Is it save to cook a TMOUS 2.13 stock rom for a HD2 WWE??? I would like to use the 2.13 as base... are there things i have to look out for? Here r some tips i got from some helpful people..
millski said:
There's no connectiondb oem or connectionsetup/connectionsetup_wvga packages ext in the 2.13 stock rom, you'll probably want to get those from somewhere else (so that connections are correctly set for other networks on first boot). Also the TMOUS 2.13 operatorpkg is full of TMO theme stuff (boot screen, WM 6.5 tsk, TMO app icons etc). I replaced my operatorpkg with an HTC stock pkg...
Click to expand...
Click to collapse
see attachment.... Load Connectionsetup to EXT and Connectionsetup to OEM... I also copied the lines u find in the app.reg file, paste it in initflashfiles.dat... for sure. i believe that connection setup will be loaded on startup this way, correct me if i'm wrong...
NIKOSXRI said:
.......All externals work fine, but if the touch feeling is not good for you, then just replace the touch.dll and touchgl.dll from stock rom.Then touch is much better and soft.
Click to expand...
Click to collapse
got these attached too..
Look into \OperatorPkg\mxipupdate_oemoperato rs_102.provxml
this provxml sets all 9 quicklinks that comes with TMoUS. You might edit them to set your personal quicklinks right after flash... Thanks tidus18
Thanks for these tips... Tested and working tips r always welcome ofcourse
it is save! nothing to look for
Edited to clarify things...
Solved
Thanx!!.........
There's no connectiondb oem or connectionsetup/connectionsetup_wvga packages ext in the 2.13 stock rom, you'll probably want to get those from somewhere else (so that connections are correctly set for other networks on first boot). Also the TMOUS 2.13 operatorpkg is full of TMO theme stuff (boot screen, WM 6.5 tsk, TMO app icons etc). I replaced my operatorpkg with an HTC stock pkg...
millski said:
There's no connectiondb oem or connectionsetup/connectionsetup_wvga packages ext in the 2.13 stock rom, you'll probably want to get those from somewhere else (so that connections are correctly set for other networks on first boot). Also the TMOUS 2.13 operatorpkg is full of TMO theme stuff (boot screen, WM 6.5 tsk, TMO app icons etc). I replaced my operatorpkg with an HTC stock pkg...
Click to expand...
Click to collapse
Yeah found out after flashing my own rom.... working on it now!
millski said:
There's no connectiondb oem or connectionsetup/connectionsetup_wvga packages ext in the 2.13 stock rom, you'll probably want to get those from somewhere else (so that connections are correctly set for other networks on first boot). Also the TMOUS 2.13 operatorpkg is full of TMO theme stuff (boot screen, WM 6.5 tsk, TMO app icons etc). I replaced my operatorpkg with an HTC stock pkg...
Click to expand...
Click to collapse
You should take the one from stock rom and also you must do changes in the operator package oem, of course, if you dont live in the USA.
You may also have to replace the tmous phcanoverbmp dll in this oem package.I dont know if this dll works because i use my custom dll.
All externals work fine, but if the touch feeling is not good for you, then just replace the touch.dll and touchgl.dll from stock rom.Then touch is much better and soft.
NIKOSXRI said:
You should take the one from stock rom and also you must do changes in the operator package oem, of course, if you dont live in the USA.
You may also have to replace the tmous phcanoverbmp dll in this oem package.I dont know if this dll works because i use my custom dll.
All externals work fine, but if the touch feeling is not good for you, then just replace the touch.dll and touchgl.dll from stock rom.Then touch is much better and soft.
Click to expand...
Click to collapse
Ahaaa... I thought so that the touch was different... It was freakin me out!! I had better on other ROM's indeed. Thanx for the great tip man...
+ Que PPC... Changed the title of this thread... hope u don't mind...
No prob for me... but you need to change it again man... why? cause you are talking of some other things now... keep it up
NIKOSXRI said:
You should take the one from stock rom and also you must do changes in the operator package oem, of course, if you dont live in the USA.
You may also have to replace the tmous phcanoverbmp dll in this oem package.I dont know if this dll works because i use my custom dll.
All externals work fine, but if the touch feeling is not good for you, then just replace the touch.dll and touchgl.dll from stock rom.Then touch is much better and soft.
Click to expand...
Click to collapse
Very good tip indeed...i feel the touch in this rom is not as good as the stock rom. i was thinking of using some older based as i thought i screwed up something in this base.
Thanks NIKOSXRI!
P/s: As +Que PPC said, i propose to change topic to tip/things to look out for when cooking with Base 2.13.
Hopefully this title means a general topic jiji
Mod edited to change the title.... again
tidus18 said:
Very good tip indeed...i feel the touch in this rom is not as good as the stock rom. i was thinking of using some older based as i thought i screwed up something in this base.
Thanks NIKOSXRI!
P/s: As +Que PPC said, i propose to change topic to tip/things to look out for when cooking with Base 2.13.
Click to expand...
Click to collapse
Also i noticed that touch response (I mean the software), if you use it, though is very helpfull and i like it, changes the responsiveness (sometimes you tap a button with no response) because it uses its own driver.
If anyone uses it i want to hear his comments on this.
any one knows where to find the reg file to modify those tmous quicklinks... found they where in HKLM\Software\HTC\Manila\Home, but in which EXT pack (app.reg) lies these reg keys???? tried to look in OperatorPkg, but no go...
kurniawan77 said:
any one knows where to find the reg file to modify those tmous quicklinks... found they where in HKLM\Software\HTC\Manila\Home, but in which EXT pack (app.reg) lies these reg keys???? tried to look in OperatorPkg, but no go...
Click to expand...
Click to collapse
Hope this is what you mean:
EVK\OEM\LEO\0409\OperatorPkg\mxipupdate_oemoperators_102.provxml
Click to expand...
Click to collapse
this provxml sets all 9 quicklinks
Related
I am going to give chef'in a try and as I have never done it before I would ask you to be patient with me.
I have the HTC Leo with Radio 2.10.50 and HSPL installed.
Im using oskitchen and so far I have updated a Stock rom to 6.5.5. Nothing difficult there I hear you say ! But hey, its my first working ROM.
Now I have 2 questions that I hope you can help me with.
Q1. When I flashed the ROM to my phone all worked as you would expect apart from the main screen looked like it had dropped down about 10 pixels. Top and bottom bars looked OK but the middle looked wrong (Screen coming if needed)
Q2. Can someone instruct me on how to set the default wallpaper from oskitchen ?
I have an image called HTC_BG.png and I would like to cook it into the ROM as the default wallpaper.
Ive looked on the forums for help with these questions but I am unable to find them.
Any help / links would be helpfull
Once I have this info, I will proceed to cook my ROM and eventually post the results on the forums along with a complete tutorial as I go along, for those who are looking for similar info.
I have any problems with the buttons and the prefrence folders.
I have create a clip how can you see this problem.
h**p://youtube.com/watch?v=qmDQOzCIWu8
I hope i exist a fix, or what are the right kitchen for the Leo??
BoTTeR1337 said:
I have any problems with the buttons and the prefrence folders.
I have create a clip how can you see this problem.
h**p://youtube.com/watch?v=qmDQOzCIWu8
I hope i exist a fix, or what are the right kitchen for the Leo??
Click to expand...
Click to collapse
From what I know dumping and rebuilding a Leo ROM works correctly on both oskitchen 1.30v3 and 1.31beta3 so you probably changed something that broke that stuff. Always try if a clean dumped ROM rebuilds fine before doing changes that may break it.
Okay... I think im not so Stupid to do this.
I go this way:
1. I Install (extract) OS Kitchen on a folder into my Harddrive (C:/OS)
2. Then i Load the original Rom, extract this to get the RUU_Signed_0407.nbh
3.I Start OSKitchen and klick on Import-> Import a new ROM file.
4. I Select my Model, HTC Leo (HD2) and type the pfad of the RUU_Signed_0407.nbh and go to next (Waiting a minute)
5. I klick on start bulding, and os kitchen go throte without errors..
I Flash the Rom...
And the Taps didn't work. I Have a Windows XP OS and the OS Kitchen Version is 1.31.alpha4
BoTTeR1337 said:
Okay... I think im not so Stupid to do this.
I go this way:
1. I Install (extract) OS Kitchen on a folder into my Harddrive (C:/OS)
2. Then i Load the original Rom, extract this to get the RUU_Signed_0407.nbh
3.I Start OSKitchen and klick on Import-> Import a new ROM file.
4. I Select my Model, HTC Leo (HD2) and type the pfad of the RUU_Signed_0407.nbh and go to next (Waiting a minute)
5. I klick on start bulding, and os kitchen go throte without errors..
I Flash the Rom...
And the Taps didn't work. I Have a Windows XP OS and the OS Kitchen Version is 1.31.alpha4
Click to expand...
Click to collapse
Update to 1.31beta3 because anything before the beta1 had issues with HD2
like Shaddex I am looking into creating ROM's from scratch (for HD2 Leo also!), first for personally use and maybe for general if I can get a ROM to look nice.
My question is, is there a kitchen which work's best for the HD2? Or are all basically generic and just "cook" in different ways?
Sorry to hijack your post Shaddex I hope you get an answer soon, wish I could help
And back on topic
Ok. I extracted Oskitch again, added "RUU_Leo_HKCSL_WWE_1.72.831.1_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship"
as the base ROM.
Next installed the "24619_MSXIPKernel_SYS_QVGA_WQVGA_HVGA_VGA_WVGA_0409" so I can use the latest build.
Thats all I did.
No extra EXT packages, Just cooked the ROM and below is what I get.
Anyone shed any light ?
5haddex said:
And back on topic
Ok. I extracted Oskitch again, added "RUU_Leo_HKCSL_WWE_1.72.831.1_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship"
as the base ROM.
Next installed the "24619_MSXIPKernel_SYS_QVGA_WQVGA_HVGA_VGA_WVGA_0409" so I can use the latest build.
Thats all I did.
No extra EXT packages, Just cooked the ROM and below is what I get.
Anyone shed any light ?
Click to expand...
Click to collapse
The 6.5.3 windows mobile builds have the top and bottom bar of different sizes while Manila is probably calibrated for the WM6.5 bars (indeed there's empty space at the top and overlap at the bottom). There is probably something else you have to do to fix manila after changing the windows mobile build but I'm pretty sure it's not a kitchen problem I've had several people reporting the Leo ROMs dump and build fine with the 1.31 betas.
Is anyone willing to assist me on getting a Stock HD2 rom and upgrading it to 6.5.x without the problems I am seeing ?
5haddex said:
Is anyone willing to assist me on getting a Stock HD2 rom and upgrading it to 6.5.x without the problems I am seeing ?
Click to expand...
Click to collapse
Could you post a screenshot of your problem, and if you upload your background, i will use it to replace the one in HTC Black.TSK (You need OCP CE CAB Manager)
I have posted a screenie of the problem and someone says its because manila is not the correct version for the 6.5.5 im using.
Dont suppose you have a 6.5.5 stock rom ???
So...
Can anyone let me have a oskitchen with 6.5.x + latest manila so I can add to it.
***********How to get Manila Sense working on 6.5.x ROMS***********
I have got a copy of sense 2.5.2014 wwe working with 6.5.5 OS. This version clears up issues with Sense not loading and the screen not loading correctly.
I can see a lot of people have been having some difficulty with this so I have provided a Downlaod link:
http://www.megaupload.com/?d=XSAZB44F - This is manila 2014. I have tested on my HD2 and the only issue I can see is Interent Explorer buttons are not quite right, if anybody can resolve this that would be great. I am working on 2016 now to see if I can sort as well. If I can I will upload it as well.!!
This has been tested on an HD2 with 1.66 WWE stock from and sense 23569.
Delete all existing manila and start icon folders in your EXT folder and simply replace with the ones in the zip file.
GhostXSeries said:
***********How to get Manila Sense working on 6.5.x ROMS***********
I have got a copy of sense 2.5.2016 wwe working with 6.5.5 OS. I can see a lot of people have been having some difficulty with this so I have provided a Downlaod link:
http://www.megaupload.com/?d=4NVBEING
Delete all existing manila and start icon folders in your EXT folder and simply replace with the ones in the zip file.
Click to expand...
Click to collapse
Not work for me... my ROM is spanish not WWE
Please, ¿what is your method for this problem?
...Sorry for my no-english ;-)
not working for me, although it boots up fine. if i scroll to settings only the data and wireless settings bit works and on home screen menu doesn't work, using 2.13 rom and 23569
Demon_man said:
not working for me, although it boots up fine. if i scroll to settings only the data and wireless settings bit works and on home screen menu doesn't work, using 2.13 rom and 23569
Click to expand...
Click to collapse
Did you remove the start Icon loader folder? I had similar problems untill I removed this. I can confirm that all settings is working on the rom!
tonofu said:
Not work for me... my ROM is spanish not WWE
Please, ¿what is your method for this problem?
...Sorry for my no-english ;-)
Click to expand...
Click to collapse
I'm affraid that I only was able to build for an english ROM WWE. I will try and make up an instruction set for building other languages.
Has anybody else got it working, I have it fully working on my HD2 I would be keen to hear responses.
Can anyone upload it to hotfile? I wanna test it but cant download the file!!!
I cant download it through megaupload, it stops at the middle everytime.
GhostXSeries said:
Did you remove the start Icon loader folder? I had similar problems untill I removed this. I can confirm that all settings is working on the rom!
Click to expand...
Click to collapse
i extracted the download and deleted out my manila files and start icon and then copied over the new ones. i dont know something not right
When I get a chance I will upload my copy of kitchen for people as well. I just have not had a lot of time this week. I will try and get it sorted this evening for you.
Demon_man said:
i extracted the download and deleted out my manila files and start icon and then copied over the new ones. i dont know something not right
Click to expand...
Click to collapse
What issue are you having? What is your base rom you are using?
GhostXSeries said:
What issue are you having? What is your base rom you are using?
Click to expand...
Click to collapse
Tmous 2.13 dumped rom, 23569 os, my menu buttons and the tabs when i scroll to settings just do nothing i i cant get into settings via the shortcut either
Demon_man said:
Tmous 2.13 dumped rom, 23569 os, my menu buttons and the tabs when i scroll to settings just do nothing i i cant get into settings via the shortcut either
Click to expand...
Click to collapse
I have tested it using a HTC HD2 stock rom version 1.66, that might be were your issue is. Try that and see how you get on. I am still playing around with the build. If I can get one I am completly happy with, I will upload my kitchen folder with both OS and sense for people to use.
hi!
Excuse me, and what about screen? Is it only for WVGA?
I'm making ROM for my Acer S200...
Much things run correctly, except HTC Album. There is no any error pop up.
However, manila Photo tab "seems" work. I could not set wallpaper in setting tab and could not select pic in contact tab.
I have these packages got from
RUU_Leo_S_HTC_Asia_TW_3.04.709.1_Radio_Signed_15.40.50.07U_2.12.50.02_2_Ship.exe
Code:
PACKAGE_LEO_S_Album
PACKAGE_LEO_S_Album_0404
PACKAGE_LEO_S_AppointmentEditor
PACKAGE_LEO_S_AppointmentEditor_0404
PACKAGE_LEO_S_App_Service
PACKAGE_LEO_S_App_Service_0404
PACKAGE_LEO_S_Audio_Manager_Engine
PACKAGE_LEO_S_Audio_Manager_Engine_0404
PACKAGE_LEO_S_Boot_Launcher
PACKAGE_LEO_S_Boot_Launcher_0404
PACKAGE_LEO_S_BrowserSnapshot
PACKAGE_LEO_S_BrowserSnapshot_0404
PACKAGE_LEO_S_CommManager_HTC_ALL
PACKAGE_LEO_S_CommManager_HTC_ALL_0404
PACKAGE_LEO_S_Contact_Picker
PACKAGE_LEO_S_Contact_Picker_0404
PACKAGE_LEO_S_Contact_Utility_Engine
PACKAGE_LEO_S_Contact_Utility_Engine_0404
PACKAGE_LEO_S_DataDisconnect
PACKAGE_LEO_S_DataDisconnect_0404
PACKAGE_LEO_S_DeviceInfo
PACKAGE_LEO_S_DeviceInfo_0404
PACKAGE_LEO_S_DRM_Middleware
PACKAGE_LEO_S_DRM_Middleware_0404
PACKAGE_LEO_S_Dshow
PACKAGE_LEO_S_Dshow_0404
PACKAGE_LEO_S_Facebook_Engine
PACKAGE_LEO_S_Facebook_Engine_0404
PACKAGE_LEO_S_GoogleLocationService
PACKAGE_LEO_S_GoogleLocationService_0404
PACKAGE_LEO_S_GroupEditor
PACKAGE_LEO_S_GroupEditor_0404
PACKAGE_LEO_S_HTCAnimation
PACKAGE_LEO_S_HTCAnimation_0404
PACKAGE_LEO_S_HTCApplication
PACKAGE_LEO_S_HTCApplication_0404
PACKAGE_LEO_S_HTCBookmark
PACKAGE_LEO_S_HTCBookmark_0404
PACKAGE_LEO_S_HTCFramework
PACKAGE_LEO_S_HTCFramework_0404
PACKAGE_LEO_S_HTCGeoService
PACKAGE_LEO_S_HTCGeoService_0404
PACKAGE_LEO_S_HTCScroll
PACKAGE_LEO_S_HTCScroll_0404
PACKAGE_LEO_S_HTCStartUp
PACKAGE_LEO_S_HTCStartUp_0404
PACKAGE_LEO_S_HTCUtil
PACKAGE_LEO_S_HTCUtil_0404
PACKAGE_LEO_S_Manila_Calendar
PACKAGE_LEO_S_Manila_Calendar_0404
PACKAGE_LEO_S_Manila_Core
PACKAGE_LEO_S_Manila_Core_0404
PACKAGE_LEO_S_Manila_Home
PACKAGE_LEO_S_Manila_Home_0404
PACKAGE_LEO_S_Manila_Internet
PACKAGE_LEO_S_Manila_Internet_0404
PACKAGE_LEO_S_Manila_Mail
PACKAGE_LEO_S_Manila_Mail_0404
PACKAGE_LEO_S_Manila_Message
PACKAGE_LEO_S_Manila_Message_0404
PACKAGE_LEO_S_Manila_Music
PACKAGE_LEO_S_Manila_Music_0404
PACKAGE_LEO_S_Manila_People
PACKAGE_LEO_S_Manila_People_0404
PACKAGE_LEO_S_Manila_Photo
PACKAGE_LEO_S_Manila_Photo_0404
PACKAGE_LEO_S_Manila_Settings
PACKAGE_LEO_S_Manila_Settings_0404
PACKAGE_LEO_S_Manila_Stock
PACKAGE_LEO_S_Manila_Stock_0404
PACKAGE_LEO_S_Manila_Twitter
PACKAGE_LEO_S_Manila_Twitter_0404
PACKAGE_LEO_S_Manila_Weather
PACKAGE_LEO_S_Manila_Weather_0404
PACKAGE_LEO_S_Media_Tool_kit
PACKAGE_LEO_S_Media_Tool_kit_0404
PACKAGE_LEO_S_Menu_Enhancement
PACKAGE_LEO_S_Menu_Enhancement_0404
PACKAGE_LEO_S_mHub_VO
PACKAGE_LEO_S_mHub_VO_0404
PACKAGE_LEO_S_MyCPL
PACKAGE_LEO_S_MyCPL_0404
PACKAGE_LEO_S_New_Contact_Card
PACKAGE_LEO_S_New_Contact_Card_0404
PACKAGE_LEO_S_Phone_Canvas_Enhancement_2G
PACKAGE_LEO_S_Phone_Canvas_Enhancement_2G_0404
PACKAGE_LEO_S_Power
PACKAGE_LEO_S_Power_0404
PACKAGE_LEO_S_Resource_Proxy
PACKAGE_LEO_S_Resource_Proxy_0404
PACKAGE_LEO_S_Sensor_SDK
PACKAGE_LEO_S_Sensor_SDK_0404
PACKAGE_LEO_S_Settings_Improvement
PACKAGE_LEO_S_Settings_Improvement_0404
PACKAGE_LEO_S_SharedResource
PACKAGE_LEO_S_SharedResource_0404
PACKAGE_LEO_S_Shared_Modules
PACKAGE_LEO_S_Shared_Modules_0404
PACKAGE_LEO_S_Social_Networks_Engine
PACKAGE_LEO_S_Social_Networks_Engine_0404
PACKAGE_LEO_S_StartIconLoader
PACKAGE_LEO_S_StartIconLoader_0404
PACKAGE_LEO_S_Text_Selection
PACKAGE_LEO_S_Text_Selection_0404
PACKAGE_LEO_S_TimeZoneAutoFix
PACKAGE_LEO_S_TimeZoneAutoFix_0404
PACKAGE_LEO_S_VBookmarkMgr
PACKAGE_LEO_S_VBookmarkMgr_0404
PACKAGE_LEO_S_zlibce_m
PACKAGE_LEO_S_zlibce_m_0404
Nagato Yuki said:
I'm making ROM for my Acer S200...
Much things run correctly, except HTC Album. There is no any error pop up.
However, manila Photo tab "seems" work. I could not set wallpaper in setting tab and could not select pic in contact tab.
I have these packages got from
RUU_Leo_S_HTC_Asia_TW_3.04.709.1_Radio_Signed_15.40.50.07U_2.12.50.02_2_Ship.exe
Code:
PACKAGE_LEO_S_Album
PACKAGE_LEO_S_Album_0404
PACKAGE_LEO_S_AppointmentEditor
PACKAGE_LEO_S_AppointmentEditor_0404
PACKAGE_LEO_S_App_Service
PACKAGE_LEO_S_App_Service_0404
PACKAGE_LEO_S_Audio_Manager_Engine
PACKAGE_LEO_S_Audio_Manager_Engine_0404
PACKAGE_LEO_S_Boot_Launcher
PACKAGE_LEO_S_Boot_Launcher_0404
PACKAGE_LEO_S_BrowserSnapshot
PACKAGE_LEO_S_BrowserSnapshot_0404
PACKAGE_LEO_S_CommManager_HTC_ALL
PACKAGE_LEO_S_CommManager_HTC_ALL_0404
PACKAGE_LEO_S_Contact_Picker
PACKAGE_LEO_S_Contact_Picker_0404
PACKAGE_LEO_S_Contact_Utility_Engine
PACKAGE_LEO_S_Contact_Utility_Engine_0404
PACKAGE_LEO_S_DataDisconnect
PACKAGE_LEO_S_DataDisconnect_0404
PACKAGE_LEO_S_DeviceInfo
PACKAGE_LEO_S_DeviceInfo_0404
PACKAGE_LEO_S_DRM_Middleware
PACKAGE_LEO_S_DRM_Middleware_0404
PACKAGE_LEO_S_Dshow
PACKAGE_LEO_S_Dshow_0404
PACKAGE_LEO_S_Facebook_Engine
PACKAGE_LEO_S_Facebook_Engine_0404
PACKAGE_LEO_S_GoogleLocationService
PACKAGE_LEO_S_GoogleLocationService_0404
PACKAGE_LEO_S_GroupEditor
PACKAGE_LEO_S_GroupEditor_0404
PACKAGE_LEO_S_HTCAnimation
PACKAGE_LEO_S_HTCAnimation_0404
PACKAGE_LEO_S_HTCApplication
PACKAGE_LEO_S_HTCApplication_0404
PACKAGE_LEO_S_HTCBookmark
PACKAGE_LEO_S_HTCBookmark_0404
PACKAGE_LEO_S_HTCFramework
PACKAGE_LEO_S_HTCFramework_0404
PACKAGE_LEO_S_HTCGeoService
PACKAGE_LEO_S_HTCGeoService_0404
PACKAGE_LEO_S_HTCScroll
PACKAGE_LEO_S_HTCScroll_0404
PACKAGE_LEO_S_HTCStartUp
PACKAGE_LEO_S_HTCStartUp_0404
PACKAGE_LEO_S_HTCUtil
PACKAGE_LEO_S_HTCUtil_0404
PACKAGE_LEO_S_Manila_Calendar
PACKAGE_LEO_S_Manila_Calendar_0404
PACKAGE_LEO_S_Manila_Core
PACKAGE_LEO_S_Manila_Core_0404
PACKAGE_LEO_S_Manila_Home
PACKAGE_LEO_S_Manila_Home_0404
PACKAGE_LEO_S_Manila_Internet
PACKAGE_LEO_S_Manila_Internet_0404
PACKAGE_LEO_S_Manila_Mail
PACKAGE_LEO_S_Manila_Mail_0404
PACKAGE_LEO_S_Manila_Message
PACKAGE_LEO_S_Manila_Message_0404
PACKAGE_LEO_S_Manila_Music
PACKAGE_LEO_S_Manila_Music_0404
PACKAGE_LEO_S_Manila_People
PACKAGE_LEO_S_Manila_People_0404
PACKAGE_LEO_S_Manila_Photo
PACKAGE_LEO_S_Manila_Photo_0404
PACKAGE_LEO_S_Manila_Settings
PACKAGE_LEO_S_Manila_Settings_0404
PACKAGE_LEO_S_Manila_Stock
PACKAGE_LEO_S_Manila_Stock_0404
PACKAGE_LEO_S_Manila_Twitter
PACKAGE_LEO_S_Manila_Twitter_0404
PACKAGE_LEO_S_Manila_Weather
PACKAGE_LEO_S_Manila_Weather_0404
PACKAGE_LEO_S_Media_Tool_kit
PACKAGE_LEO_S_Media_Tool_kit_0404
PACKAGE_LEO_S_Menu_Enhancement
PACKAGE_LEO_S_Menu_Enhancement_0404
PACKAGE_LEO_S_mHub_VO
PACKAGE_LEO_S_mHub_VO_0404
PACKAGE_LEO_S_MyCPL
PACKAGE_LEO_S_MyCPL_0404
PACKAGE_LEO_S_New_Contact_Card
PACKAGE_LEO_S_New_Contact_Card_0404
PACKAGE_LEO_S_Phone_Canvas_Enhancement_2G
PACKAGE_LEO_S_Phone_Canvas_Enhancement_2G_0404
PACKAGE_LEO_S_Power
PACKAGE_LEO_S_Power_0404
PACKAGE_LEO_S_Resource_Proxy
PACKAGE_LEO_S_Resource_Proxy_0404
PACKAGE_LEO_S_Sensor_SDK
PACKAGE_LEO_S_Sensor_SDK_0404
PACKAGE_LEO_S_Settings_Improvement
PACKAGE_LEO_S_Settings_Improvement_0404
PACKAGE_LEO_S_SharedResource
PACKAGE_LEO_S_SharedResource_0404
PACKAGE_LEO_S_Shared_Modules
PACKAGE_LEO_S_Shared_Modules_0404
PACKAGE_LEO_S_Social_Networks_Engine
PACKAGE_LEO_S_Social_Networks_Engine_0404
PACKAGE_LEO_S_StartIconLoader
PACKAGE_LEO_S_StartIconLoader_0404
PACKAGE_LEO_S_Text_Selection
PACKAGE_LEO_S_Text_Selection_0404
PACKAGE_LEO_S_TimeZoneAutoFix
PACKAGE_LEO_S_TimeZoneAutoFix_0404
PACKAGE_LEO_S_VBookmarkMgr
PACKAGE_LEO_S_VBookmarkMgr_0404
PACKAGE_LEO_S_zlibce_m
PACKAGE_LEO_S_zlibce_m_0404
Click to expand...
Click to collapse
I`m guessing you're using latest Media_Tool_kit? I faced the same problem when cooking com2 with latest Media_Tool_kit.
patensas said:
I`m guessing you're using latest Media_Tool_kit? I faced the same problem when cooking com2 with latest Media_Tool_kit.
Click to expand...
Click to collapse
Yes, I'm cooking COM2 build 21911... Sorry for not mention at first post.
Maybe Media_Tool_kit from Leo S 3.04 could be the latest one, but I'm not sure that Official Leo one (with Sense 2.5.1921) could be used or not, as I'm at work now, much thanks for your information.
Edit: But I thinks that I'm lack something instead of package version, seems that Arto could use the Official Leo one (1_2_19203325_0)...
Nagato Yuki said:
Yes, I'm cooking COM2 build 21911... Sorry for not mention at first post.
Maybe Media_Tool_kit from Leo S 3.04 could be the latest one, but I'm not sure that Official Leo one (with Sense 2.5.1921) could be used or not, as I'm at work now, much thanks for your information.
Edit: But I thinks that I'm lack something instead of package version, seems that Arto could use the Official Leo one (1_2_19203325_0)...
Click to expand...
Click to collapse
Well who knows, let me know
patensas said:
Well who knows, let me know
Click to expand...
Click to collapse
I found the strange problem, even the version of HTCAlbum was the same, but the size of them are different !
The usable HTCAlbum.exe could be 483,288 Bytes, but one I get form Leo could be 1,293,824 Bytes !
I don't know the different of them...
Try adding the picture_enhancement package
When I found the size of these files change, I know I'm fail to recognize these files are UPX compressed.
I'm flashing my rom to test whether this cause the problem...
I could report it later
BTW, could any one know what's the maximum executable file size?
Media Toolkit is the one responsible to perform 'Photo picker' .
But finally I could not use either HTC Album and Media Tool kit from Leo HK or Leo S TW ROM, but from Arto's Acer ROM
It seems the problem could not be solve until reason found...
Then, I put these two file here, to let someone help me
The non-working one is from
RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe
and The working one is from Arto's Acer ROM
http://forum.xda-developers.com/showthread.php?t=642654
Bump for visible
The diffrent between your two exe's is, that the file in your HTCAlbum_workone.zip is upx-comressed. That's all.
icke said:
The diffrent between your two exe's is, that the file in your HTCAlbum_workone.zip is upx-compressed. That's all.
Click to expand...
Click to collapse
Yes, one is upx-compressed. However, even both uncompressed, it seems I have to patch it from official ROM to be used on non-HTC phone...
rafyvitto said:
HI, im sorry to say but i was not the one who patched these packages to skip device id check, it was dimice from acerclub.ru il try to contact him and get back to you.
rafyvitto
Click to expand...
Click to collapse
Since I could not understand Russian, then I still have no idea to patch them...
Greetings!
First off, I have little idea what I'm doing, this is my first attempt to create a custom ROM. I've searched around and can't seem to find a solution.
I've got an Xperia X1 and am using osKitchen.
The ultimate goal is to have a Japanese ROM with WM build 25369 with no additional UIs, i never use sense or whatever anyway, just the old today screen with cal, messaging, and time/date items.
I have:
Latest stock ROM for X1 (GENERIC_NAM_R3AA011)
23569_MSXIPKernel_SYS_QVGA_WQVGA_VGA_WVGA_0409 (Just Eng)
initflashfiles-dat-all-langs-updated-feb-24-2010.zip
RUU_Diamond_eMobile_JPN_1.81.881.2_Radio_Signed_Diamond_52.48.25.26_1.09.25.07_Ship.exe (6.1 JPN ROM)
Kovsky-xip-bin-oemxipkernel-nk-exe-native-WM65.zip
WM6550-23563-Rollup-All-Pkgs.rar (This has all languages)
Here's what I'm doing, anyone of them (or all) could be very wrong, hopefully I've done at least one thing right:
Imported X1 ROM for OEMDrivers, OEMApps, OEMOperators, oemversion, oem_dpi
Imported 6.1 JPN ROM for OEM Lang 411
-What i did here is i copied everything over from the JPN rom's oem 411 folder into the X1 OEM Lang folder, overwrote any conflicts, deleted any 0409 muis, and copied over the file from initflashfiles zip for 0411.
Replaced OEMXipKernel with the one from Kovsky-xip-bin-oemxipkernel-nk-exe-native-WM65.zip and selected custom XIP when making the rom with the one also found in that zip. Put the rest of the files (os.nb.payload, xip.bin, uldr.nb0, romhdr.bin) into the ROM Parts folder.
Then, I Used OS, OSFiles, MSXIPKernel, MSXIPKernelLTK from the 23569_MSXIPKernel_SYS_QVGA_WQVGA_VGA_WVGA_0409 zip, and the rest of the packages i used from the WM6550-23563-Rollup-All-Pkgs rar (because it had 0411 files).
I deleted dpi and lang folders that my device doesn't use (it uses 192dpi 480x800 and 0411) and built the ROM, flashed, and it shows the Sony Ericsson splash screen, and then goes black forever.
I know I must be doing something very wrong, any hints as to what?
Thanks
Pfff, what a big list,
Okay I did it this way, and I make my rom in 12 languages and they are all working.
1. Install oskitchen and import xperia rom
2. After finishing import 23563 build
3. Install another oskitchen and import diamond jpn rom
4. Copy the oem_lang 0411 and the ext packages to your kovsky kitchen be aware you put them in the right place.
5. Open the kovsky kitchen and select the Japanese language and select the packages you wanna use in your rom and you're done.
Regards,
Cool thanks!
That would be for 23563 though right? What if i wanted to use 23569 with 23563 packages? ....No real reason, higher number, figure it's better somehow....that even possible?
nemasu said:
Cool thanks!
That would be for 23563 though right? What if i wanted to use 23569 with 23563 packages? ....No real reason, higher number, figure it's better somehow....that even possible?
Click to expand...
Click to collapse
Just start with 23563, it's a good package and if you have a working rom you can alway's make the change.
Greetz,
Rataplan said:
Just start with 23563, it's a good package and if you have a working rom you can alway's make the change.
Greetz,
Click to expand...
Click to collapse
Ok sounds good, I was just thinking I probably shoulda tried with something a bit easier haha.....how would i make the change? is my approach correct?
nemasu said:
Ok sounds good, I was just thinking I probably shoulda tried with something a bit easier haha.....how would i make the change? is my approach correct?
Click to expand...
Click to collapse
If you extract the 23569 build, you only have to change the All and Common folder, but in your first post you where talking about a 25369 build and I didn't know what kind off build that was.
Succes buddy,
Make sure you have the proper wince.nls in your build. If you leave it out, the rom won't boot.
Farmer Ted said:
Make sure you have the proper wince.nls in your build. If you leave it out, the rom won't boot.
Click to expand...
Click to collapse
I used the one that came with the Kovsky-xip-bin-oemxipkernel-nk-exe-native-WM65 zip.
nemasu said:
I used the one that came with the Kovsky-xip-bin-oemxipkernel-nk-exe-native-WM65 zip.
Click to expand...
Click to collapse
I don't think there is any difference between those 2 wince.nls but if you wanna be sure just use the one in the 23563/COMMON folder.
Rataplan said:
I don't think there is any difference between those 2 wince.nls but if you wanna be sure just use the one in the 23563/COMMON folder.
Click to expand...
Click to collapse
Hmm, I've got a wince.nls in:
Sources\Devices\HTC Kovsky\Profiles\default\OEMXipKernel
Sources\Windows Mobile Builds\23569\0411\WinCENLS_Lang_0411
and
Sources\Windows Mobile Builds\23569\Common\WinCENLS_WWE
they are all different sizes....should they all be the same? or only have one? or?
nemasu said:
Hmm, I've got a wince.nls in:
Sources\Devices\HTC Kovsky\Profiles\default\OEMXipKernel
Sources\Windows Mobile Builds\23569\0411\WinCENLS_Lang_0411
and
Sources\Windows Mobile Builds\23569\Common\WinCENLS_WWE
they are all different sizes....should they all be the same? or only have one? or?
Click to expand...
Click to collapse
No I have them also, never take a look at it, only checked the file when I cooked my rom's never changed anything or replaced it with another version or from another build.
Problem with Phone Canvas Enhancement 2G v4.0.52619223128.0 in com2 build.
Hi all, just have an issue and I can't point the finger on the right place to get this one solved
So I'm asking for some help, I'm using the Phone Canvas Enhancement mentioned above, and it works perfect on a com3 build but
for some reason when I cooked this one in a com2 build the options for the dialer are not working.
I'm using the same kitchen, for com3 and com2 with the same pkg's and everything is working the way it should work.
Only in the com2 build I'm not able to setup the call-specific options.
Already changed the mui files, used another dummy_sqm but still no difference.
The com2 build I'm using is 21916, also tried 21914 but no difference.
Someone else have any idea ?
Thanks,
Ok, just want to give it one more try so BUMP
Hi,
Did you dump the rom yourself or are you using predumped packages?
Phonecanvas in com 3 needs some fixes like the softkeypad.
Also did you look in operatorpkg?
Have a look there which phcanOverbmp.
Is it HTC or T-Mous?
That's all I can think of.
Laurentius26 said:
Hi,
Did you dump the rom yourself or are you using predumped packages?
Phonecanvas in com 3 needs some fixes like the softkeypad.
Also did you look in operatorpkg?
Have a look there which phcanOverbmp.
Is it HTC or T-Mous?
That's all I can think of.
Click to expand...
Click to collapse
I dumped the rom myself, import the 23569 build and import the 21916 build, made a small change on the 21916 build (changed office mobile to office mobile 2010) and edit the file phcanrc, build rom in 23569 no problem, and in 21916 issue with the options.
There is not much left in my operatorpkg only the animated.gif and the Mega_phcanOverbmp, so I have to see if that causes the issue, but I still think it's strange that I don't have it with the 23569 build.
For now really thanks for the info, I'm gonna work on it and keep you informed if this will solve it.
Btw nice site you have
Greetz,
Try to use the phonecanvas as it's (if possible) and use the correspondending phcan in operatorpkg.
Another thing you need to check is the reg in operatorpkg, if it directs to the phcan you are using.
In my case:
[HKEY_LOCAL_MACHINE\Security\ResOver\Bitmaps]
"Basedll"="leo_phcanOverbmp.dll"
"BaseId"=dword:00000000
"BatteryIconIdStart"=dword:000003E9
"BatteryIconLevels"=dword:00000015
Click to expand...
Click to collapse
Thanks for the compliment about the site.
Rataplan said:
and edit the file phcanrc, build rom in 23569 no problem, and in 21916 issue with the options.
There is not much left in my operatorpkg only the animated.gif and the Mega_phcanOverbmp, so I have to see if that causes the issue, but I still think it's strange that I don't have it with the 23569 build.
Greetz,
Click to expand...
Click to collapse
What do you mean with "call specific options"?
pkoper said:
What do you mean with "call specific options"?
Click to expand...
Click to collapse
I mean the advanced options, sounds, network, gsm/umts, headset it's a submenu from the dialer, I think that Laurentius26 is right because I miss the registry key for phcan, I'm gonna check it this evening.
Still wondering why I don't have a problem with a com3 build.
Keep you all informed
Somewhere in sys, maybe Phone or Phoneredist I can't remember, it is set to not display.
Check your reg for
[HKEY_LOCAL_MACHINE\ControlPanel\Phone]
remove
redirect=""
if its there.
pkoper said:
Somewhere in sys, maybe Phone or Phoneredist I can't remember, it is set to not display.
Check your reg for
[HKEY_LOCAL_MACHINE\ControlPanel\Phone]
remove
redirect=""
if its there.
Click to expand...
Click to collapse
Okay thanks gonna try that, because changing the reg. made my kitchen crash.
Greetz,
Ok, I give up, I build 12 roms with 21916 (all different languages) until I noticed the issue, went back to 21914, same issue.
Tried what you both suggested, kitchen start crashing, went back to the original 21854 with the same pkg everything working normal also the options menu in the dialer.
So the problem must be in the changing the office pkg or a kitchen-update because thats are the only things I've changed.
And I'm not even sure about the kitchen-update.
For now I'm not sure what I've changed to give an honest answer if I get this solved.
Just want to say thanks the both of you, together is power
Regards,
I went through some unmodified builds.
The reg key is in the rgu in SYS\Phone....
[HKEY_LOCAL_MACHINE\ControlPanel\Phone]
"Redirect"=-
Sorry, made a mistake in the previous post
pkoper said:
I went through some unmodified builds.
The reg key is in the rgu in SYS\Phone....
[HKEY_LOCAL_MACHINE\ControlPanel\Phone]
"Redirect"=-
Sorry, made a mistake in the previous post
Click to expand...
Click to collapse
Yes, I know, I already found that reg key, but for some reason my kitchen keeps on crashing when I use the 21916 build, so I can not tell you if the trick you told me is working.
In short what I tried:
1. Edit the reg key for the phcan.
2. Deleting the reg key in the Phone pkg.
3. Changing the Phone pkg and use the one from 21854.
4. Building without ext-pkg
5. Make a switch to 21914 and repeated the 4 steps mentioned above.
But for now the kitchen keeps on crashing when I'm using the 21914 or 21916 build, which is very strange because I cooked several roms with it also cooked without the office pkg but still no change.
For now I'm gonna download another com2 build and see if that will do the trick.
In Dutch: Schiet mij maar lek.
In English: Shoot me.
And again really thanks for trying to help me.
Greetz,
Sorry forget my post.
Ok downloading and importing the 21916 again did the trick, download the build from mobileunderground, normally I used the builds from ppckitchen not sure if they are different.
The only thing I can think about for now is that when I'm upgrading my kitchen, went from 1.25 to 133.3 (oskitchen) always in small steps but the only thing I changed was the exe file and the resource folder, and maybe there it went wrong.
I know it is not a real solution but for me this one is solved.
Thanks,