Related
Hello, I decided to try to port a SYS from a spanish wm6.1 rom from diamond, so I started to read tutorials, but the result was the spected, failed...
Here are my steps:
I took the last diamond spanish rom [1.93.412.1]. I got Os.nb using nbhextract, splitted it with nbsplit (with -kaiser argument) and dumped the payload file with imgfsfromnb and imgfstodump. But I wasn't able to separate the dump in sys and oem folders with dmp2pkg (it returned me errors), so I repeated the process with an older diamond rom [ 1.37.412.2 ].
With that rom, I was able to extract the sys and oem folders. Also, I got xip.bin using rommaster tool ("RomMaster -w 5 nk.nba -x -o xip2.bin >NUL") and dumprom (dumprom xip2.bin -5 -d XIP >NUL).
I dumped the xip.bin and made pkgs with xipport.
Using the DIY kitchen, I copied the four folders from xipport (LangDB, MSXIPKernel, MSXIPKernelLTK and WinCENLS_WWE) to ROM\XIP. Following this xda tutorial I copied the .VM folder from my old sys folder to the SYS from diamond. For the OEM folder, I used my dumped OEM folder from my Spanish pharos.
Finally, I built all and flashed. It started, but when it is loading WM at the green screen, it was cropped (needs VGA to QVGA fix). After this screen, it showed a gray screen, and it doesn't worked.
Can anyone show me the errors or some links to try again?
Thanks
hi jose_sonseca, DIY kitchen don't include xip porting tool so you must do it manually using xipport.
poldo964 said:
hi jose_sonseca, DIY kitchen don't include xip porting tool so you must do it manually using xipport.
Click to expand...
Click to collapse
Good tutorial, but I got stuck on one step:
Code:
Prepare MSXip donor
Dump your donor XIP.bin (from 20758 build)
What's "donor xip"? Searching the forum, I found some references, but no downloads for it or descriptions. It must be dumped from a rom? or how can I get it?
My original diamond rom build is 19965.
Another question: some applications have DPI192 written on their folder's name in the sys folder (like windows live), so they must be vga versions, so how can I adapt them?
Thanks
... is the xip that you want to port.
Keep in mind that the addresses offset for our pharos are not the same.
The XIP start address is 00313800 and the OS start address is 00666000.
I suggest you to use my metod to insert xip_out.bin in the OS.
So, I must follow the xipport tutorial until I get xip_out.bin.
But, after that, where should I insert xip to?
I think that the MSXIPkernel and OEMXIPkernel should be inserted in SYS (ported) and OEM (original) folders in the DIY. Is it correct?
Another thing, in the xipport tutorial, it says I should delete some files from the new xip , but hd.dll.imageinfo.txt and osaxst0.dll.imageinfo.txt aren't present in the diamond xip dump. Is it normal?
jose_sonseca said:
So, I must follow the xipport tutorial until I get xip_out.bin.
But, after that, where should I insert xip to?
I think that the MSXIPkernel and OEMXIPkernel should be inserted in SYS (ported) and OEM (original) folders in the DIY. Is it correct?
Click to expand...
Click to collapse
No, you must insert the xip in OS.nb located in "\build\ROM" folder of DIY tool.
Remember that you must port only MSXIPkernel (files and modules), OEMXIPkernel contains a device specific modules and files so dont touch it
Another thing, in the xipport tutorial, it says I should delete some files from the new xip , but hd.dll.imageinfo.txt and osaxst0.dll.imageinfo.txt aren't present in the diamond xip dump. Is it normal?
Click to expand...
Click to collapse
yes if this xip is already ported from another device
poldo964 said:
No, you must insert the xip in OS.nb located in "\build\ROM" folder of DIY tool.
Click to expand...
Click to collapse
So I must insert xip.bin in WWE official pharos OS.nb and place it in "build\ROM"
poldo964 said:
Remember that you must port only MSXIPkernel (files and modules), OEMXIPkernel contains a device specific modules and files so dont touch it
yes if this xip is already ported from another device
Click to expand...
Click to collapse
That ROM is supossed to be official from HTC, I took it from HTC Diamond's wiki. So I've done the following:
Delete:
osaxst0.dll: I've deleted osaxst0.dll folder in \modules\MSXIPkernel
osaxst0.dll.imageinfo.txt: deleted osaxst0.dll.txt in \modules\MSXIPkernel(??)
hd.dll: deleted hd.dll folder in \modules\MSXIPkernel
hd.dll.imageinfo.txt: deleted hd.dll.txt in \modules\MSXIPkernel(??)
bmui.nb0 and bmui.nb0.imageinfo.txt: they're in diamond OEMXIPkernel
I'm now reallocating the modules in memory.
I've succesfully ported XIP and inserted to OS.nb in Build/ROM in DIY chicken.
After that I've renamed SYS and OEM folders in DIY to SYS.old and OEM.old.
Then, I've dumped my esn rom, to get OEM folder (oemxipkernel folder was inside) and placed it on Build, and I copied diamond SYS to Build folder.
SYS.old folder had MSXIPkernel inside, so I've taken MSXIPkernel from the modules of ported XIP, and copied it inside. Original SYS.old had also some files inside MSXIPkernel (723fb954-d931-4348-b672-82a188e587b5.dsm, 723fb954-d931-4348-b672-82a188e587b5.rgu, mxip_lang.vol and sysroots.p7b), so I copied it from Files/MSXIPkernel (ported XIP) to the new SYS.
Then I used G'reloc to adjust Slot0, Slot1 and ROM size to the new sys (01FA0000, 03DF0000 and 8FC00000)
Also, I copied shell32 and shellres modules from Shell package from the DIY SYS folder to the new sys.
Finally, I build the rom (the three bat files), and flashed it: the pda stuck at first screen with red letters.
Thanks and happy new year
first of all try to flash the OS with new xip, so you can verify if it's ported right. To do this copy the OS.nb with new xip to "DIY\Build" folder and run "3.CreateOS.bat". Now you should have ruu_signed.nbh (with new XIP) in "DIY\Flash" folder, flash it and see what happens
poldo964 said:
....what happens
Click to expand...
Click to collapse
XIP isn't working. The flash stuck 15 minutes before I shutdown it at the "smart mobility" screen.
This was my process:
I repeated the xip porting.
Dumped the part01.raw from my pharos (it haves the official ROM, 1.11.707.1 WWE). Renamed that file to xip.bin and dumped with XIPPort. Made packages and deleted the two MSXIPkernel folders from it.
Dumped the diamond ROM to get its xip.bin. Dumped it with XIPPort and made packages. Deleted the osaxt0.dll and hd.dll folders from Modules\MSXIPkernel.
Copied the two MSXIPkernel to the Pharos "Files" and "Modules".
With XIPPort, "undo", "Relloc P", and "write maps".
Code:
03e20000 - 03e2a000 L0000a000 Virtual base address of ps2fatutil.dll
03e2a000 - 03e3a000 L00010000 Virtual base address of ONDisk.dll
03e3a000 - 03e41000 L00007000 Virtual base address of HtcFsdspy.dll
03e41000 - 03e47000 L00006000 Virtual base address of ceddk.dll
03e47000 - 03e55000 L0000e000 NUL
03e55000 - 03e59000 L00004000 Virtual base address of regenum.dll
03e59000 - 03e68000 L0000f000 Virtual base address of pm.dll
03e5a000 - 03e68000 L0000e000 !!!!!!!!!!!!!!!!!!
03e5a000 - 03e5e000 L00004000 Virtual base address of cecompr.dll
Rellocated (with M'reloc to binaries and Notepad to imageinfo.txt files)
With XIPPort, "Relloc P", and "Write Maps", "build xip_out.bin" and "write xip_out.bin" to 04_Os.nb, at 00313800.
Code:
03e20000 - 03e2a000 L0000a000 Virtual base address of ps2fatutil.dll
03e2a000 - 03e3a000 L00010000 Virtual base address of ONDisk.dll
03e3a000 - 03e41000 L00007000 Virtual base address of HtcFsdspy.dll
03e41000 - 03e47000 L00006000 Virtual base address of ceddk.dll
03e47000 - 03e4b000 L00004000 Virtual base address of regenum.dll
03e4b000 - 03e5a000 L0000f000 Virtual base address of pm.dll
03e5a000 - 03e5e000 L00004000 Virtual base address of cecompr.dll
03e5e000 - 03e68000 L0000a000 NUL
Renamed 04_os.nb to os.nb and placed at Build folder. Executed the third bat file and flashed...
hi jose,
have you patched the new xip_out.bin to fit exact file size?
if no, patch it using the batch file (Fill_XIP.bat) inside this archive. If it stucks again try to repeat the procedure using the tool inside my archive. It's named XipAddrTools (by garfieldau) and it's very useful. Here you'll find how it works. Use "OUT.pharos.20757" as a reference folder.
bye
hi,
That tool is amazing compared with the manual work.
I've repeated it with xipaddrtool, modified virtual adresses with it and reallocated physical addresses with xipport, and that tool doesn't showed any "red lines" between the modules so I think that there aren't any overlapped modules.
But at first, when I load the reference out folder, in the "all" tab of xip addr tool, a lot of yellow squares appears, like that image:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
These yellow squares, are errors or some information? they appear even if I reallocated or not the addresses.
Also, I tried to flash your 20757 xip in the pharos os, and it works, but my ported xip is still giving problems.
thanks
can you share the "OUT" folder?
poldo964 said:
can you share the "OUT" folder?
Click to expand...
Click to collapse
of course . Here you can download it. It includes the ported xip (out folder & xip_out.bin), the original diamond xip(build 19965) and the pharos one (from 1.11.707.1 rom).
bye
the yellow line indicate that the module must be relocated. To do this you must press the space bar and the yellow disappears.
Do this for every yellow line. When you press the space bar the tool updates the imageinfo.txt with the right address, so you don't need to do it manualy. After that run realloc p from xipport and then write maps.
Follow these steps:
make a copy of "OUT.pharos.20757" folder and reneme to OUT
open xipport and "make pkgs"
inside "OUT" folder delete MSXIPKernel folder (modules and files)
copy the MSXIPKernel folder that you want to port in "OUT" folder (modules and files)
from xipport press "undo"
copy:
Code:
cachefilt.dll
cachefilt.dll.txt
hd.dll
hd.dll.txt
mencfilt.dll
mencfilt.dll.txt
osaxst0.dll
osaxst0.dll.txt
from "OUT.pharos.20757\MODULES" to "OUT\MODULES" (overwrite)
run XIPAddrTools.exe, choose "OUT" as work folder and "OUT.pharos.20757" as ref folder
clear all yellow line by pressing space bar and close
realloc p with xipport and write maps
check MAP.physical.txt and MAP.txt (no "!" inside)
"build xip_out.bin" with xipport
patch the size of xip_out.bin with Fill_XIP.bat
finally write "xip_out.bin to:" with xipport
A problem, again...
poldo964 said:
clear all yellow line by pressing space bar and close
Click to expand...
Click to collapse
On that point, I'm able to clean all the yellow squares, except one:
Press the space doesn't work for it. I tried to reallocate to 4C000 manually with M'reloc, but even that tool doesn't work. If I enter that address in o32.vbase, and press "Do it", it shows again the old value.
Looking into the imageinfo files, filesys.dll haves it:
Code:
...
o32[1].o32_psize: 00001200
o32[1].o32_dataptr: P+00264268
o32[1].o32_realaddr: [COLOR="Red"]V+[/COLOR]0004B000
..
any other module, like imgfs.dll,
Code:
...
o32[1].o32_psize: 000001B4
o32[1].o32_dataptr: P+0008FD34
o32[1].o32_realaddr: [COLOR="Red"]D=[/COLOR]01FF3000
..
I've only seen that difference, anyway, I tried to build xip ignoring that and doesn't work, so what happens with that module?
OUT folder
bye
oops soory, forgot filesys.exe... dont worry about this it should be work anyway.
have you restored the original filesys.exe before build xip? ...and have you pached the file size before write xip_out to:?
if yes maybe the xip that you want to port has something wrong, try with another build..
I've had the same problem with some xip, all perfect but it stucks in first boot screen...
woohooo! it worked, with filesys from your 20757 folder. If I take from official WWE XIP, the same error appears (but with different address).
Now I'll start to try to port the SYS...
DIY kitchen haves a MSXIPkernel folder in SYS, what files should be placed there?
bye
jose_sonseca said:
DIY kitchen haves a MSXIPkernel folder in SYS, what files should be placed there?
bye
Click to expand...
Click to collapse
no one, you can delete this folder and OEMXIPKERNEL in OEM folder too
cu
poldo964 said:
no one, you can delete this folder and OEMXIPKERNEL in OEM folder too
Click to expand...
Click to collapse
Also, the rom didn't worked until I deleted that folder.
For porting the sys, I copied the .VM folder and shell32.dll and shellres.dll (folders) from the DIY SYS folder, added all the DPI96 folders (from touch dual spanish shipped rom, same 19965 build), and deleted the respective DPI192 packages.
It worked pretty well, I've only seen these errors:
Bluetooth doesn't work properly, happens with the two radio roms, it can't be turned on or search devices...
When searching with "Add a new device" in bluetooth config, it takes a while "working" and gives a popup showing "Bluetooth hardware error". This must be a problem related to SYS, the official pharos rom with the ported XIP works perfectly.
Activesync isn't able to connect, PC software gives a error when syncronicing, doesn't allow to access internet throught activesync.
The USB massive storage driver is still working.
EnLarge Menu frequently doesn't appear. Will try with Opal version of this app if I can found that package.
"Storage Card" folder, where MicroSD is mounted, in my rom was localized (in spanish, "Tarjeta de Almacenamiento"). This isn't important. EDIT: solution
Anyway, it's speedier than the original, without removing any OEM package, 78-79 mb free RAM. I'll try to fix that errors and upload it here.
Thanks a lot for the help
Hi Everybody, I have a good news, Ervius Visual Kitchen V 1.8.1 is working well on OPAL, and with it you can make your own Up to date ROM and Multi Languange ROM.
First and Last, I am only presenting the Kitchen, Not the ROM, so if you have any nonworking app, please don't ask me, discuss it here with others Opal Owner because I DON'T HAVE OPAL. But if you ask me about the kitchen, i will answer it.
Thanks to:
- imblfmstr for tested the kitchen
- Ervius & Bepe for the great tools and kitchen
- Olipro
- tadzio
Download Link 21844 KITCHEN:
http://www.4shared.com/file/129247993/76a618f3/ERVIUS_KITCHEN_FOR_OPAL_By_BesFen.html
CONTENT OF 21844 KITCHEN
This is the kitchen root preview in Windows Explorer:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. EXT Folder
The External packages (EXT) folder is divided into Device Specific folders and a Shared folder:
*Device Specific folders are typically used for files (packages) that should only be applied to a specific type of the device.
Each Device Specific folder is further divided into Operating System Build Version Specific folders and a Common folder.
*Operating System Build Version Specific folders are typically used for files (packages) that should only be applied to a specific build (version) of Operating System. The Common folder is typically used for files (packages) that can be installed on any Operating System build version.
2. OEM Folder
The OEM folder can contain multiple Device Specific folders.
*Each Device Specific folder is further divided into Locale Specific folders and a Common folder.
*The Common folder is typically used for files (packages) that can be installed in any locale – not specific to a language.
*Locale Specific folders are typically used for files (packages) that should only be applied to a specific locale.
3. ROM Folder
The ROM folder is divided into Device Specific folders and a Shared folder.
*The Shared folder is typically used for kernel system files that are compatible amongst devices. (MSXIPKERNEL folder)
*Device Specific folders are typically used for kernel system files that should only be applied to a specific type of the device. (OEMXIPKERNEL folder)
-The Shared folder is further divided into Operating System Build Version Specific folders. Operating System Build Version Specific folders are typically used for kernel system files that should only be applied to a specific build (version) of Operating System.
-Each Device Specific folder is further divided into Operating System Build Version Specific folders.
4. SYS Folder
The system (SYS) folder is divided into Operating System Build Version Specific folders.
*The Build Version Specific folders will often contain files (packages) specific to the device DPI (Dot Per Inch) and Horizontal/Vertical display size.
*Each Operating System Build Version Specific folder is further divided into a ROM DPI, ROM Resolution, and Shared folder – providing a significant amount of flexibility during ROM compilation.
*The ROM DPI, ROM Resolution, and Shared folders are further divided into Locale Specific folders and a Common folder.
*The Common folder is typically used for system files (packages) that can be installed in any locale – not specific to a language.
*Locale Specific folders are typically used for system files (packages) that should only be applied to a specific locale – for example, 0409 (English).
Updating visual kitchen with new build
SOURCE OF HOT BUILD
If you want to Build a new ROM with The new Build, go to here to get the Source.
http://forum.xda-developers.com/showthread.php?t=544445
UPDATING VISUAL KITCHEN WITH NEW BUILD
We assume to update my 21844 visual kitchen for OPAL with newer Build (example 23037).
A. EXT
1. In the EXT\Opal create a new empty folder with the name of the build (example 23037).
2. copy the folder “Opal_External_Packages” inside EXT\Opal\21844 to EXT\Opal\23037.
Now your extended packages is ready
B. OEM
No need to modify this Folder
C. ROM
1. In the ROM\Opal Folder, create a new folder with the name of the build (example 23037). Copy the OEMXipKernel folder from ROM\Opal\21844 into this folder as shown below:
2. in the ROM\Shared Folder, create a new folder with the name of the build (example 23037). Copy the MSXipKernel folder from New Build into this folder as shown above.
D. SYS
In the SYS Folder, create a new folder with the name of the build (example 23037). Copy the SYS from the new Build into this folder as shown below:
DUMP XIP.BIN TO GET MSXIPKernel
TO make a new build ROM, we need MSXIPKernel, and sometime people only provide xip.bin of the new build. If it happens we need to dump it to get MSXIPKernel, download that file, and dump it with XIPPort.exe, here is the tools.:
http://www.4shared.com/file/125449740/a1b9e454/XIPPort.html
Now, put the attached file and the xip.bin in the same folder, then run XIPPort.exe, click “dump xip.bin” and wait until folder “OUT” appear, then click “make pkgs”, close the XIPPort.exe.
Go to folder “out” and you will find “Files and Modules” folder, inside each folder, you will find folder MSXIPKernel. Move the module inside OUT\MODULES\MSXIPKernel to OUT\FILES\MSXIPKernel, now you have the MSXIPKernel. And don’t forget to delete any *.txt file inside MSXIPKernel.
USING VISUAL KITCHEN
After add new build, run the kitchen, and you will get pic as below:
1. Choose your device, Opal
2. Choose your XIP Build
3. Choose your SYS Build
4. Choose your EXT Build
The default compression is XPR, you can make LZX compression by select the LZX.
You can change the PP, click "Other" Buton, you will see pic below:
Enter the number of PP as you want, the default for Opal is 12Mb, More PP make the ROM more stable and multitasking, you can make experience for the number of PP.
You can weather the package in the EXT, OEM, or SYS to include in the ROM or no by double click the name of packages.
OK that is all, you ready to click the "Create ROM" Button.
HAPPY COOKING Time to SLEEP....
Useful tools
USEFUL TOOLS
EXT PACKAGES CREATOR'S TOOL
http://forum.xda-developers.com/showpost.php?p=4489567&postcount=17
http://forum.xda-developers.com/showpost.php?p=4714566&postcount=69 Thanks XirXes
Here is some method posted by XirXes to minimize memory leak by make SLOT 0 memory free from Modules, Thanks XirXes.
Original posted by XirXes
XirXes said:
Hey BesFen, I think we need a post about memory mapping in this thread. One of the biggest things I've found that makes a rom invariably suck is poor memory mapping. It can even lead to not booting. I use this list of modules that can be converted to files from EDTP. It helped me fix my mapping issue without breaking anything. I use RightClickRecmod from this post for converting. Right click recmod needs C++ Runtimes and .NET Framework in order to work. If for any reason that doesn't work for someone they can do it from inside the kitchen itself (I've never tried it that way) or they can use a .bat script I found here.
RightClickRecmod
•C++ Runtimes
•.NET Framework
The modules that can convert to file:
Code:
AdobeFlash = ALL
AdobeFlashCodecs = ALL
BaseApps = Beam.exe, caldl.dll, calendar.exe, doclist.dll, fexplore.exe, hotvoice.exe, note_prj.dll, notes.exe, pimg.exe, shptutil.dll, VoiceBar.dll, VoiceCtl.dll and voicedll.dll
BlueTooth = bthpbap.dll ONLY!!!!
BROWSING = browser.dll, iexplore.exe and wmlview.dll
BROWSINGCORE = jscript.dll, mlang.dll and msscript.dll only.
Browsingie = ALL
BTDUN = NONE
Bth_A2DP = Avrcp_MPplugin.dll only.
Bth_HID = All except for bthidsvc.dll
GPSid = gpsid.dll
InternetSharing = ALL
MediaOS = ALL
NetCF = ALL
OS = dw.exe, dwui.dll, enrollnot.exe, machineenroller.dll, machineenrollerlaunch.exe, networkpolicycsp.dll, omadmclient.exe, quartz.dll, tcpstk.dll, tmarshaller.exe, umarshaller.exe
Phone = simsec.dll, tkitapp.exe
PhoneRedist = siclnt.exe
Redist = configmanager.dll, configmanager2.dll, obexapi.dll, obexinbx.dll, remnet.exe, syscsps.dll, welcome.exe
RemoteDesktopMobile = ALL
Shell = autotimeupdate.exe, CertInstaller.exe, fbrowser.dll, find.dll, msnsspc.dll, mstli.exe, peghelp.exe, richink.dll, rnaapp.exe, shfind.exe, sndplay.exe, taskmgr.exe, tskschcsp.dll, tskschedule.exe and tskscheduleu.exe
SkyBox = All but MyPhoneService.dll
WindowsLive = ALL but any DLL with Resource in the name.
WindowsLiveIM = ALL, unless you leave it running.
WMWidgets = unkown since I don't run any, but I imagine if you leave widgets running there should be a few.
Click to expand...
Click to collapse
Here some source of SYS, ready to use in VK Kitchen.
http://forum.xda-developers.com/showthread.php?t=587655 =====> Already Recmod/convert to file
http://forum.xda-developers.com/showthread.php?t=551470 =====> some build of SYS already Recmod/convert to file
Great BesFen, really good work! Can any mod make this post a sticky? Thanks!
I will be trying this kitchen soon...
I have successfully cooked a booting 23041 rom with this kitchen and once its working right I'll make a thread for it. Thanks BesFen, you're the man.
XirXes said:
I have successfully cooked a booting 23041 rom with this kitchen and once its working right I'll make a thread for it. Thanks BesFen, you're the man.
Click to expand...
Click to collapse
Nice to hear that the kitchen work well, Now time for you and others to build ROM and share it in Forum.
GO A HEAD, MAKE A ROM....
how to solve the following error?
ERROR: Not enough space in Slot 0!
Click to expand...
Click to collapse
**Sorry for not related to your kitchen**
lkachun9129 said:
how to solve the following error?
**Sorry for not related to your kitchen**
Click to expand...
Click to collapse
You can convert some modules to files.
If you can, try to make 0 module in slot 0 by convert some module, it will very good in releasing memory management and avoid "not enough memory" happened in your device.
Something wrong
Hey guys thanks for all your work on making this kitchen.But i think something is wrong somewhere.I build a rom 23037 and it booted and came up to the home screen,it has good speed but no backgroung,the home settings does not work,comm manager don't work and some other settings. What could be wrong?
Oh and i noticed that on boot the ONBL is 1.27.0000 and the OS is 1.26.0.0.
100% working
Guys i figured out what was wrong.The EXT folder don't have all the files for the Opal to work correctly.You can download the files from here : http://rs415.rapidshare.com/files/148930538/Opal_Stock_ROM_OEM_Folder.rar
I replaced all the files in the EXT and OEM folder with the ones i downloaded, build the rom and everything works great.By the way the SYS and XIP has to be 96dpi for it to work on the opal.
theglen35 said:
Guys i figured out what was wrong.The EXT folder don't have all the files for the Opal to work correctly.You can download the files from here : http://rs415.rapidshare.com/files/148930538/Opal_Stock_ROM_OEM_Folder.rar
I replaced all the files in the EXT and OEM folder with the ones i downloaded, build the rom and everything works great.By the way the SYS and XIP has to be 96dpi for it to work on the opal.
Click to expand...
Click to collapse
That's GOOD, This is we call THREAD for OPAL DEVELOPMENT, I hope everybody can share every knowledge in COOKING here.
Take a look others thread, they blow very quick, come on, i want to see other guys active here.
Transfer knowledge, Discuss, and Release a ROM.... Make OPAL FORUM HOT
how do i use this?
i just want to remove some apps from the rom like TouchFLO, Opera, Voice Commander etc... the ones i don't use to free up some memory.
is it like Bart PE Builder?
if i ʞɔnɟ up the cooking, will it brick my Viva when i flash it?
TheRem said:
how do i use this?
i just want to remove some apps from the rom like TouchFLO, Opera, Voice Commander etc... the ones i don't use to free up some memory.
is it like Bart PE Builder?
if i ʞɔnɟ up the cooking, will it brick my Viva when i flash it?
Click to expand...
Click to collapse
You can double click the app name from the kitchen list, or you can remove the folder name of app from EXT Folder.
The PDA may not boot (Brick) if:
1. the different version of XIP and SYS to far.
2. you don't put complete xip's files
But you can fix it by flash with others ROM, just go to Bootloader or Tricolor (I don't know which Button must press in Opal), connect your PDA to PC, and Flash again, very simple.
thanks BesFen!
i gotta try this.
ROM create is running, but very slowly. Looks like a fresh ROM. Btw, when I dump a cooked rom, it stop with error, may be protected ROM! Anybody know how to overcome that?
Including Other Apps
Does anyone know how to add Apps (.cabs) to the list on the Kitchen so its included into the ROM like other apps not included.
Diagrax said:
Does anyone know how to add Apps (.cabs) to the list on the Kitchen so its included into the ROM like other apps not included.
Click to expand...
Click to collapse
Here the tools:
http://www.4shared.com/file/131050367/e9febb08/Package_Creator.html
Put the tools and cab file in the same folder:
1. run package-creator-v2.7.exe, Click "Open Cab File", navigate to the cab file.
2. run OLD2NEW.bat
nguoc said:
ROM create is running, but very slowly. Looks like a fresh ROM. Btw, when I dump a cooked rom, it stop with error, may be protected ROM! Anybody know how to overcome that?
Click to expand...
Click to collapse
Protected ROM can not be dumped, better you dump a stock (Official) ROM.
The ROM should run fast in opal, not slow, pls inspect the xip and sys, maybe you miss some module/file, or put the module not in right place.
BesFen said:
Here the tools:
http://www.4shared.com/file/131050367/e9febb08/Package_Creator.html
Put the tools and cab file in the same folder:
1. run package-creator-v2.7.exe, Click "Open Cab File", navigate to the cab file.
2. run OLD2NEW.bat
Click to expand...
Click to collapse
Thanx but where should i place them
BesFen said:
Protected ROM can not be dumped, better you dump a stock (Official) ROM.
The ROM should run fast in opal, not slow, pls inspect the xip and sys, maybe you miss some module/file, or put the module not in right place.
Click to expand...
Click to collapse
Thank you,
I follow all the instruction in http://forum.xda-developers.com/showthread.php?t=554858, dump the orginal rom 6.1, built a rom, then I want to dump the created rom, but cannot!
The instruction does not mention anything about xip, cause the kitchen create it during building process. So just the sys. I download the sys in
http://forum.xda-developers.com/showthread.php?t=544445;
ported it in the kitchen, change the dpi to 96, res to 240x320, then create. But some time the ROM can boot, some time it cannot. Btw, if it boot, I found lots of errors, and don't know how to resolve it.
Does anybody have a stock 6.5 ROM or every thing dump from it?
[WM Kitchen] OsKitchen Zero v1.33.5: The Easiest & Most Complete Kitchen (20/10/2010)
Index of this thread
(This Page) General Informations, Download links, Screenshots
Using OsKitchen Zero (Tutorial)
Moving from Ervius Visual Kitchen to osKitchen
Frequently Asked Questions
Useful Resources (Links where to find the latest Windows Mobile Builds and EXT packages)
Description
What does this kitchen do that others don't? You should ask yourself what the other kitchens do that this one doesn't because it literally does everything: importing the ROM directly from the EXE updater, detecting all the informations to rebuild the ROMs from the ROM file itself (no more messy BAT/CMD to edit to get things working), sorting the packages with the best EXT packages conversion engine available (no more EXT packages with weird names or out of place), building ROMs for different languages in the same pass picking all the correct windows mobile packages (EA/NonEA/AH/CS/Transcriber/Uniscribe/Fonts) to use, directly installing packages on the devices without having to flash each time (package installer), automatically recmodding of packages (without touching any of the original files) to allow cooking windows mobile 6.5 ROMs using older kernels, automatic manila CFC compression to save space and improve speed (and supporting latest manila builds where CFCGui has issues) and much, much more while keeping all the user interface well organized and being extremely easy to use. Start the kitchen, import a stock ROM and go! Give it a try and find out yourself how it lives up the hype or if still unconvinced scroll down to see how much simple yet complete the kitchen is by looking at the screenshots.
Features
The kitchen has the most streamlined and self-explanatory UI you can find, it can natively import and rebuild ROMs for all the devices in the supported list without having to mess with any batch/cmd files, it shows detailed informations about every Windows Mobile package and warn about conflicts and unmet dependencies, it can build multilanguage ROMs in the same pass by automatically choosing all the right localization packages required for each language, it can import windows mobile builds of any kind, convert OEM packages/CABS/HTC Hotfixes directly to EXT packages, can automatically recmod/UPX and natively compress/patch manila manila files with CFC, it automatically detects older kernels and suggests all the right packages to recmod to get the ROM working, it checks the ROM integrity while building to avoid many common user mistakes, has a lot of tweaks directly selectable with just a click from the kitchen interface, it has the most advanced search system available and much more.
Supported devices
HTC: Artemis, Athena, Blackstone, Diamond, Elf, Gene, HD Mini, Herald, Hermes, Iolite, Jade, Kaiser, Leo, Mega, Nike, Opal, Polaris, Pharos, Quartz, Raphael, Rhodium, Sedna, Titan, Topaz, Trinity, Vogue, Whitestone (CDMA variants of all phones are supported as well)
Palm: Treo Pro
Sony-Ericsson: Xperia X1 (HTC Kovsky)
Samsung: i900/i910 (Omnia) (delete the giisr.dll in the OEMXIPKernel folder or the ROM won't boot)
Asus: P565 (XDA Zest) (even thought not officially on the list the kitchen can import the NB0 ROM extracted from the ABI file with p835abisplit2)
Other devices, with caveats: as long as you have tools to convert between NB and your phone format the kitchen should work fine unless platformrebuilder doesn't support your device (I.E. it crashes). If platformrebuilder DOES NOT support your device you can still put a dummy NK.exe from another device to stop platformrebuilder from crashing (be sure the NK version (6.1/6.5) is the same) and insert your own crafted XIP.bin (there's a setting in Advanced Tweaks to use a custom xip file).
Download link
(First time using osKitchen? Read the brief tutorial in the 2nd post)
v1.33.5 All in one package:
http://forum.xda-developers.com/attachment.php?attachmentid=423263&stc=1&d=1287585346
DISCLAIMER: This software is provided "as is" and I don't take any responsibility for any damage caused to phones or anything else. I added all sorts of integrity checks I could think of to prevent the generation of invalid ROM files and so far none of the thousands of users who downloaded the kitchen reported invalid ROM files but just like when flashing any cooked ROM don't forget that there is always the risk that the phone may end up bricked (due to defective usb controllers, defective cables, defective phone memory, wrong radio file, software interfering with the flashing tools, power outages, etc).
System requirements
Microsoft .NET 2.0 (.NET 3.0 and 3.5 are 2.0 based so those work as well), already preinstalled on most computers, the kitchen won't start without it so it's easy to find out if it's missing
The following three system requirements also are preinstalled on most computers; the kitchen will warn you if they are needed so don't worry installing them unless required:
Microsoft Visual Studio 2008 runtime, required by xidump during the importing process
Visual Studio 2003 (7.1) Runtime Libraries, required by platformrebuilder to solve the "cereg400.dll cannot be loaded" error message, required by XIDump to solve the "Failed to init decompression!" error message and required by IMGFSFromDump to solve the "Unable to load compression DLL!" error message. Copy those libraries in the Resources\Tools folder and if that still doesn't work in the system32 subfolder of your windows folder (the right subfolder for 64bit systems is syswow64)
XmlLite Update Package required to solve the "Unable to load LibNB.dll" errors (only for Windows XP SP2)
Changelog from v1.33.4 to v1.33.5
Fixed os.nb file deletion issue for devices with no sectorinfo
Changelog from v1.33.3 to v1.33.4
Fixed delete shadow order entries not being saved
Implemented internal manifest management to reduce disk overhead during package scanning
Implemented detection of registry values that are found without a preceding registry key specifier
Improved file copy and file deleting speed
Changelog from v1.33 to v1.33.3
Fixed issue with packages with duplicate files causing errors in the package installer
Fixed issues on CAB files with "\." InstallPath attribute
Un-tied Calibration Data and Skip Welcome screen settings
Fixed IMGFS cache not being applied correctly
Fixed issues when installing packages registry files containing multi_sz strings with the package installer
Fixed new packages sorting issue
Changelog from v1.32 to v1.33
Fixed issue when using a drive root directory as temp folder
Fixed a localization manager issue that was causing longer startup times
Fixed some issues in CAB file folder mapping
Fixed the kitchen truncating i780/i900 BIN files
Added error messages when the DPI or MUI settings are missing on the phone
The kitchen now allows importing ROMs even when the language folder is missing (multilanguage Samsung ROMs)
Added a warning when the initflashfiles/app.dat files are not Unicode
The kitchen now reads app.dat as ASCII when Unicode characters are not detected
Fixed issue in which the initflashfiles.dat file was left locked for a few seconds during the import process prompting a retry/cancel file operation
Added detection and parsing of DPI_ EXT subpackages
Changelog from v1.31 to v1.32
Implemented total integrity check that checks all the structure of packages, modules and every single line of initflashfiles/registry files for issues. All the issues within the package will be shown next to the package name in the packages list.
Added support for variables in initflashfiles.dat, app.dat to make localization easier (because the variables will be replaced with the correct localized folder when the ROM is built). The list of supported variables can be found in the FAQ of the official osKitchen thread.
Added “RAM Drive Mode” setting to have additional cleanups performed during the build process to reduce the space usage of the temporary folder
Fixed crash when trying to open a search result file that has a defective associated application
Implemented total integrity system: every package, DSM, module and initflashfiles file will be validated for integrity and all the problems detected will be shown with an error/warning icon on the left of the package
When importing a ROM the initflashfile values are saved with the converted hexadecimal values like the generated app.dat files
When importing a ROM the progress bar will now warn of temporary folder cleanup even when the import has failed
Removed the unnecessary PackagePath attribute from the project files
Fixed the kitchen crashing when the resources folder was missing or the command line parameters were wrong
Renamed universal package converter to universal package importer
Fixed LCID validation not checking the LCID length correctly
Fixed the pagepool size patching message reporting unlimited instead of the real size
In-line comments are now maintained when the initflashfiles is split during the ROM import
When importing a ROM the initflashfiles lines that are not valid will now be commented out
Removed the %LCID% variable as alternative to %ROM_LCID% in the ROM filename
The ROM filename variables replacement is now case-insensitive and the value of the variables has any non-filename friendly characters removed
Remove Uniscribe/Transcriber mutual exclusion warning
Improved error handling during the NBH generation process
Fixed error message during build when packages contain more than one RGU file
Fixed some registry entries being unrecognized when tabs were used for spacing
Fixed the recmod messagebox appearing twice when the device is selected and no is chosen as answer
Fixed the windows mobile build importer not deleting the imageinfo.txt files in modules
Implemented a rudimentary “Install Package on device” function that allows installing a package on the device to avoid having to flash the phone for every changed file. Currently only sends the main package (no LCID/res subpackages), doesn’t apply registry entries and applies initflashfiles entries with no variables replacement.
Fixed the kitchen crashing when the packages contained corrupted DSM files
Fixed WinCENLS_Lang_RTL_0401 detected as having the wrong syntax
Fixed error messages saying that the packages had a wrong syntax on _CS packages
Fixed Danish appearing as “da-dk” and “Portuguese” listed as “Portugese”
Fixed the locale listview showing the LCID in the country code column
Now the locale combobox shows the locale name and country instead of just the LCID
Implemented automatic Unicode detection in initflashfiles.dat files
Fixed the file copy operations continuing even after the non-resumable error message
Fixed package validation not working in the universal package importer/windows mobile build importer
Added an “Expand all” context menu entry for search results
Added warning when wince.nls ends up in both XIP and IMGFS partitions
The packages issues are now listed by subpackage
The “Install Package on Device” function now also includes the subpackages, the settings to compile the packages are extracted from the phone itself and all registry values except multistring/binary are added
Removed missing DSM warnings
Implemented binary entries support in the “Install Package on Device” function and fixed temporary folder issues
Fixed duplicate DSM creation in package properties and reduced the wait before the packageproperties form is shown
Fixed error message when loading old kitchen project files
Added support for REG_NONE registry keys
The kitchen GUI is now shown before the project files or imported ROM informations are automatically loaded
Fixed the new DSMs file for SYS/OEM packages being saved with a Guid different from the registry key one
Added support for REG_MULTI_SZ on “Install package on device”
Fixed the kitchen leaving old combo box values when loading projects referencing non-existing devices, profiles or windows mobile builds
Search now removes unnecessary wildcard characters from the search string when wildcard mode is enabled to improve search speed
Renamed “Empty project” to “New project”
Fixed crashes in “Install package to device” with some SYS/OEM packages
Implemented integrity check support for boot_ms.rgu and boot.rgu files
Removed TGTool from the kitchen archive
Disabled F5 refresh during ROM generation
Implemented path variables support in the “Install package on device” function (note: the WM build on the phone must be present in the kitchen and have the build number as folder name for the localization to work)
Fixed issue with "Install package on device" function and short filenames and multiple initflashfiles files
Halved the time required for project loading and packages list refreshing
Implemented IMGFS support for unicode characters
Implemented CE variables support in “Install package to device” function
Added HTC Oboe to the devices list
The sort column order is now reapplied after loading a project instead of defaulting to sorting by name
Fixes some issues with empty DSM files
Fixed crash when using unicode package names
Added check to prevent boot.rgu and boot_ms.rgu from being present in non-XIPKernel packages
Fixed the locales combo box not being refreshed after a new ROM has been imported
Fixed issue in which the kitchen would save a DSM file with random name instead of overwriting the correct DSM file if the source DSM file was corrupted
Implemented case insensitive manila.exe/mode9 CFC patch
Completed translation entries list for ROM importer
Added tools error handling in UPX/Recmod/PNG Compression/xidump/nbimagetool/TGTool/o2Util/ImgfsFromDump/OsNbTool/Platformrebuilder
Fixed erroneous error handling in imgfsfromdump that was causing file copy error messages if the tool failed
Fixed reduced OS file generation ignoring imgfsfromdump error messages
Fixed TSW/MST management not checking that the output file was correctly created
Fixed the kitchen ignoring missing custom user tools error messages and continuing the build process
Initflashfiles parsing now parses files as UTF8 when the UTF16 BOM header is not detected
The registry file validation now checks if the REGEDIT4 header is present
Fixed the locales selection combobox not detecting new language changes during refresh
Fixed “Install to device” function copying square resolution packages for some resolutions
Fixed LCID EXT packages lacking the RGU file not being moved into the correct main package folder
Fixed registry validation generating errors about dwords where values have initial spacing/tabulation
Added translation entries for the module validation messages
The kitchen now reads partitions informations from the OS.NB file and calls osnbtool with the proper partition numbers (to support older ROMs without ULDR)
The kitchen can now extract BIN files from more updaters (Samsung i780 and others)
Added translation entries for OS.NB generation error management
Added translation entries for the registry validation error messages
Improved error messages (added categories) on the error tooltips
Added translation entries for the package validation error messages
Added translation entries for the initflashfiles validation error messages
Added translation entries for the manifest validation error messages
Added initflashfiles variables for Application Data (%CE19%) and Program Files\Games (%CE8%)
The initflashfiles entries of imported CAB files are now mapped to the correct initflashfiles variables
How to use
Once unpacked the kitchen is ready for use, as soon as you start it you will be asked to import data from a stock ROM.
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tree Structure
The new kitchen structure is very simple however it requires a ROM to be imported for device configuration files to be generated. Always import a ROM for your device and start working on it.
Output - Where generated roms are saved
Projects - Where the project files are saved
Resources - Tools and other internal kitchen files, shouldn't be touched!
Sources - Contains all the files of your Windows Mobile builds and Devices
Devices
#DEVICE NAME# (You can use the name "Common" to share packages between multiple devices)
EXT Packages - All the EXT packages must go here
OEM Packages - All the OEM packages must go here
Profiles
#Device Profile Name# - Contains the "Device Informations.XML" file and all the various packages required for building the ROM
NBH Structure - Contains files required by the kitchen to rebuild the NBH correctly
OEMXIPKernel - The OEMXIPKernel with all the device drivers and native kernel must go here
NB Structure - Contains files required by the kitchen to rebuild the Os.NB correctly
ROM Parts - .ROM, .VM, imgfs-template.bin, romhdr.bin and other files needed for relocation and XIP/IMGS generation must go here
Windows Mobile Builds
#Windows Mobile Build Number#
All - The language-neutral DPI and Resolution files must go here
Common - All the language-neutral Main Packages must go here
#LCID FOLDER# - All the localized packages must go in the appropriate LCID folder
Additional files
Visual Studio 2003 (7.1) Runtime Libraries, needed to solve the cereg400.dll cannot be loaded issue: http://www.mediafire.com/?mjmmgtwmion
ImplantXIP and ImgfsToNB tools, needed for the alternative building method: http://forum.xda-developers.com/attachment.php?attachmentid=374999&stc=1&d=1281153923
Using OsKitchen Zero
What you need to know first
The first thing you need to know is that Windows Mobile is not like a desktop operating system: you can't take a ROM from another phone and flash it on a different phone model because Windows Mobile relies on an extremely specific kernel and drivers that are compiled by the manufacturer for each device model. The Windows Mobile ROM contains only the Windows folder - yes, that's right, the ROM is just the plain Windows folder with NO subfolders - while every other folder (Windows\Start Menu, Program Files, My Documents and also Start Menu links etc.) is generated when the ROM boots the first time.
Every official Windows Mobile ROM is composed of packages. Microsoft and device makers create those packages to split windows mobile and the additional software into separated components. The real "Windows Mobile" code, interchangeable between phones, is stored in packages commonly called SYS packages, while everything the manufacturer added (the drivers and the additional applications for customization) are called the OEM packages. The EXT packages are "fake" packages that the kitchen uses to overcome the limitations of standard packages (for example EXT packages are often used to build multilanguage packages without having to create a single additional package for each language).
The Windows Mobile package structure is very simple. SYS and OEM packages are identical in structure and can only contain:
A DSM file (a file that contains some package informations, for example what other packages it require or what files it contains, most kitchens usually ignore this)
A RGU file (a registry file containing the registry entries associated with the packages)
Other files or modules that compose the package: the modules are folders that usually have file-like names (meaning they have an extension) and are a different way to store executable and DLL files on the ROM.
Note: A SYS/OEM package cannot have any subdirectory with the exception of modules directories.
EXT packages - that as already said are "fake" packages that are converted to the Windows Mobile package format by the kitchen - have a different layout: everything goes into a "files" folder except the registry files (app.reg), dsm files, initflashfiles entry files (.dat) and there can be subfolders with a LCID (language-ID) code as name (a LCID is a string composed of four HEXadecimal numbers identifying a language, e.g. 0409 for US English, 040C for Spanish, etc.) to store language-specific files in the same structure (.dsm and .reg in another "files" subfolder, like for the main folder).
EXT packages are the main way custom packages or packages from other devices are distributed on websites and forums. Recent HTC ROMs contains additional informations that allow kitchens to automatically convert OEM packages to the more user-friendly EXT packages: this allows to quickly remove applications just by disabling the package; other ROMs instead have everything stored in a single package (usually OEMMisc) and require more work to remove original applications.
The only important thing you still need to know is how the rest of the filesystem structure (Program Files, My Documents, Start Menu, etc.) is created during the first boot. All the system folders are generated and populated during the first boot because, as wrote before, the ROM contains only the Windows folder. Windows Mobile has two facilities for the first-boot (hard-reset) initialization: INITFLASHFILES.DAT, a text file that is usually in the OEM_Lang folder and that only allows creating folders and copying files (Documents folders, default pictures, and most start menu entries are usually added this way) and .PROVXML files that are some XML files that can do other advanced operations (like setting registry keys, certificates, phone settings).
Usually anything you can perform with PROVXML files, that unfortunately are difficult to edit and require a large knowledge of the format, can also be easily performed using initflashfiles and registry files. You can use the app.dat and app.reg files inside EXT packages (or initflashfiles.txt and RGU files in OEM packages) to add entries to both the initflashfiles file and to the registry: the kitchen will use them properly during the building process adding the app.dat entries to initflashfiles.txt and the reg entries to the final registry (the ROM boots with a precompiled registry HV file but you'll usually never have to mess with that when using a kitchen).
Manufacturers also use some advanced proprietary post-install tools to install custom cabs, apply themes and operator configurations (e.g. AutoRun, RunCC). Those rely on TXT configuration (*config.txt) files and can cause trouble (error messages about missing files during the first boot) when removing packages or files from packages that those config file point to if you don't update them.
When you want to upgrade a Windows Mobile Build the changes in the start menu are usually so many that it's REALLY recommended to start over with a new fresh initflashfiles.txt for that windows mobile build (you can find one for each language in the Da_G's rollup threads). Since in the official ROMs the start menu entries are all crammed into the initflashfiles.txt file (the app.dat exists only in the "fake" EXT packages) you will have to either take the time to create app.dat files for each package or to copy back all the initflashfiles entries for OEM/EXT applications back after you put the new initflashfiles for the windows mobile build you changed. The kitchen will try to move the config.txt and initflashfiles entries inside the correct packages while the ROM is imported to make SYS upgrades easier.
Now that you know the basics you can proceed to the first step...
Preparing the kitchen (Importing the Device ROM file)
1. Download osKitchen Zero and unpack the ZIP archive
2. Find a ROM update file for your device: the kitchen can import the EXE from all HTC and some Samsung updaters or alternatively the raw ROM file (the main used extensions: .NBH,.BIN and .NB are supported)
3. Open osKitchen Zero and the Import ROM Wizard will open
4. Select the device you want to work on from the drop-down list, you can actually write any device name because the list is just for reference to make sure people understand that the kitchen has been tested only with those devices
5. Select the ROM update file
6. Click NEXT
Building your first ROM to make sure everything works
At this point the main kitchen window will open. Since you imported a ROM all the "Project Settings" options will only have one choice, go on and select the only available choice for all the fields (device model, device profile, windows mobile build, language) and clicking Yes in case the kitchen asks you to automatically apply recommended changes should be enough to build a bootable and working ROM. The only setting that has more than one choice is the Compression setting that if you want to have the most available space to add your programs should be set to "LZX", if you want to use another compression first make sure that your phone will be able to flash a bigger ROM file.
Now you can go ahead and build your first ROM by clicking the "Start building button": the kitchen will work for a while, then tell you that the building process has been completed and ask you if you want to open the Output ROM folder; you can then answer yes, take the ROM file that has been generated and flash it, making sure it's the right format for your phone.
NOTE: don't try importing a ROM made for other phones different than the one you want to flash because the kitchen will rebuild the ROM for the device you imported and not any other. If you flash a ROM made for another device you risk bricking your device.
Once the ROM works (if it's a supported device it should work fine on the first try, if it doesn't please report the issue here so we can help fixing it) you can start working on the ROM. So that's it, you're ready to go. If you read the "What you need to know first" you will probably already have an idea of where to start for whatever change you want to do.
Moving from Ervius Visual Kitchen to osKitchen
Open osKitchen and import the latest ROM for your device
Replace the OEM packages
Locate the folder oskitchen created in your device (it's in the Sources folder) and delete all the packages in the "OEM Packages" folder
Open the OEM folder in the Ervius Kitchen folder, locate the folder of your device and copy&paste all the OEM packages that are inside the Common and the LCID folder (0409 for english, etc.) into a folder with any name you want inside the osKitchen "OEM Packages" folder (where you deleted them). The .VM folder can be ignored.
Replace the EXT packages
Locate the folder oskitchen created in your device (it's in the Sources folder) and delete all the packages in the "EXT Packages" folder
Open the EXT folder in the Ervius Kitchen folder, locate the folder of your device and copy&paste all the folders that are inside the Common (usually empty) and the Windows Mobile Build subfolder (it's a 5-digit number) in the osKitchen "EXT Packages" folder (where you deleted them).
Replace the OEMXIPKernel
Locate the folder oskitchen created in your device (it's in the Sources folder), go in the Profiles subfolder and then in its "default" subfolder, you'll find a folder named OEMXIPKernel, delete it.
Open the ROM folder in the Ervius Kitchen folder, locate the folder of your device, open the Windows Mobile Build subfolder (it's a 5-digit number) and then copy the OEMXIPKernel folder in the osKitchen "Profile\default" subfolder (where you deleted it).
Import the Windows Mobile Build
Locate the oskitchen Sources folder, open the "Windows Mobile Builds" subfolde and delete any folder in there.
Create a new folder with the number of the windows mobile build present in ervius kitchen (5-digit number) and create three subfolders inside: Common, All and a LCID one for each language (0409 for english, etc)
Open the ROM folder in the Ervius Kitchen folder, locate the folder named "Shared", open its Windows Mobile Build subfolder (it's a 5-digit number) and copy the MSXIPKernel folder in the osKitchen Windows Mobile Build "Common" folder you created earlier.
Open the SYS folder in the Ervius Kitchen folder, locate the Windows Mobile Build subfolder (it's a 5-digit number) and proceed as following:
Everything in the "Common" subfolders of the folders that start with DPI_ goes in the "All" folder you created in the osKitchen Windows Mobile Build folder.
Everything in the LCID (0409 for english, etc) subfolders of the folders that start with DPI_ and of the SHARED folder goes in the LCID (0409 for english, etc) folder you created in the osKitchen Windows Mobile Build folder.
Everything in the "Common" subfolder of the "SHARED" folder goes in the "Common" folder you created in the osKitchen Windows Mobile Build folder.
Frequently Asked Questions
How do I share packages between devices?
Create a folder named "Common" inside the "Sources" folder and put your packages (grouped in folders like standard device packages) in the "EXT Packages" and "OEM Packages" folders
Why is the final ROM file bigger or the total and available storage space lower than when using another kitchen?
It shouldn't. The other kitchens probably come with LZX compression selected as default while instead you told osKitchen to use XPR or None compression. You can also save additional space by using the ImplantXIP building method that removes the ULDR and some other wasted space.
How do I speed up the ROM generation process?
The kitchen needs to copy a lot of data and this may be a problem on computers where the hard-drive performance is low (i.e. laptops); antiviruses, firewalls and other applications may also interfere with the process speed therefore it's suggested to keep them off while the building process to save time. The kitchen allows setting another drive as a temporary folder to speed up the ROM generation and you can use a RAM drive (if you have enough RAM) or another hard-drive to improve the process speed.
How do I translate the kitchen?
When you start the kitchen for the first time if a translation file isn't found it will be created in "Resources\Localization" with the name matching your locale code (en-US.lng for american english, fr-FR.lng for french, it-IT.lng for italian, etc.): open that file with a text editor and translate all the text that comes after the "|||" separator (the text on the left of the separator shouldn't be touched, it's used both for reference and to identify the lines by the kitchen). Remember to post on this thread the translated files if you want them included in the official releases.
How do I reduce the space used by "Temporary OS.nb"?
It's suggested not to because the file will be needed in the next kitchen versions with the internal libnb NB dumping engine that will analyze the file, generate a new OS Structure.xml and delete it for good. The kitchen creates its own reduced files and keeps them in the Cache folder: if you really want to reduce the space used by the kitchen you can take the reduced file and replace the Temporary OS.nb with it.
How do I upgrade from an older kitchen version?
Simply delete oskitchen.exe and the Resources folder from your previous kitchen folder and put the new ones included in the archive or just unpack the archive overwriting the files. If you were using a version previous to 1.26 you will have to reimport a ROM and replace the imported packages with old ones (SYS/OEM/EXT/OEMXIPKernel (with nk.exe added inside) and remember to look at how the packages are structured). If you upgrade from 1.30 or below to 1.31 you may have to move your OEM Packages in a group subfolder because now the OEM packages are grouped like the EXT packages.
What are the variables that are supported in app.dat/initflashfiles.dat? (works only with 1.32 and higher)
%SystemDrive% (/)
%MyDocuments% (/My Documents)
%MyDocuments-MyMusic% (/My Documents/My Music)
%MyDocuments-MyPictures% (/My Documents/My Pictures)
%MyDocuments-MyVideos% (/My Documents/My Videos)
%MyDocuments-Templates% (/My Documents/Templates)
%ProgramFiles% (/Program Files)
%Windows% (/Windows)
%Windows-Fonts% (/Windows/Fonts)
%Windows-StartUp% (/Windows/StartUp)
%Windows-StartMenu% (/Windows/Start Menu)
%Windows-StartMenu-Programs% (/Windows/Start Menu/Programs)
%Windows-StartMenu-Programs-Games% (/Windows/Start Menu/Programs/Games)
Useful Resources
Windows Mobile Builds
Da_G All-In-One Windows Mobile 6.5.x Builds (Strongly recommended, contains all languages and all resolutions needed for almost any device)
Latest SYSs and OEMs XDA thread (where all the latest SYS builds are posted)
Common EXT Packages
(if you have suggestions or know where to find newer versions please post them)
Latest Touch Pro 2 EXT Packages (English-only, WVGA only)
Coming soon...
Help wanted!
1. Kitchen translation
Translators for the kitchens are needed! The kitchen is now completely localizable and will generate a translation template in the Resources\Localization folder when it's started up the first time: that file can be easily edited to translate all the text of the kitchen (also include an about entry for credits) and the kitchen will validate it and keep it updated every time it's launched organizing the entries that are missing or not found. If somebody has some spare time to help me translate the kitchen in other languages please attach a translated lng file to a post so I can include it in the kitchen archive.
2. Informations about the WM6.5.X packages required for each language
In order to improve the automatic localized packages selection I need to know which of the following packages:
Code:
BronzeEA BronzeNonEA BronzeAH | CommonEA CommonNonEA | SYSTEM_DEFAULT_FONTS COMPLEXSCRIPT_FONTS | gb18030 | Riched20 Riched20_CS | SipAR | Transcriber UNISCRIBE | Webview Webview_CS
are needed for each of the following languages:
Code:
0402 BRG Bulgarian (Bulgary)
0404 CHT Chinese Traditional
0405 CSY Czech (Ceská republika)
0408 ELL Greek (Ellas)
0411 JPN Japanese
0412 KOR Korean
0415 PLK Polish (Polska)
0419 RUS Russian
041B SVK Slovak" (Slovensko)
041D SVD Swedish (Sverige)
041F TUR Turkish (Türkiye)
0424 SVN Slovenian (Slovenija)
0804 CHS Chinese Simplified
081A SPB Serbian (Latin)
If anybody knows the right packages needed for one (or hopefully more) of those languages please let me know.
nice thread but i think u should post new sys files..... iam not able to cook may be still my format is wrong so i wanted to take reference but its old further links are broken
jagan2 said:
nice thread but i think u should post new sys files..... iam not able to cook may be still my format is wrong so i wanted to take reference but its old further links are broken
Click to expand...
Click to collapse
I uploaded 28223 SYS/XIP files, if you want other builds tell me.
@AirXtreme The kitchen is great and I like it way better than Ervius' VK, but I do have some small questions though. Since the split from the original osKitchen things have been a little vague, this is what I understand of it.
OndraSter developed the kitchens core code and you developed the new gui. Both trees still exist and both trees are 'updated' to RC3, but the version number in the .exe still says RC2.7.
Second, what is the latest version? Would it be possible to include build date and changelog in the first post, so it's easy to follow the updates to the kitchen? I know it's a lot to ask, but it would help a lot.
For the rest, great kitchen!
airxtreme said:
I uploaded 28223 SYS/XIP files, if you want other builds tell me.
Click to expand...
Click to collapse
Upload 23529 and I'll give this kitchen a whirl
Cheers.
KilZone said:
@AirXtreme The kitchen is great and I like it way better than Ervius' VK, but I do have some small questions though. Since the split from the original osKitchen things have been a little vague, this is what I understand of it.
OndraSter developed the kitchens core code and you developed the new gui. Both trees still exist and both trees are 'updated' to RC3, but the version number in the .exe still says RC2.7.
Click to expand...
Click to collapse
It's because my sources are from 2.7 and didn't update the titlebar.
KilZone said:
Second, what is the latest version? Would it be possible to include build date and changelog in the first post, so it's easy to follow the updates to the kitchen? I know it's a lot to ask, but it would help a lot.
Click to expand...
Click to collapse
The last version is the one in the first post, when I'll release other updates I'll update the first post and add a changelog.
dickenz said:
Upload 23529 and I'll give this kitchen a whirl
Cheers.
Click to expand...
Click to collapse
It was already up but with the wrong name (28223), now names are fixed.
Awesome, thank you that clears it I guess. Just forgive my stupidity... Downloading the ... latest ... version now (and updating my current version).
airxtreme said:
The last version is the one in the first post, when I'll release other updates I'll update the first post and add a changelog.
Click to expand...
Click to collapse
@Airxtreme
The version in 1st post supports Iolite?
I didn't see it in supported devices list.
dancer_69 said:
@Airxtreme
The version in 1st post supports Iolite?
I didn't see it in supported devices list.
Click to expand...
Click to collapse
Yes, I think I added its device file.
I'll download now and test, thanks.
EDIT
I just checked and I allready have this version(Os kitchen 1.4 RC2.7)
and I have successfully build an nbh with this version, I just not flash it yet.
So, it's supported.
Okay,
I just download the New ATT Shipped ROM from HTC and I was going to give this kitchen a try.
I extracted the files from the shipped ROM.
When I started the kitchen, it asked me to point to the RUU file. I selected the RUU_signed.nbh that I had just extracted and I get the message "There was no os.nb present i this file! Can't continue"
What am I doing wrong?
rgb-rgb said:
Okay,
I just download the New ATT Shipped ROM from HTC and I was going to give this kitchen a try.
I extracted the files from the shipped ROM.
When I started the kitchen, it asked me to point to the RUU file. I selected the RUU_signed.nbh that I had just extracted and I get the message "There was no os.nb present i this file! Can't continue"
What am I doing wrong?
Click to expand...
Click to collapse
Give me the link to download the rom so I can try to see why no OS.nb is detected.
airxtreme said:
Give me the link to download the rom so I can try to see why no OS.nb is detected.
Click to expand...
Click to collapse
http://www.htc.com/us/support/tilt-2-att/downloads/
Third download on the list. Complete ROM
airxtreme said:
I uploaded 28223 SYS/XIP files, if you want other builds tell me.
Click to expand...
Click to collapse
Thankyou actually i wanted to test the sys xip provided by u coz whenever i try to sort sys and xip myself for oskitchen it crashes platformbuilder.exe so will try the one made for oskitchen.
But plz plz its too big file for me. I request you to upload build 23529 qvga lang 0409 only and specially on mediafire or any uploading site which supports parallel downloads. I will be waiting ....
jagan2 said:
Thankyou actually i wanted to test the sys xip provided by u coz whenever i try to sort sys and xip myself for oskitchen it crashes platformbuilder.exe so will try the one made for oskitchen.
But plz plz its too big file for me. I request you to upload build 23529 qvga lang 0409 only and specially on mediafire or any uploading site which supports parallel downloads. I will be waiting ....
Click to expand...
Click to collapse
http://www.mediafire.com/?zy0ejwmiwmy
Ok ppl as Badwolve1 (sorry bud, it was my bad '-_-) did for OSkitchen i will do it for EVK (remember that EVK is not fully updated for build ROMS for newer devices)
If you want to set the kitchen to build ROMS for newer device you must to search what you need to update the build info.
We need this things:
Go to your C:\ and select tools in the menu bar select folder options and enable to see the extensions of files.. see hiden files and see system files
Download this and install them:
Net Frameworks 3.5
MS visual 2008
Ervius visual kitchen 1.8.1
Upgrade EVK 1.8.2 (Just replace the exe)
once you get the folders of the kitchen and installed the net 3.5 and Visual redist 2008
you need to modify a lil your kitchen_build_rom.bat file that must be in the TOOLS folder.
but i will tell you how later.
!!Starting on!!
Your new Kitchen looks like this now!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Once you downloaded the EVK you must to put the My Tools, Tools, and the EXE into a folder with a short name ( I use XDA) and please dont use spaces in the names of the root folder
This is the kitchen root preview: as we can saw in c:\XDA
Yes unrar it on C: and call it XDA to avoid the large name issues at CMD!
Inspecting the Facility
We must to create an estructure like this (i will just point you the folders by now, we will fill them later)
C:
-XDA
--TOOLS
--My Tools
--ROM
---<Yourdevicename>
----<Buildnumber>
---Shared
----<Buildnumber>
--OEM
---<Yourdevicename>
----COMMON
----<LangCode>
--EXT
---<Yourdevicename>
----<Buildnumber>
----COMMON
---Shared
--SYS
---<Buildnumber>
----DPI_XXX
-----COMMON
-----<Langcode>
----DPI_XXX_RESH_XXX_RESV_XXX
-----COMMON
-----<Langcode>
----Shared
-----COMMON
-----<Langcode>
Other folders like temp, release XXXXX, build log, are autocreated by the kitchen
Open your kitchen_build_rom.bat it must be on the TOOLS folder(right mouse click select "edit") and open it in wordpad to modify it... you will see this line (black line)
Code:
set ROMHDR=ROM\%device%\romhdr.bin
set XIP_PATTERNS=ROM\%DEVICE%\%xipbuild%\*;ROM\SHARED\%xipbuild%\*
set OEM_PATTERNS=OEM\%device%\COMMON\*;OEM\%device%\%locale%\*
set SYS_PATTERNS=SYS\%sysbuild%\SHARED\COMMON\*;SYS\%sysbuild%\SHARED\%LOCALE%\*;SYS\%sysbuild%\%dpi%\COMMON\*;SYS\%sysbuild%\%dpi%\%LOCALE%\*;SYS\%sysbuild%\%res%\COMMON\*;SYS\%sysbuild%\%res%\%LOCALE%\*
set EXT_PATTERNS=EXT\%DEVICE%\%EXTBUILD%\*\*;EXT\%DEVICE%\COMMON\*\*;EXT\SHARED\*\*
set DSM_TEMPLATE=%dsm%
set DSM_INCLUDES=*
TOOLS\platformrebuilder.exe
[B][SIZE="4"]if not "%errorlevel%"=="0" goto error[/SIZE][/B]
REM===========================================================================================
Modify the line write "REM" (without quotes) before the line and a space it must be like this
Code:
set ROMHDR=ROM\%device%\romhdr.bin
set XIP_PATTERNS=ROM\%DEVICE%\%xipbuild%\*;ROM\SHARED\%xipbuild%\*
set OEM_PATTERNS=OEM\%device%\COMMON\*;OEM\%device%\%locale%\*
set SYS_PATTERNS=SYS\%sysbuild%\SHARED\COMMON\*;SYS\%sysbuild%\SHARED\%LOCALE%\*;SYS\%sysbuild%\%dpi%\COMMON\*;SYS\%sysbuild%\%dpi%\%LOCALE%\*;SYS\%sysbuild%\%res%\COMMON\*;SYS\%sysbuild%\%res%\%LOCALE%\*
set EXT_PATTERNS=EXT\%DEVICE%\%EXTBUILD%\*\*;EXT\%DEVICE%\COMMON\*\*;EXT\SHARED\*\*
set DSM_TEMPLATE=%dsm%
set DSM_INCLUDES=*
TOOLS\platformrebuilder.exe
[B][SIZE="4"]REM if not "%errorlevel%"=="0" goto error[/SIZE][/B]
REM===========================================================================================
Change this line with the name of your device, (by default it says kaiser) as you can see i set -hermes
Code:
[B]set MERGILO= ..\TOOLS\IMGFS\NBMerge [U]-hermes[/U] OS-new.nb[/B]
set LOCALE=0409
set BUILD=Premium
set DPI=DPI_96
set RES=DPI_96_RESH_240_RESV_320
set DEVICE=HERMES
set OLDKERNEL=
Save the changes.
FOLDERS EXPLANATION!!!!!
EXT Folder
The External packages (EXT) folder is divided into Device Specific folders and a Shared folder.
*Device Specific folders are typically used for files (packages) that should only be applied to a specific type of the device.
-Each Device Specific folder is further divided into Operating System Build Version Specific folders and a Common folder.
ººOperating System Build Version Specific folders are typically used for files (packages) that should only be applied to a specific build (version) of Operating System
ººThe Common folder is typically used for files (packages) that can be installed on any Operating System build version.
-----------------------------------------------------------------------------
OEM Folder
The OEM folder can contain multiple Device Specific folders.
*Device Specific folders are typically used for files (packages) that should only be applied to a specific type of the device.
-Each Device Specific folder is further divided into Locale Specific folders and a Common folder.
ººThe Common folder is typically used for files (packages) that can be installed in any locale – not specific to a language.
ººLocale Specific folders are typically used for files (packages) that should only be applied to a specific locale.
-----------------------------------------------------------------------------
ROM Folder
The ROM folder is divided into Device Specific folders and a Shared folder.
*The Shared folder is typically used for kernel system files that are compatible amongst devices. (MSXIPKERNEL folder)
*Device Specific folders are typically used for kernel system files that should only be applied to a specific type of the device. (OEMXIPKERNEL folder)
-The Shared folder is further divided into Operating System Build Version Specific folders.
ººOperating System Build Version Specific folders are typically used for kernel system files that should only be applied to a specific build (version) of Operating System.
-Each Device Specific folder is further divided into Operating System Build Version Specific folders.
ººOperating System Build Version Specific folders are typically used for kernel system files that should only be applied to a specific build (version) of Operating System.
-----------------------------------------------------------------------------
SYS Folder
The system (SYS) folder is divided into Operating System Build Version Specific folders.
*The Build Version Specific folders will often contain files (packages) specific to the device DPI (Dot Per Inch) and Horizontal/Vertical display size.
-Each Operating System Build Version Specific folder is further divided into a ROM DPI, ROM Resolution, and Shared folder – providing a significant amount of flexibility during ROM compilation.
ººThe ROM DPI, ROM Resolution, and Shared folders are further divided into Locale Specific folders and a Common folder.
···The Common folder is typically used for system files (packages) that can be installed in any locale – not specific to a language.
···Locale Specific folders are typically used for system files (packages) that should only be applied to a specific locale – for example, 0409 (English).
DUMPING THE ORIGINAL ROM
We need to get any stock rom we have floating around (check the thread called shipped roms collection stickied
change the extension from exe to rar and we just need the RUU_Signed.nbh file put it somewhere in your PC
If you have a diferent language ROM than english i will suggest you to start with english lang code 0409 cause almost all the pkgs are easy to get in 0409... maybe i will make anothe rtutorial to translate that pkgs to your native lang
Here is a list of Language codes (thanks Da_G)
0401 SAU Arabic المملكة العربية السعودية
0403 ESP Catalan España
0404 CHT Chinese Traditional 台灣
0405 CSY Czech Česká republika
0406 DAN Danish Danmark
0407 DEU German Deutschland
0408 ELL Greek Ellas
0409 USA English United States
040B FIN Finnish Suomen tasavalta
040C FRA French République française
040D HEB Hebrew מְדִינַת יִשְׂרָאֵל
0410 ITA Italian Repubblica Italiana
0411 JPN Japanese 日本
0412 KOR Korean 한국
0413 NLD Dutch Nederland
0414 NOR Norwegian Bokmål
0415 PLK Polish Polska
0416 PTB Portuguese Brasil
0419 RUS Russian Россия
041D SVD Swedish Sverige
0804 CHS Chinese Simplified 中华人民共和国
0816 PTG Portugese Portugal
0c0a ESN Spanish España
Click to expand...
Click to collapse
1.- Download the newest stock rom of your Device and save it in your destop... sometimes the file is an .EXE file so you must to rename it as .rar
2.- Open the rar file, and xtract the file called RUU_Signed.nbh the others we dont need them anymore,
*3.- Put your nbh file in a folder into your kitchen root direction.. a folder called STOCK
*4.- Sometimes the RUU signed nbh is inside another exe calle RUU inside.exe do the same operation xtract it and chege the name to rar... you will find the nbh now.
Xplain IMAGES
5.- Execute your Erviuskitchen.exe.... (its no problem if the kitchen tells you that there arent some folders... of course are missing say OK to all)
6.- We must to hit the DUMP button, Search in our STOCK folder for our nbh file
7.- the kitchen will dump the rom
** the kitchen will ask you to type the name of your device
Its a huge task so let it run.... it must say dump succesfully now you will have a new folder called DUMP inside you will find more folders like a fresh new kitchen, cut the OEM and ROM folder and paste them to our main kitchen.
The OEM folder must contains a folder with the name of our device and inside it will have three folders... .VM, COMMON and 0409.
The ROM folder will contains a folder with a build number and inside a folder called OEMXIPKERNEL (this is the device's kernel (The kernel version will be accordly to the dumped rom, if you dump a WM6 rom you will have native 6.0 kernel)
the rom folder will contains three files: romhdr.bin, xip.bin and the payload... you can delete the info.txt file
Then go to the folder SYS\<buildnumber>\SHARED\COMMON\ and cut the folder wincenls_WWE and paste it to OEM\<Device>\COMMON\ this file never change and is needed to boot, so if we add it into the oem we never forget it
Now you can move the STOCK folder out of the kitchen, and our kitchen looks like this
Now you need to go the 6.5 Initflashfiles.dat repository thread and download the PKG that contains all the langs... and choose the WWE iniflashfiles.dat check the main sticky thread to locate the repository thread.
The initflashfiles.dat is the file that will set the specific 6.5 file structure, so in WM6.5 it change a lot since 6.1 and 6, so we must to overwrite the one in our folder OEM\<device>\0409\OEM_lang_0409\
Continue...
!!!!!Setting up the ROM and SYS!!!!!
First of all:
As we most know there are NATIVE 6.5 NKs but the repository thread is updating , get them here
This is just the OEMXIPKERNEL and the bin files, this is the Device Kernel Part
As you can see in the image you must to put in the ((ROM\Devicename\Buildnumber\))
the folder OEMxipkernel that is included into the native kernel downloaded file
The "XIP.bin" "romhdr.bin" and the "payload" in ((ROM\Devicename\))
(so we have now to get the MSXIPKERNEL)
The MSXIPKERNEL is the build OS specific kernel part, so...
The kitchen will takes the OEMXIPKERNEL (the native 6.5 NK) and the MSXIPKERNEL for the build to be compiled, and we could have the kernel complete. the kitchen will port the xip.bin for us.
The MSXIPKERNELLTK folder (Logo Tool Kit) Is not needed, it has just a .DSM that allows the carrier to make important fixes and upgrades to their ROMs (But they didnt use it) so we dont need it anymore.
where to get the MSXIPkernel??? go to the Latest SYSs & OEMs thread and download any build you wish to cook... there are many other threads that offers the new builds, please check the Main sticky thread of chef central HERE.
If you download a new build Rollup pkg (200 MB), you will have all the SYS pkgs and the MSXIPKERNEL inside... in one folder!
If you download a stripped build pkg (from 50MB to 70MB), you will have (maybe) all the SYS pkgs already arranged in EVK format!
I invite you to read the Da_G guide to know all the pkgs inside a rollup rar file this way you can get more info about all the pkgs.
There are many tools to set the rollup pkgs into EVK format... I like to use THIS
Here I have a video to xplain how to use it (spanish only sorry i need a translator )
lets see graphically how the SYS rollup is and how this tool make the job for us
1.- I create a folder called New Build
2.- Donwloaded the packer.jar
3.- Downloaded the rollup pkg new build 23563
4.- Unrar the rollup pkg into a folder called SYS
Then RUN the packer.jar follow the instructions as the developer of Packer.jar says in his thread
and we will have all the sys in a folder called Build (rename this folder to 23563, cause is the name of the new build number we downloaded) and now is sorted into EVK format like this...
**Note: in the packer i set lang 0409, dpi 96, resh 240, resv 320, cause my device is QVGA and i want to cook in 0409 lang.
Now we must to open the shared\common folder in our new sys 23563 folder...
We must to locate some pkgs that we will not use whats the reason to delete this pkgs? the reason if you have red the Da_G sys rollups info, is beacuse we are cooking for 0409, most of this pkgs like EA and complexscripts and sipar , msim and others are for MiddleAsia ROMS.
1.- We are cooking for 0409 se just need the pkgs with the name NonEA, so we can delete the pkgs called EA and AH.
2.- If we have Native kernel 6.5 we will use Modules instead of files so we can erase the pkgs called Baseappsfiles, Osfiles and MediaOsFiles, so we kept osmodules, baseappsmodules and mediaosmodules.
3.- delete complexscript_fonts, gb18030, msxipkernelLTK, nonephone, riched20_CS, RIL710MUX, SIPAR, MSIMAR, Uniscribe, webviewCS, wincenls_WWE (cause we already have it in OEM folder) and the xip.bin cause we dont need it.
Well, its time to create in the root kitchen folder, a new folder called SYS, and move the entire 23563 folder into the SYS folder.
as you may see in the picture, there is the MSXIPKERNEL folder...
1.- Go to your ROM\SHARED folder and create a folder called 23563, cut that MSXIPKERNEL inside SYS\shared\common and paste it to the new ROM\SHARED\23563 folder, and we will have now the OS specific part of our ROM.
2.- If you downloaded the native 6.5 kernel you must to rename the folder XXXXX (build number) to "23563" into "ROM\<device>\" so now the Device Kernel match to the OS kernel and SYS build number... that three elements are now set as 23563
And the kitchen root looks like this now:
At this point we have:
6.5.X 23563 SYS
6.5.X 23563 OS Kernel
6.5 Native Device kernel
Old OEM drivers and Main apps (you can switch to newer drivers searching for them i actually have some OLD WM6 and some NEW WP6.5 HD2 Drivers)
But what about the EXT PKGS????
You can add more today plugins, other third party apps, and/or tweaks by making EXT PKGS you can read a lot of info about this new PKGS or you can add them into the OEM\Common folder if you have OEM PKGS.
How?
Well the structure is almost the same as all in the kitchen
C:\
-XDA
--EXT
----<Buildnumber>
------COM5 Tricks
--------Beta Expiry Watermark
------BUILD IMAGES
--------Welcomehead
----COMMON
------Multimedia
--------Camera 6.0
--------HTC leo album
------Tweaks
--------NewIcons
--------Performance
--------Registry fixes
------Addons
--------Coreplayer
--------Youtube player
--------Adobe reader
--------Cfacebook plugin
Etc etc etc....
And we are good to go!!!!
WHOOO HOOOO!!!!!!!!!!!! we made it!!!!!!!!! its already set! so this is the kitchen UI, if everything was ok the kitchen launch without troubles if you saw an error check the folders it says (SVN folders don cause troubles at starting the build proces) SO just set the device, XIP, SYS EXT they must match, and select the apps to be installed or not by clickng double.
HAPPY COOKING GUYS!!!!
try it at your OWN risk IM not responsible for damages to your device
Any question about setting the kitchen please ask whatever!!! we will support you
I have here some Video tutorials in my native lang Spanish
Your noob chef +QuePPC
Video Tutorials in Spanish
Part 1
Part 2
Part 3
Part 4
Video Tutorials in English (thanks to lion75y)
http://www.youtube.com/watch?v=mn7TbHcqFgQ
http://www.youtube.com/watch?v=mn7TbHcqFgQ
http://www.youtube.com/watch?v=ptMqPd0wRBI
http://www.youtube.com/watch?v=ad42UBwUhlM
I need one more atm
I finish!!!! you can start here to ask jiji
suddnely my evk stops working..
even when i freshly insatll it it says nbhutility encounter a problem??
Unable to find wincenls_WWE
After I dump the stock .nbh, I'm unable to find the wincenls_WWE folder under the SYS_<buildnumber>_SHARED_COMMON folder. In alpha order in SYS folder it gives folders:
voice command, welcome center, windows live, WWAN
wincenls_WWE folder is not there?
I am building for Diamond(Victor) CDMA.
(Ervius Kitchen did say,
"Copying \Tools folder into new kitchen...
Kitchen builded successfull!!!
=====================================
All Done... Nbh/nb/payload Dumped and ''Kitchen'' created Successfull!!!")
edit:
I did a new dump from the stock .nbh from a Vogue(CDMA sprint touch) and found the winCENLS_WWE folder there. Can I copy that one to the CDMA Diamond one?
yes you can use that wincenls_wwe put it into oem\device\common
+ Que PPC said:
just remember, to have a booting rom, if the rom stucks at first splash screen... is XIP troubles... if the rom stucks at second or welcomehead spalsh screen is omething related to REGS
Keep in mind that you need FWupdate and wincenls_wwe in the rom! for fwupdate you can use the dummy pkg in OEM both, just to dont forget them
Click to expand...
Click to collapse
where should FWupdate and wincenls_wwe be found in the packages? I dont see them anywhere
wincenls_wwe is from your device's source(Device Specific) and FWUpdate could be either the dummy pack or an original pack from a rom's dump.
Regards!
Use the attached PKGS
The wincenls_wwe is notdevice specific... cause it contains the regional settings data.. you can use it in OEM common
The FWUpdate is EXT PKG you can disable the default fwupdate from every new SYS
If your Antivirus detects some threats in the donwload links for EVK, its not true... sometimes antivirus detects osnbtool as a virus... many ppl knows it.
for me every antivirus detect implantxip as win32
mmmm thats why i use the "None Antivirus Pro Edition"
+ Que PPC said:
mmmm thats why i use the "None Antivirus Pro Edition"
Click to expand...
Click to collapse
oh whats that
I dont use antivirus
+ Que PPC said:
I dont use antivirus
Click to expand...
Click to collapse
lol dont u risk your life from internet buddy????
or u r save by god
Hi. Thanks for the tutorial. I'm a noob in cooking.
I have been following your step by step instructions, but I faced two issues:
1. On post#3, I have downloaded the 6.5 native kernel for Topaz, where should place the files? It's not indicated in your post. Do I replace the OEMXIPKERNEL the the stock ROM dump?
2. How do I get the contents of EXT folder? I have followed every step given carefully, but my EXT folder is still empty...
Please help. Thanks!
I add that part sorry for skip it
As you can see in the image you must to put in the ((ROM\Devicename\Buildnumber\))
the folder OEMxipkernel that is included into the native kernel downloaded file
The "XIP.bin" "romhdr.bin" and the "payload" in ((ROM\Devicename\))
(so we have now to get the MSXIPKERNEL)
The MSXIPKERNEL is the build OS specific kernel part, so...
Click to expand...
Click to collapse
hello,
when I import CABs for osKitchen, he always puts "Program Files", "StartUp" and others. I'm Portuguese and my rom does not have these folders are in Portuguese. so to save me work to edit files I created this little application.
And sometimes not create APP.DAT, this little app also creates APP.DAT.
Link:APP.DAT Changer
Little Toturial:
APP.DAT Changer:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1.From: osKitchen always create APP.DAT with that folders
2.To: Destination folder in Windows Mobile
3.Click here to change APP.DAT.
APP.DAT Creator:
1.Name of destinations folders in Windows Mobile.
2.Click to analyse folder.
after analyse folder appears this screen:
1. Select files to StartUp with windows, i recommend only links.
2.Click to create app.dat
Translation of program:
in path of exe is a file called "ChangeAPP.DAT.exe.config" if you open this file with note path you can translate de program.
And done, now you have changed or created APP.DAT.
I hope you like my application. it´s simple but useful for me.
Attention: I only have tested this with osKitchen, i never used other kitchen.
Next release soon: CabExtractor ->to extract some cabs that do not extract very well oskitchen
Nice app, now life will be a bit easy for NON-English chefs.
Thanks for sharing.
PS. I did correct your post because this line looked as this:
1.FromsKitchen always create APP.DAT with that folders
2.Toestination folder in Windows Mobile
Great tool, thank you for sharing.
If I create multiple language kitchen the app.dat I put in the corresponding
language folder. 0409, 0413, 0408 etc...
Can you modify the tool so that you can pick the language you are cooking for?
Like this:
\0409\app.dat (Program files)
\0413\app.dat (Programma bestanden)
etc...
This way you don't need to modify app.dat each time you are cooking another lang.
Grtz Leo
I have a little problem.
I select the OsKitchen EXT folder but when i click Mudar it doesnt change nothing.
Im curious to know if in ChangeAPP.DAT.exe.config we can add some other folders like Tools,Internet,etc..
Thanks.
Laurentius26 said:
Great tool, thank you for sharing.
If I create multiple language kitchen the app.dat I put in the corresponding
language folder. 0409, 0413, 0408 etc...
Can you modify the tool so that you can pick the language you are cooking for?
Like this:
\0409\app.dat (Program files)
\0413\app.dat (Programma bestanden)
etc...
This way you don't need to modify app.dat each time you are cooking another lang.
Grtz Leo
Click to expand...
Click to collapse
OK, nice sugestion, i do that this weekend
af974 said:
I have a little problem.
I select the OsKitchen EXT folder but when i click Mudar it doesnt change nothing.
Im curious to know if in ChangeAPP.DAT.exe.config we can add some other folders like Tools,Internet,etc..
Thanks.
Click to expand...
Click to collapse
i found a bug, link updated.
i can make more folders options. i will try make a XML with various folders options.
It work fine now,thank you sir
Since you are a so good programmer, i have an idea for haver a better life for us NON English:
When you want to build a TMOUS rom for NON English people you need to manual sort all the Language package.....would be awesome have such an app that auto-sort those packages for you:
Example:
Now we have :
Adobe PDF v2.5.1.0.404840.03
---------files
-----------------0409
My idea is:
Adobe PDF v2.5.1.0.404840.03
--------files
Adobe PDF v2.5.1.0.404840.03
--------0409
Adobe PDF v2.5.1.0.404840.03
--------0410
Adobe PDF v2.5.1.0.404840.03
--------0804
af974 said:
It work fine now,thank you sir
Since you are a so good programmer, i have an idea for haver a better life for us NON English:
When you want to build a TMOUS rom for NON English people you need to manual sort all the Language package.....would be awesome have such an app that auto-sort those packages for you:
Example:
Now we have :
Adobe PDF v2.5.1.0.404840.03
---------files
-----------------0409
My idea is:
Adobe PDF v2.5.1.0.404840.03
--------files
Adobe PDF v2.5.1.0.404840.03
--------0409
Adobe PDF v2.5.1.0.404840.03
--------0410
Adobe PDF v2.5.1.0.404840.03
--------0804
Click to expand...
Click to collapse
I think I understand.
you just want to copy the folders that are inside the folder "files" to the same level of the folder "files".
Great application, I already created all the files for 12 languages and it cost me 2 day's to do that, this is really a timesaver.
Thanks
Hint: oskitchen allows using variables for all system folders in the app.dat files.
Ops...sorry i guess i had explain me not well.
What i meant was an app that grab the Language folder from package and put it in another folder with the same package name ,so we should have:
Example:
AdobeReader--> (subfolder) files
AdobeReader_0409-->(subfolder) 0409 (0410,0804,etc..)
anhado said:
I think I understand.
you just want to copy the folders that are inside the folder "files" to the same level of the folder "files".
Click to expand...
Click to collapse
Airxtreme, can you explain this better please?
I dont understand how to use it.
airxtreme said:
Hint: oskitchen allows using variables for all system folders in the app.dat files.
Click to expand...
Click to collapse
af974 said:
Airxtreme, can you explain this better please?
I dont understand how to use it.
Click to expand...
Click to collapse
You put those variables inside the app.dat files and the kitchen will be replace them with the matching localized folder while the ROM is generated.
Thanks Airxtreme, i didnt know that and it is a pretty nice feature indeed.......perhaps,do you think that it will be difficult to have those variables auto-compiled from OsKitchen when you go to import a new cab?...oh well,i fell a bit lazy dont you think? lol
airxtreme said:
You put those variables inside the app.dat files and the kitchen will be replace them with the matching localized folder while the ROM is generated.
Click to expand...
Click to collapse
airxtreme said:
You put those variables inside the app.dat files and the kitchen will be replace them with the matching localized folder while the ROM is generated.
Click to expand...
Click to collapse
Directory("\Windows"):-Directory("Arranque")
Directory("\Windows\Menu Iniciar\Programas"):-Directory("Tools")
Directory("\Programas"):-Directory("ArkSwitch")
Directory("\Windows\Menu Iniciar\Programas\Tools"):-File("ArkSwitch.lnk","\Windows\_ArkSwitch.lnk")
Directory("\Windows\Arranque"):-File("ArkSwitch.lnk","\Windows\_ArkSwitch.lnk")
this is what my app create.
i need to change to
Directory("%Windows%"):-Directory("Arranque")
Directory("%Windows-StartMenu-Programs%"):-Directory("Tools")
Directory("%ProgramFiles% "):-Directory("ArkSwitch")
Directory("%Windows-StartMenu-Programs%\Tools"):-File("ArkSwitch.lnk","\Windows\_ArkSwitch.lnk")
Directory("%Windows-StartUp%"):-File("ArkSwitch.lnk","\Windows\_ArkSwitch.lnk")
and about red? osKitchen creates that but is no necessary, anyway you don't have variables to that.
af974 said:
Ops...sorry i guess i had explain me not well.
What i meant was an app that grab the Language folder from package and put it in another folder with the same package name ,so we should have:
Example:
AdobeReader--> (subfolder) files
AdobeReader_0409-->(subfolder) 0409 (0410,0804,etc..)
Click to expand...
Click to collapse
i don't konw the folder structure of a TMOUS rom for HD2 on osKitchen. now i am downloading a ROM for HD2 tomorrow i imports and try to understand what you want.
Hmm, okay not sure what everybody means, but I think I'm on the same level as af974, what I did to create my kitchen for all the languages I use is just the simple way copy-paste, to give a short example, if I use the camera-pkg, I just have one folder for the camera but I put all the mui-files in the camera-pkg, so I don't have a long list for every language, I did the same with all the other pkg.
Maybe a lot of people are gonna laugh because they now an easier way, but I did it on the 12th of september when the server was down, so I had all the time of the world
Greetz,
Yes like this:
Camera\0409\0408\0413 etc...
What I do is place the app.dat in every language folder and modify the path by hand.
Camera\0409\app.dat = start menu\example.lnk
Camera\0413\app.dat = Startmenu\example.lnk
Now in the kitchen I can set the language and it automatic pics the appropiate app.dat.
Rataplan said:
Hmm, okay not sure what everybody means, but I think I'm on the same level as af974, what I did to create my kitchen for all the languages I use is just the simple way copy-paste, to give a short example, if I use the camera-pkg, I just have one folder for the camera but I put all the mui-files in the camera-pkg, so I don't have a long list for every language, I did the same with all the other pkg.
Maybe a lot of people are gonna laugh because they now an easier way, but I did it on the 12th of september when the server was down, so I had all the time of the world
Greetz,
Click to expand...
Click to collapse
Laurentius26 said:
Yes like this:
Camera\0409\0408\0413 etc...
What I do is place the app.dat in every language folder and modify the path by hand.
Camera\0409\app.dat = start menu\example.lnk
Camera\0413\app.dat = Startmenu\example.lnk
Now in the kitchen I can set the language and it automatic pics the appropiate app.dat.
Click to expand...
Click to collapse
That's what I forgot to do, thanks for the tip, I only edited the initflashes.dat
Greetz,
anhado said:
Directory("\Windows"):-Directory("Arranque")
Directory("\Windows\Menu Iniciar\Programas"):-Directory("Tools")
Directory("\Programas"):-Directory("ArkSwitch")
Directory("\Windows\Menu Iniciar\Programas\Tools"):-File("ArkSwitch.lnk","\Windows\_ArkSwitch.lnk")
Directory("\Windows\Arranque"):-File("ArkSwitch.lnk","\Windows\_ArkSwitch.lnk")
this is what my app create.
i need to change to
Directory("%Windows%"):-Directory("Arranque")
Directory("%Windows-StartMenu-Programs%"):-Directory("Tools")
Directory("%ProgramFiles% "):-Directory("ArkSwitch")
Directory("%Windows-StartMenu-Programs%\Tools"):-File("ArkSwitch.lnk","\Windows\_ArkSwitch.lnk")
Directory("%Windows-StartUp%"):-File("ArkSwitch.lnk","\Windows\_ArkSwitch.lnk")
and about red? osKitchen creates that but is no necessary, anyway you don't have variables to that.
Click to expand...
Click to collapse
The variables are for app.dat files not for initflashfiles.dat where folders like the startup folder should be created. I could allow custom instructions in initflashfiles to create all the system folders since I know where each of them are mapped but I think would be pointless with all the all-languages initflashfiles archives Da_G released.
Thanks for the kitchen Airxtreme,
Yes system files can be set but what about a app.dat for every extended package that needs it?
Maybe I could work straight from initflash but I think creating a app.dat is more save and portable.
airxtreme said:
The variables are for app.dat files not for initflashfiles.dat where folders like the startup folder should be created. I could allow custom instructions in initflashfiles to create all the system folders since I know where each of them are mapped but I think would be pointless with all the all-languages initflashfiles archives Da_G released.
Click to expand...
Click to collapse
Laurentius26 said:
Thanks for the kitchen Airxtreme,
Yes system files can be set but what about a app.dat for every extended package that needs it?
Maybe I could work straight from initflash but I think creating a app.dat is more save and portable.
Click to expand...
Click to collapse
As I said the variables are only for app.dat; having to write the localized folders by hand with this tool is useless because instead of setting the localized path you can use one of the variables I provide and make your app.dat entries compatible with every language, also the kitchen now does all the variables mapping when a CAB file is imported.