epic out for a nexus the other day. what should i do. if you can pm me and talk over the phone that would be great. my mom is going to new york wednesday and i want to pageplus this phone before she leaves.
I've gotten a couple PMs regarding the HA/AAA keys so I'm going to say this. I would gladly provide them for you guys but that's just not how it works. The keys change every time I (re)activate. They are probably tied to the time and the MEID of the phone, possibly more than that. My keys wouldn't do any of you any good.
It sucks, but the only way that I know to get them is to use a Verizon phone.
duh ask from carrier. now i followed all the steps including the manual update because auto won't happen. afterwards i autoupdated but it aint working? or am i supposed to buy airtime now?
not getting any help. please someone
i completed all the instructions and i can't dial out. i have a triangle at the top. when i call pageplus they are asking for a esn. what the heck am i supposed to do
What happens when you try to dial out? Have you bought/activated your service yet?
yesh i just activated a service using crap motorola. the prl on the page gave me a triangle on the bar i switched it to an older modified one for sprint. when i dial out i get the message welcome to verizon wireless your mobile number is not active or ....
---------- Post added at 05:13 PM ---------- Previous post was at 05:04 PM ----------
Poryhack said:
What happens when you try to dial out? Have you bought/activated your service yet?
Click to expand...
Click to collapse
i switched back to the prl on his thread. i wonder if he switched the prls from cricket to pageplus on accident? this sucks i been working all day got school soon and no help for my mom. ahh
So, the PRL isn't working for you, eh? The PRL for Page Plus is 51--- something -- Cricket is 42700.
Are you sure that your phone is unlocked? Are you sure you're reading from phone to get current settings before writing PRL, phone number, etc, back to the phone? (it should prompt you for your MSL -- which should now be 000000) Then make sure you fill out the data correctly. You should be able to get your MIN/MDN by asking for them from Page Plus. I openly told the rep on the phone I was trying to flash the phone myself and he gave me all of the information (and then a little bit more -- unfortunately, not the HA/AAA secret). I was actually originally using my Motorola Droid and asked them to try putting ONE OTHER phone on, to test it out (my Epic). Long story short, it did.
Page Plus uses Verizon's towers -- so it's OK if you're getting that. My phone apparently "roams" as well, but I have yet to have any issues. It's just what shows up.
I've heard that Cricket (prior carrier) can be configured to work 100% with the Samsung Epic for the $45 plan. When my month of minutes runs out, I'll try swapping back and seeing what all I can do... I learned a lot while working on this, so I think I have a little more expertise on this. Prior, I had never unlocked my device, so auto-activation never worked with Cricket! Eeek!
Anyway I will of course write something up about that.
terinfire said:
So, the PRL isn't working for you, eh? The PRL for Page Plus is 51--- something
yup its 51529... in short it was shiet
Are you sure that your phone is unlocked? yes
Are you sure you're reading from phone to get current settings before writing PRL, phone number, etc, back to the phone? yup(it should prompt you for your MSL -- which should now be 000000)
Then make sure you fill out the data correctly. You should be able to get your MIN/MDN by asking for them from Page Plus. I openly told the rep on the phone I was trying to flash the phone myself and he gave me all of the information (and then a little bit more -- unfortunately, not the HA/AAA secret). I was actually originally using my Motorola Droid and asked them to try putting ONE OTHER phone on, to test it out (my Epic). Long story short, it did.
Page Plus uses Verizon's towers -- so it's OK if you're getting that. My phone apparently "roams" as well, but I have yet to have any issues. It's just what shows up.
I've heard that Cricket (prior carrier) can be configured to work 100% with the Samsung Epic for the $45 plan. When my month of minutes runs out, I'll try swapping back and seeing what all I can do... I learned a lot while working on this, so I think I have a little more expertise on this. Prior, I had never unlocked my device, so auto-activation never worked with Cricket! Eeek!
Anyway I will of course write something up about that.
Click to expand...
Click to collapse
cool. i will stick to sero truly duly unlim 4g wimax. anyways. roaming is normal? where did you get the prl? i am using an older prl i found online. i was getting the message you might be charged for roaming prior to each call.
I do not get that message for my PRL. If I remember correctly, PRL's are just how your phone knows which tower to connect to. I've heard they vary based on where you live. In any case, since PP offers nationwide coverage, I'm not thinking I'm roaming and no charges have shown on my phone yet.
terinfire said:
I do not get that message for my PRL. If I remember correctly, PRL's are just how your phone knows which tower to connect to. I've heard they vary based on where you live. In any case, since PP offers nationwide coverage, I'm not thinking I'm roaming and no charges have shown on my phone yet.
Click to expand...
Click to collapse
yeah that's what i am guessing. i flashed different prl's and i still get the same message. can you please check to see if the prl wasn't switched or renamed incorrectly or better yet can you give me the source? prl's get updated and i have an older one. too bad my parents already left for new york i hope everything works out well for them
Poryhack said:
What happens when you try to dial out? Have you bought/activated your service yet?
Click to expand...
Click to collapse
yeah its activated. i had your prl when i activated it and i was getting the roaming message per call. there was the roaming signal on the signal bar throughout. i switched the prl and it went away.
can you check the prl out and the source can you pm it?
Newbie question. I have an unactivated sprint epic. I can't seem to get QPST to recognize the phone. The phone shows up as a modem in the device manager but QPST appears to see something connected but doesn't see the phone as modem. I've rebooted and switched USB ports as well. Any ideas on what could be wrong?
Reboot
Keep. Trying its a pain
feihoon said:
Newbie question. I have an unactivated sprint epic. I can't seem to get QPST to recognize the phone. The phone shows up as a modem in the device manager but QPST appears to see something connected but doesn't see the phone as modem. I've rebooted and switched USB ports as well. Any ideas on what could be wrong?
Click to expand...
Click to collapse
Do you have the drivers for the Samsung Epic 4G installed for sure? What OS? May want to potentially try running as an Administrator, just in case (I don't have this issue, but I know some folks at MS have told me their hardware-heavy programs don't work when they aren't in Admin mode).
Make sure to uncheck the box in QPST about diagnostic/etc ports. Just enable all the ports you can in QPST Configuration and you should hopefully see it.
Are you absolutely sure it shows up as a Samsung Modem?
terinfire said:
Do you have the drivers for the Samsung Epic 4G installed for sure? What OS? May want to potentially try running as an Administrator, just in case (I don't have this issue, but I know some folks at MS have told me their hardware-heavy programs don't work when they aren't in Admin mode).
Make sure to uncheck the box in QPST about diagnostic/etc ports. Just enable all the ports you can in QPST Configuration and you should hopefully see it.
Are you absolutely sure it shows up as a Samsung Modem?
Click to expand...
Click to collapse
I am using XP. Under Device Manager -> Modems, it reads "Samsung Mobile Modem #2". I also installed the drivers from the Samsung support site. For ports, QPST reads "COM5-USB/QC Data Modem" in the "Add New Port" window with the box unchecked. In the "Ports" window it reads "No Phone" under the "Phone" column.
Thanks
hey everyone, i think this is only my second post. Heres what im up to
have VM/Assurance Wireless on Kyocera Jax. Have and older HTC Evo i used on Sprint but hasnt been connected to their network for like a year
Im trying to swap out all the info so i can basically use the Evo instead of the Jax
I have cdma worshop, qxdp, etc
Problem is with getting the required info off of the donor phone, the Kyocera Jax. It seems that Virgin disables the usb data connection before shipping. You connect the phone with usb to a computer, and nothing happens. Device Manager doesnt even show a port. So like i said, it seems well known that Virgin disables their cheaper phones usb data connection
Ive tried unlocking the Kyocera by pressing 1111111, then hitting service. It asks for a password, most likely the spc/msl. However, people are saying these phones dont even have an spc/msl to avoid doing what im trying to do.
did write down a code from when i activated the phone, and it might be of use ##847446#
This allowed me to get into programming, but there was no option to allow data to the usb or anything else like that, it just shows me the MDN and MSID
The ##847446# code does not work when you hit 111111 and go to service when it asks for security code
It only works when you are dialing a number like you normally would
Whats the deal?
How can I activate the usb data port? What can i do to get info off the phone in order to switch over to the Evo if CDMA Workshop and Device Manager arent even showing any activity when the phone is connected via usb to the computer????
well i called Virgin trying to get an msl...they said they dont have them, that Kyocera has the msl. Went to the Kyocera site, it said to contact Virgin. Ugh. So nobody wants to give up the msl.
Virgin DOES disable the usb data connection on these phones. How do I enable it???
I cant really do this until i can get the info i need from the donor Kyocera phone...it has a usb connection but they disable it so you cant do **** like this i guess
I just want to use talk and text on my Evo by switchng the info from the Kyocera Virgin gave me with the Evo ,i do NOT care about data or 3g
still working on this one
I am not sure about Virgin but with Boost to get talk and text working you only need meid, mdn, and msid, then make the phone OTA program. As I said I do not know if it will work the same for Virgin as it does Boost but since they are on the same towers anyways I imagine not alot of settings should have to be changed. Hope this helps!
thanks mate! Well i have the mdn and msid...and i think the meid is actually on the battery...so i may just be in business!!! i think today is the day!!!
things arent going that well
the only thing i need for an OTA is the msl from my Evo. I cant connect the phone to CDMA workshop because there is something funky with the HTC DIAG driver install. I have the inf to make it show as htc usb modem but when i try to update the driver in order for CDMA workshop to work it says theres no devices that meet that software need
my other try to get the msl was with a terminal emulator. this process did not work either
im now going to try to root my phone, never rooted, not sure what will happen, and then i can run the msl reader application in the play store
Did you press ##3424# before trying to read evo with cdma ws?
Sent from my PC36100 using xda premium
This is really becoming a nightmare. I cant tell you how many things ive had to download just to be able to root my phone, which is what ive decided to do in order to get my msl...after im rooted i will be able to use the msl reader from the app store.
ive never thought about rooting before, and im wondering if im going to lose all my data, such as contacts, everything. Will I? Im using the htcdev method and it may be easy to some of you but i swear all i do is see more and more links to files or programs i need to have first.
all i want is my msl
Called Sprint 1 to 5 times today trying to get my msl from them...but since the account has been cancelled for like a year due to payment, for some reason are unable to see the msl
They were more than happy to ask for an address to which they could send the bill for 250 bucks though
Klown80 said:
Did you press ##3424# before trying to read evo with cdma ws?
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
i did not! i shall try. probably what stumped me. After that ill keep tinkering. Thanks for being there klown!
im also new to the board so when i hit multiquote i thought that was to quote you in a reply so i think i need to delete like 5 multiquote mishaps
i cant really explain, it all happened so fast....the reason my HTC DIAG drivers were not working is because i didnt try the x86 option. I am now succesfully connected to CDMA workshop. Now to find the msl!!!!!! i should be able to find it with CDMA WOrkshop right?
edit WTF it says 0000 for spc
and there is an option to set it on or off. which do i choose? also an option to write it...just make it all zeros?
and should i still do ota or should i use cdma workshop? or use the virgin thread method?
got the correct spc from CDMA workshop. Now, when I open QPST, it doesnt even show my phone. Typed ##3424# before connecting, then connecting to CDMA workshop first, then opening QPST, but QPST will simply not read/see my phone. Are there specific drivers for QPST?
bonerstorm said:
got the correct spc from CDMA workshop. Now, when I open QPST, it doesnt even show my phone. Typed ##3424# before connecting, then connecting to CDMA workshop first, then opening QPST, but QPST will simply not read/see my phone. Are there specific drivers for QPST?
Click to expand...
Click to collapse
no, just connect it to the port your phone is on.
if you don't know the port, then you can find it through device manager, or you can just try connecting to ports in cdma until you find the right port, and then add the port in qpst
im now on the last step ....using this method
http://forum.xda-developers.com/showthread.php?p=30756751&posted=1#post30756751
if you go to the last page i have a few posts about whats going on. Ive come very far. Sadly this last step with QXDM is simply not working... can verify that the meid is now cleared out...what i cant do is write the new/correct meid
also, the method/thread over there doesnt say anything about that three letter word that starts with an E
bonerstorm said:
im now on the last step ....using this method
http://forum.xda-developers.com/showthread.php?p=30756751&posted=1#post30756751
if you go to the last page i have a few posts about whats going on. Ive come very far. Sadly this last step with QXDM is simply not working... can verify that the meid is now cleared out...what i cant do is write the new/correct meid
also, the method/thread over there doesnt say anything about that three letter word that starts with an E
Click to expand...
Click to collapse
that gets populated automatically when you enter the meid
thanks again for all the help mike and klown and everyone!!!!
oay heres where im at now...currently connected to cdma and have verified MEID and the "E something something" have been changed correctly!!!!!!!!!
now the question is, do i just unplug the phone and try to make a call? Reboot the phone? Save it all to a file and load that at startup or something?
Or is this pretty much it?
I have a feeling the meid and e something something will zero out again as soon as i disconnect from the computer.
Also, i followed all the steps properly...and was never prompted to enter any MDN or MSID data...so that data has not been applied. Does it need to be??
edi wait wait....my DIAG TX for e something something reads all zeroes, while the DIAG RX is correct. The RX and TX are the same for the meid
okay the big moment has arrived...just restarted it waiting to boot...and i found out i needed to # my msl then change the mdn and msid. fingers crossed
errr im getting an error 16
alright i get an error 16 when i call out, i guess is from Sprint? I cant have them reset anything because my account has been inactive for like a year.
i can receive calls oddly...the phone lights up for a second then goes dark....but the phone sure does tell me that i missed a call
just tried texting to the phone, nothing yet. I thought i could use sms but maybe the evo only uses mms???
Not sure if it is the same on VM as it is on Boost, but to fix the error 16, just log in to your acct online and look for an option to update handsets. Simply swap out handsets then swap right back, that is the quickest way to fix error 16 with Boost, maybe it will work with VM?
bonerstorm said:
alright i get an error 16 when i call out, i guess is from Sprint? I cant have them reset anything because my account has been inactive for like a year.
i can receive calls oddly...the phone lights up for a second then goes dark....but the phone sure does tell me that i missed a call
just tried texting to the phone, nothing yet. I thought i could use sms but maybe the evo only uses mms???
Click to expand...
Click to collapse
error 16 isn't a really big deal, it means that you had both phones on at the same time. What you should do is take the battery out of your kyocera and never turn it on again.
I got error 16 as well the first time I flashed, I had the phone turned off but with the battery still in it and got the error.
Error 16 is easy to fix follow this forum post http://forum.xda-developers.com/showthread.php?t=1290906
Inside of that post will be a phone number to call to reach sprints "Error 16 Call Center" they'll ask you some questions about YOUR VIRGIN MOBILE INFORMATION, your account name, what kind of phone you have, yada yada yada. Just give them all your information, but only for your KYOCERA and VIRGIN account, don't mention that you flashed your phone or anything, just give them the info from your account and from your kyocera phone.
They'll get you working within, like, 20 seconds.
It's not like boost where you can fix it on the website.
Thanks for sharing your trial and error on this! I'm getting ready to try the same thing, except on a Samsung Galaxy SIII. I've got the Kyocera JAX that I'm pulling the information from but I would like to use the data functions as well (Assurance offers the Virgin Mobile unlimited everything for $30/mo, absolutely worth the money if it works). I rooted it first thing, then unlocked it and now I'm just trying to make sure I've got all of the info I need before I start making real changes on the Galaxy.
BTW - I've heard that Virgin does offer 4G data and I'd love to be able to access that since I won't be able to take advantage of the LTE capabilities of this really sweet piece of electronic indulgence. Any advice or information is gratefully accepted.
kyocera diag mode
get the msl from virgin. tell them you can reprogram your phone and if you cant your just thinking about changing to another carrier. if your a good customer they will give it up.
on the kyocera type ##3424# then enter your msl(spc) its 6 digits......
from there your phone will show usb/diag on off....
good luck trying to read it with anything. i tries a kona a coast and some other cheap phone and managed to get this far and connected etc but they will not read.
Good luck. if you figure something out let me know