Database Users

Voice speed dial - voice command

Ok guys.....So I have a wing with PDAVIET .14 ROM. I pretty much switched as soon as i got the phone so i havent had much experience with the standard tmo rom but i am having an issue with my Voice speed dial. Basically if i go to the programs and click on the application it works fine..i can attach voice recognition titles to different contacts.
The problem that I am running into is when i assign the button on the wing (one right above the messages button) and push and hold it gives me the error.
"The file 'VoiceCmd' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."
But it does work directly from the .exe file. Whats wrong here? It does say to reinstall if the problem persists so...what is the most recent edition for the wing? or is that even necessary to do that. I tried to run the app from a couple buttons but nothing. In a whole, i'm trying to get my voice command to work through my bluetooth. am I going about this totally wrong?
Comments appreciated!

lokmeup said:
Here is a MS Voice Command 1.6 and BT Patch ONLY ExtROM that I use when building my ROMs. It will install everything the exact way necessary to get announcements and BT to work without any further changes. Just install, Run, Pair your BT, Soft Reset, and have fun.
MSVoiceCommand1.6_and _BTpatch_ExtROM.zip
http://www.sendspace.com/file/3xqdnc
If you only wanted the CABs...
MSVoiceCommand1.6_and _BTpatch_CABs.zip
http://www.sendspace.com/file/bq815x
Ron
Click to expand...
Click to collapse
So I did a bit of searching and I just decided to install voice command from the above thread. I know that it was in the Hermes forum but i assumed it would be all good. Now i have tried both of them and figured out how to get them to work. so now they are both working with the handset, all gravy. I think i am going to keep the speed dialer that came on the rom it seems to be more accurate.. Also how to use my earbud to prompt the command, i cant get that squared away with either applications. Anyone have a suggestion?

How did you get rid of the message? Even though I installed the cab, assigned the button (button 4 hold), it is still giving me annoying VoiceCMD error like yours. Can you do a create a brief procedure? Is it a simple reg edit? Where? Thanks... Hope to hear from you soon.

Can someone post or PM me another link to download MS voice command? the two links above are not working. Thanks

thenyccharles said:
Can someone post or PM me another link to download MS voice command? the two links above are not working. Thanks
Click to expand...
Click to collapse
I don't or can't use Voice Command. Trying to uninstall Voice Command as it does not work for me at all.
Here is a Cab file for Voice Speed Dial. Installed it yesterday on my Wing and it works great. Try it and you may want it instead of Voice Command. I think it does everything better than VC. Let me know your opinion.

Thanks I will give it a try...
asctony said:
I don't or can't use Voice Command. Trying to uninstall Voice Command as it does not work for me at all.
Here is a Cab file for Voice Speed Dial. Installed it yesterday on my Wing and it works great. Try it and you may want it instead of Voice Command. I think it does everything better than VC. Let me know your opinion.
Click to expand...
Click to collapse

Thanks. this version works well.....

asctony said:
I don't or can't use Voice Command. Trying to uninstall Voice Command as it does not work for me at all.
Here is a Cab file for Voice Speed Dial. Installed it yesterday on my Wing and it works great. Try it and you may want it instead of Voice Command. I think it does everything better than VC. Let me know your opinion.
Click to expand...
Click to collapse
Thank for file

Thanks. Works fine on my HTC P4351 (Wing) with ROM JustStable-Micro 6.1

does it work for WM6.5?
i have omnia i900
after i flashed it, i can't use voice speed dial
i read the post later, and he said he removed it

Thay is what I am wondering as well. That is the only thing thay I notice in Glass v.10 as being a bug - when I press and hold the button I get an error saying "the fole voicecmd cannot be found."

The Ultimate Soution for Microsoft Voice Command!!!!!!!! :) :)

Like most of you out there. I was very frustrate with the available version of Microsoft Voice Command because it doesn't seem to work properly on the Diamond. I played around with it for a few days and found a mod that allow it to work, but it doesn't seem to work for other who read my post. So these last few day I been doing hunting only. I happen to find a very new release of Microsoft Voice Command v1.6 Build 1.6.9213 that was design to work with Window mobile 6.1.
Here is the link.
http://www.ipmart-forum.com/showthread.php?t=274611
This version of Voice Command will install properly on your Diamond and save you all the trouble of Modding.
Also, for those of you who criticize me so much, I'm not doing this for money or anything, just try to help the community.
Love more, don't hate
Well, now you can all finally throw away that junk Cyperon Speech Commander and have a good night of sleep.
Also, I check Dutty ROM 1.8. He seem to have version 1.6.9965 which seem to be very new. I been trying to hunt this version down but with no luck. Hopefully Dutty will unlock his ROM someday so I can extract it for everyone.

is this the one currently enabled on Dutty's Rom v1.8?

kemathon said:
Well, well. Isn't it a lucky day for you folks out there. I finally got XDA MSVC_US_PPC 1.6.19209 (this is the latest version of Microsoft Voice Command) to work on HTC touch diamond!!!!
First of all how and where to get it (search engine...hint torrent)
Installation instruction.
1. After you got the Cab file, move it to your phone and run it from there
2. Installation is going to be complete with an error...
3. Press ok and close installation window.
4. use File Explorer to navigate to the Programfile/VoiceCommand
5. Copy the file called "voicecmd.exe" (hint: the one with the icon)
6. Navigate to MyDevice/Window/Startmenu/Program
7. Then tab and hold the sreen and paste as short cut there. Now you would be able to run MSVC 1.6 from the programs menu
8. You can now go to setting, and change the press long call button to use "voicecmd"
9. And voila, there you have it. Perfectly working MSVC
Here are the additional steps to make it work with your bluetooth headset.( also the credit in the bluetooth session belong to tommatt who make the first discovery of the solution)
- set HKLM\Software\Microsoft\Bluetooth\AudioGateWay -> SupportCLI to 1
- set HKLM\Software\OEM\VoiceCommand -> VoiceCmdEnable to 1
- Made a Softreset
Well, now you can all finally throw away that junk Cyperon Speech Commander and have a good night of sleep.
Click to expand...
Click to collapse
What is the exact error message you get under the installation??
I'm planing to modify the cab to work "out of the box" for the Diamond, but I don't have my phone here so I cant test the cab myself.

Duttys
I'm using the one on Duttys ROM and its pretty wicked
I expected it to be a bit naf but its just very good and practical too.

sdc77 said:
I'm using the one on Duttys ROM and its pretty wicked
I expected it to be a bit naf but its just very good and practical too.
Click to expand...
Click to collapse
silly question but what does it do, the voice command that is?

allsorts
It allows you to call any contact by speaking into a headset or at the phone
f ex "call david smith" and it will ask you if you want to call his landline or mobile and you can confirm.
it allows you to launch any program..
f ex "open tomtom navigator" starts tomtom ...
allows you to play music.. list appointments..etc etc and all this with no 'voice training'
This page shows you what can be done with it
http://www.microsoft.com/windowsmobile/en-us/help/more/voice-command-tutorials.mspx

How do I enable a Long press on my handfree cable? Something like Ceb commander, it will activate the program when I had a long press on the handfree set

Hi. I've downloded the voice command application. But i'm having problems assigning a button for it. When i go into <settings, buttons> there arn't any buttons there for me to assign voicecmd to. Where do i get the buttons in the list from?

ehm.... MS Voice Command is working on my Diamond since two month! So, where is the news?

sushilange said:
ehm.... MS Voice Command is working on my Diamond since two month! So, where is the news?
Click to expand...
Click to collapse
Same here.

excuse me~~~
where can i download the cab??

holyfox said:
excuse me~~~
where can i download the cab??
Click to expand...
Click to collapse
39$
http://www.microsoft.com/products/i...7701-4eaf-8435-1cef3ec9f7ff&type=ovr#HowToBuy

electrocat said:
39$
http://www.microsoft.com/products/i...7701-4eaf-8435-1cef3ec9f7ff&type=ovr#HowToBuy
Click to expand...
Click to collapse
I beleive VC 1.6 comes on all WM6.1 ROMs now, if not HTC has been providing them for me in their ROMs. They have always worked well even over Bluetooh except on TI OMAPI devices.
This maybe helpful though for people with WM5 and older.
Jcostanza4

Wow, that is great news!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I've got it working and it works pretty good!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Also, you are a hero with interpunction!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I mean, one exclamation mark wouldn't have done it!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Awesome!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

The Voice Command is assigned to the "Hold" button... which is the "Hold" button anyway?
I have tried to press every button, but nothing happens...

Voice commander didn't work for me. When installation starts i get an error and installation does not create Programfile/VoiceCommand. May be my ROM is the problem?
Thanks
ROM 1.93.405.1WWE HTC Diamond

This is so crap. First I installed ms voice command and of course it wasnt good for me because names are in romanian and it only recognizez english names.
I modified something and now i cant get the original voice dialler to work with my bluetooth

My voice command works just fine with my Jawbone and Diamond CDMA

German Version
Hi.
I have installed the cab without any errors and it works fine. But it will be better for me to have a german version. It´s not so easy to pronounce the german last names in english. It would be nice, if someone could tell me, where to get a german version.
Thanks
madmax07

sushilange said:
ehm.... MS Voice Command is working on my Diamond since two month! So, where is the news?
Click to expand...
Click to collapse
He said this is better. Didn't say the current one doesn't work.

MS Voice Command 1.6

Has anyone tried to install MS Voice Command 1.6, does it work? Any recommendations?

[email protected] said:
Has anyone tried to install MS Voice Command 1.6, does it work? Any recommendations?
Click to expand...
Click to collapse
I have installed it and it works VERY well. I was really surprised that as soon as I installed the CAB file I was able to say "Play..." then any artist or album in my music library - right out of the box. Voice recognition was incredibly accurate with no setup required (I.E. "Play - A Tribe Called Quest" consistently no probs )
HOWEVER I have actually uninstalled it recently as I was watching the task manager and noticing that the 'VoiceCommand.exe' process was consistently jumping between 1% and 12% with no action from me whatsoever. This is not much and might be tolerable for some people but for me it is an added drag!

this program has some bugs
it will delay the sip and it will mess up the ringtone
however you could change the regisitry to fix it
if you don't need it , better dont install it

X807 said:
this program has some bugs
it will delay the sip and it will mess up the ringtone
however you could change the regisitry to fix it
if you don't need it , better dont install it
Click to expand...
Click to collapse
how does one fix this problem?

MrZippo said:
how does one fix this problem?
Click to expand...
Click to collapse
for the ringtone bit i dont know hoe to fix the registry
for sip issue u can check out the wikipedia here. if you are not an advance user defintely not risk to edit your registry

I tried it, but, maybe coincidence, maybe not, I found my battery ran down quite quickly. This happened over 3 days, so i uninstalled it, and it has gone back to normal battery time.
Maybe it is something to do with what SamasQ mentions above. Maybe its just my phone.

Did the incoming calls announcement work as well?
For me it was the only thing that didn't work.
Voice dial, running programs, play music, announcing new messages and calendar events - all worked. But incoming caller names did not.
On my old HTC TyTN II all of the above worked.
So I'm wondering, was it just me or don't the incoming caller announcement work on X1?

Draqula, same here, all worked but incoming call announcements.
try going to some website (win-mo experts or something and look for bengaliath, he did some extensive post on this program. I haven't had time to look yet, but its worth a shot.)
BTW, which ROM you using, (UK international?)

fpbiii said:
Draqula, same here, all worked but incoming call announcements.
try going to some website (win-mo experts or something and look for bengaliath, he did some extensive post on this program. I haven't had time to look yet, but its worth a shot.)
BTW, which ROM you using, (UK international?)
Click to expand...
Click to collapse
R1AA017 R15A GENERIC_UK
I read the bengalih guide. It was originally posted here at xda forums and helped me a lot when setting up VoiceCommand on the HTC TyTN II.
Now it's available here: http://www.winmo-experts.com/viewtopic.php?f=11&t=2&start=0&st=0&sk=t&sd=a
Unfortunately, there was no helpful info for me there.
I found and checked the following registry key...
Incoming Announcements are the function of the voicecmd.exe and the following registry key:
HKEY_CURRENT_USER\ControlPanel\Sounds\TTSAnnounce
"Script" = "as5p"
"Category" = "VoiceCommand1"
"Sound" = "Application Data\Volatile\TTSCallerID.wav"
... and found that on my X1 there was an extra slash in the location of the wav, but fixing it didn't help.
Let me know if you find any new info.

I have successfully ported quite a bit of drivers from x1 and blackstone to raphael.. please try the blackstone wavedev.dll (it must be cooked into rom) - on raphael this updated driver fixes voice command announce problem

Voice Command 1.6 also disconnects the bluetooth headset after you give a voice command. You have to re-establish the bluetooth connection again each time.
I've already removed the Voice Command because of this.
Other than this problem, it works very well in the X1.

The small print below the sales pitch for voice commander states "Incoming caller ID announcements will be spoken via the phone speaker on Sony Ericsson Xperia X1s with a Windows Mobile build prior to 15097.3.0.0. "
Any ideas how to find the build number?

windows mobile build
esco666 said:
The small print below the sales pitch for voice commander states "Incoming caller ID announcements will be spoken via the phone speaker on Sony Ericsson Xperia X1s with a Windows Mobile build prior to 15097.3.0.0. "
Any ideas how to find the build number?
Click to expand...
Click to collapse
For windows mobile build Go to settings/system/system info.
I/ve tried in all combination, but coice command don't work with the callar id function. I purcased it, but now refund, don't work!

voice command 1.6 works fine on my X1 too except call announcement. I have tried all the recommended patches, but when I replace the files nothing happens or i get some crashes.
Has anyone tried this allready with success?
many thanks
Boris

I have read all these posts and see that most poeple have a problem with the voice caller ID being read out....
I too installed (though a previous version) v1.5 and everything works fine except for caller ID voice read out...
Another thing i found is that it would read email subject headings from my 2nd email account but not from my first email account....might just be coincidence...
Bit concerned now that I read about the 1%-12% fluctuations when you arent even using it....hmmm

Same problem, no caller ID name readout
Same problem, the callerID is not read out.
What version are you guys running of MS Voice Command? There are multiple versions of 1.6.xxxxxx.

I am trying to use it with my BT headset. That is speaking the name into my bt headset after pressing the button on it. Does that work or do I always have to use my phone for speaking my commands?
EDIT: never mind. I got it to work. By restarting the phone (so typical of Windows)

When i installed Voice Command on my Xperia... it errored out at the end of installation, but completed regardless. It is working perfectly in every aspect except announcing incoming calls. It is great when it announces messaes and e-mails so that i know whats coming in and from who...
It did announce an incoming call once or twice... but out of the blue.

msalmank said:
It did announce an incoming call once or twice... but out of the blue.
Click to expand...
Click to collapse
Interesting. For me too, that's the only problem. Incoming announcements.
Somebody mentioned it disconnects BT HF and you have to reconnect manually - not true for my Jabra BT8040, it stays connected or automatically reconnects, anyway it works.
Especially useful when driving and getting new messages and next appointments announced by BT HF.

just a question that links indirectly to this thread:
is there a way to remap the button for voice command? somehow I wanted to invoke the voice command app via the earphones' button SE X1 has. so I don't have to grab my phone inside its pouch and unlock it and press either the 2 buttons I mapped em with.

MS Voice Command for WM 6.5

What is the latest version of MS Voice Command that works properly on WM 6.5 ? I can't get it to announce caller IDs?

Yes, I also have the same question. Any answers?
Cheers.

Latest version is Voice Command 1.6

Using 1.6.21040 working flawlessly on WM 6.5

YOSEFE said:
Yes, I also have the same question. Any answers?
Cheers.
Click to expand...
Click to collapse
inlcuding caller ID announce?

I have used the same MSVC cab on several 6.5 and 6.5.1 ROMs (1.6.21040). In all cases it works, however, in some it will announce calls over bluetooth and in others only on the speaker or wired headphones. The CAB is available on several threads in the ROM Dev forum.
Russ

Go into settings > Personal > Voice Command > Phone > Announce Incoming calls

leebd915 said:
Go into settings > Personal > Voice Command > Phone > Announce Incoming calls
Click to expand...
Click to collapse
I have that same version installed and I have the settings right (of course), but ever since I installed the latest EnergyROM 21869 the ID announce seemed to stop.

Hello
I tried to install Voice Command 1.6 on my Touch HD2 Leo. I had no issue during the installation but I don't know how it works. I'm not able to find any icons to launch the software or change parameters. The only thing I found is in button allocation where I can ask to use a button with VC.
COuld you help me in order to make it works on WM6.5 ?
Thanks for your help
Edit :
In fact after a software reset, I'm able to access to Voice Command but I'm not able to assign the "voice command" actions to a button on my HD2. I try to put the command on the phone key (left key) by putting long action but it does not works.
If you have any idea....

ludovic.audoin said:
Hello
I
Edit :
In fact after a software reset, I'm able to access to Voice Command but I'm not able to assign the "voice command" actions to a button on my HD2. I try to put the command on the phone key (left key) by putting long action but it does not works.
If you have any idea....
Click to expand...
Click to collapse
Try this, this works on my TP2 and on my TD2.
Go to the folder:
windows
startmenü
programs
delete the link voice command or VC or how they is called.
create a new link to the voice command.exe
got to your button settings and choose your new link.

Is MS Voice Command 1.60 compatible with HD2 running WM 6.5.5?

I bought Microsoft Voice Command 1.60 and I tried to install it on a HTC HD2 mobile that runs Windows Mobile 6.5.5 (cooked ROM), but I always get an error message at the end of the installation, which says:
An unrecoverable error occurred in Setup. Please reset the device and try again
On the Handandgo website is listed that HTC HD2 and Ms Voice Command 1.60 are compatible, and the technical support of Handandgo confirmed it me that once once more.
I have tried:
- at least 3 different ROMs, (Freyberry barebone, Miri, 3l5y)
- at least 2 Stock ROM (1.43 and 1.66)
The error occurs even if I install from the PC using Windows Mobile Device Center or when I install from a downloaded cab files, located on my phone SD card.
Please can anyone suggest a solution?
Thanks

It might be that this latest and previous editions of MS Voice Command are NOT compatible with HD2
Can anyone confirm?
Thanks
Saulo

Or does it need to have NetworkFrame 3.5?
If so, how do I know if I am running standard 2.0 version or latest 3.5 version?
Thanks again
Saulo

1) Have you checked that it works, i had this broblem after install on my old TD and it still worked. If i remember correctly it did not assign it to button 1 correctly either and you had to put a shortcut into the start menu then assign it to button 1.
2) I have not been able to get any version of MSVC to work on my Leo with 6.5.x, I am using Cyberon now... it is a bit of a pain having to go through all the contacts teaching it, but it works well.

Better use Cyberon Voice Command. Its
compatible,
more comfortable to use (no voice assignment necessary),
attachable to longpresssendkey even with bluetooth-headset easily (if this option is enabled, otherwise search for S64 enable send key)
and has more functions than MVC
Greets

Thanks a lot elburna
I will surely give a try to that application you mention
Now my problem is how to unistall...in fact also unistall runs in the same error message...
I dislike to have my system dirty with aborted installations and aborted removals. can you advice it?
Thank you!
Saulo

Dear elburna
Where can I download a trial or buy the latest version of cyberon voice command?
No sign of it on handango.com and pocketgear.com
On the official site
http://www.cyberon.com.tw/download.php
I just see corporate solutions...
Thank you
Saulo

Do a search for Duttys Cyberon Voice Speed Dial it is oem.... free

saulo866 said:
Dear elburna
Where can I download a trial or buy the latest version of cyberon voice command?
No sign of it on handango.com and pocketgear.com
On the official site
http://www.cyberon.com.tw/download.php
I just see corporate solutions...
Thank you
Saulo
Click to expand...
Click to collapse
This site is just right. Download the trial here
http://www.cyberon.com.tw/download.php
and if you like it you just need to use the register button on their page

dear Elburna
I have tried Cyberon and works very good (altough my english pronunciation is not good and many contacts are mistaken)
I have purchased via paypal 1 hour ago, to support them, $20...up to now I have NOT received any serial. Did you also wait a long time before receiving unlocking code?
2.
Is it possible to install another language? Say Italian? Or French?
3.
Is it possible to install Chinese Language (I am learning it)
Thanks
Saulo

saulo866 said:
dear Elburna
I have tried Cyberon and works very good (altough my english pronunciation is not good and many contacts are mistaken)
I have purchased via paypal 1 hour ago, to support them, $20...up to now I have NOT received any serial. Did you also wait a long time before receiving unlocking code?
2.
Is it possible to install another language? Say Italian? Or French?
3.
Is it possible to install Chinese Language (I am learning it)
Thanks
Saulo
Click to expand...
Click to collapse
Im not quiet sure but i think (didnt test it yet) you can install any of the trials from their website (french, italian, and so on, unfortunately no chinese only japanese ) and unlock them with your code. If you dont like it you can go back to your old version any time.
For me it took a whole day till the registration code was sent because i ordered in the afternoon hours as well (takes some time till they check their paypal-/email-account), so dont worry

I am trying Cyberon Voice Command. Sound and voice work through the bluetooth headset but I cannot get the Bluetooth Headset to start the command.
I have also tried Microsoft VC, this works ok except i do not get the tone at the beggining or the failed tone.
Anybody experianced and of these problems and any sollutions.

What the hell? I've been using MSVC on mine for ages now, even over bluetooth.
On older ROM's it didn't, but since the latest T-Mobile build's it's been fine.
I'm using Miri Rom 7.0 on 6.5.5. I've assigned the longpress send key to activate and it works without issue. Furthermore, it installs then says some sort of error occurred, but I just press okay, and the back key and it works great!!

HI Guys,
because I am total noob in MSVC, could you please answer a few questions for me? I seem to have it embedded in my Xanny 1.4 Evolution (6.5.5) rom, but I haven't got any idea how to set it up or use it...
So firstly:
Does it work like I for example say: "Call Edward" or something and it will do it? Where do I set that up? Where do I record and apply the command?
Secondly:
Does it work only on bluetooth headset, or a wired headset (or no headset at all ) can be also used?
And lastly:
Does it need to be switched on/off whenever I want to use it or is it just another ongoing service?
Thanks!

MSVC on XannyTech Evo 1.4
morningstar.fallen said:
HI Guys,
because I am total noob in MSVC, could you please answer a few questions for me? I seem to have it embedded in my Xanny 1.4 Evolution (6.5.5) rom, but I haven't got any idea how to set it up or use it...
So firstly:
Does it work like I for example say: "Call Edward" or something and it will do it? Where do I set that up? Where do I record and apply the command?
Secondly:
Does it work only on bluetooth headset, or a wired headset (or no headset at all ) can be also used?
And lastly:
Does it need to be switched on/off whenever I want to use it or is it just another ongoing service?
Thanks!
Click to expand...
Click to collapse
I've been using the same ROM and my BT headset is Jabra Extreme. It works well.
Go to [Settings][Other][Voice Command] to set the MSVC to your liking. Actually, you don't need to as the presets are working well. Only you can check whether it is enable or not.
Click on your BT headset button and say the command after the beep. Better still after the beep say "Help" and you will be guided on the capabilities.
Don't know about wired headsets because I only use it on bluetooth headset.
You must activate the bluetooth services and pair your headset first. I usually leave the bluetooth services on or you can d/l the BT toggle to save battery. Frankly speaking, I leave the BT services on and the battery saving is minimal.
Hope that helps.

Ok, so it only works through headset then. Possibly only trhrough BT one... So I can't just talk to my phone without using any headset...? I guess I can (but I'd probably end up locked in mental institute...).

Voice Command with HTC HD2
Hi Guys been followingthis thread i have installed Voice command it seems to be working with regards to telling it to call my contacts however it does not read my emails to me as it used to do on my Imate Ultimate 9502 i have double checked all the settings etc they are set as per the imate but i cannot get it to read new messages any ideas?

I always got the install error when installing MSVC.. but i just ignored it and it works anyway..

does it read new messages?
I get the same error when installing and ignore them but it refuses to read new text messages

well for those intereseted after testing and many different solutions
the vedic is that the HTSense sms message system is not registering with voice command.
command voice dial and programm access works
appointment reminders work and new incoming emails are anounced and read aloud.
the only thing that still does not work is new incoming sms's are not read aloud.