I had a hd2 with 208 spl and rooted it just fine,but had to send in for a replacement and now want to root this one and haveing a hell of time... so i need to revert back to 2.08 spl but how??? can i do it via active sync? i tryed to go back on the hd2 i sent in via sd card and bricked it...when i did all the steps it went to the loading screen and said updating got about 20 percent and then shut off on its own and was never able to get the phone to come back on ....even tryed to plug it in to compter and nothing. SO can someone please help me with detailed instuctions....thank you very much/////ok so when you have a stock hd2 and need to revert back to 2.08 spl to flash hspl just flsh a previous version of a stock rom
helo
you ned a gold card!
some happend to me
you need a microsd card
you need his cid number
make a gold card
flash 2.10.0 rom
flash hard spl 2.08
then flash original stock rom for your hd2
if you want more help contact me. i alredy restore my phone
thanks for the reply....but i have no idea what a gold card is and is it for the usa version hd2?
And also i was wanting to root my new hd2 that has 2.10 spl but to do that i have to revert back to 2.08 spl and i have no idea how to do that....dont want to brick this phone too!!
dan dees said:
And also i was wanting to root my new hd2 that has 2.10 spl but to do that i have to revert back to 2.08 spl and i have no idea how to do that....dont want to brick this phone too!!
Click to expand...
Click to collapse
I was able to downgrade my SPL 2.10.0000 to 2.08.HSPL simply by us by using one of the earlier roms listed here [URL="http://forum.xda-developers.com/showthread.php?t=655653"[/URL] first then running the HSPL2_1024 and choosing 2.08.HSPL from the list.
dan dees said:
And also i was wanting to root my new hd2 that has 2.10 spl but to do that i have to revert back to 2.08 spl and i have no idea how to do that....dont want to brick this phone too!!
Click to expand...
Click to collapse
I was able to downgrade my SPL 2.10.0000 to 2.08.HSPL simply by us by using one of the earlier roms listed here first then running the HSPL2_1024 and choosing 2.08.HSPL from the list.
To the OP,
Please don't make duplicate threads on the same subject.
Thanks
WB
Related
So i wanted to go back to the regular ROM for a while but i went to the updated one that just came out yesterday. Then after this loaded, i remember why i switched to ChuckyROM. So i tried to flash the HardSPL to it again but it had a popup that said BAD SPL!
So are there any fixes or advice for this problem?
I'm a complete noob.
So you just flash 2.13 Official T-Mobile rom using sdcard? if it is true than you cant HSPL your device since you are not on SPL 2.08 any more. Your HSPL is overwritten when flashing using memory card.
Maybe you can flash back to 2.10 rom using memory card method to get 2.08 SPL then HSPL you device from there.
I might be wrong so anyone please correct me.
Yeah I couldn't find anything in search so I read around and that's what I got. If this doesn't work then eff me. ):
Post HardSPL questions in the already open HARDSPL thread dude!
And you'll want to flash the 2.10 rom from you're sd card to give you spl 2.08, Then you will be able to HARDSPL you're phone and flash custom rom's of you're choice..
Peace,
Joshua
Hello, i am new to the HD2 and i want to unlock it to install new roms. I checked my spl and i am running 2.10 and not 2.08 so the exe file that is given wont work. It says it is corrupt and it wont install. Is there a way tdowngrade the spl to 2.08 from 2.10?
Install the factory 2.10.1 ROM via your SD so that your SPL will be changed to 2.08. Then you should be able to use HSPL for 1024.
~Jasecloud4
ruben8448 said:
Hello, i am new to the HD2 and i want to unlock it to install new roms. I checked my spl and i am running 2.10 and not 2.08 so the exe file that is given wont work. It says it is corrupt and it wont install. Is there a way tdowngrade the spl to 2.08 from 2.10?
Click to expand...
Click to collapse
Use the link in my sig. It will walk you through downgrading your SPL
Do i need to use hspl to flash my rom to make android work on it? just a bit confused, sorry. i have spl 2.10 running can some one help me out.
thanks.
MANN1202 said:
Do i need to use hspl to flash my rom to make android work on it? just a bit confused, sorry. i have spl 2.10 running can some one help me out.
thanks.
Click to expand...
Click to collapse
Yes, flash HSPL3, then run a Task29, then flash your preferred ROM.
Problem getting to spl 2.08 - please help
HI,
I've done my share of reading on this (my favorite) and other forums. Most recommend using HSPL3 for going back to SPL 2.08. I've tried that may times - unsuccessfully though...
Can anyone suggest what am I doing wrong?
==========
--- I currently have SPL 2.10.0000 8G XE
---I formatted the memory card to MS-DOS(FAT) (using disk utility)
---I am using ActiveSync....
---when I previously tried using HSPL3 I get to the screen where it should load to 100%, but never get to where it says "successfully hacked" or whatever it says when done; In my case it just loads up and then goes down... It can do that for hours if you let it.
Any help is appreciated as I am dying to see android running on this babe. Tx
---SJ
I have a custom ROM on my device and I need to go to T-Mobile for warranty.
Can I install a T-Mobile ROM, T-Mobile_HD2_MR_Software_2.13.531.1.rar, I downloaded from their website, without creating any problems or bricking my phone?
I not asking for any guarantees, just a professional opinion.
Thanks to all for all the great work.
run hspl3, choose 2.08.0000 this will remove hspl, then flash the rom you mentioned, (just run the .exe, no need for sd card) which will return to stock the rom, radio and spl
I'm not an expert by any stretch but from the research I've done I would surmise you have to A. Change back to SPL 2.8.0000. I just changed my HSPL back to SPL 2.08.0000 based on the answer to my thread and then B. reflash the TMOUS stock ROM. I have read that reflashing the ROM will revert the SPL from 2.8.0000 to 2.10.000 which is where I started. I have seen people state that even after relashing the SPL is still 2.8.0000 so then the next step is flashing from the SD card as instructed in the tutorial on the HardSPL exe file. Hope this helps.
Birdsfan said:
I'm not an expert by any stretch but from the research I've done I would surmise you have to A. Change back to SPL 2.8.0000. I just changed my HSPL back to SPL 2.08.0000 based on the answer to my thread and then B. reflash the TMOUS stock ROM. I have read that reflashing the ROM will revert the SPL from 2.8.0000 to 2.10.000 which is where I started. I have seen people state that even after relashing the SPL is still 2.8.0000 so then the next step is flashing from the SD card as instructed in the tutorial on the HardSPL exe file. Hope this helps.
Click to expand...
Click to collapse
I just installed the stock TMO ROM and my SPL is back to 2.10.0000, just as it came from the factory so I am good to go!! Thank you samsamuel, your instructions were right on!
Thanks too All
I will charge the phone up tonight and get er done tomorrow.
Just curious, what would happen if I installed the T-Mobile ROM without removing HSPL?
Thank you all for the help.
captirwin said:
Just curious, what would happen if I installed the T-Mobile ROM without removing HSPL?
Click to expand...
Click to collapse
your hspl would stay at 2.08.hspl
Got er Done
I'd like to thank samsamuel and birdsfan for the help and support.
I'm back to original.
THANKS
Hi everyone,in advance i would like to tank everyone that take the time to read this threat!!!here is my question...i had a Nand Android Rom on my Hd2 and unfutunaly the phone stop getting signal(phone's problem)and i have to send it back to Tmobile.i read all the theats i was able to,and to what i understood i had to flash a stock windows 6.5 rom,i also read on a theat that any SPL ending on .0000 would valid my warranty!!!every thing its done to the phone...i now have a stock rom and my SPL is 2.08.0000. My question is...is this the right SPL for US T-moblile users?if not,can anyone link me to where i can find it?ones again guys!!!thanks a lot for the time!!!
That all depends on the build, it could also be 2.10.0000 or 3.03.0000. If you flash the original rom from the sd card you will get the correct spl version back as that is also installed.
If u have a SPLhigherthan 3.03, is that bad? Or just different? Cause when i got my phone back from repair i could play andriod on SPL 3.03 (or higher) and i had to downgrade my HD2
Not necessarily bad, it's just that the tools to "hack" the spl to allow you to install other roms does not work with spl 3.03.0000. The way around this is to downgrade the rom and with it the spl version to 2.10.0000 so that you can run HSPL.
Hi all. My phone seem to have hardware problem.Can you tell me what spl and radio should I install before I take my HD2 T8585 to service center? I can't remember what it was.
My phone still has 6 months warranty.
I have Tmous, and radio is 2.15.50.14
Just download the official ROM for your HD2 and flash it via SD card. This will revert you to the stock radio, ROM, splash screen, and SPL.
T-Macgnolia said:
Just download the official ROM for your HD2 and flash it via SD card. This will revert you to the stock radio, ROM, splash screen, and SPL.
Click to expand...
Click to collapse
So,Is it ok that I flash stock rom via usb cable then uninstalled HSPL later and send the phone to service.
thanks.
atomical007 said:
So,Is it ok that I flash stock rom via usb cable then uninstalled HSPL later and send the phone to service.
thanks.
Click to expand...
Click to collapse
Yes you are fine to flash it via USB and then revert your HSPL back to SPL via the DFT HSPL utility. I just suggested flashing via SD card as it will do it all at one time leaving you with no need to manually revert your HSPL to SPL. Plus if you need to put SPL 3.10.0000 back on your HD2 this is the only way to do it as not even HSPL 4 has this SPL yet, HSPL 4 only goes up to SPL 3.03.0000.
T-Macgnolia said:
Yes you are fine to flash it via USB and then revert your HSPL back to SPL via the DFT HSPL utility. I just suggested flashing via SD card as it will do it all at one time leaving you with no need to manually revert your HSPL to SPL. Plus if you need to put SPL 3.10.0000 back on your HD2 this is the only way to do it as not even HSPL 4 has this SPL yet, HSPL 4 only goes up to SPL 3.03.0000.
Click to expand...
Click to collapse
Thanks for your help.I flashed via sd card and sent my phone to the service center.Let's see what will happens.Oh! The service agent said that it will take 2 to 4 days for repairing.
T-Macgnolia said:
Yes you are fine to flash it via USB and then revert your HSPL back to SPL via the DFT HSPL utility. I just suggested flashing via SD card as it will do it all at one time leaving you with no need to manually revert your HSPL to SPL. Plus if you need to put SPL 3.10.0000 back on your HD2 this is the only way to do it as not even HSPL 4 has this SPL yet, HSPL 4 only goes up to SPL 3.03.0000.
Click to expand...
Click to collapse
Spl. 3.10? Not.seen that one before, What rom is it from? Have I missed an update to the 3.14 rom?
samsamuel said:
Spl. 3.10? Not.seen that one before, What rom is it from? Have I missed an update to the 3.14 rom?
Click to expand...
Click to collapse
I got your PM and sent you one back on your question here.
For everyone else here. The latest SPL that is in the latest official update ROM for the TMOUS is SPL 3.10.0000. And HSPL 4 does not have this stock SPL included in it so flashing the ROM via SD card is the only way to get it right now.