Hi all, I've followed the instruction of rooting the Hero and everything looks fine. When I try to run the wireless tether for root user and I am unable to get it working.
kernel - 2.6
build number - 1.56
software - 1.56
firmware - 1.5
If I installed version Wireless Tether 1.6, it starts fine but my labtop only see ad hoc, not wifi router. Any other version will give me an error stating unable to start WTFR, please try again. Any idea why this is happenning? How do I know if my phone is rooted properly? TIA.
Related
Hi. The Wi-fi on my G1 has stopped working.
I rooted my phone with the RC9 uk version by JF. I had no problems connecting to encrypted network.
I tried moving apps onto sd card and ran into problems so I wiped my phone and reset everything.
I cannot connect anymore on open or encrypted network. I can view it and when I try and connect it, it try's to obtain ip address and then fails!!?
Any ideas? Thanks
Hi
Does anyone think it's worth flashing back to the original version? I suspect not because it worked ok on the jf version I have but don't know what else to try?
I will try another wireless network at work today.
If my phone is picking up the network but not connect sound like a hardware problem or just a software one do you think?
Thanks
I had a similar problem but it was a router issue. I would def try another router before blaming the phone.
Ok. I just tried another router at work with an open network and its still the same. Shall I flash the phone do you think. Don't really want to do it again but I use the wifi network a lot and I am worried it could be hardware.
Thanks
well if you flash it and still have the problem then its hardware based. So nothing can hurt from flashing
I re flashed with latest version rc9 jf version and now working again. Thank you neoob
Hi, i just got HD2 and never used before. So im not quite familier with this but i dug enough information and flashed my device with NAND Nexusone ROM. My HSPL are2.08, magldr 1.3 and radio is 2.15. Everything is working great except that i cant turn on data connection. The wifi works good to and i can access internet with wifi only. I put the correct apn but i can not have data connection over celluler network. Should i change radio version ? or simply the android rom ? if i change radio version, do i hav to install the android rom again ?Please help me
Hi,
I purchased a used S4 recently, when I first unboxed the phone it connected to my home network just fine and WiFi was working great. After running the OTA update (I know it was dumb, but I my mind was numbed by the shiny new phone), I could no longer connect to my home network, and could only see a few of the nearly 20 networks I could see before the update.
After a lot of experimenting, I finally figured out that I simply could not see any 2.4 GHz networks on my phone! I can connect fine to 5 GHz networks and they work well, but I can't even see the 2.4 GHz networks. Any ideas on how I can fix this? I've tried searching the XDA forums and Googling the issue without much luck. Here's the closest thing I've found.
I'm a software engineer with some background in hardware, so I don't have any problems doing any kind of software or possibly even hardware mods to get it working. For completeness, I've detailed all the steps I've taken so far:
0. (First unboxed the phone, WiFi worked normally I was happily connected to my network)
1. Ran OTA update
2. WiFi quit working (displayed above symptoms)
3. Rooted phone (towelroot) and installed safestrap (3.7.2) following the last section of this post. - Issue persisted
4. Installed SHOstock ROM - Issue persisted
5. Followed entire Odin/stock re-flash using the same link above - When the phone first turned on after the NB1 install, it picked up my network. I thought this was an indication that it was going to work so I continued following the guide
6. Updated to NC1 - issue returned
7. Used Odin to restore phone to NB1 again - same issue
8. Realized only 5 GHz networks show up
9. Ran through complete re-install and am currently rooted with safestrap running LightRom v13 with the NC1 modules installed
10. Installed this WiFi band switcher. Whenever I switch to 5 GHz or auto I can see and connect to 5 GHz networks. When I switch to 2.4 GHz nothing shows up and when I hit scan it acts like it's not doing anything.
Hi guys,
I've got a Samsung Galaxy S4 with this custom rom.
Unfortunately, the wifi connection drops or doesn't even work at all. I downloaded another custom rom, Cyanogenmod 11. For me, this rom also has the same wifi issues. So I followed this tutorial here on XDA to update my modem and bootloader to XXUHOF2. (I also flashed the wifi fix for that bootloader in pda/ap).
The modem and bootloader update worked, according to these screenshots: (See attachments)
But the wifi connection still drops or doesn't even work at all.
Also, the mobile connection and wifi indicator have sometimes got an exclamation mark next to them. (See attachments)
When I go back to stock, the wifi works perfectly. (But I don't want stock because I hate touchwiz).
By the way the mobile data, texting and calling also works fine.
What do I need to do to get the wifi working?
Thanks in advance,
Twitmuck.
so im running the latest stock rooted (ive tried the u firmware also) my wifi hotspot and usb tether cuts on and allows other devices to connect but does no push internet ive tried recovery reset and double flashing nothing seems to allow the internet to be pushed any help would be great
Update Wi-Fi hotspot router for root user says wan interface not found