Database Users

Clock & Alarma - can not breake alarm

Someone cann help me:
1. When I make software reset on my MDAPro (Universal) my Universay all time play alarm - about 20 min and then stoped and
2. After then, when I switch on alarm, then (when alarm played) I canot see message to switch off alarm??? And I canot switch off alarm.
Alarm stoped about last 20 minits.

Alarms
Try memmaid (search forums for memmaid and alarm for precise solution)
You need to run memmaid and look at the notifications, and delete the "alarm" ones as they have got "stuck"

Yes, I had this problem also. You can perform a hard reset, that will solve it but then you loose all your data and it is a pain! So I spent all day trying to find out how to fix it without doing a hard reset, and here are the results:
1. Open the Clock & Alarms app, and click on the Alarms tab. Make sure everything is unticked and unselected.
2. Install and launch MemMaid (http://www.dinarsoft.com/ - Note: MemMaid is shareware that expires after something like 30 days, or you might use another app which allows you to edit the notifications queue), and then press the Jump To softkey and click on the the Notification Queue option.
3. Press the Find Duplicate button, and make sure you say yes to deleting all duplicates.
4. Now you have to scroll through the list slowly, you must find all the ones which have this text in them and check the tickbox: \Windows\clock.exe.
5. Now you have located the rogue alarm notifications and ticked them, press the Delete button and confirm in the next step. Make sure you have NOT ticked/selected any other notifications except the clock.exe ones before you do this step, otherwise it can easily make your phone stop working!
6. Soft reset your device. When it has finished booting, you should notice that it doesn't vibrate madly with alarms for 20 minutes like it used to do before, and you should have a flashing green LED on the right instead of orange
7. Stop using the built-in clock & alarms app if you don't want this to happen again - it is too buggy! Find a replacement alarm app, there are loads of free ones out there!

Thanx all! Specialy to sl9
THANK YOU!!! NOW IS ALL GOOD !
What you mean:
"Find a replacement alarm app, there are loads of free ones out there" (I canot see "there" link for free app).
For all:
Which alarm app you use (whithout bugs) ?
1. SPB Clock
2. Chronos for PPC v. 2.95
3. Phonealarm v 1.52
4. Pocket Clock v. 1.15
or some another app ?

I actually haven't got round to finding a replacement yet, but one thing is for sure: do not use the HTC alarm built-in app any more
I am glad this solution worked for you without hard reset, I could not find anywhere else exactly how to solve this problem so it took me literally a whole day of experimenting - but with good results

message/mail notification not working

does vibration or popup notification of new messages/new mail work (both active and sleep state) on touch hd?
i do not get anything even i set it accordingly in the notification settings. all i see is a number pop up in touch flo tabs. deactivating touch flo does not help either.
any ideas?

Same problem here.
It worked sometimes, not it doesnt anymore and I dont know why (perhaps a confict with a program??).
Ascenca

sms notificatian not working anymore.
Same her not working anymore

its a bug that has been there since the HTC Diamond

fix?
anyway to fix it?

Please Help.
I cant live without sms notification!

There is a Registry tweak for the Diamond that fixes this - it should work on the HD too :
HKLM\Drivers\BuiltIn\RIL\DisableSMSWakeUpEvent
set to "1" by default. meaning NO wake up to SMS message
set to "0" to enable wake up
EDIT : This was referenced from a Thread on the Diamond Forum
EDIT : Actually, having re-read your problem, this may not fix it - sorry.

brodos123 said:
I cant live without sms notification!
Click to expand...
Click to collapse
Hd Tweak allows you to turn sms notification on.
Also make sure you have done
start--->settings--->phone---->services
then click on voice mail and text messages and then get settings.

Missing New Mail Missed Call Notification
I have the same problem phone does not display an new message or missed call icon in the upper tray. Seems to have happened after using HD Tweak and trying to hide the battery Icon, which is now in place of where the New Mail or Missed Call Notification Icon is normally displayed.
Anyone else expereincing this problem and any ideas for a solution?
Thanks.

Notification Problem Solved
Disconvered that I had an extra battery icon in upper tray from SPB plus. Removed thatand everything is now working fine.

My partner received his shiny new HTC Touch HD last week and after a few hours realised it was giving no notifications of text messages. Absolutely nothing as people have described here! It was new out the box and was making no noise, no notification on the Touch Flo, not even the standard Windows Mobile icon at the top. We tried every setting we could think of, and passed it to a friend whose had his HD for a couple of months now, who also couldn't find any good reason for its silence.
We gave in and hard reset the device (since it was only a couple of days old and he had yet to fill it with stuff!)
I'm glad to say, the hard reset solved all! No idea what the problem was, but it now gives all the correct notifications and obeys settings.
Just thought I'd share this in case others happen upon this problem since the thread gave us hope (in that others had the same problem) but no solution. I realise a hard reset isn't an elegant solution, but it did fix the problem

Fixed mine
Pauls suggestion for the diamond worked for me. My Touch HD running Energy ROM (WM6.5). I hadn't even noticed since my last ROM upgrade (i pressume) but my phone only alerted me to a new SMS when I had it switched on (not in stand-by). When I did notice I checked all the settings I could find for alerts and notifications, sms etc. The following registry tweeks fixed mine:
Paul.Ferrari said:
There is a Registry tweak for the Diamond that fixes this - it should work on the HD too :
HKLM\Drivers\BuiltIn\RIL\DisableSMSWakeUpEvent
set to "1" by default. meaning NO wake up to SMS message
set to "0" to enable wake up
EDIT : This was referenced from a Thread on the Diamond Forum
EDIT : Actually, having re-read your problem, this may not fix it - sorry.
Click to expand...
Click to collapse

Klaxon confusion?? can u help

Hi all
I'm trying out Klaxon alarm clock.
Can anyone tell me the purpose / function of the "bell" button (bottom 2nd from right in attached image).
When I'm setting up an alarm, clicking on it just toggles making it lit up/not. If I press the play button it always plays an alarm tone (beep) whether the bell button is pressed or not. Very confusing and as usual with all these little apps there is no manuals or instructions anywhere.
Thanks for any help

Bell icon in klaxon
When bell icon is 'lit' it means the alarm is active. When bell icon is 'unlit' it means alarm is inactive.

Thanks for the reply qai5er
Stil confused. If I go in an edit /create a new alarm, why would I want to make th ealarm inactive???? Isn't that a bit of an oxymoron ?
Also, when I click on the "play" button it plays an alarm beeping regardless of whether the alarm is active or inactive. Surely if I make the alarm inactive, then the play button should play nothing and perhaps tell me "nothing to play, alarm inactive"...??

also as well as the questions above, can anyone tell me what the items mean on the alarm config page . . .
Snooze (min) I assume this is the snooze time
Expire (Min) - what is this?
Delay (Sec) - what is this?
Many thanks to anyone who can help

gt112 said:
Thanks for the reply qai5er
Stil confused. If I go in an edit /create a new alarm, why would I want to make th ealarm inactive???? Isn't that a bit of an oxymoron ?
Click to expand...
Click to collapse
No, it is'nt. This is an important feature to me at least. Just because I have set up the alarm does not mean that there is'nt situation when I do not need it. Let me give you an example. I may have an alarm to remind me to pick up my children after school. During school holidays, I would make it inactive, and I would reactivate it when the school starts. I could delete it during school holiday and recreate it I suppose but that's too troublesome.
You might find good use of this in the future.

Since Klaxon seems to work witout any problems on your devices I was wondering if you could tell me which settings you chose.
I have installed Klaxon and checked all boxes in the settings-menu, but the alarm won't work.
Instead of the Klaxon alarm the standard WM-alarm start at the specified time, but ends after a few seconds by itself (probably because Klaxon wants to start its alarm?).
Could you give me any advice?
TIA
Bacardi Man

and I repeat my previous questions incase they get lost in the conv
can anyone tell me what the items mean on the alarm config page . . .
Snooze (min) I assume this is the snooze time
Expire (Min) - what is this?
Delay (Sec) - what is this?
Many thanks to anyone who can help

Bacardi Man said:
Since Klaxon seems to work witout any problems on your devices I was wondering if you could tell me which settings you chose.
I have installed Klaxon and checked all boxes in the settings-menu, but the alarm won't work.
Instead of the Klaxon alarm the standard WM-alarm start at the specified time, but ends after a few seconds by itself (probably because Klaxon wants to start its alarm?).
Could you give me any advice?
TIA
Bacardi Man
Click to expand...
Click to collapse
I kinda have the same problem..the klaxon alarm works, the music starts but ends after a few seconds only vibration goes on and on.. =S
does anyone have the same problem?

Try to disable the light sensor.

hehe yeah I already found out myself, stupid me
but thx for the fast reply!

What does the options "Integrate with TouchFlo3D" and "Forcibly remove windows Alarm" do?
I see no difference in touch flo nor in the normal windows alarms. Even if I touch clock in touch flo windows alarm is opened.

Surfer_D said:
What does the options "Integrate with TouchFlo3D" and "Forcibly remove windows Alarm" do?
I see no difference in touch flo nor in the normal windows alarms. Even if I touch clock in touch flo windows alarm is opened.
Click to expand...
Click to collapse
None - it doesn't seem to work.
However, I've installed SSMapa (2 files copied into /windows and then when opening up settings I get 2 questions - accept these). Second - start SSMapa, do an init, find time / clock and set up program exactly as typed:
/Program/Klaxon/Klaxon.exe
Set directory:
/Program/Klaxon
Chose save. Then deploy. You get 2-3 worrysome questions about removing signed exe files - answer yes. Restart device for simplicity sake or wait a moment and you'll get 2-3 questions about MP???.exe answer yes. Now you have Klaxon integrated completely into your interface. Meaning that when alarm sounds, Klaxon pops up. When you click the time - Klaxon is opened. No more useless WM time settings.
"The best with windows mobile is when you don't know you have it"

robned said:
None - it doesn't seem to work.
However, I've installed SSMapa (2 files copied into /windows and then when opening up settings I get 2 questions - accept these). Second - start SSMapa, do an init, find time / clock and set up program exactly as typed:
/Program/Klaxon/Klaxon.exe
Set directory:
/Program/Klaxon
Chose save. Then deploy. You get 2-3 worrysome questions about removing signed exe files - answer yes. Restart device for simplicity sake or wait a moment and you'll get 2-3 questions about MP???.exe answer yes. Now you have Klaxon integrated completely into your interface. Meaning that when alarm sounds, Klaxon pops up. When you click the time - Klaxon is opened. No more useless WM time settings.
"The best with windows mobile is when you don't know you have it"
Click to expand...
Click to collapse
I have tried this but I cannot seem to find Klaxon.exe whether it is installed on my device or on my Storage card, I am not sure what to do.
Nevermind, got it working after LOTS of messing around

at least 2 people have now said that they managed to sort it out, but didn't explain how they did it.
to the people who are now able to use klaxon as a normal alarm, can you please share what settigns you had to change to get the alarm to play (say, a mp3), and then snooze for x minutes ?
thanks

I ended up uninstalling it as it was too unreliable. It was a bit slow to start up and also the alarm always went off late when integrated with TouchFlo (not sure if S2U2 was causing this). Back on the standard alarm now and it actually goes off at the right time now, which is a bonus.

gt112 said:
and I repeat my previous questions incase they get lost in the conv
can anyone tell me what the items mean on the alarm config page . . .
Snooze (min) I assume this is the snooze time
Expire (Min) - what is this?
Delay (Sec) - what is this?
Many thanks to anyone who can help
Click to expand...
Click to collapse
I guess that the Expire is the how long the alarm wanto keep snoozing.
Let say yr snooze time is 5 mins. And yr expire time is 30 mins. Means it will only snooze for 6 times.. then it expired..

sbirsen said:
at least 2 people have now said that they managed to sort it out, but didn't explain how they did it.
to the people who are now able to use klaxon as a normal alarm, can you please share what settigns you had to change to get the alarm to play (say, a mp3), and then snooze for x minutes ?
thanks
Click to expand...
Click to collapse
U can chooose the ringtone (MP3) from the 'sound logo' which is left to the 'Play' logo. From there u go search for yr MP3 file from yr folders. But remember to lit up the 'bell' logo or else it wont sound. Also pls close the light sensor which i found it is troublesome which yr alarm wont sound after 1st snooze.

robned said:
None - it doesn't seem to work.
However, I've installed SSMapa (2 files copied into /windows and then when opening up settings I get 2 questions - accept these). Second - start SSMapa, do an init, find time / clock and set up program exactly as typed:
/Program/Klaxon/Klaxon.exe
Set directory:
/Program/Klaxon
Chose save. Then deploy. You get 2-3 worrysome questions about removing signed exe files - answer yes. Restart device for simplicity sake or wait a moment and you'll get 2-3 questions about MP???.exe answer yes. Now you have Klaxon integrated completely into your interface. Meaning that when alarm sounds, Klaxon pops up. When you click the time - Klaxon is opened. No more useless WM time settings.
"The best with windows mobile is when you don't know you have it"
Click to expand...
Click to collapse
does this work with htc hd 2 and htc sense?
because it says only touchflo 3d and not htc sense?
thanks for the answer
cheers

Notifications

Hi,
I am not being notified by an alert sound when I get am sms or voicemail or any of the notifications.
I believe everything is turned on to make the tone sound but it's silent. I am getting the notification in the with the flashing green LED and the notification icon in the title bar.
Please don't tell me I have a fault!! Grateful for any help.
Thanks

Same issue here.
Hard Reset solves it.
I found what trigger this problem for me is installation of a language pack.
I've read somewhere that someone said what triggered it for him was something about playing with location (country). What I saw is that after I install the language pack, my location is changed too (when I check in regional settings). Maybe this is the trigger...

I solved this by going into the Windows interface which can be damn tricky without a stylus!!
My Sense UI wasn't picking up the Windows settings, so the notifications were ticked in Sense but not in WinMo, and WinMo was the setting being used.
Possibly a fault with the Sense UI??
Thanks

Hi can you tell me how you mangaed to solve this
because i have been through the phne with a fine tooth comb and i cannot get that sms sent notification to work.
On closer inspection of the registry i do no think there is even a string for the notification (HKCU/ControlPanel/Notifications ect.
In the windows sound settings there are settings for sent MMS but not Sent SMS or Sent Message.
On My old Blackstone it seems there ere far more notification options to be enabled or disabled as you wish. If anyone has an idea what string or information we could add to the above registry setting then i think we might have nailed it?
HTC are you listening

Cab named AA AA anyone know what it is? [SOLVED]

Hi all,
When I look at "home" I see that Alarm is disabled. When I click the alarm button it opens the settings for my alarms, and they are enabled!! But when I go back to the home page its still disabled I've tried adding a new alarm and setting it to "on" but they still keep being disabled, thus making my alarm function not working. It has been like this the entire week, and thats why I haven't heard my alarms, making me late for work
I've got vovicheck, dragon_soft dot clock, brians V6 test 1(extra icons on home), HD wallpaper, disabled current location (though not working), touch x remove top curtain, dragon soft manilla calender text removal, and some other stuff, but I haven't installed any alarm cabs (to my knowledge) I've only added some ringtones in my alarm folder, and those are working - I don't understand this
EDIT: see my last reply.
Any help would be very much appreciated.

I've tried deleting calender text removal, and calender transparant, but that doesn't help. Really annoying

Seems to work now after I deleted something called "AA AA" can't remember what cab that was, but it's definetely not the original cab name. Not totally sure though? Anyone know what AA AA, is??

Seems to be the cab called "Clock- Transparency.cab" that messes the alarm function up. Sorry for spamming the forum