Hi guys, I'm new to windows devices I keep looking through every thread i can find regarding custom Roms. I know I need a HardSPL but the SPL my phone came with originally was 2.10 and everything I can find says I either need a 2.7 or 2.8 SPL. Is there a way I can downgrade my SPL or is there something else I can do to be able to get the HardSPL.
find tmous rom 2.10.0
flash it from sd card
spl is now 2.08.0000 and hspl 1024 will work.
Thank you. I searched everywhere and couldn't find a definite answer. Worked great.
Related
Hello, all, i have stock 1.14 rom, where can i find an hspl for this rom. Anything, that can put hspl on this rom plz/ Please help, new to this forum..
Elite_ said:
Hello, all, i have stock 1.14 rom, where can i find an hspl for this rom. Anything, that can put hspl on this rom plz/ Please help, new to this forum..
Click to expand...
Click to collapse
Here you go mate. Bottom of first post in this thread. Don't forget HSPL 1.14 is only to be used used on roms based on pre 1.56, i.e. everything before 1.56. You will need to use HSPL 1.56 for all roms based on 1.56+
Thxs mate, as i said am new, a bit confusing.. U refered me to the site, but, it says "New version will work on SPL 1.54 or above ROMS ". so what should i do ?
Elite_ said:
Thxs mate, as i said am new, a bit confusing.. U refered me to the site, but, it says "New version will work on SPL 1.54 or above ROMS ". so what should i do ?
Click to expand...
Click to collapse
SPL 1.54 and a rom based on 1.56 are 2 completely different things.
What rom are you trying to flash? If its just for a stock 1.14 rom then all youi need is HSPL 1.14
There is also this dummies guide fore flashing 1.56+ roms
OMG, am sorry, didnt know about the 'unsigned' before, doing the update now, thxs /
I used the unsigned version to flash my stock 1.14 rom , it became olinex, all were good. but when i used the energy rom[standard] from NRGZ28, it went ok but my blackstone screen is messed up with colours , everthing is wrong concerning colours.. What should i do ? I also wanted to do a hard reset but its not working !! I dunno what to do / plz help
Elite_ said:
I used the unsigned version to flash my stock 1.14 rom , it became olinex, all were good. but when i used the energy rom[standard] from NRGZ28, it went ok but my blackstone screen is messed up with colours , everthing is wrong concerning colours.. What should i do ? I also wanted to do a hard reset but its not working !! I dunno what to do / plz help
Click to expand...
Click to collapse
As I stated above you need to use the correct HSPL for whatever rom your using. If you want to use latest NRG rom you need to use HSPL 1.56. If your use incorrect HSPL you get colour distortions and unable to connect to make calls etc etc
Upgraded to latest hspl , and everything is fine.. Thxs//
No probs, just glad you got it sorted
Flashing Radio guide !!!!
Fallen Spartan said:
No probs, just glad you got it sorted
Click to expand...
Click to collapse
Hi,
I couldn't find any detailed guide about flashing radio ...
I want to put 1.09 radio (that came in a 1.14 rom) in my HD that have 1.14 stock spl but now have Miri 21882 rom that entered there with USPL GUI v 2.5 ...
Now I must use USPL GUI v 2.5 again to flash the radio ?
May I just have to flash the radio because my SPL is 1.14 and radio 1.09 came from a 1.14 rom ?
Is possible put any radio in any rom ???
I did not find any guide for that !!!
Help !!!
Thanks.
Marne Jr said:
Hi,
I couldn't find any detailed guide about flashing radio ...
I want to put 1.09 radio (that came in a 1.14 rom) in my HD that have 1.14 stock spl but now have Miri 21882 rom that entered there with USPL GUI v 2.5 ...
Now I must use USPL GUI v 2.5 again to flash the radio ?
May I just have to flash the radio because my SPL is 1.14 and radio 1.09 came from a 1.14 rom ?
Is possible put any radio in any rom ???
I did not find any guide for that !!!
Help !!!
Thanks.
Click to expand...
Click to collapse
It is possible to put any radio on any rom...yes. Just re-use USPL and then flash radio. A number of roms come with radio's included. If you do not want this radio, after you have flashed rom, just re-use USPL again and flash your desired radio
Hi i already bricked one touch hd,with is now on the graveyard...And before i brick my second one i want to know what rom i can use.
I just uspl my rom so it says now spl-1.15.uspl
what rom can i use? And mabey it's easyer to split the rom in sections for lets say hspl roms,uspl roms spl roms because now it's a kind off a mess in the rom section...agree?
so what rom can i use now with my spl 1.15 uspl version so that i don't brick my second(new) blackstone
thnx for the answer.
ps i prefer dutch rom,but wwe is good also.
regards stef
With spl 1.15 you can only use some of the older stock roms and probably only those that are available via the htc website. You will need to put in your imei number and only if there is an upgrade can you change roms.
Any other rom (and specifically the cooked roms) will require you to go with either hspl or uspl. There are no roms that are hspl only or uspl only. The choice is up to you as to which route you want to take. Therefore there is no need to sort the roms in the forum into those categories. The only choice you need to make is do you want wm 6.1 or 6.5 and do you want manila 2.1 or 2.5. These are only choices that you can make and once you have successfully installed hspl or uspl you can try a few to see which you prefer. Read this thread VERY carefully and then read it again. If you then have any more specific questions post them there and you will get better help.
What did you do previously to brick your phone, as using hspl or uspl or even flashing the wrong rom for that matter shouldn't brick the phone?
thnx for your replay
it works now..i'ff read twice the forum.I have uspl(so no permanent spl)and flashed mikenficent rom. It works great.
on my other phone i did hspl and that worked,but at one time it did gife me a lot off trouble (starting up and wrong colors) then i send it back to htc,and it had no waranty anymore..so i didn't let it repair.Afther i get it back..it did not start att all,so i think htc did something to brick it even more.
now i wrote about the USPL and tryed that. and now it workes smouthless...
regards stef
If you had the wrong colours before then something must have gone wrong with the hspl, because that is a typical symptom of the wrong spl for the rom you were using.
But anyway at least you have gotten a new phone. Look after it now
lol..i will NEVER use hspl again..because the software is never 100% sure.
and with uspl it works like charme...
my new touch hd is the one i stole from my wife..lol and i give her a nice MDA compaq V
so she is happy and i'm happy..lol
only thin i hope is there will be one time an android rom(not the one booting with haret(ok that works but is to slow...
regards stef
The first time I flashed mine I did HSPL with Laurentius L26 from the computer (not the storage card), and then Dutty R14, and then Xannytech, and it's always worked perfectly.
Will there ever be any ROMs for 2.13 so we don't have to downgrade?
SPL 2.13? Do you mean SPL 2.10, on Stock ROM 2.13? You can actually just downgrade by flashing stock 2.10.1 via USB...as long as the ROM contains SPL 2.08.
Confused?....there's a pretty easy guide to follow on the front page. And to answer your question, the ROM has nothing to do with the version of SPL on your phone.
SPL is like a gateway on your phone. The stock SPL has pretty strict regulations: HSPL (what you flash over the stock SPL with) is like an open door. It allows you to flash whatever ROM you choose on your phone.
So no, there probably will never be any custom ROM's specifically built for SPL 2.10 because the ROM and SPL/HSPL version are two very different independent things.
~Jasecloud4
Got it. I tried that HSPL and flashing from SD without, also HSPL2 and couldn't get it to work. My stock ROM is fast after I made my registry tweaks. Don;t really see to much of a use to really spend allot of time on this since most custom roms are eye candy.
Hello
First of all I have to tell you all that I have read almost every page on the forum and tried to follow every step but it ends up with a new thing to install. I need a guide from the beginning.
I have a swedish HTC Leo HD2 from sweden
PB81100
SPL 3.03.000
ROM-version 3.14.413.2 SWE
Radioversion 2.15.50.14
From what i can understand i need to install.
A rom from the beginning that supports 576 MB and radio.
I need to install HSPL
I need to install MAGLDR 1.11
Then i need to install MDJs_CyanogenMod7_v.2.6_NAND_A2SD+
The problems I have from the beginning is that i cant find a rom that supports 576 MB radio. And I have such a high SPL 3.03.000 so I cant install HSPL. So the bootloader MAGLDR 1.11 wont install and I am stuck.
So please guys will you help me with a little guide how I shall do this and link to the downloads I need.
Much Appreciated Goran
You need to go to HTCs website and download an earlier version of the 3.14 ROM - 1.66 (HTC) or 1.72 (if it is branded). You will need to use your phone's serial number to download the ROM.
Flash the ROM. Now your SPL will be 1.66.0000
Now you can run HSPL2 and select 2.08.HSPL
Download the 2.15.50.14 RADIO (look in the WinMo6.5 ROM sectrion on here for it) and flash the RADIO.
It is now ready to start the WP7 flashing process.
Pay Attention!!!!
goran.mitrovic said:
Hello
First of all I have to tell you all that I have read almost every page on the forum and tried to follow every step but it ends up with a new thing to install. I need a guide from the beginning.
I have a swedish HTC Leo HD2 from sweden
PB81100
SPL 3.03.000
ROM-version 3.14.413.2 SWE
Radioversion 2.15.50.14
From what i can understand i need to install.
A rom from the beginning that supports 576 MB and radio.
I need to install HSPL
I need to install MAGLDR 1.11
Then i need to install MDJs_CyanogenMod7_v.2.6_NAND_A2SD+
The problems I have from the beginning is that i cant find a rom that supports 576 MB radio. And I have such a high SPL 3.03.000 so I cant install HSPL. So the bootloader MAGLDR 1.11 wont install and I am stuck.
So please guys will you help me with a little guide how I shall do this and link to the downloads I need.
Much Appreciated Goran
Click to expand...
Click to collapse
Hey you dont need to flash HSPL2, search for the HSPL3 and flash that one after following fred_up's instruction and magldr 1.11 dont work for wp7 you need to flash 1.12 before you can flash wp7 into your hd2 dont forget that is the only bootloader that works for windows phone 7 dude, be care, dont brick your phone, dont forget to hit the "Thanks Button" happy flashing
When i tried to download from HTC an older ROM they say that my S/N is invalid. I dont know why. Can anyone upload the rom i need?
goran.mitrovic said:
When i tried to download from HTC an older ROM they say that my S/N is invalid. I dont know why. Can anyone upload the rom i need?
Click to expand...
Click to collapse
I think the stock rom should be there in the wiki
So I have a tmobile HD2 with Rom 2.10.50.26 and SPL 2.10. I really want windows phone 7 to run but I cant figure it out. I cant load HSPL because it says I need spl 1.4 but I cant seem to change it. Sorry if this is in the wrong section but I am new to the forums. If anyone can help me with the steps that would be great. thanks again