Google Talk missing..... - G1 General

OK, so I am trying to get GTalk back installed after flashing a new ROM (Cyanogen 4.2.15).
I have searched and there seems to be no direct answer, possibly some inferred ones but noone has been able to answer or point me in the right direction. Hell, I got nicely ignored on Cyanogen's IRC channel. So, unless you are some sort of developer, that' a pretty useless avenue to ask questions it seems.
Here's the scoop:
I reflashed the CM ROM after properly preparing my SD card to make use of Apps2SD option. Gmail works, GMaps works, no GTalk.
Yes I am aware that the Google Apps had to be separated from CMs ROM but that seems only partially true as the other apps are all there.
Since there is a link to the suite of GApps (http://kanged.net/mirror/download.php?file=gapps-ds-ERE36B-signed.zip) does anyone know if one can simply 'apply any zip' and get the GTalk functionality back? I don't care if I have to resign into Google/Gmail again, just want GTalk to work.
Phone Info:
HTC Dream/G1
Firmware 1.6
Radio 2.22.19.26i
CyanogenMod 4.2.15.1
Nandroid
Stock CM theme
8GB Class 4 MicroSD car (partitioned 4GB/4GB....yeah, it's goo big of an app partition, toying with resizing it instead of blowing it all away.)

JadedTech said:
OK, so I am trying to get GTalk back installed after flashing a new ROM (Cyanogen 4.2.15).
I have searched and there seems to be no direct answer, possibly some inferred ones but noone has been able to answer or point me in the right direction. Hell, I got nicely ignored on Cyanogen's IRC channel. So, unless you are some sort of developer, that' a pretty useless avenue to ask questions it seems.
Here's the scoop:
I reflashed the CM ROM after properly preparing my SD card to make use of Apps2SD option. Gmail works, GMaps works, no GTalk.
Yes I am aware that the Google Apps had to be separated from CMs ROM but that seems only partially true as the other apps are all there.
Since there is a link to the suite of GApps (http://kanged.net/mirror/download.php?file=gapps-ds-ERE36B-signed.zip) does anyone know if one can simply 'apply any zip' and get the GTalk functionality back? I don't care if I have to resign into Google/Gmail again, just want GTalk to work.
Phone Info:
HTC Dream/G1
Firmware 1.6
Radio 2.22.19.26i
CyanogenMod 4.2.15.1
Nandroid
Stock CM theme
8GB Class 4 MicroSD car (partitioned 4GB/4GB....yeah, it's goo big of an app partition, toying with resizing it instead of blowing it all away.)
Click to expand...
Click to collapse
you should be able to flash gapps and get it back but you can unzip that and grab gtalk and push it back using adb

supremeteam256 said:
you should be able to flash gapps and get it back but you can unzip that and grab gtalk and push it back using adb
Click to expand...
Click to collapse
When you say 'push' to you mean 'adb push' or 'adb install'. Just wanted to be clear as the install doesn't work.
"Failure [INSTALL_FAILED_OLDER_SDK]"
I get that when I tried to install. My understanding is that there is a mis-match in the adb I am using and the ROM that is on the phone. Is there a way to fix this?

If you are only using CM4 then you need to wipe, defanged base (all of the google apps), then flash CM4.
You shouldn't be flashing gapps. That is for CM5
-------------------------------------
Sent via the XDA Tapatalk App

Oh yeah dont flash gapps. That is for CM5.
-------------------------------------
Sent via the XDA Tapatalk App

And so my learning continues....
So, by copying the zip file to the SD card and choosing 'apply any zip', it seems that everyone is calling that 'flashing'?
Now here's the issue. I already flashed CM 4.2.15.1 and there was no GTalk included.
FYI, for people like me learning, a little more explanation goes a long way. Good thing I'm one of those types who knows how to use Google as opposed to the types who get pissed by people who just use terms and assumes everyone knows them....
So through my wanderings I found this link:
http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_G1/Dream_Firmware_to_CyanogenMod
Which led me to here
http://wiki.cyanogenmod.com/index.php/DangerSPL_and_CM_5_for_Dream
Just did a nandroid backup, about to copy stuff from SD card and then upgrade to CM 5/Gapps!
Wsh me luck!

SUCCESS! CM 5.0.7 installed!!

And GTalk works
Thanks all involved with making these things possible!

Related

[Workaround] Froyo- Workarounds for Common Problems- READ HERE FIRST!!

So, as Froyo is slowly becoming the standard around here, I thought I would post a few workarounds for some of the problems that people are having with Froyo and the wide selections of Froyo ROMS to choose from. I put this list together, as these problems I see coming up in many of the Froyo ROM threads.
So, I ll start with a few of the most common ones, and will add to this list later.
Issue -My apps are appearing twice in the ADW apps launcher after moving them to the SD card! (Froyo apps2sd)
Workaround-It seems almost everytime I reboot the phone that Im getting the apps appearing twice. If you uninstall ADW, and then reinstall it, then it stops. So what I ve done for the time being is to install ADW new, get all the widgets and apps you want on the home screen, and then go into the restore and backup settings in ADW launcher. Make a backup of your ADW settings and of your homescreens and save those to your sd card (it does this automatically). Then, the next time you need to reboot your phone and you see double apps coming up, just go into ADW settings and "Restore" your settings for the launcher and homescreens. Then the double apps go away, your settings are retained, and your apps and widgets are back on your homescreen.
If your using the same apps and widgets all the time, its probably a good idea to do a Nandroid after you ve done this, and to save the 2 ADW save files stored on your sd card just in case you ever want to quickly restore your settings again.
Issue- Froyo apps2sd is rubbish! I only have 40mb left on internal storage! I want the old apps2sd back!!
Workaround- First off, I have to admit that at first I didn’t like the new Froyo apps2sd. But actually now, I like it more, due to the fact that you don’t need an EXT or swap (meaning MORE SPEED), AND coupled with the fact theres a very easy way to get FOUR TIMES MORE STORAGE than the 40mb (estimate for 115 apps) that you have left. The solution? Easy..all you have to do is go into your ROMS settings, and “move dalvik to cache”. To put it simply, I have 117 apps installed on my phone. After I moved them all to the sd card, I had 40mb left. I then went into the spare parts on Emonthers ROM, and enabled “dalvik on cache”. I then rebooted, and VOILA…137mb free internal space.
I cant confirm that all ROMS have this option, but if your ROM does have it, it’s the way to go. From what I ve read (please correct me if im wrong), this space is allocated mostly for OTA updates. As most of us here have root, why not use that space to free up some internal memory! After doing this, my phone is running VERY fast and smooth.
Issue- My phone keeps rebooting at the load screen! HELP!!
Workaround -This commonly occurs if you didn’t wipe properly when coming from another ROM. If this is happening to you, you ll need to:
Pull your battery to get the loops to stop
Reboot into recovery
Do a full wipe, then if you have an ext partition wipe that. Also wipe cache and dalvik settings. This is very important. Then flash your ROM. Your Bootloops should then stop. And remember, if your partioning your card, remember to REPAIR EXT PARTITIONS. This is VERY important and will save you lots of grief.
Issue- When I record video my phone reboots! HELP!
Workaround- This means you haven’t installed the Froyo radio. You ll need to be sure you have either flashed the zip version of the Froyo radio or installed the image (Cyan says installing the image is safer. Im sure hes probably right, but I can confirm I have flashed the zip version of the radio and it works fine).
Issue-I don’t know which apps to install to the sd card and which I should leave on the phone! AAARRGGHH!
Workaround- From what I have read, what you ll want to leave on the phone are:
Widgets, apps that have widgets that you use, keyboards, and system apps. I also keep my sms app on the phone, although Im sure it will work fine on the SD card.
Issue- I just flashed a new ROM, and now the app launcher is all slow! Whats up with that??
Workaround- This is most likely because your apps are being automatically redownloaded and installed. This is a feature of Android that was added to Eclaire that allows Google (with your permission) to backup your settings (apps, wifi key, ect). Give the phone a minute and you ll see in your app launcher that your apps are being added automatically! When its done, you ll get a notification that says “ “X” number of apps reinstalled. Saves you time and work, and now your launcher will stop lagging.
Issue- There are so many Froyo ROMS! Which one is the best one!??!
Workaround- This is like asking if basketball is cooler than football. In short: it’s a matter of opinion. I can however share my findings so far.
Cyan6- We all know the quality of Cyan and TeamDouches work. When there ROMS go stable, they..well…they JUST WORK GREAT. Cyans ROMS are always very detailed and COMPLETE (trackball lights, wallpapers, advanced options) Right now, for me the ROM is still very buggy, so I would give it the number 3 spot.
RoDrIgUeZsTyLe- If you like overclocking and speed, this ROM is a winner! His ROMS have a lot of kernel options and overclocking enhancements, and are fairly stable. Very recommended.
Enomther- At this very moment, this ROM takes the cake and is easily my number 1 pick. Stable, fast, TONS of enhanced features and extra settings, and I can honestly say I haven’t had one FC yet. I can understand why hes one of the top dogs here. His newest ROM has been an AWESOME Froyo experience for me, and I ll be sticking with him until Cyan goes stable.
PLEASE NOTE THAT THERE ARE MANY OTHER FROYO ROMS. THESE ARE JUST THE ONES THAT I HAD THE BEST EXPERIENCES WITH. YOUR PERSONAL EXPERIENCE MAY VARY!! THE DEVS HERE ALL DO GREAT WORK, AND THIS IS BY NO MEANS SAYING THAT ONE IS BETTER THAN THE OTHER!
Anyway, that’s all I have for now. I hope this helps out, and I ll be adding to this thread as more common problems come to me. I hope it helps someone out, and I really hope it saves our awesome devs some time from answering questions. After all, it takes time creating all the awesomeness that they bring!
**Reserved for future issues**
great job dude thanks a lot for sharing your knowledge
How about the market not installing apps? I keep trying with CMRC1 and it downloads the app just fine but stalls on the installation
PhantomRampage said:
How about the market not installing apps? I keep trying with CMRC1 and it downloads the app just fine but stalls on the installation
Click to expand...
Click to collapse
Ok, that's a new one for me. So you can download the app, but can't install it? Are you having his problem on wifi and 3g?
PhantomRampage said:
How about the market not installing apps? I keep trying with CMRC1 and it downloads the app just fine but stalls on the installation
Click to expand...
Click to collapse
Ok, that's a new one for me. So you can download the app, but can't install it? Are you having his problem on wifi and 3g?
EDIT- have a look on your SD card.is there a folder called " android secure"?
Just checked and yeah there is, it's hidden though (.android_secure)
Is this what's giving me trouble?
PhantomRampage said:
Just checked and yeah there is, it's hidden though (.android_secure)
Is this what's giving me trouble?
Click to expand...
Click to collapse
Quite possibly yes. Try deleting that folder, rebooting, and then try to install. Make sure the folder doesnt reappear after reboot. If it does, try just deleting it and then downloading and installing an app.
Also, be sure to let me know if it works, so that I can add it to the thread.
thank you for the information. I would suggest that you try Leo Froyo. Very stable and full of options.
PhantomRampage said:
How about the market not installing apps? I keep trying with CMRC1 and it downloads the app just fine but stalls on the installation
Click to expand...
Click to collapse
i have the same problem... even if i delete che android_secure folder
*delete*
wrong post. Sorry.
Dai323 said:
Quite possibly yes. Try deleting that folder, rebooting, and then try to install. Make sure the folder doesnt reappear after reboot. If it does, try just deleting it and then downloading and installing an app.
Also, be sure to let me know if it works, so that I can add it to the thread.
Click to expand...
Click to collapse
no the .android_secure folder is where apps2sd for froyo go....
flybyme said:
no the .android_secure folder is where apps2sd for froyo go....
Click to expand...
Click to collapse
Are u using the old apps2sd or the new? I read in another thread that deleting this folder was allowing some to download apps after deleting it. I personally haven't had his problem, but ill search around to see if I can find a workaround.
Download this file here and make sure it doesn't have .txt as file ext, but .xml instead. Rename if necessary.
http://forum.xda-developers.com/showpost.php?p=6602402&postcount=8
Then follow this instruction.
http://forum.xda-developers.com/showpost.php?p=7046487&postcount=29
If it doesn't work, you most likely don't have the shared_prefs folder. So just create one.
Hope it helps. Good luck.
PhantomRampage said:
How about the market not installing apps? I keep trying with CMRC1 and it downloads the app just fine but stalls on the installation
Click to expand...
Click to collapse
Dai323 said:
Are u using the old apps2sd or the new? I read in another thread that deleting this folder was allowing some to download apps after deleting it. I personally haven't had his problem, but ill search around to see if I can find a workaround.
Click to expand...
Click to collapse
apps2sd for froyo as in the built in implementation of apps2sd native to it. its not apps2ext
hook up the sd to your pc and have a look inside youll see your apps lol
flybyme said:
apps2sd for froyo as in the built in implementation of apps2sd native to it. its not apps2ext
hook up the sd to your pc and have a look inside youll see your apps lol
Click to expand...
Click to collapse
LOL. Yes, I know what the new Froyo apps to sd is I asked because in many of the Froyo ROMS you have the possibility to choose between the new implemented from Google apps2sd or the old style apps2sd that we seen in builds prior to Froyo.
Have you given rjhay22's suggestion a try? Please let me know if it fixes so that I can get it added to the original post.
Moved too general area
Love the concept of this thread
Mikey1022 said:
Moved too general area
Love the concept of this thread
Click to expand...
Click to collapse
Thanks Im just hoping we can save the devs some time. I ll keep adding to it the more and more we find solutions.
Never seen any of these problems... Apps2SD is okay, just more apps need to support it.. I have 4-5 5M+ apps which don't, and it'd help a lot if they did. I'm sitting around 30M free after clearing browser cache with a ton of apps installed on my stock OTA.
khaytsus said:
Never seen any of these problems... Apps2SD is okay, just more apps need to support it.. I have 4-5 5M+ apps which don't, and it'd help a lot if they did. I'm sitting around 30M free after clearing browser cache with a ton of apps installed on my stock OTA.
Click to expand...
Click to collapse
well if you have the mod install location app you can force the option to allow apps to be moved to SD
@Dai323
haha sorry i was using froyo apps to sd. I dont think it makes any difference whether that folder is there or not unless something is entirely screwed up with a rom flash.
ive read that the solution rjahays solution will work for enomthers for sure as well as modacos rom

New GAPPS 12/18 (credit to jaybob413)

EDIT: THREAD OUTDATED, NO LONGER NEEDED
UPDATE: See post #5 - auto update market 2.2.7 !
Hello all, I am posting this so that people can have the newest FULL gapps package: market, maps, gmail, facebook, nav, etc, etc - this is not the tiny gapps 1213 that AOSP built, those can be found here or here. Jaybob413 created the zip for his rom - which is awesome - and I take no credit for either the rom or the gapps. All credit goes to jaybob413. These gapps are from his rom, which is CM6.1+, and they work on his rom. Since they are CM6.1+ they should in theory work for all CM6.1+ sourced roms, but I have not tested them on anything else. I do not intend to answer any questions, I am not a dev, and you should not ask him questions either, there is a Q+A section for that if you can't find help here. I am merely posting this to reduce all of the silly "where is the market?" and "how do I get the new maps?" threads that are currently clogging the boards. This is a flashable zip in recovery, and will of course overwrite your current gapps. The first link below is to jaybob413's rom thread OP so you can read it. The second link below is to jaybob413's mediafire account, so you can download the gapps (the old 1020 gapps are there too if you prefer). Good day.
http://forum.xda-developers.com/showthread.php?t=731659
http://www.mediafire.com/JB_CM6_ROMS
If anybody is getting "unknown error 18" after trying to install apps, I think I finally found out how to fix it. It seems to be for apps that have the ability to install to SD, even if you are trying to install them to internal. If you simply unmount your sd card in settings (and for some it worked when they ALSO deleted the file .android-secure from the sd with root explorer, I didn't have to) - yes I said unmount - you should be able to install whatever you want. It looks like it's a google issue and they're working on it.
If I flash this package on my phone, will it overwrite my currents gapps?
coppertop4646 said:
If I flash this package on my phone, will it overwrite my currents gapps?
Click to expand...
Click to collapse
Well of course, that's the point thanks for the question, it reminded me to edit the OP to answer this.
New info !!! The newest market is now 2.2.7, which many of you may know. If you go to a sprint stock rom (like nfx most recent), and update your profile and prl(also new as of 12/20) you will get an auto update from 2.2.6 to the newest 2.2.7 market !!!
so if i flash nfx sprint rom, install new market and prl/profile updates, nand back to cm6.1, will it keep all the new market and prl updates?
garbonzo134 said:
so if i flash nfx sprint rom, install new market and prl/profile updates, nand back to cm6.1, will it keep all the new market and prl updates?
Click to expand...
Click to collapse
yes it will keep, and the market is an auto update, nothing you have to do yourself there sorry for the delay, haven't been on here for a few days.
If I flash this then take off the old gapps from my sdcard will everything still be on my phone?
Sent from my HERO200 using XDA App
MSK01 said:
If I flash this then take off the old gapps from my sdcard will everything still be on my phone?
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
If you flash this it will overwrite the old gapps, so you can delete the old 1020 gapps zip. Once you flash any zip in recovery it doesn't need the zip file to function after that because it's in the phone's system.
Thead closed by OP's request.

Android Market?

I just finished reading an article on Eweek that indicates that access to the android market in mow available for computers http://market.android.com/....
I don't know if it is only supported on Honeycomb, but I can't wait to get home and try it...
here is the Eweek article also:
http://www.eweek.com/c/a/Mobile-and...comb-on-Xoom-Wows-Crowd-at-Googleplex-866135/
I shared your excitement but as I'm sure you discovered, it still does work! You need to log in with a Google ID, but when you do, it tells you that there is no Android phone associated with your account.
I don't have an Android phone but I wonder if I did have one and registered it, would the A7 then be able to access the Market?
Really, Google has made the situation worse because now I can see all the great apps in the Market but can't access them! There more bliss in the ignorance when I couldn't see the apps at all!
Dexter mod
Install the Dexter mod and you will have access to the market
try the slideme market just search for slideme in google
kingjf54 said:
Install the Dexter mod and you will have access to the market
Click to expand...
Click to collapse
Unfortunately, I updated to the Feb 4 firmware 1 day before I learned of of this...so now I wait!
I went to market.android.com on my device. Signed in with my Google Apps account, the same one I used to sign into Google Apps services on my A7. It shows everything I have downloaded using Dexters mod marketplace in it's history or whatever it's called. Also, I can choose install on any non installed app and immediately the app downloads to the A7. I didn't get any messages about the device not being registered. it just seems to work. I am in Canada as that may make a difference.
Joe
JohnnyG_TO said:
Unfortunately, I updated to the Feb 4 firmware 1 day before I learned of of this...so now I wait!
Click to expand...
Click to collapse
You can still use Dexter's MOD, you'll just need to do a back up and wipe/reset the device before updating.
Is there another way to get android without Dexer's Mod? My sister is getting one of these and I want to install the Market on it for her but I don't want her to have root (If it were mine it would be a different story). There should be some way to install the market and associated services to run it with an APK file without needing to root it, like my Archos 70.
kingjf54 said:
Install the Dexter mod and you will have access to the market
Click to expand...
Click to collapse
Tried it couldn't get to work. Followed all the advice and still won't work for me and I get the same error message as the other poster.
Google market for Tablet with Os 2.2
marcusmarcus said:
Is there another way to get android without Dexer's Mod? My sister is getting one of these and I want to install the Market on it for her but I don't want her to have root (If it were mine it would be a different story). There should be some way to install the market and associated services to run it with an APK file without needing to root it, like my Archos 70.
Click to expand...
Click to collapse
Borrow a friends Android phone, turn on its Bluetooth.
Turn on your tabs Bluetooth,pair them, use a file transfer program on his phone,download market on his phone when done tranfer it to your pad.A friend of mine did it and it works on on the free apps so far.You should then sign up with google account,before trying to get apps.
alcassetta said:
Borrow a friends Android phone, turn on its Bluetooth.
Turn on your tabs Bluetooth,pair them, use a file transfer program on his phone,download market on his phone when done tranfer it to your pad.A friend of mine did it and it works on on the free apps so far.You should then sign up with google account,before trying to get apps.
Click to expand...
Click to collapse
Where do you download the Market from? Can you give a more detailed step-by-step?
JohnnyG_TO said:
I shared your excitement but as I'm sure you discovered, it still does work! You need to log in with a Google ID, but when you do, it tells you that there is no Android phone associated with your account.
I don't have an Android phone but I wonder if I did have one and registered it, would the A7 then be able to access the Market?
Really, Google has made the situation worse because now I can see all the great apps in the Market but can't access them! There more bliss in the ignorance when I couldn't see the apps at all!
Click to expand...
Click to collapse
I have a android phone with the market and dexter 1.3 on my a7 when I go to the market on the computer it gives me the choice to sent apps to my a7 or to my phone. I have my a7 on and on the internet. It will send the app directly to the a7.
A few issues
Hi,
#1 - I can't find Dexter anywhere.
#2 - My A7 will pair, but not connect with anything.
Any thoughts??
Djankiew said:
Hi,
#1 - I can't find Dexter anywhere.
#2 - My A7 will pair, but not connect with anything.
Any thoughts??
Click to expand...
Click to collapse
I have a Epic 4 g and the A7, same problem, Pair but No Connect.
alcassetta said:
Borrow a friends Android phone, turn on its Bluetooth.
Turn on your tabs Bluetooth,pair them, use a file transfer program on his phone,download market on his phone when done tranfer it to your pad.A friend of mine did it and it works on on the free apps so far.You should then sign up with google account,before trying to get apps.
Click to expand...
Click to collapse
I just downloaded the latest Android Market apk file and tried this. It installs, but the app does not run. It just will not open. Sounded like a great idea!
Google Market
Djankiew said:
Hi,
#1 - I can't find Dexter anywhere.
#2 - My A7 will pair, but not connect with anything.
Any thoughts??
Click to expand...
Click to collapse
Here is the link to Dexters Mod: http://forum.xda-developers.com/showthread.php?t=890042
Here is the link to Bestialbub gapps Mod: http://forum.xda-developers.com/showthread.php?t=1019846
These are two different ways that will give you access to the app market, Please read everything before attempting to flash this.
smallba said:
Here is the link to Dexters Mod: http://forum.xda-developers.com/showthread.php?t=890042
Here is the link to Bestialbub gapps Mod: http://forum.xda-developers.com/showthread.php?t=1019846
These are two different ways that will give you access to the app market, Please read everything before attempting to flash this.
Click to expand...
Click to collapse
I have a dumb question! The mod by Bestialbub (What a name!) looks pretty simple, and it is what I am leaning towards. I really like my A7 and do not want to mess with it too much. I may even just decide to wait to see if Elocity comes out with an official patch. I just flashed my unit to the newest firmware. Do I need to do this again, as stated in the first part of the directions, or can I just boot into the recovery mode and flash using the file that I download? Also, what is the risk for doing this? Have many of you ran into issues with it? Thanks!
my market patch works fine w the latest update. check out my twitter under the same name for updated recoveries that will let you backup your rom, flash my mod, and restore back to where you were if you dont like it.
my mods a small one that can be applied anytime over the existing firmware. a factory reset should be done after that will wipe your data and let the google apps install properly on next rom boot.
i would suggest to wipe/factory reset w my clockworkmod recovery (on my twitter) as it should leave your internal storage partition w your media downloads alone. note; i havent actually tried that suggestion (reset) from cwm, but it sounds like a good idea.
Sent from my X10i using Tapatalk
Just did the update...no market!
bestialbub said:
my market patch works fine w the latest update. check out my twitter under the same name for updated recoveries that will let you backup your rom, flash my mod, and restore back to where you were if you dont like it.
my mods a small one that can be applied anytime over the existing firmware. a factory reset should be done after that will wipe your data and let the google apps install properly on next rom boot.
i would suggest to wipe/factory reset w my clockworkmod recovery (on my twitter) as it should leave your internal storage partition w your media downloads alone. note; i havent actually tried that suggestion (reset) from cwm, but it sounds like a good idea.
Sent from my X10i using Tapatalk
Click to expand...
Click to collapse
I just ran this update, and followed the instructions to the letter. Everything seemed to go well, however, when the device rebooted, I see no Market link. What did I do wrong?
Never mind! I figured it out. The update.zip file I had on my sdcard was the elocity firmware file. I copied the patch to the wrong spot!! DOH!!!.;p).
Alas, Woe is me.
I went and loaded things (wallpapers, eBooks, games, etc.) onto my A7.... then I find this forum!
Is there an easy way (perhaps with a free, non-Marketplace, app) to back up all of this onto an SD card (or even a USB flash drive) and then re-install it after installing one of these mods?
I'm sure I could copy everything over individually, but there's got to be an easier way....is there?

[ROM][2.1] Eclair Strikes Back v2 [2011.06.23]

Since there's been some interest in comparing the 2.2 ROMs with the 2.1, here are some stock eclair nandroid images based on the Cincinnati Bell 2.1 ROM that can be used in OpenRecovery without flashing SBFs. You can use these to switch between 2.1 and other 2.2 ROMs without bothering with RSD Lite/sbf_flash.
Of course gallery key, camera and FM radio work well on these. Although, I've been having market problems (paid apps fail to download). Hopefully that will resolve itself if/when market decides to self-update... In the interim, I recommend using something like Titanium Backup to migrate your paid apps.
Eclair Strikes Back v2 (2011.06.23)
This is a tweaked version of CBW_eclair_STR_U2_04_1E_1.zip with some tricks we've been using in 2.2 (expanded apns-conf.xml, JIT from FrozenEclair, memhack to move dalvik-cache to /cache, egl.cfg hack to disable software rendering).
eclair-strikes-back-v2-beta.zip (the beta is now final )
Changes since v1:
ext-partition support compatible with the stock221-derived ROMs*
Automatic swap support for fjfalcon's fastboot kernel
Automatic support for link2sd (either FAT extra partition or stock221's /sd-ext/link2sd method)
Additional cpu governors (conservative, interactive)
Market upgraded to 2.2.7
*dalvik-cache on /sd-ext is not supported by default on this ROM.
Previous release: Eclair Strikes Back v1
eclair-strikes-back.zip
2011-06-16 Update to fix market on ESB v1 (upgrades market to 2.2.7)
Stock 2.1 (Cincinnati Bell)
This is a rooted version of Cincinnati Bell's STR_U2_04.1E.1 with OpenRecovery support pre-installed.
CBW_eclair_STR_U2_04_1E_1.zip
Hey Mioze do you have the app2ext script that is in the Bluesteel rom? Might try your eclair nands with it and see what i get.
I've finally successfully downloaded and installed a paid app from the market now on Eclair Strikes Back. Market is still old one though... not sure why it's taking so long to update to new one. When I did a factory reset on stock 2.1 soon after I bought the phone the market updated itself pretty quickly IIRC.
Still, this feels so smooth and fast....
EDIT:
And don't seem to be having downloading issues with any apps, be it paid or free anymore. Maybe you'll have to manually replace the market.apk with the new one though, since I'm not sure it's ever going to self-update.
syrenz said:
I've finally successfully downloaded and installed a paid app from the market now on Eclair Strikes Back. Market is still old one though... not sure why it's taking so long to update to new one. When I did a factory reset on stock 2.1 soon after I bought the phone the market updated itself pretty quickly IIRC.
Still, this feels so smooth and fast....
EDIT:
And don't seem to be having downloading issues with any apps, be it paid or free anymore. Maybe you'll have to manually replace the market.apk with the new one though, since I'm not sure it's ever going to self-update.
Click to expand...
Click to collapse
And what about moving applications to the sd? available or will be applied app2sd?. Open recovery will still work? I have some applications that are supported only from 2.2, they can no longer be installed .... of course there will have to sacrifice something.
I at the continuing problems of delay in opening and closing apps, malfunction of the camera, out of trouble and delay an application to load the launcher and would return to around 2.1, but I also like the space for application installation and open recovery.
PS: It's easy to return to 2.1?
download on process
kinda miss the haptic feedback hahaha..
thx a lot Mioze..
I'm pretty sure you can only move apps to SD for 2.2... since I never used it (I never have so many apps installed at once that it's neccesary) I don't mind losing that functionality.
There are a few apps from 2.2 that I like, most notably the new gmail and youtube apps, but those are minor sacrifices for me really.
Open recovery is installed in both those links. I find the camera works much better on 2.1, seems much faster in taking and processing pictures.
In any case, it is indeed very easy to return to 2.1 and then return back to a 2.2 ROM if you don't like it. You take one of those links (I'm using eclair strikes back) and flash it through nandroid just as you would any other ROM that we have here. And you can flash back the same way if you don't like it.
Be advised, there are currently some issues around the android market for some reason (just see the posts above)... I'm thinking we might have to replace the market apk.
Anyways, I personally am loving it.
EDIT:
Oh, you might have to setup the APN's as well.
Tavinsky said:
And what about moving applications to the sd? available or will be applied app2sd?. Open recovery will still work? I have some applications that are supported only from 2.2, they can no longer be installed .... of course there will have to sacrifice something.
I at the continuing problems of delay in opening and closing apps, malfunction of the camera, out of trouble and delay an application to load the launcher and would return to around 2.1, but I also like the space for application installation and open recovery.
PS: It's easy to return to 2.1?
Click to expand...
Click to collapse
I intend to make an updated eclair-strikes-back to add app2ext support and additional governors but I probably won't have time until later in the week. I view link2sd as the eclair equivalent of froyo's native app2sd, though. Link2sd may already work with fat as the second partition, but I haven't tested it yet because of the market problem. The market problem is #1 on my list when I get time.
And yes, these 2.1 ROMs will keep OpenRecovery intact and you can just flash between 2.1 and 2.2 ROMs the same way you would switch between 2.2 ROMs.
Thanks for the work Mioze7Ae! Let's try it, you know, always gives a bit of fear making a mistake, but gradually removes the fear. I do not know that flashing. It's like applying an Update? I apply a copy nandroid?
Tavinsky said:
Thanks for the work Mioze7Ae! Let's try it, you know, always gives a bit of fear making a mistake, but gradually removes the fear. I do not know that flashing. It's like applying an Update? I apply a copy nandroid?
Click to expand...
Click to collapse
I know how you feel. I always used to have fear/apprehension when flashing a ROM. I've done it enough times now that it's all gone by now though.
Anyways:
Download the ROM. Unzip it. Copy and paste the folder (should contain 4 things in it boot.img etc...) into your SD card under OpenRecovery/Nandroid/ (if you've gone to a 2.2 ROM you should see that ROM in the same place where you're putting this). Anyways, launch open recovery and do recovery boot or hold volume up while pressing power on (if your phone is off). If you get an image and nothing happens, you may have to go into open recovery and select install recovery system before doing this - if you have a bunch of weird pictures in your gallery including Darth Maul then you don't have to worry about this. Then navigate - using the volume keys to move up and down and the camera button to select - to Nandroid, select restore, select Eclair strikes back, select restore all. Once that's done, make sure to wipe data/factory reset and then wipe/clear dalvik cache and cache. Then reboot and it should work. (First reboots are long).
You may have to setup your APN's also.
Excellent. Thanks, sounds simple ... downloading ..... then tell how it worked.
syrenz said:
it boot.img etc...) into your SD card under OpenRecovery/Nandroid/ (if you've
Click to expand...
Click to collapse
They actually go in nandroid/openrecovery/, it's the updates.zip that go in OpenRecovery/updates/ so it's easy to remember that wrong. I'm always adb push'ing to them so I only noticed the mistake because I've got the muscle memory from typing them all the time. Gotta love the consistency
hey mioze7ae, using it right now btw, is it possible to change the read_ahead settings to 2048 instead of 128? i can manually replace the file but once reboot, it changes back.
thanks!
Manual market update
I replaced /system/app/Vending.apk with the 2.2.7 com.android.vending.apk found here:
http://forum.xda-developers.com/showthread.php?t=875067
After doing this and rebuilding dalvik-cache I have the new market and I am able to install paid apps! I'll make an update for it tomorrow, I have to crash.
Two things you can get from market before you flash. APN backup/ restore and SD speed Increase. You can backup your APNs and then once you get to the eclairs, restore them. SD Speed Increase will kick up your SD cache to 2048, instead of 128. Both are free.
Woodrube said:
Two things you can get from market before you flash. APN backup/ restore
Click to expand...
Click to collapse
Much appreciated... Didn't know there was such an app and it's a pain to re-enter all that stuff...
syrenz said:
I know how you feel. I always used to have fear/apprehension when flashing a ROM. I've done it enough times now that it's all gone by now though.
Anyways:
Download the ROM. Unzip it. Copy and paste the folder (should contain 4 things in it boot.img etc...) into your SD card under OpenRecovery/Nandroid/ (if you've gone to a 2.2 ROM you should see that ROM in the same place where you're putting this). Anyways, launch open recovery and do recovery boot or hold volume up while pressing power on (if your phone is off). If you get an image and nothing happens, you may have to go into open recovery and select install recovery system before doing this - if you have a bunch of weird pictures in your gallery including Darth Maul then you don't have to worry about this. Then navigate - using the volume keys to move up and down and the camera button to select - to Nandroid, select restore, select Eclair strikes back, select restore all. Once that's done, make sure to wipe data/factory reset and then wipe/clear dalvik cache and cache. Then reboot and it should work. (First reboots are long).
You may have to setup your APN's also.
Click to expand...
Click to collapse
I just want to check; is it completely safe to remove those wierd pics in the gallery?
androidlover123 said:
I just want to check; is it completely safe to remove those wierd pics in the gallery?
Click to expand...
Click to collapse
Yes. But if you have to use open recovery for whatever reason, you'll need them. You can either click install recovery as needed (which creates the pics) and delete them after, or the best thing to do is get an app that just hides the pics from gallery - so they are there when you need them, but don't interfere. I saw an app "Gallery Excluder" or something floating around in the XDA Android Apps section - that would work. Or a gallery like QuickPic let's you hide things as well.
EDIT:
Nevermind, Gallery Excluder hides folders only. There are other apps though, I believe.
Just an update on progress with ESB
I've done some testing and Link2SD already works with the released eclair-strikes-back but currently only when using FAT for the second partition.
To get ext support in, I'm trying to get the darktremor a2sd scripts to work. They look high quality and robust and should handle swap gracefully when booting the custom kernel as well (current status--some rare hung boots with a flaky SD card when using the latest beta scripts, will try the stable release next). There's also a GUI in the market for managing the SD card (currently only Froyo+, I'm inquiring whether the developer can add eclair support).
Mioze7Ae said:
Just an update on progress with ESB
I've done some testing and Link2SD already works with the released eclair-strikes-back but currently only when using FAT for the second partition.
To get ext support in, I'm trying to get the darktremor a2sd scripts to work. They look high quality and robust and should handle swap gracefully when booting the custom kernel as well (current status--some rare hung boots with a flaky SD card when using the latest beta scripts, will try the stable release next). There's also a GUI in the market for managing the SD card (currently only Froyo+, I'm inquiring whether the developer can add eclair support).
Click to expand...
Click to collapse
I am hoping that the ext will come through. If I am using the sd-ext/app folder on the Steelblue ROM, can I leave all my apps in there and flash your eclair with ext support (when ready) or will I have to use Titanium-migrate? I would think that it really wouldn't matter for most of the apps, except FroYo specific ones like Flash 10.3 but not sure.
p.s. Are you going to call your next version "Return of the Eclair"?
MD5 Check failed. Does this have something to do with the fact that I bought my phone in the middle east?

My kindle fire HDX 7" setup, for newbies!

First of all, thanks a lot to Cpasjuste for making the working gapps flashble zip, here's a link to that. I take no responsibility for doing this, all credit goes to Cpasjuste. Also I do not know a lot about deving myself but i've had two android devices before this and have been avid in modding them, just thought i'd put that out there.
So, first thing I did was get root, factory reset and get safestrap recovery. then I made a backup of my stock ROM, kept it on my kindle, and moved it to a safe spot in my computer (I recommend everyone does this, no matter if they choose to follow this setup or not.) I created a new ROM slot with default partitions, and restored my stock ROM to it (you do this in case any thing happens you have your stock ROM to fall back on). I tried flashing Cpasjuste's gapps rom, but for some reason there were multiple issues with it so instead, i restored to stock, on ROM slot 1, and flashed his gapps zip mentioned earlier. Rebooted and everything (well almost everything) worked perfectly. playstore works and only app that I have discovered to be incompatible is instagram for some reason, but i found a apk download online that installed perfectly to replace it. I installed a app from play store called recent apps quick button, which basically activates android's recent apps, then I installed a app from play store called Home2 shortcut. this lets me assign the resent apps quick button to double tapping the home button so now when i double tap the home button it brings me to recent apps. It's really nice since kindles default Rom doesn't have a recent apps button! Right now I am working on blocking updates from amazon to prevent losing root or bricking, using the tutorial found at the end of the root link. Let me know what you guys have done to make your kindle fire HDX experince better, or any questions you have.
Also, I forgot to mention that using the gapps flashable zip broke my amazon appstore and most amazon services, except video it seams like, but since we have safestrap recovery this isn't a big deal to me because i can always get it back, and im sure it will be fixed in future. Have fun and be safe while experimenting with your kindle.
I TAKE NO RESPONSIBILITY FOR DAMAGE DONE TO YOUR DEVICE, KNOW WHAT YOUR DOING BEFORE YOU DO IT!!!!!!!
Ah! Thats what I missed, I didnt realise I could use restore on a different ROM slot! Thanks for that, going to try it later!:good:
OurFriendIrony said:
Ah! Thats what I missed, I didnt realise I could use restore on a different ROM slot! Thanks for that, going to try it later!:good:
Click to expand...
Click to collapse
No problem! Also if I were you I would delete most of the user apps on your stock ROM, Idk if you did what I said and factory reset before you got safestrap (I would not try it if you already safestrap since you will lose safestrap and possible break you device!) but if you didnt I would just go back and delete most user apps and data off stock ROM and then redo the backup and restore with that. because you most likely wont be using the stock ROM (you don't want to alter it since you want to have a safe spot to restore to) you want it to take up as little storage as possible. My advice, pretend that you don't have root and don't do anything with it, like editing parts of system, or flashing mod packages, etc... (only exception is having super user and safe strap app installed.) Let me know if any part of this was to confusing. Hope this helped!
Haha, I saw your reply about 2 minutes after starting up the factory rest. I can, however, confirm that safestrap is still installed between the boot and IS load, so I'm actually in a perfect position. Have taken a new backup of pure stock rom!
Happy days!
I got a copy of my Stock ROM installed into ROM slot 1 and then added the gapps package, it worked beautifully!
I now have a tablet with all the google features on and have no issues so far.
except...
when I boot to ROM slot 1, I get a message saying "Kindle is Updating/Upgrading". It doesn't do anything and it only takes a few seconds before it gives up. I was just wondering if there was a way of getting rid of this??
As someone who hasn't had any prior experience with Android (although a fair share of experience with GNU/Linux), I appreciate a thread like this.
I also rooted the device (works well from GNU/Linux), installed SuperSU and some essential apps to make the stock OS usable (busybox and a terminal emulator, of course; and also a lightweight file browser that doesn't take much space and does exactly that, lets me browse local files). Then installed SafeStrap and backed everything up to both the Kindle and the PC (the backup is accessible via MTP, in the internal storage, so you can just connect the USB cable and copy the TWRP directory – at least in KDE).
Now I'm going to try the new AOSP ROM. Though since I'm new to the whole Android business, the partition sizes have me a bit confused. I'd want to have three slots – the stock ROM (obviously), the stock FireOS (one that I can modify) and AOSP. What partition sizes for the two slots would be the best, if it's the 16GB HDX? Also, say I download a PDF file; would both FireOS and AOSP see the file if I put it in internal storage, or would I have to manually copy it over to the other slot through my PC?
@GreatEmerald, whats AOSP? I'm thinking of playing around a bit more. I want to try out some more ROMs.
I put my first ROM slot (Stock with gapps added and amazon crap removed) on Flight Mode and now when I try and put it on wireless it restarts....
OurFriendIrony said:
@GreatEmerald, whats AOSP? I'm thinking of playing around a bit more. I want to try out some more ROMs.
I put my first ROM slot (Stock with gapps added and amazon crap removed) on Flight Mode and now when I try and put it on wireless it restarts....
Click to expand...
Click to collapse
AOSP = Android Open Source Project
Many other devices have an AOSP build and is typically a very nice build to flash if you like the core android feel with some extra very nice features.
OurFriendIrony said:
@GreatEmerald, whats AOSP? I'm thinking of playing around a bit more. I want to try out some more ROMs.
I put my first ROM slot (Stock with gapps added and amazon crap removed) on Flight Mode and now when I try and put it on wireless it restarts....
Click to expand...
Click to collapse
Yea, as mentioned, AOSP is a ROM for stock Android 4.2.2, pretty much the only big ROM available for the HDX7 right now: http://forum.xda-developers.com/showthread.php?t=2607185
It works pretty well as it is, I'm impressed it's as good already given how new the project is. Though it still has some issues for normal use. Aside from the bugs mentioned in the post, Chrome crashes as soon as it's launched (but you can use Firefox instead), as does the Kindle app (which is mainly what is stopping me from using it, because the point of a Kindle is the integration with Amazon services...). Also, the Facebook app fails to install for some reason.
Everything else I tried works fine. I installed F-Droid, a file manager, Busybox and a terminal, then the Amazon app and some of the Amazon cloud apps, and finally Skype. All of them work very nicely on AOSP. Even tested a video call on Skype and it worked without any problems (including the camera working correctly).
As someone new to Android and from a GNU/Linux background, I'm really happy that F-Droid exists. It's an app store/package manager that offers only free and open source software. For regular users that might sound as not a big deal, but actually filtering software by license is more powerful than one would think. You're guaranteed to have only apps that have no spyware and adware, because you can't hide them in open code. And those who make apps without publishing their code obviously have something to hide. So much like in GNU/Linux, the first place to check for new apps for me is F-Droid, and after that the main store of the OS (be it Google Play or Amazon Store), and only then 1Mobile market.
I still would like to know more about that partitioning, though. I figured out that the emulated SD card is shared between ROMs (I uploaded F-Droid to the Downloads directory on FireOS, and could see it on AOSP just as well), but I still don't know what exactly the two partitions you have to make to set up a ROM slot are and how much space should be allocated to them.
GreatEmerald said:
Yea, as mentioned, AOSP is a ROM for stock Android 4.2.2, pretty much the only big ROM available for the HDX7 right now: http://forum.xda-developers.com/showthread.php?t=2607185
It works pretty well as it is, I'm impressed it's as good already given how new the project is. Though it still has some issues for normal use. Aside from the bugs mentioned in the post, Chrome crashes as soon as it's launched (but you can use Firefox instead), as does the Kindle app (which is mainly what is stopping me from using it, because the point of a Kindle is the integration with Amazon services...). Also, the Facebook app fails to install for some reason.
Everything else I tried works fine. I installed F-Droid, a file manager, Busybox and a terminal, then the Amazon app and some of the Amazon cloud apps, and finally Skype. All of them work very nicely on AOSP. Even tested a video call on Skype and it worked without any problems (including the camera working correctly).
As someone new to Android and from a GNU/Linux background, I'm really happy that F-Droid exists. It's an app store/package manager that offers only free and open source software. For regular users that might sound as not a big deal, but actually filtering software by license is more powerful than one would think. You're guaranteed to have only apps that have no spyware and adware, because you can't hide them in open code. And those who make apps without publishing their code obviously have something to hide. So much like in GNU/Linux, the first place to check for new apps for me is F-Droid, and after that the main store of the OS (be it Google Play or Amazon Store), and only then 1Mobile market.
I still would like to know more about that partitioning, though. I figured out that the emulated SD card is shared between ROMs (I uploaded F-Droid to the Downloads directory on FireOS, and could see it on AOSP just as well), but I still don't know what exactly the two partitions you have to make to set up a ROM slot are and how much space should be allocated to them.
Click to expand...
Click to collapse
The system partition only needs to be as big as the Rom or backup you flash is, the data partition I typically make as big as possible (4000 mb) since this is what your Rom will consider internal storage. This is where apps and app data will be downloaded onto, where the rest of the data on your ad card is shared and is used for music, videos and lots of other custom stuff you can add. As for the cache I leave it at the default, this is where temporary data for apps is stored ( for example when you play a youtube video, it is temporarily stored on this partition.
spaghettiknight said:
The system partition only needs to be as big as the Rom or backup you flash is, the data partition I typically make as big as possible (4000 mb) since this is what your Rom will consider internal storage. This is where apps and app data will be downloaded onto, where the rest of the data on your ad card is shared and is used for music, videos and lots of other custom stuff you can add. As for the cache I leave it at the default, this is where temporary data for apps is stored ( for example when you play a youtube video, it is temporarily stored on this partition.
Click to expand...
Click to collapse
Ah, that's good to know. It makes me wonder, though – can I resize partitions in some way? Say, I created a smallish partition setup for ROM slot 1, then another one for ROM slot 2, and then have a bit spare; can I allocate the whole space to ROM slot 1 if I no longer need ROM slot 2? Or to do a backup, clear the partition setup, then restore the backup into newly sized partitions?
GreatEmerald said:
Ah, that's good to know. It makes me wonder, though – can I resize partitions in some way? Say, I created a smallish partition setup for ROM slot 1, then another one for ROM slot 2, and then have a bit spare; can I allocate the whole space to ROM slot 1 if I no longer need ROM slot 2? Or to do a backup, clear the partition setup, then restore the backup into newly sized partitions?
Click to expand...
Click to collapse
yes, what i would do is backup my current setup, delete the rom slot your using, then remake it with your newly picked partitions
Nevermind. Got it working now. Thanks for the guide!
safestrap not working on my kindle hdx 7"
Hi my kindle is already rooted and I used towelroot. I have supersu installed too. I'm currently on the step of where I should install safestrap, but it seems safestrap is not working on my tablet. I tried 3.65, 3.72, 3.75 version of safestrap but it does not work. It always restart normally. Not in recovery. Pls help. 13.3.2.8 version. Thank u in advance.
pinksummer17 said:
Hi my kindle is already rooted and I used towelroot. I have supersu installed too. I'm currently on the step of where I should install safestrap, but it seems safestrap is not working on my tablet. I tried 3.65, 3.72, 3.75 version of safestrap but it does not work. It always restart normally. Not in recovery. Pls help. 13.3.2.8 version. Thank u in advance.
Click to expand...
Click to collapse
Have you blocked OTA with HDX Toolkit? If not your device will likely brick if Amazon attempts to push an update. At present the blocker in HDX toolkit is the only one that works on 3.2.8.
Your attention should be focused on this task; can deal with safestrap once OTA block is in place.
ya I had to learn about that the hard way

Categories

Resources