Related
Okay I understand you have to use mkrom and Linux (or cygwin on Windows) to roll your own ROM my question is regarding how one could say remove one program from the SE ROM and include something else, for instance take off the byte counter and put another different counter on or such, would you just copy the necessary files (.exe and dll's) to the files1 or files2 folder and that's it ? What more is involved? Thanks in advance!
for simple programs, that is all there is to it.
some might need more research, as to which registry settings need to be tweaked to get te program to run from the windows directory. and what settings it needs to run at all.
You copy the files to either files1 or files2. Both sets of files end up in the \Windows subdir. So if you do not want to copy the files to RAM (see below), you should make sure the program is set to run from \Windows. Then you add any necessary registry keys to "default.reg", and any file-copy or directory creation commands to initobj.txt. Then run "mkrom <ROMfile>" and hey-presto.
Thanks so much for all your guys awesome work!!
entropy1980 said:
ok sounds good, what would one need to do to mod the registry for the programs (By that I mean prior to booting) I don't want to be mucking around with a reg editor after the device boots just to get the progs to work...
Click to expand...
Click to collapse
Not sure I understand the question. Default.reg just holds the entire registry as present after a cold restart. So if you put something in there, this will be in the registry when the device wakes up.
I think we wrote at the same time , so you answered my question before I posted it !!! What you said made complete sense! Thanks!
entropy1980 said:
[...]so you answered my question before I posted it !!! [...]
Click to expand...
Click to collapse
I installed the phpBB telepathy mod a couple of days ago, so I guess it's working.
Hey I knew you were going to say that.... :lol: :lol:
hi,
i want to add the skelmir java virtual machine (thats default installed in windows\ceej) and copy the swingall.jar in the windows\ceej map.
I have the cab file of the virtual machine but i can't find out which files are in it (when i open it with cabextract is shows .001 files and not the files that i find back in the device)
please help me
Using Special Edition ROM, Tthe CabInst tool will run CAB files on the device if you move it there manually and double-tap it. It allows to set a new directory to install in.
Also the System Snapshot tool will write a file in the root of the device which holds a list of the entire filesystem and registry contents, so you can compare and see what changed. UltraEdit for the desktop has a compare function.
Good luck...
hi,
i installed it to a seperate directory and zipped the files. i also took a snapshot when the xda was fresh and after install. i only can't find where the xda's gets is files from in:
43 <! [\Windows\AppMgr]
8544 <! 31/12/2002 12:31 1632 FC0E9EE1 Skelmir CEEJ Virtual Machine.DAT
8576 <! 16/02/2003 23:10 27 AEBB1DF3 CEEJ.lnk
8587 <! 16/02/2003 23:10 40 1EAF4EB3 CEEJ Examples.lnk
8588 <! 16/02/2003 23:10 27 AEBB1DF3 CEEJ.lnk
because these are not in the map where i extracted the cab file too. maybe you can take a look for me and tell me what i have to change in mkrom to have ceej by default installed
the extraced cab map:
http://www.devosjansen.nl/xda/java installed.rar
the snapfiles:
http://www.devosjansen.nl/xda/xda snapshots files.rar
thanks in advance
laurens0619 said:
hi,
i installed it to a seperate directory and zipped the files. i also took a snapshot when the xda was fresh and after install. i only can't find where the xda's gets is files from in:
43 <! [\Windows\AppMgr]
Click to expand...
Click to collapse
These files are generated during the install process, and contain uninstall information. You do not need to write them if you install in ROM, since you don't need/want your programs to show up the in the 'Add/Remove Programs' dialogue.
ah i understand,
so i just put the files in the files1 or files2 directory and add this reg files to the default.reg? i dony really understand the readme file
ah little kick,
isn't also good for the next SE rom? because you have finally a java virtual machine on the xda and the app is freeware (got it from www.skelmir.com)
laurens0619 said:
isn't also good for the next SE rom?
Click to expand...
Click to collapse
Noted...
nice but can you please help me out for the moment? i dont know which part i must add to the default.reg file
laurens0619 said:
I dont know which part i must add to the default.reg file
Click to expand...
Click to collapse
default.reg holds the registry that is present when the system wakes up from cold-boot. So any registry entries your installer (or first run of the app) has made that you would like to have present should go in there. Clear enough?
almost
so i just copy paste the **** at the end of the reg file? and the files in the files 2 map
but how will the rom know where to put the files??
sorry if i'm stupid but i don't want to f*ck my rom so i can use me xda's as a frisbee
Yes, the registry entries can be pasted at the end of default.reg. It doesn't matter if there's earlier entries with the same values, since the latter ones override.
All files in files1 and files2 will end up in \Windows, and if you want them somewhere else, (where they'll take up RAM), you must manually copy them (or pre-made links pointing to them) by issueing commands in initobj.txt.
Take a real close look at initobj.txt, and you'll get the picture.
Hey guys...I have searched and search the forums for a way to change the shortcut icons for my programs...can anyone help me with this? I downloaded resource editor but I cannot get it to work...I cant believe something that should be so simple is this much of a pain!!
Anyways, I appreciate any help that you guys/gals can offer.
try this
http://www.s-k-tools.com/sksmgr/sksmgr.html
it's exactly what you are looking for..
EAsy!!!
Use ResHacker(http://www.angusj.com/resourcehacker/) and make sure u have some your files formated as .ico. U can find such files @
http://browse.deviantart.com/customization/icons/dock/?order=9&alltime=yes
http://www.iconarchive.com/category/application-icons.html
http://www.crystalxp.net/
AWESOME!!! They both work like a charm!!!
Since you have to pay for SK Tools I guess I will go with the freeware...but thanks again this was exactly what i needed and very user friendly!
Here's Pics
Checkout some of mine!!! Vistaized!!!!
mrram said:
Use ResHacker(http://www.angusj.com/resourcehacker/) and make sure u have some your files formated as .ico. U can find such files @
http://browse.deviantart.com/customization/icons/dock/?order=9&alltime=yes
http://www.iconarchive.com/category/application-icons.html
http://www.crystalxp.net/
Click to expand...
Click to collapse
Ive got a question about using ResHacker...what file format do the icons have to be in? Ive got them in .ico also I am trying to put a icon to an application that doesnt currently have one do you know how I can do this in Res Hacker
In SKtools: I'm having problems with the icon format as well...any idea what format its looking for?
I guess I spoke to soon about them running perfect
How to
In ResHacker open file u want to change the icon of, then hit the action button, and then replace icon. However, with some .exe or .dll files u cannot change there icons.
any help on this one. I have shortcut creator and for some reason when i point it to the Lnk file then to the ico file it just makes a duplicate and renames the old .bak. the icons don't change?
I tried the sk iconmaker and it won't show any of my ico files in the folder.
how can you change icons?
Well, You could do it manually. To change the icon of all shortcuts download a registry editor (PHM RegEdit is free and great), Then goto HKEY_CLASSES_ROOT\inkfile\defaulticon.Edit the string value "default" to the path to the icon you whant all shortcuts to have. The path must lead to a exe, dll or ico file.
DOWNLOAD rViwer TO MANAGE ICON IN dll FILES
http://www.freewarepocketpc.net/ppc-download-rviewer-v0-2.html
this stuff is gold thanks for all the links.
Has anyone tried to sucessfull take out the dll file from the folder to the storage card....
kindly help if yes..
vikasraj said:
Has anyone tried to sucessfull take out the dll file from the folder to the storage card....
kindly help if yes..
Click to expand...
Click to collapse
Look at this post:
jmckeejr said:
Are you trying to extract the files from the ROM? You can use ROMExtractor to copy hard to get files from device. just run the exe and select the filesyou want.
Click to expand...
Click to collapse
Tools for hacking dll, exe, etc. for shortcut icons.
Add one more tools:
Restorator,
Restorator is an award-winning utility to edit windows resources in applications and their components, e.g. files with .exe, .dll, .res, .rc, .dcr, extension (see PE files and RES files).
Change, add, remove resources such as text, images, icons, sounds, videos, version, dialogs and menus in almost all programs.
Restorator is used for translation/localization, customization, design improvement and development.
This resource editor comes with an intuitive user-interface, complete documentation with many examples and prompt user support in the discussion forums or via email.
Download: [trial version] - [patch for full version]
Click to expand...
Click to collapse
besides we got:
SK Shortcut Manager
ytsejam_ said:
try this
http://www.s-k-tools.com/sksmgr/sksmgr.html
it's exactly what you are looking for..
Click to expand...
Click to collapse
Resource Hacker
mrram said:
Use ResHacker(http://www.angusj.com/resourcehacker/) and make sure u have some your files formated as .ico. U can find such files @
http://browse.deviantart.com/customization/icons/dock/?order=9&alltime=yes
http://www.iconarchive.com/category/application-icons.html
http://www.crystalxp.net/
Click to expand...
Click to collapse
Resource Editor
Colin Wilson has written an open source Resource Editor which may interest those looking for source code.
Click to expand...
Click to collapse
RViewer for PPC
WhiteRussianBC said:
Well, You could do it manually. To change the icon of all shortcuts download a registry editor (PHM RegEdit is free and great), Then goto HKEY_CLASSES_ROOT\inkfile\defaulticon.Edit the string value "default" to the path to the icon you whant all shortcuts to have. The path must lead to a exe, dll or ico file.
DOWNLOAD rViwer TO MANAGE ICON IN dll FILES
http://www.freewarepocketpc.net/ppc-download-rviewer-v0-2.html
Click to expand...
Click to collapse
&
RomExtractor(PPC exe)
jmckeejr said:
Are you trying to extract the files from the ROM? You can use ROMExtractor to copy hard to get files from device. just run the exe and select the filesyou want.
Click to expand...
Click to collapse
wg5566 said:
Add one more tools:
Restorator,
besides we got:
SK Shortcut Manager
Click to expand...
Click to collapse
Great useful thread. Thanks.
Concerning icons I like to add this thread
Hi
How does one cook a custom theme into a ROM and make that the default theme? I've tried editing quite a few registry entrys and it still does not work.
Another question along the same lines, how do i cook in a custom today wallpaper? I've tried changing registry entrys here as well but it didn't work either
Thanks
Mod edit: Solved thread
well...
long history here...
First.. the themes for 6.5 and 6.5.X are not the same theme, so genereally if you want to cook inside a theme that you have made... simply be sure that you have a TSK that contains all the registry entries for images and the two images in JPG format with your size screen set them as "read only" and "archive" attribs then save the cab as winmo cab then rename it from .cab to .tsk then.... put it into a EXT pkg in your EVK kitchen or whatever you have EVK or OSK make a pkg called "my theme name" inside a folder called "FILES" inside that folder all images of the theme and the TSK too... then go to your RUNCC or autoinstall or however you have and set in the txt file this comand...
TSK: \Windows\My theme name.tsk
at the end of the file this way in the botting procces frist customization the theme will be set as default
is the dirt way but you can make it safely instead of changing many regs that simply you will forgot the original
Y'all must to remember that if you want to patch the theme or install a them in a runing working rom in teh device you must to trust sign the TSK but if you are cooking the kitchen will do it for you
The wall paper is easy: just set whatever pic you want as the wallpaper using either Home-settings or the pic and video tool. Then open \windows, and look for the newest files. You'll see two files named stwater_###x###.png or something very similar (could be tdywater). Grab these two files and then when you're editing a .tsk file, include the files in it. Now you're done.
If you want to cook the theme straight into the rom, then you need to dump all of the reg keys and put them into an app.reg file in a package that runs at the end of the build. Name your two wallpaper files (portrait and landscape) "classicblue_stwater_480_640.jpg" and "classicblue_stwater_640_480.jpg," and stick them in the same EXT. (To get the proper names for your device, look in (SYS\Build#\dpi_192_resh_480_resv_640\COMMON\base_dpi_192_resh_480_resv_640), obviously with the proper resolution.) Look through your add2config.txt or config.txt files, and make sure that no other stock .tsk is run during customization.
I know i to cook a theme and set as default and blabla....but its interesting know how to trust sign the TSK when i make a theme.cab to put in a working rom...can you explain?
+ Que PPC said:
Y'all must to remember that if you want to patch the theme or install a them in a runing working rom in teh device you must to trust sign the TSK but if you are cooking the kitchen will do it for you
Click to expand...
Click to collapse
A way that bobsbbq has taught me, and has worked for a 6.5.5 theme
make a new folder in your EXT packes, called whatever the theme is, and in there make another folder called files, in the files folder copy across everything in the theme's cab. then go back into the root of the themes package folder and make a new text document called add2config in there paste the following:
TSK: \Windows\XXXX.tsk
where XXXX is the exact name of yout .tsk file found in the themes cab (so it will also be in the files folder if you want to copy the file name exactly.
Save the text document and then just select it in your kitchen
af974 said:
I know i to cook a theme and set as default and blabla....but its interesting know how to trust sign the TSK when i make a theme.cab to put in a working rom...can you explain?
Click to expand...
Click to collapse
If you try to sign a cab with the last year SDK certs you will have an error is better you to trust sign your cabs reading this article
http://forum.xda-developers.com/showthread.php?t=650309
Thanks guys for the replies I ended up using Farmer Ted's method and it's working exactly how I wanted it to.
BTW: Farmer Ted, whenever I ask for help, whether on this forum or another, you're always among the first to help me. HUGE thanks dude
Thanks Que,
This is very usefull for me
+ Que PPC said:
If you try to sign a cab with the last year SDK certs you will have an error is better you to trust sign your cabs reading this article
http://forum.xda-developers.com/showthread.php?t=650309
Click to expand...
Click to collapse
No prob dude... BTW ppl understand that...
If you want to make fixes for your ROM....
YOU MUST!! to make a trusted sign cab with signed files inside...
if you want to cook the fix... so the kitchen will sign all of them
+ Que PPC said:
No prob dude... BTW ppl understand that...
If you want to make fixes for your ROM....
YOU MUST!! to make a trusted sign cab with signed files inside...
if you want to cook the fix... so the kitchen will sign all of them
Click to expand...
Click to collapse
i dont understand why we have to sign a cab file, when we remove certs in kitchen?
Code:
..\TOOLS\implantxip -xip xip.bin -payload OS.nb.payload -imgstart %imgstart% -%uldr% -pp 16 -%nocert%
ive never signed a cab file in my life and they always install fine
I've never signed a cab, either. EVK makes it too easy, lol.
+ Que PPC said:
well...
long history here...
First.. the themes for 6.5 and 6.5.X are not the same theme, so genereally if you want to cook inside a theme that you have made... simply be sure that you have a TSK that contains all the registry entries for images and the two images in JPG format with your size screen set them as "read only" and "archive" attribs then save the cab as winmo cab then rename it from .cab to .tsk then.... put it into a EXT pkg in your EVK kitchen or whatever you have EVK or OSK make a pkg called "my theme name" inside a folder called "FILES" inside that folder all images of the theme and the TSK too... then go to your RUNCC or autoinstall or however you have and set in the txt file this comand...
TSK: \Windows\My theme name.tsk
at the end of the file this way in the botting procces frist customization the theme will be set as default
is the dirt way but you can make it safely instead of changing many regs that simply you will forgot the original
Y'all must to remember that if you want to patch the theme or install a them in a runing working rom in teh device you must to trust sign the TSK but if you are cooking the kitchen will do it for you
Click to expand...
Click to collapse
I started having problems with Farmer Ted's way so I tried this one instead. It works perfectly except for one thing, that it needs a restart before it's effective. Is there any way to get it working on first boot?
I use this one:
OEM\ExtendedPKG\config.txt
Code:
LOCK:Enabled
TSK: \WINDOWS\Htc_black.tsk
LOCK:Disabled
RST: Reset
This will set that theme on first boot, of course you need to have RunnCC running.
You must change Htc_black.tsk with your tsk name.
seeM_ZA said:
I started having problems with Farmer Ted's way so I tried this one instead. It works perfectly except for one thing, that it needs a restart before it's effective. Is there any way to get it working on first boot?
Click to expand...
Click to collapse
af974 said:
I use this one:
OEM\ExtendedPKG\config.txt
Code:
LOCK:Enabled
TSK: \WINDOWS\Htc_black.tsk
LOCK:Disabled
RST: Reset
This will set that theme on first boot, of course you need to have RunnCC running.
You must change Htc_black.tsk with your tsk name.
Click to expand...
Click to collapse
I did mine exactly like that but it doesn't work. It only works after I reboot the phone atleast once
EDIT: I noticed if i go to settings/home, it is set as the default theme (it's hilighted) but it's not actually visible anywhere.
EDIT2: Never mind it's sorted out. I went back to Farmer Ted's way and got it to work exactly how I wanted it.
Hi guys,
How can I change cooked in wallpaper if my theme doesn't contain a wall?
Farmer Ted said:
The wall paper is easy: just set whatever pic you want as the wallpaper using either Home-settings or the pic and video tool. Then open \windows, and look for the newest files. You'll see two files named stwater_###x###.png or something very similar (could be tdywater). Grab these two files and then when you're editing a .tsk file, include the files in it. Now you're done.
Click to expand...
Click to collapse
I believe this is what you want to do
[★] said:
A way that bobsbbq has taught me, and has worked for a 6.5.5 theme
make a new folder in your EXT packes, called whatever the theme is, and in there make another folder called files, in the files folder copy across everything in the theme's cab. then go back into the root of the themes package folder and make a new text document called add2config in there paste the following:
TSK: \Windows\XXXX.tsk
where XXXX is the exact name of yout .tsk file found in the themes cab (so it will also be in the files folder if you want to copy the file name exactly.
Save the text document and then just select it in your kitchen
Click to expand...
Click to collapse
Does this method select the theme on 1st boot?
btw, how do you select a default Wallpaper for Manila's Home Tab?
sometimes you need to take your theme tsk rename it to .cab open it with cab manager and change the pics inside
the manila use as default a pic inside the EXT or OEM pkg it contains the manila app... search for the image and just replace it same size, and attributes.
+ Que PPC said:
sometimes you need to take your theme tsk rename it to .cab open it with cab manager and change the pics inside
the manila use as default a pic inside the EXT or OEM pkg it contains the manila app... search for the image and just replace it same size, and attributes.
Click to expand...
Click to collapse
Thanks. Will try it out
what would the image name be? in EXT Manila.exe is only in Manila_Core and I don't have any image there except Manila files...
In OEM I saw the default HTC Black.tsk along with HTC stwater images...
Do I need to replace these 2 Images (HTC Black Stwater... 480x800 and 800x480)?
First of all, sorry for openeing a new thread; but surely i have searched all of chef central din't find anything much or maybe din't understand which one was my solution.
The problem is after boot of my ROM ( regardless of which boot ie 1st 2nd or 10th ) i get 2 pop up errors:
1) "The file 'programs' cannot be opened. Either is not signed with a trusted certificate or one of it's components cannot be found.If the problem persists please try reinstalling or restoring this file."
2) "The file 'Tools' cannot be opened. Either is not signed with a trusted certificate or one of it's components cannot be found.If the problem persists please try reinstalling or restoring this file."
I have a folder called "Tools" in the start menu, and it works fine, and everything inside also works good. But still this error.
I'm pretty sure all the Packages cooked which are meant to go in this folder do go in.
And the programs error is it anything to do with the fact that in the APP.DAT in almost all packages i have used similar naming:
Code:
Directory("\Windows\Start Menu\Programs"):-Directory("System")
Directory("\Windows\Start Menu\Programs\Tools\Tweaks"):-File("Flip_IT.lnk","\Windows\_Flip_IT.lnk")
and also added similar REG in the REGS :
[HKEY_LOCAL_MACHINE\Security\Shell\StartInfo\Start\Tools\Tweaks\Flip_it.lnk]
Click to expand...
Click to collapse
As i was not sure which one will decide the location, so some packages have only .REGs, some have only APP.DATs and some have both ( but all the locations are same that is sure !)
Please help me with this.
Thanks alot.
PS: I have enabled NoCert in EVK, and also cooked in the latest ( 2015 ? ) SDKCerts EXT. And after that no other apps give an unsigned problem.
Just a question, this isnt the full app.dat right?
Code:
Directory("\Windows\Start Menu\Programs"):-Directory("System")
Directory("\Windows\Start Menu\Programs\Tools\Tweaks"):-File("Flip_IT.lnk","\Windows\_Flip_IT.lnk")
If yes, you miss some lines,this app.dat is just copying a link to startmenu but i guess that you need the program in Windows.
i'm afraid that is the full App.DAT
here is another one
Code:
Directory("\Windows\Start Menu\Programs"):-Directory("System")
Directory("\Windows"):-Directory("appdb")
Directory("\Windows\appdb"):-File("_end_mid_2.png","\Windows\_end_mid_2.png")
Directory("\Windows\appdb"):-File("_end_mid_8.png","\Windows\_end_mid_8.png")
Directory("\Windows\appdb"):-File("_folder_2.png","\Windows\_folder_2.png")
Directory("\Windows\appdb"):-File("_folder_8.png","\Windows\_folder_8.png")
Directory("\Windows\appdb"):-File("_folder_8_2.png","\Windows\_folder_8_2.png")
Directory("\Windows\appdb"):-File("_lock_gray.png","\Windows\_lock_gray.png")
Directory("\Windows\appdb"):-File("_lock_green.png","\Windows\_lock_green.png")
Directory("\Windows\appdb"):-File("_lock_red.png","\Windows\_lock_red.png")
Directory("\Windows\appdb"):-File("_logo_2.png","\Windows\_logo_2.png")
Directory("\Windows\appdb"):-File("_single_2.png","\Windows\_single_2.png")
Directory("\Windows\appdb"):-File("_single_8.png","\Windows\_single_8.png")
Directory("\Windows\appdb"):-File("_start_2.png","\Windows\_start_2.png")
Directory("\Windows\appdb"):-File("_start_8.png","\Windows\_start_8.png")
Directory("\Windows\appdb"):-File("_suite_2.png","\Windows\_suite_2.png")
Directory("\Windows\appdb"):-File("_suite_8.png","\Windows\_suite_8.png")
Directory("\Windows\appdb"):-File("_ack_2.png","\Windows\_ack_2.png")
Directory("\Windows\appdb"):-File("_ack_8.png","\Windows\_ack_8.png")
Directory("\Windows\appdb"):-File("_compiling.png","\Windows\_compiling.png")
Directory("\Windows\appdb"):-File("_disable_2.png","\Windows\_disable_2.png")
Directory("\Windows\appdb"):-File("_disable_8.png","\Windows\_disable_8.png")
Directory("\Windows\appdb"):-File("_dt_2.png","\Windows\_dt_2.png")
Directory("\Windows\appdb"):-File("_dt_8.png","\Windows\_dt_8.png")
Directory("\Windows\appdb"):-File("_dukeok_2.png","\Windows\_dukeok_2.png")
Directory("\Windows\appdb"):-File("_dukeok_8.png","\Windows\_dukeok_8.png")
Directory("\Windows\appdb"):-File("_empty.png","\Windows\_empty.png")
Directory("\Windows\appdb"):-File("_end_ams_2.png","\Windows\_end_ams_2.png")
Directory("\Windows\appdb"):-File("_end_ams_8.png","\Windows\_end_ams_8.png")
Directory("\Windows\appdb"):-File("_logo_8.png","\Windows\_logo_8.png")
Directory("\Windows\Start Menu\Programs\\Tools\System"):-File("Java.lnk","\Windows\Java.lnk")
This seems to be correct right ?
Can you please tell me does APP.DAT decide the position or REG ? and what if both exist.
Thanks.
Can an incomplete app.dat cause those errors ?
EDIT: i have identified 3 packages have incomlete app.dat
1) task manager
app.dat says :
Directory("\Windows\Start Menu\Programs\Tools\"):-File("Task Manager.lnk","\Windows\dotFred Task Manager.lnk")
Directory("\Windows\Start Menu\Programs\Tools\Utilities"):-File("Regeditor.lnk","\Windows\dotFred RegEdit.lnk")
Click to expand...
Click to collapse
reg also defines a location.
2) flip it
app.dat says
Directory("\Windows\Start Menu\Programs"):-Directory("System")
Directory("\Windows\Start Menu\Programs\Tools\Tweaks"):-File("Flip_IT.lnk","\Windows\_Flip_IT.lnk")
Click to expand...
Click to collapse
reg defines location and settings.
3) torch
app.dat says
Directory("\Windows\Start Menu\Programs\Tools\Utilities"):-File("hTorch Flashlight.lnk","\Windows\hTorch Flashlight.lnk")
Click to expand...
Click to collapse
reg defines settings only.
4) reg editor
app.dat says:
Directory("\Windows\Start Menu\Programs\Tool\Utilities"):-File("PHM RegEdit.lnk","\Windows\PHM RegEdit.lnk")
Click to expand...
Click to collapse
reg defines sttings and location.
Can anyone of the above cause the issue ?
can some please help me correct them ?
Thanks.
EDIT: can someone please tell me the REG to enable Call Waiting Tone.
I don't hear any tone it when i have a call waiting.
The app.dat decide the position of file and folders.
I found thi " Flip-IT" from a Tom Codon thread and i used Cab Converter for extracting it.
This is the App.dat that i got:
Directory("\Windows\Start Menu\Programs\Tools"):-File("Flip_IT.lnk","\Windows\Flip_IT.lnk")
Click to expand...
Click to collapse
In red are the subfolders that doesnt come with the original.
There are some difference with your but i dunno if this is the problem but worth try.
Umm well i have defined those locations as to fit them lnk in the place i want in the start menu.. isn't that the way ?
Im Quoting you from 1st post:
1) "The file 'programs' cannot be opened. Either is not signed with a trusted certificate or one of it's components cannot be found.If the problem persists please try reinstalling or restoring this file."
2) "The file 'Tools' cannot be opened. Either is not signed with a trusted certificate or one of it's components cannot be found.If the problem persists please try reinstalling or restoring this file."
you got this popup error automatically, no need to open any folder\file?
It seems that you put a wrong shortcut to files called "Tools and programs" in your StratUp folder.
Check some other App.dat
i have checked all APP.DAT in the EXT can't find any which i cook and does not get cokked in the correct location ?
Umm and the two errors are seperate not in one only.
So i guess the conflict is there with 2 seperate folders "Tools" and "programs" respectively.
Ideally it should not conflict with tools, because i do have a tools folder in the start menu.. so everything should go there :/
any other help?
Try to cook a rom without one of the latest apps that you have add and if the problem gone then you have find the issue,after that post here the responsable so we can look at it.
madnish30 said:
i have checked all APP.DAT in the EXT can't find any which i cook and does not get cokked in the correct location ?
Umm and the two errors are seperate not in one only.
So i guess the conflict is there with 2 seperate folders "Tools" and "programs" respectively.
Ideally it should not conflict with tools, because i do have a tools folder in the start menu.. so everything should go there :/
any other help?
Click to expand...
Click to collapse
af974 said:
Try to cook a rom without one of the latest apps that you have add and if the problem gone then you have find the issue,after that post here the responsable so we can look at it.
Click to expand...
Click to collapse
I'll try and cook without the 5 EXT i identified with wrong app.dats ?
I have had this problem since long, but i din't bother much, so i really don't know whats the issue..
it has been there basically since i tweaked the start menu locations.
now i have to get rid of it cuz any ROM user won't like to just press ok and continue with the ROM.
I'll try.
My suggestion is to try one by one but ofcourse this way you need to flash 5 times your phone.
Did you ,maybe,tweaked your Initflashfile.dat?
madnish30 said:
I'll try and cook without the 5 EXT i identified with wrong app.dats ?
I have had this problem since long, but i din't bother much, so i really don't know whats the issue..
it has been there basically since i tweaked the start menu locations.
now i have to get rid of it cuz any ROM user won't like to just press ok and continue with the ROM.
I'll try.
Click to expand...
Click to collapse
No i don't play with initiaflash... because i don't know much about it..
I guess i will not cook anyone of them so that if its one of them i will just download fresh CABs for them and convert them into EXTs rather than flashing my phone 5 times..
Thanks alot.
i tried cooking without those apps no luck
Same 2 errors hence those 2 apps are ok..
Attached my Initflashfile.dat if that helps.
Please help.
You really need to look in your startup folder to see what is in there. That's the first thing to do. Then, look in the start menu and see if anything weird is going on. Particularly, look for corrupted files or folders. If there are any files that look like folders, that could be the issue.
You're initflashfiles.dat is effin' huge!! Learn to make a cab, or relocate apps to windows. You must be wasting a ton of storage space.
thanks for the help Ted,
In the startup i see 2 folders
1) programs in which there is tools->system->Arkswitch.
2) tools -> system -> XDA_UC.
rest are the normal i guess.
Then in the startmenu it seems fine.
but one problem there i see in the start menu i see a system folder which is empty AFAIK i did not create and such path why is that there ?
You're initflashfiles.dat is effin' huge!! Learn to make a cab, or relocate apps to windows. You must be wasting a ton of storage space.
Click to expand...
Click to collapse
I'm not good with initflashfiles.dat i don't know much about it.
Can you please link me to a thread where i can learn about it.
Also what do you mean by CABs ? does that mean using UC to install via CABs ?
And how can i reloacte apps to windows ?
can you give a little explaination please.
thanks alot for the help.
The app.dat for Arksswitch is
Directory("\Windows"):-Directory("StartUp")
Directory("\Windows\Start Menu\Programs"):-Directory("Tools")
Directory("\Program Files"):-Directory("ArkSwitch")
Directory("\Program Files\ArkSwitch"):-Directory("Theme")
Directory("\Program Files\ArkSwitch"):-Directory("NLS")
Directory("\Program Files\ArkSwitch\NLS"):-File("1033.xml","\Windows\1033.xml")
Directory("\Program Files\ArkSwitch\NLS"):-File("1036.xml","\Windows\1036.xml")
Directory("\Program Files\ArkSwitch\NLS"):-File("1040.xml","\Windows\1040.xml")
Directory("\Program Files\ArkSwitch\NLS"):-File("1049.xml","\Windows\1049.xml")
Directory("\Program Files\ArkSwitch\Theme"):-File("config.xml","\Windows\config.xml")
Directory("\Program Files\ArkSwitch\Theme"):-File("status-bar.png","\Windows\status-bar.png")
Directory("\Program Files\ArkSwitch\Theme"):-File("x-deselected.png","\Windows\x-deselected.png")
Directory("\Program Files\ArkSwitch\Theme"):-File("x-selected.png","\Windows\x-selected.png")
Directory("\Program Files\ArkSwitch"):-File("Microsoft.WindowsMobile.Gestures.dll","\Windows\Microsoft.WindowsMobile.Gestures.dll")
Directory("\Program Files\ArkSwitch"):-File("ArkSwitch.exe","\Windows\ArkSwitch.exe")
Directory("\Program Files\ArkSwitch"):-File("ArkSwitchNative.dll","\Windows\ArkSwitchNative.dll")
Directory("\Windows\Start Menu\Programs\Tools\System"):-File("ArkSwitch.lnk","\Windows\_ArkSwitch.lnk")
Directory("\Windows\StartUp\Programs\\Tools\System"):-File("ArkSwitch.lnk","\Windows\_ArkSwitch.lnk")
Click to expand...
Click to collapse
and the app.dat for XDA_UC is
Directory("\Windows\StartUp\Tools\System"):-File("XDA_UC.mscr","\Windows\XDA_UC.mscr")
Click to expand...
Click to collapse
Please help me correct the two in order to remove the warning.
Will try and cook without them to see if they cause they problem.
I don't use xda_uc, but delete the sub-folders in startup and the problems go away.
App.dat copies files from windows to other places. In many cases, an app works fine in windows. You just need to fix paths (shortcuts, registry) so they point to windows. It's a complete waste to have two copies of all your files, especially when the ones in rom work perfectly fine. Personally, I don't even use app.dat's, except to create directories and to copy the important customization links into startup.
Edit: ok, so I'm looking at your initflashfiles.dat. One, there's something weird with your Manila twitter lines. Why does it appear twice? That's kind of a waste, and will slow down 1st boot. Also, you've got a dozen mui files in there. Just put in the one you need (0409 or whatever), and delete the rest. You've to two copies of a bunch of files that you don't use. Remove the lines you don't need from the app.dat.
As far as relocating apps, you've got 20 or so that would work fine in windows. For example, clean ram does not have to be in program files. Just leave the exe's in windows, and send 1 lang file to \windows\lang. The app will work fine. Do you really need 20 lang files for cleanram? Dude, that's a total waste.
Here's an easy one to fix: pocket rar. You've got two copies of it now on your device. Just get a shortcut for it to windows, and you're done. You stick rar.exe in a package, along with the shortcut, and send the shortcut to the start menu as normal. Speaking of which, it looks like you've got a syntax error there:
Directory("\Windows\Start Menu\Programs\\Tools\System"):-File("Pocket RAR.lnk","\Windows\_Pocket RAR.lnk")
Click to expand...
Click to collapse
Get rid of the extra \.
Thanks sir i got it, now i will impliment it.
Sir if you don't use app.dats then how do you chose which package shows up where in the start menu ?
I do pretty much everything with morscripts. I put all files and directories in zip files that are unzipped during customization, and all shortcuts are created by a script. This reduces the rom file count by hundreds (I have about 1800 rom files), and the zip files reduce the storage memory for files that have to be inserted elsewhere. There's also a restore script that resores files that change a lot and that aren't practical to cook in.
Anyway, were I you, I'd work on fixing all of your packages to make the rom more efficiently designed (instead of worrying about upgrading build numbers). I bet you could removed 500 files and clean up a crazy amount of memory (like 50 mb). It can be tricky moving an app to windows. Some apps have .ini files or similar settings files, and the app will crash or not load if the setting file is read-only, so you need to get the file into windows without having it read only (do it with an app.dat that copies or renames it to windows). Some apps have their settings in the same damn file name (like settings.txt), so you can't have them both in the same directory.
To relocate to windows, almost anything in the root program folder (like \program files\cleanram) can be moved straight to windows. Sub-folders generally just need to be moved to \windows. Typically, an exe looks for .dlls first in its own directory and second in \windows, so just about any dll can be moved to windows without issue. It will then usually look for the support files in the same directory that it's located in. The only apps I've had problems with are resco keyboard (the skin files seem to be hard coded to program files), and the latest Power Radio (2.4.0.2, or something like that). I had a bunch of power radio packages that worked fine in windows, but the latest wouldn't, so I just didn't do the upgrade.
It's usually easiest just to test things without cooking. In your case, you've already got everything in windows. Just click on exes and see what works and what doesn't. Some apps will need sub-folders relocated to windows, and it looks like your cab-to-ext package unfortunately renamed the rom files, so some files in the program folder will need to be copied to windows. Just do this for testing purposes, to see what works and what doesn't. I bet your rom is effin huge, and you could make it a lot leaner by cleaning your packages up. The cab-to-ext makers all more or less suck; it's better to do things manually (or with kheb 1.1).
Edit: you've got the tachan black theme in there twice, too. You really, really don't need those files copied elsewhere. I'm guessing there's a reg file with all the file locations (in HKCU\Software\Microsoft\Today). Fix it!!! All you need to do is do a 'replace all' and replace \\My Documents\\Themes\\tacchan23black with \\windows. Then delete that gawdawful app.dat file (both occurrences). That will remove 101 redundant files.
Do you remember this from your 1st post?
Directory("\Windows\Start Menu\Programs"):-Directory("System")
Directory("\Windows\Start Menu\Programs\Tools\Tweaks"):-File("Flip_IT.lnk","\Windows\_Flip_IT.lnk")
Click to expand...
Click to collapse
Here is (marked in red) your System folder (empty) in startmenu.
madnish30 said:
Then in the startmenu it seems fine.
but one problem there i see in the start menu i see a system folder which is empty AFAIK i did not create and such path why is that there ?
Click to expand...
Click to collapse
Thanks ted & af974.
i will try to do things you suggested.
But Ted, what does the attachment mscr do ?
I attached and EXT package from Chucky's Rom thanks to birkoffsjunk, i guess you will understand what mscr does looking at it.
madnish30 said:
Thanks ted & af974.
i will try to do things you suggested.
But Ted, what does the attachment mscr do ?
Click to expand...
Click to collapse
So, I'm pretty new at creating working ext packages from cab files, and I could use some help.
I'm trying to cook in the latest Quick Shutdown, and of course tie it to long press end key, like it was meant to be used for.
With some help from Grumps, here is what I've managed to get for my app.dat and app.reg:
app.dat:
Code:
Directory("\Windows"):-Directory("resources")
Directory("\Windows\resources"):-Directory("lang")
Directory("\Windows\resources"):-Directory("VGA")
Directory("\Windows\resources\VGA"):-File("bg_common_divider_section.png","\Windows\bg_ common_divider_section.png1")
Directory("\Windows\resources\VGA"):-File("bg_common_dotline.png","\Windows\bg_common_d otline.png1")
Directory("\Windows\resources\VGA"):-File("bg_common_msgbox.png","\Windows\bg_common_ms gbox.png1")
Directory("\Windows\resources\VGA"):-File("bg_common_titlebar.png","\Windows\bg_common_ titlebar.png1")
Directory("\Windows\resources\VGA"):-File("btn_checkbox_thirdState.png","\Windows\btn_c heckbox_thirdState.png1")
Directory("\Windows\resources\VGA"):-File("btn_common_checkbox.png","\Windows\btn_commo n_checkbox.png1")
Directory("\Windows\resources\VGA"):-File("btn_common_combo_down.png","\Windows\btn_com mon_combo_down.png1")
Directory("\Windows\resources\VGA"):-File("btn_common_input.png","\Windows\btn_common_i nput.png1")
Directory("\Windows\resources\VGA"):-File("btn_common_listitem_bottom.png","\Windows\bt n_common_listitem_bottom.png1")
Directory("\Windows\resources\VGA"):-File("btn_common_listitem_middle.png","\Windows\bt n_common_listitem_middle.png1")
Directory("\Windows\resources\VGA"):-File("btn_common_msgbox_large.png","\Windows\btn_c ommon_msgbox_large.png1")
Directory("\Windows\resources\VGA"):-File("btn_common_msgbox_small.png","\Windows\btn_c ommon_msgbox_small.png1")
Directory("\Windows\resources\VGA"):-File("btn_common_normal.png","\Windows\btn_common_ normal.png1")
Directory("\Windows\resources\VGA"):-File("btn_common_slider.png","\Windows\btn_common_ slider.png1")
Directory("\Windows\resources\VGA"):-File("sliderBtn.png","\Windows\sliderBtn.png1")
Directory("\Windows\resources\lang"):-File("lang.czech.txt","\Windows\lang.czech.txt")
Directory("\Windows\resources\lang"):-File("lang.danish.txt","\Windows\lang.danish.txt")
Directory("\Windows\resources\lang"):-File("lang.english.txt","\Windows\lang.english.txt ")
Directory("\Windows\resources\lang"):-File("lang.french.txt","\Windows\lang.french.txt")
Directory("\Windows\resources\lang"):-File("lang.german.txt","\Windows\lang.german.txt")
Directory("\Windows\resources\lang"):-File("lang.greek.txt","\Windows\lang.greek.txt")
Directory("\Windows\resources\lang"):-File("lang.italian.txt","\Windows\lang.italian.txt ")
Directory("\Windows\resources\lang"):-File("lang.polish.txt","\Windows\lang.polish.txt")
Directory("\Windows\resources\lang"):-File("lang.russian.txt","\Windows\lang.russian.txt ")
Directory("\Windows\resources\lang"):-File("lang.spanish.txt","\Windows\lang.spanish.txt ")
Directory("\Windows"):-File("bootloader.exe","%Windows%\bootloader.exe")
Directory("\Windows"):-File("ConfigQS.exe","%Windows%\ConfigQS.exe")
Directory("\Windows"):-File("DLLSetup.dll","%Windows%\DLLSetup.dll")
Directory("\Windows"):-File("QuickShutdown.exe","%Windows%\QuickShutdown.exe")
Directory("\Windows"):-File("Short_Power.exe","%Windows%\Short_Power.exe")
Directory("%Windows-StartMenu-Programs%"):-File("Quick Shutdown.lnk","%Windows%\_Shutdown.lnk")
app.reg:
Code:
REGEDIT4
[HKEY_LOCAL_MACHINE\Software\Manila_Config QuickShutdown]
"SourcesDirectory"="\\Windows\\resources\\VGA\\"
[HKEY_LOCAL_MACHINE\Software\Manila_QuickShutdown]
"actionShortPress"=hex:00
"BootActiv"=hex:01
"langFile"="\\Windows\\resources\\lang\\lang.english.txt"
"RestartActiv"=hex:01
"ScreenOffActiv"=hex:01
"ShutdownActiv"=hex:01
"SleepActiv"=hex:01
Cooking that package, I have a few problems. When I hold down the power button, it says exe can't be found. So, just to make sure that the visual aspect is working, I try searching for quickshutdown.exe in \Windows and can't find it.
So, what's wrong in my .dat and .reg?
Thanks a lot for the help, this will definitely give me a better understanding of how EXT packages work!
Regards
Smith
First of all, I think that these lines in your app.dat are unnecessary; because when you cook the ROM then the files that are not specified with the path in app.dat land automatically in the Windows folder:
Directory("\Windows"):-File("bootloader.exe","%Windows%\bootloader.exe")
Directory("\Windows"):-File("ConfigQS.exe","%Windows%\ConfigQS.exe")
Directory("\Windows"):-File("DLLSetup.dll","%Windows%\DLLSetup.dll")
Directory("\Windows"):-File("QuickShutdown.exe","%Windows%\QuickShutdown.exe")
Directory("\Windows"):-File("Short_Power.exe","%Windows%\Short_Power.exe")
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Second: All of the lines are wrong. Example:
Directory("\Windows"):-File("QuickShutdown.exe","%Windows%\QuickShutdown.exe")
Click to expand...
Click to collapse
It should be:
Directory("\Windows"):-File("QuickShutdown.exe","\Windows\QuickShutdown.exe")
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Third: Open up the file _Shutdown.lnk in notepad and see if it links to the \Windows\QuickShutdown.exe
Click to expand...
Click to collapse
Maybe you will find something in my post that can help you.
It's much, much easier to do than the way you're trying to do it. First, copying all of those files is really wasteful. If you look at your registry keys, there are paths there for the resource files. Instead of creating a \windows sub-directory, you could just set the path as \windows. Then, the files that are in rom will be used, and you won't need duplicates, or any of the app.dat lines (except for the .lnk).
Change the .rgu to this:
Code:
REGEDIT4
[HKEY_LOCAL_MACHINE\Software\Manila_Config QuickShutdown]
"SourcesDirectory"="\\Windows\\"
[HKEY_LOCAL_MACHINE\Software\Manila_QuickShutdown]
"actionShortPress"=hex:00
"BootActiv"=hex:01
"langFile"="\\Windows\\lang.english.txt"
"RestartActiv"=hex:01
"ScreenOffActiv"=hex:01
"ShutdownActiv"=hex:01
"SleepActiv"=hex:01
Try deleting the DLLSetup.dll-it's really unlikely that you need it. It's just cabinstall information, most likely. Unless you really want all those other lang files, I'd just delete all but the English one. If you cook them all in, it's possible that you'll need to get the others into \windows\lang (it doesn't look like there's a reg key for the lang directory, just for the file being used). I don't know, I've never used the app. As mentioned above, you may also need to fix the path of the shortcut.
You may also want to look into compressing the png files, although it's not really worth it if they're only 1-2 kb each.
This is what I use. I put it together and it worked, so I never did much investigation to see if it could be optimized.
One thing to be aware of ... if you have carrier files which fire provxml, it is possible that the provxml could do something to overwrite the poweroffwarning file here. Same is true if you have a poweroffwarning file getting copied in later in the build process.
Best regards,
-boggsie
Farmer Ted said:
It's much, much easier to do than the way you're trying to do it. First, copying all of those files is really wasteful. If you look at your registry keys, there are paths there for the resource files. Instead of creating a \windows sub-directory, you could just set the path as \windows. Then, the files that are in rom will be used, and you won't need duplicates, or any of the app.dat lines (except for the .lnk).
Change the .rgu to this:
Code:
REGEDIT4
[HKEY_LOCAL_MACHINE\Software\Manila_Config QuickShutdown]
"SourcesDirectory"="\\Windows\\"
[HKEY_LOCAL_MACHINE\Software\Manila_QuickShutdown]
"actionShortPress"=hex:00
"BootActiv"=hex:01
"langFile"="\\Windows\\lang.english.txt"
"RestartActiv"=hex:01
"ScreenOffActiv"=hex:01
"ShutdownActiv"=hex:01
"SleepActiv"=hex:01
Try deleting the DLLSetup.dll-it's really unlikely that you need it. It's just cabinstall information, most likely. Unless you really want all those other lang files, I'd just delete all but the English one. If you cook them all in, it's possible that you'll need to get the others into \windows\lang (it doesn't look like there's a reg key for the lang directory, just for the file being used). I don't know, I've never used the app. As mentioned above, you may also need to fix the path of the shortcut.
You may also want to look into compressing the png files, although it's not really worth it if they're only 1-2 kb each.
Click to expand...
Click to collapse
Great call! Worked immediately! Thanks a lot!
One more quick question. Cooking total commander is being dumb. The EXT I create doesn't have any exe files in the "files" folder, and doesn't extract any into windows. It just isn't working well lol.
Also, what version or what addon enables the user to hold the slash button and bring up the menu where you can hide exit blah blah total commander?
Thanks
Smith
Total Commander is easy to cook in. Again, you don't need app.dat lines, except for the shortcut (make sure it points to windows). Just put the .exe and the plugins (registry, wlan, ftp and webdav, if you have it) in windows. Cook in the reg settings, and you're good to go. I would convert the exe to a module as well.
Farmer Ted said:
Total Commander is easy to cook in. Again, you don't need app.dat lines, except for the shortcut (make sure it points to windows). Just put the .exe and the plugins (registry, wlan, ftp and webdav, if you have it) in windows. Cook in the reg settings, and you're good to go. I would convert the exe to a module as well.
Click to expand...
Click to collapse
So... Create the EXT and recmod without any reg or dat entries except icon and shortcut?
No, include the ghisler reg key (hkcu-software-ghisler). Set it up however you like it (like w/ a fully loaded hotlist). But don't move the files around w/ the app.dat.
Farmer Ted said:
No, include the ghisler reg key (hkcu-software-ghisler). Set it up however you like it (like w/ a fully loaded hotlist). But don't move the files around w/ the app.dat.
Click to expand...
Click to collapse
Huh this isn't working lol could you post the cab you're working with? My cab is acting up (even on fully functional roms)
Farmer Ted said:
Total Commander is easy to cook in. Again, you don't need app.dat lines, except for the shortcut (make sure it points to windows). Just put the .exe and the plugins (registry, wlan, ftp and webdav, if you have it) in windows. Cook in the reg settings, and you're good to go. I would convert the exe to a module as well.
Click to expand...
Click to collapse
Hello Farmer Ted - what for is the file that you attached?
It's a plugin for WebDav, which is the new big thing. I have no clue wtf it does.
Get the ghisler reg key from the device, not the cab. That's always the way to do it. Kheb 1.1 is the way to go for making packages. Cab converters miss a lot of stuff.
Edit: here's my package; it's in oem form (for osbuilder), and it looks like there's a second file needed to get webdav to work in the plugins. Edit the hotlist however you want it (it has folders on my sd card, which are useless to anyone else). It doesn't have a shortcut or initflashfiles.txt in it, since I don't use them for my start menu.
To be more specific about TCMD, here is the output I get with OSkitchen cab to ext:
TCMD>Files
And within the files directory:
000cecmd.002
CECMD_~2.001
00000ftp.003
00000LAN.005
registry.004
TcmObex3.007
TcmObex5.006
So what do I do with those files lol
Regards
Smith
Farmer Ted said:
It's a plugin for WebDav, which is the new big thing. I have no clue wtf it does.
Get the ghisler reg key from the device, not the cab. That's always the way to do it. Kheb 1.1 is the way to go for making packages. Cab converters miss a lot of stuff.
Edit: here's my package; it's in oem form (for osbuilder), and it looks like there's a second file needed to get webdav to work in the plugins. Edit the hotlist however you want it (it has folders on my sd card, which are useless to anyone else). It doesn't have a shortcut or initflashfiles.txt in it, since I don't use them for my start menu.
Click to expand...
Click to collapse
Thank you for sharing the package.
Farmer Ted said:
It's a plugin for WebDav, which is the new big thing. I have no clue wtf it does.
Get the ghisler reg key from the device, not the cab. That's always the way to do it. Kheb 1.1 is the way to go for making packages. Cab converters miss a lot of stuff.
Edit: here's my package; it's in oem form (for osbuilder), and it looks like there's a second file needed to get webdav to work in the plugins. Edit the hotlist however you want it (it has folders on my sd card, which are useless to anyone else). It doesn't have a shortcut or initflashfiles.txt in it, since I don't use them for my start menu.
Click to expand...
Click to collapse
Thanks for your package, much appreciated! This thread has taught me a lot about how ext's work
Do you know what all those strange files I talked of 2 posts up are though? Like, how do I put those all together?
Regards
Smith
smithisize said:
Thanks for your package, much appreciated! This thread has taught me a lot about how ext's work
Do you know what all those strange files I talked of 2 posts up are though? Like, how do I put those all together?
Regards
Smith
Click to expand...
Click to collapse
I'm not sure what the technical name is, but those are the raw files from the cab; if you extract the cab with winzip or 7-zip, that's the file names. If you give them the proper extensions (.dll, exe, etc) then you can recover the proper files. It looks like the unpacking didn't work properly.
Farmer Ted said:
I'm not sure what the technical name is, but those are the raw files from the cab; if you extract the cab with winzip or 7-zip, that's the file names. If you give them the proper extensions (.dll, exe, etc) then you can recover the proper files. It looks like the unpacking didn't work properly.
Click to expand...
Click to collapse
Ah! You're right thanks a lot lol that's where my confusion was stemming from lol I couldn't figure out what to do with them!
Thank you very much!
Regards
Smith