HI ALL
For a week I bought an HD HTC T8282. I've found that GPS does't work. I installed IGO 8.3.2. These version I used it on a HTC P 3600 and it worked great. Now on HD, the application is open but not connect. When GPS is enabled, application displays the following message: "Can not find the GPS receiver.
You can help me with some advice?Is a problem with the operating system? I have a WM 6.5.3.
Thanks.
gtdor said:
HI ALL
For a week I bought an HD HTC T8282. I've found that GPS does't work. I installed IGO 8.3.2. These version I used it on a HTC P 3600 and it worked great. Now on HD, the application is open but not connect. When GPS is enabled, application displays the following message: "Can not find the GPS receiver.
You can help me with some advice?Is a problem with the operating system? I have a WM 6.5.3.
Thanks.
Click to expand...
Click to collapse
Software information:
ROM VERSION: GRID EWO 1.4
RADIO VERSION : 1.14.25.24
MANILA VERSION: 2.5.19211619.0
Try to change the radio as I remember som of them with GPS disabled acording to some cantries was preventing the GPS
abo3bdo said:
Try to change the radio as I remember som of them with GPS disabled acording to some cantries was preventing the GPS
Click to expand...
Click to collapse
THANK YOU, YESTERDAY I solved the problem DOING exactly what you write, and I solved with Cloudy 1.9-0. thanks for the tip.
:
Related
I just upgraded to udK Diamond R2 - WWE (Build 19588.1.1.4) on HTC Cruise (polaris) , and when I try to use Bluetooth, I get an error : "No BT hardware installed on this device".
I did few soft resets, but same problem.
Any idea how to solve it? should I try another ROM version?
thanks in advance
The fix should be here
http://forum.xda-developers.com/showpost.php?p=2213180&postcount=1
works great. thank you
works great. thank you.
Hi all,
i've a problem and i think that this is the only plase where find one possible solution!!
My Citroen have a bluetooth module that work fine with an HTC Tytn but Cruise.
With my new Cruise, the bluetooth are able to accept fine only the first call: after this, the next will switch off the audio (in fact i need to put my phone on my ear!!)
i've tried to change firmware and some radios without results! Can anyone help me??
I had this problem a few times with my Cruise working with the stock rom (WM6) and my Parrot CK3100, after upgrading to WM6.1 (udK Diamond) i never had the problem again. Im still working with my stock radio rom btw.
Thanks!! Can you send me link for downloading rom that you say, traslate in italian??
Ok...i've installed udK Diamond R4 WWE and i've saw some changes on my car but....voice calls have the same problem!
So, if i've undestood right, the problem is on the s.o. firmware and not on radio firmware??
fabrysious said:
Ok...i've installed udK Diamond R4 WWE and i've saw some changes on my car but....voice calls have the same problem!
So, if i've undestood right, the problem is on the s.o. firmware and not on radio firmware??
Click to expand...
Click to collapse
Wait a little while until WM6.1 official for polaris is available that will hopefully solve all problems with bt...
uh?? WM6.1 will be released?? When??
But do you think that is the version of WM that create my problem? I've tried with a TYTN with WM6.0 and it is working fine!
Did you try your offical rom with the new HTC bluetooth fixes?
http://forum.xda-developers.com/showthread.php?t=400752
NO!! Thanks!!!
Where can i find official rom for my italian cruise?? Or i can apply those patches to all firmware?
Offical HTC ITA rom
ftp://xda:[email protected]_radio_sign_25.65.30.04_1.58.21.23_Ship.exe
I suggest first try the fixes with the offical rom....
If it works, try them with the cooked roms...
...it didn't work!! I've installed original rom and after i've applied those two fixes without any result!
Do you have another idea for me? i'm desperate!
Hi,
I had a almost same issue with original ROM and with SONY MEX-BT2500 autoradio. It works fine with handsfree BT profile but with A2DP (stereo via BT) it worked only on first connect (disconnect after engine stop and start). I found 2 solutions:
1) after "engine restart" press number 6 on radio - it connects again to Cruise
2) flash ROM to Bepe 0.67 - it reconnect automaticaly.
...now I flashed ROM to udK Diamond R4 and I am using 1)
Hi all.
I've just install WM 6.5 and is work perfect exept GPS. I used a IGO 8. In WM 6.5 System I have external GPS. Can anybody tell me what setings I have to make to external GPS to make it work.
GPS program port???
GPS hardware port???
TKS
Need Some more information:
Device name/type?
Radio version?
Igo Vers.
WM6.5 version+cooker
Try to upgrade radio to 1.56.70.11 (latest)
By default internal GPS settings are --- COM:9 and Baud:115200
I have a SPV-M700 (HTC P3600), i've upgraded to WM6.5 (TRIN_WM6.5__3_00_707_53__B23002) & Radio 1.56.70.11, Igo 8(8.0.0.31442) and works fine.
Hi!
my firmware is of version 1.93.
i can't update to version 2.0 because igo8 won't run anymore under this version. but i really like the slider for answer/ignore when there's an incoming phone call.
is there a possibility to get this slider for my 1.93 firmware?
thanks in advance
hebbe said:
i can't update to version 2.0 because igo8 won't run anymore under this version.
Click to expand...
Click to collapse
iGO runs great also under wm 6.5 and 2.09 drivers...
JJKameR said:
iGO runs great also under wm 6.5 and 2.09 drivers...
Click to expand...
Click to collapse
on my device unfortunately not. i updated my firmware to vesion 2.0. igo8 e.g. crashed everytime i wanted to set an address for destination. i couldn't get it to work. since i donwgraded to version 1.93, igo8 runs fine again.
I suppose you are using a very old iGO version.
Maybe it's time for an upgrade.
Slide 2 Answer for 1.93 - http://forum.xda-developers.com/showthread.php?t=464286
hi!
since i flashed deepshining 8.3 with winmobile 6.5, iGO 8.0.0.54000 doesn't work anymore. when i tap search->address and then after entering the street number, iGO freezes and can't be used anymore. this also happens after a soft-reset or running clean ram before starting iGO.
does someone have a working iGO8 on his diamond with winmobile 6.5? which version exactly do you use then? and can i use my iGO 8.0.0.54000-maps with a newer iGO8 version?
thanks a lot for your answers
I have the same version running on my phone and have been using it on many WM6.5 ROMs. Never had a problem with it. You cannot use the old maps on the newer version of iGO8.
Dom1n8tr1x said:
I have the same version running on my phone and have been using it on many WM6.5 ROMs. Never had a problem with it. You cannot use the old maps on the newer version of iGO8.
Click to expand...
Click to collapse
thanks for your answer.
so what might it be then, that iGO won't run anymore? using winmobile 6.1 and rom version 1.93 my iGO worked perfectly.
maybe i should try a newer version?
The problem may be with that specific rom, I suggest you try a rom from a different chef.