Hi,
Cannot remember, searched how but cannot find it.
When I launch the phone and compose a phone number, the keypad is sounding loud.
How to remove these sounds?
I'm using a Valkyrie 6.4 ROM.
Thanks!
Different rom
settings,menu,all settings,personalize,phone,keypad&touch it, has long tones,short tones, & off.....
That's what I thought, but don't have this menu
Going to ask directly to the cooker, think it's going to be easier
Thanks for your answer
+1 got it on mine thanks slot
Related
Hi, I have a problem with my phone sometimes. When i'm on the phone or the phone rings and i go to take it out of my pocket or its case, the ignore softkey is UBER fricken sensitive and sends the caller to my voicemail. Is there is a way to basically disable the softkeys when the phone is in use or when the phone is ringing? I use the softkeys for other programs but this is really frustrating. Thanks.
bump anyone?
i find it hard to believe that NO ONE has an answer to this...i assumed this would be something easy to remedy... :roll:
Hi Guys
Another basic question here. I can see how I can set the phone to ring, how to set it to vibrate, and how to make it be totally silent. My question is, can you make the phone ring AND vibrate for an incoming call? When I select ring in the control panel, it makes the vibrate option vanish. Please tell me this is possible!
Regards,
Andrew
In Settings/Personal/Sounds & Notifications you hit the notifications tab at the bottom.
Under 'Event', choose "Phone: Incoming call"
Under 'Type', choose "Vibrate and ring" or "Vibrate then ring"
You can also do all this in Settings/Personal/Phone.. first tab..
I reccomend exploring your phone before asking something like this. I'm not trying to be mean or anything, but you could have found this extreamly easily just by looking at all the options you can choose from in the settings window/list.
Thank you very much v1rone. Don't worry, no offense taken.
I have been looking for this feature for a while now and didn't post as a first resort. This phone is just so different from my last one (SE P990) that it's taking me a while to get to grips with it. I had seen that screen before, but for some reason, I didn't notice that middle drop down and saw vibrate as a tick box for all the other things in the top drop down so I assumed it wasn't possible for phone calls.
Anyway, it's all sorted now, thank you very much for your guidance.
BTW, when clicking on the "notifications" tab at the bottom, it takes ages for the tab to come up. This has only been since I upgraded to the new R2 firmware. On the older R1 firmware, it still took a while, but not nearly as long as it does now. Just thought I'd mention it.
Yeah, mine does the same thing when trying to get into that tab. Not sure what the deal is there.
I haven't flashed any of the new R2 roms yet. It's possible that the R2 versions have more files in the windows folder, causing this application to take longer when seeking out all the settings it needs to display it's window. Not sure..
I have absolutely zero evidence to backup this statement seeing that I haven't peeked into the updated rom files yet, but who knows
Sounds plausible
on another note, any way to make the X1i ring and vibrate in a sane manner . . . the vibration is sort of insane lol
anyone know of any app/program to control this?
thanks
mobilemodman said:
on another note, any way to make the X1i ring and vibrate in a sane manner . . . the vibration is sort of insane lol
anyone know of any app/program to control this?
Click to expand...
Click to collapse
Try VAlert, cab should be somewhere on these forums.
Hi
I have the new ROM from HTC which has the new feature for the phone "Slide 2 Answer\Reject".
While this is kinda cool, its really annoying me because everytime I get a call and phone is in my trouser pocket, while pulling phone out the screen drags against inside of pocket and rejects the call!! Seriously, I have rejected loads of calls since this feature
I prefer no silly answer like "dont put in pocket", "turn phone around" etc
Did install S2u2 but delay in response so uninstalled. I just want to go back to the original but far to thick to know how.
Any help?
Cheers
Go S2U2 settings and remove this function by selecting "off" inthere..
Well as the topic says..
How to remove the dialpad sound when typing a phonenumber? Such an annoying sound!
Yeah, I'd like to know that too!
I thought that i still had this issue but when I just checked (all my phone calls recently have been to contacts so I have not needed to use the keypad on the phone app) I don't have keypad sounds. I can only find options for screen taps which will switch on or off a click but I can't find anything to do with the tone whch I used to have with the dial pad. I can't remeber hearing the tones since I installed SIM Contacts radio update. Not that I'm saying this is related. Sorry for the ramblings, I can't help
Ah, I think that I must have gone to Settings, clicked Menu the All Settings, Personal then Phone and slected Off in the Keypad section. There is also the option there to change between long and short tones.
settings/personal/phone then select keypad off
doh! didnt see the post above mine lol.
Oh my god, this was driving me crazy last night.
I knew I'd set it before but had done a hard reset and coudn't for the life of me remember where I'd seen it.
WinMo has a habit of hiding settings you know you've seen before.
Im running MattC Leo Sense which uses a slide/lock for both the phone lock and to answer phone calls. I was able to change the phone lock slider from up/down to left/right but I want to do the same with answering phone calls.
What happens with incomming calls is someone calls me and I pull my phone straight up and out of my pocket. When I do this, the phone rejects the call because the phone rubs against my inside pocket and slids the answer/slide to reject phone call. If I could change the answer/slide from up/down to left/right then this wouldnt happen.
Does anyone have this issue and/or know of a fix?
Thanks
saabguy123 said:
Im running MattC Leo Sense which uses a slide/lock for both the phone lock and to answer phone calls. I was able to change the phone lock slider from up/down to left/right but I want to do the same with answering phone calls.
What happens with incomming calls is someone calls me and I pull my phone straight up and out of my pocket. When I do this, the phone rejects the call because the phone rubs against my inside pocket and slids the answer/slide to reject phone call. If I could change the answer/slide from up/down to left/right then this wouldnt happen.
Does anyone have this issue and/or know of a fix?
Thanks
Click to expand...
Click to collapse
you can just set a screen lock on it and it doesnt show up until u unlock the screen lol.. thats wat i have or else it answers or ignores people in my pocket.. so with the connect the dot screen lock it just rings and shows u who it is until u unlock the screen...
Can you please tell me how you changed the unlocker from up/down to left/right. I would really appreciate.
Sent from my HD2
same problem here, i've tryed the lockscreen tactic. but i find that very annoying. I have no program skills but there must be some guy who can make a small apk that deletes the slider and replaces it with nothing =) so i can just use the hard buttons on my HD2...
Just to bring the issue up again im still having massive problems with calls being ignored or answered (depends on which way the phone is in my pocket)
Anyway have any idea, ive tried widget locker but that only seems to apply to lock screen and not phone call screen.
This issue had anoyed me for a while as well. I have tried widget locker and that works great for the phone lock, but as mentioned earlier in this thread - not for the incoming call locker.
If someone fixes this for the sense based ROMs, they will be my hero!
cyanogen mod ROM includes the "slide to answer" from lockscreen window similar to "widget locker" app. i just wish they would include the option to add widgets and shortcuts to the lockscreen like widgetlocker does
saabguy123 said:
Im running MattC Leo Sense which uses a slide/lock for both the phone lock and to answer phone calls. I was able to change the phone lock slider from up/down to left/right but I want to do the same with answering phone calls.
What happens with incomming calls is someone calls me and I pull my phone straight up and out of my pocket. When I do this, the phone rejects the call because the phone rubs against my inside pocket and slids the answer/slide to reject phone call. If I could change the answer/slide from up/down to left/right then this wouldnt happen.
Does anyone have this issue and/or know of a fix?
Thanks
Click to expand...
Click to collapse
I have the exact same problem, and looking for a fix.
same problem here
people hung up on me because phone answered in my pocket and they would hear noise while I'm removing it from my pocket/case >.>
setting a lock screen is so annoying, now I remove my phone carefully so I don't answer by mistake.
[edit] I've searched around the net, and downloaded a few new lock screens. there's one called "simply lock screen" it has an option to disable the slide to answer, and it will be replaced by the normal answer buttons you get when the device is not sleeping. it might work, but there's still chance that the answer/dismiss buttons will be pressed when you remove the device from the pocket
same problem here... no one has a clue yet?
the problem is htc sense...to avoid this problem i have switched to stock android builds...
There are a couple of apps out there that can help, the best I have found is Easy Answer Button. It is a bit tempermental, but if you install it as your last app after a fresh flash, it tends to work better - at least imho.
Others are Advanced Telephone (also free) and EZAnswer which will cost you a couple of bucks. (The link is to the 2 day trial).
+1 looking for left-right slide answer-reeject call, END call...
danielson84 said:
+1 looking for left-right slide answer-reeject call, END call...
Click to expand...
Click to collapse
Why don't you just delete htclockscreen.apk from system/app.
It will change sense up and down answer to left, right standard android lockscreen.
Use root explorer or the like and reboot afterwards to see changes.
Sent from my HTC HD2 using Tapatalk