Related
Okay, part of this is based on running Linux for the last 7 years. Part is assumption and part is what I have gathered from Motorola 3rd Level Techs/Devs and ATT. We all know the phone is just released. I think it is a totally nice phone. Initially, I had problems with one major thing -- being able to use wifi. I think I found an app called Android Status which basically can show you a view of netstat -lnt. EVERY socket is running on tcp6. Now this is a world/quad band phone so it needs IPV4/6. I was connected to my router and could see a udp connection pinging really fast from the phone to router and disappearing. The wierd thing is the tcp6 sockets are looking like IPV4 addresses. I am assuming a tunnel of some sort.
When I called ATT their line was, "I'm sorry we don't support home wifi's." So I went to one of their wifi HotSpots and I can join but get kicked off for supposed none eligibility for access. ATT swears I am all set. But I loved telling them that I'm sorry I don't support ATT HotSpot technical difficulities. I "fixed" my issue by adding my own DNS servers and making a static IP on my wifi network. I don't have or want to use the time to "fix" ATT. I just want it to work. This issue with wifi is seeming to be occuring on the IPhone4 and Windows Phones being released. I'm betting it's the same problem.
Linux by default comes with IPV6 on in the kernel. So if it is to be a world phone they have to have support. Another option for techies is to blacklist IPV6. "If" you've rooted your phone. OR wait for Motorola/ATT to put out a patch/toggle switch like is done with wifi, GPS, BT and the like so a user can toggle wifi support based on where they are travelling or living in the world. This last to me seems to be the best idea.
Now for the techie in me I don't travel overseas or in a native IPV6 country at all. So I would rather just blacklist the file. Wifi right now is running about as fast as a squashed snail on a hot day because it is looking for both sets of addresses. My kernel is old 2.6.29, and it has Android 2.1.1 but I would like to go to the most current Froyo. Looking in this section of the forum seems to have Debian directions: I run ArchLinux. Though using Astro FM there is dpkg stuff inside the FS of the phone. Or the instructions are for Windows, which don't help me at all either. Plus I want to get rid of some of this garbageware ATT has put on the phone itself.
So in closing I would like Froyo if in my best interests, and that it changes the kernel. But I have to shut off IPV6 at config/module level, and not at kernel level.
dap
This phone DOES ROOT with Z4root app with no issues I can detect. Loading a new busybox also doesn't seem to cause any issues.
Hi,
Firstly I should introduce myself, my name is George, live in Essex and have a passion for cars and gadgets.
I've been roaming this forum since I had my first android device a HTC Hero and try and use search as much as possible rather than repeating other peoples problems but I am properly stuck with this one..
To be short,
Device Details:
Device: Google Nexus 4
Android Version: 4.2.1
Carrier: Orange (EE)
Problem: Portable hotspot is active and I can connect to it from various devices but there is no data pass through.
Solutions tried:
Changing the APN type to every possible solution mentioned (i.e consumer broadband etc)
Using both open and sercured sercurity on the hotspot
Connecting using everything from another phone to my Google Chromebook and all imbetween
I've read there has been mention of Orange blocking this but most people find this isn't the case and its usually fixed via the APN.
The only thing that looks slightly odd is that an ipconfig on my windows machine(s) shows 192.168.xxx.xxx yet the IP address displayed by my Nexus is 10.166.xxx.xxx and if I ping my Nexus's IP from my machine i do get a response.... (all when connected to the hotspot)
Even with a ip release/renew still picks up 192.168
So that is my issue....
I can't think of anything else bar a factory reset which i'd rather not do just yet so thought i'd ask here first I geuinely searched everywhere!
any help would be much appreciated....
Don't mean to bump this but if anyone could offer any advice it would be much appreciated!
Even if someone could just confirm they are using the Orange/EE network with the Nexus 4 and has it working?
Thank you!!
i'm also on orange (EE).
bummer. mine's not working either. i thought it was but i think i was connecting to my router's wifi instead.
i also tried bluetooth tethering but couldn't get that working at all.
A sort of "me too", here: I'm also an Orange (EE) customer who can't get WiFi (or Bluetooth) tethering to work. However, USB tethering works fine - just appears to install a RNDIS virtual Ethernet adapter, and then just works.
Using Wireshark, I noticed that DNS lookups (which use the phone as a DNS server/ proxy) actually work. However, SYNs for connections to hosts on the Internet go unanswered. I'm beginning to suspect that the phone just isn't forwarding packets from the WiFi interface to the cell interface (but no idea why)
As a sort of aside: I'm pretty sure this used to work on my Motorola Atrix via Orange.
Having the exact same problem, running CM10.1.
Have messed around with APN settings but does nothing, laptop connects phone and even shows as having internet access but trying to visit any site just times out.
I have tried the exact same hotspot configuration with a giffgaff (O2) sim card and it works fine, so it must be Orange!
Every day I go to my local coffee shop. When I want to connect to the net, my Nexus shows wifi points available and I choose the appropriate one for the cafe. It doesn't need a password, but it does show a webpage where you have to agree to the terms by click the Ok button.
Is there anyway to automate this, or get around this? Its such a pain in the ass! I have Tasker if that makes any difference.
Thanks,
Jon
That is called a captive portal and no.
Or called a splash page. I worked for a hotel wifi company and we used devices called "nomadix." When you connect, the device gives you an IP, then sticks you in a pending stage until you click OK or Accept on the portal page. Until then, it won't let any IP based traffic through. Usually there's a timeout that they can modify. But being in a cafe, I highly doubt it. They're probably using a walmart bought wifi router with ddwrt firmware. I know starbucks has a splash page for their wifi.
Well, there is *sort* of a way around it, but not very convenient for cafes/etc. I am currently staying at a hotel that has said portal to access the WiFi network. What I have done is connected to said WiFi network with my laptop, then utilized "connectify" to re-transmit that authorized WiFi to me and my wife's devices. Basically turning my laptop into a wireless router. Another plus is that I can set my own WEP/WPA/etc protection to the retransmitted signal. So while this may not be a solution for cafes, etc - it certainly is a fantastic one for hotels!
Sent from my Nexus 7 using Tapatalk 4
I believe there are a few apps in the market which can automate this for some portals, but it's basically just scraping the page and trying to guess some information to put in, etc, so it won't work 100% of the time.
I haven't used any, so no specific suggestions, but here's a few from search:
https://play.google.com/store/search?q=wifi login
i have this exact problem with the wifi in the pub i chef in. our broadband is provided by HEINEKEN beer. we also must connect then load browser window to accept terms.
the pub owner would also like it removed to allow people to auto-connect in the normal way because obviously when a customer steps outside for a ciggerette as it is illegal to smoke inside a public place in the uk now,. they would then need to keep re-connecting theyre phones/tablets...
ive managed to switch a total of 8 staff and about 25 customers to ditching ios for android there normaly at least 3 nexus 7's at any one time in my pub now :victory::victory: and our bar now also has nfc tags.
The app Wi-fi web login seems to be working for me.
Is there anyway of using the super hub 1 from virgin media to act as a wifi extender/repeater?
I currently have a super hub 2 connected but in some spots of the house i cant access wifi or its a poor signal so o was tjinking if it is possible to create a wifi extender from the super hub 1? Any help would be appreciated, and thanks.
skyla20 said:
Is there anyway of using the super hub 1 from virgin media to act as a wifi extender/repeater?
I currently have a super hub 2 connected but in some spots of the house i cant access wifi or its a poor signal so o was tjinking if it is possible to create a wifi extender from the super hub 1? Any help would be appreciated, and thanks.
Click to expand...
Click to collapse
It is possible, the easest way is to first change some settings on your old hub, you will need to disable built in features such as the DHCP, secondly you may need to change the old hubs ip, if it is the same as the new one, to prevent a ip address conflict (for example, if they are both using 192.168.1.254 though if yours is an old netgear tg834? Then its probably using 192.168.1.1) , now assuming your old super hub supports the same wireless encryption as the new one, match the wireless ESSID (name) and encryption password (And type! Such as wpa2) so that they appear as the same Wireless network (distributed wireless) and the easesst and most supported method is to then link the two devices via ethernet and place one of them somewhere else in the building where it can provide a signal in the blindspots of your primary superhub.
Also a side not.. If i recall, the most recent superhub uses 802.11n on 5GHz, which does not boad well in old victorian houses, and new ones made with lots of metal strips between plaster boards.. 2.4GHz works better at penetrating walls, so check you dont have this option set to 5GHz under the wireless settings.
tytiger said:
It is possible, the easest way is to first change some settings on your old hub, you will need to disable built in features such as the DHCP, secondly you may need to change the old hubs ip, if it is the same as the new one, to prevent a ip address conflict (for example, if they are both using 192.168.1.254 though if yours is an old netgear tg834? Then its probably using 192.168.1.1) , now assuming your old super hub supports the same wireless encryption as the new one, match the wireless ESSID (name) and encryption password (And type! Such as wpa2) so that they appear as the same Wireless network (distributed wireless) and the easesst and most supported method is to then link the two devices via ethernet and place one of them somewhere else in the building where it can provide a signal in the blindspots of your primary superhub.
Also a side not.. If i recall, the most recent superhub uses 802.11n on 5GHz, which does not boad well in old victorian houses, and new ones made with lots of metal strips between plaster boards.. 2.4GHz works better at penetrating walls, so check you dont have this option set to 5GHz under the wireless settings.
Click to expand...
Click to collapse
Ok i will check all that out soon as i have time but thanks also. The house is made in 1970's it is strange that im not getting good signal in the garage room the wireless hub is situated in the living room downstairs then theres a brick wall then the hall way withthe stairs in the middle another small brick wall which leads to the garage room. I get signal but its poor. Would a netgear wifi extender work the one on the net for about £40 if the super hub 1 idea didnt work?
Sent from my iPhone using Tapatalk
skyla20 said:
Ok i will check all that out soon as i have time but thanks also. The house is made in 1970's it is strange that im not getting good signal in the garage room the wireless hub is situated in the living room downstairs then theres a brick wall then the hall way withthe stairs in the middle another small brick wall which leads to the garage room. I get signal but its poor. Would a netgear wifi extender work the one on the net for about £40 if the super hub 1 idea didnt work?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Yes, any off the shelf Signal "Booster" device should work, I use one at work and it's essentially a small WiFi device that connects to a specified Access point (in your case the super hub) and re-broadcasts the same network settings from it's own wireless card, forwarding any data to and from the original access point like a wireless bridge. the only down side is there is usually a slight decrease in bandwidth with this method, where as using multiple wireless access points, hard-wired in to a network via Ethernet all have their own dedicated connection providing maximum bandwidth. Hope that helps and isn't too technical
tytiger said:
Yes, any off the shelf Signal "Booster" device should work, I use one at work and it's essentially a small WiFi device that connects to a specified Access point (in your case the super hub) and re-broadcasts the same network settings from it's own wireless card, forwarding any data to and from the original access point like a wireless bridge. the only down side is there is usually a slight decrease in bandwidth with this method, where as using multiple wireless access points, hard-wired in to a network via Ethernet all have their own dedicated connection providing maximum bandwidth. Hope that helps and isn't too technical
Click to expand...
Click to collapse
I full understand, soon as i get some spare time i will try the settings on the hub etc, if no luvk with that then i will look towards on getting the wifi extender preferably the netgear with two sntennas on for £40, i did hear that that one is only 2.4ghz. Oh well fingers crossed somthing works.
skyla20 said:
I full understand, soon as i get some spare time i will try the settings on the hub etc, if no luvk with that then i will look towards on getting the wifi extender preferably the netgear with two sntennas on for £40, i did hear that that one is only 2.4ghz. Oh well fingers crossed somthing works.
Click to expand...
Click to collapse
If im not mistaken again (the VM Superhub in my experience is the one at the office) it broadcasts on 2.5 and 5GHz simultaneously, so you may get away with it, the repeater would use the 2.4Ghz band for it's distribution link, and any devices close enough (and supporting) could use the 5GHz band, which in theory would work in your favour, and not effect the repeated signal, giving you a little boost in performance.. this, of course depends on how well the superhub manages its wireless, and i have little faith in it as it is..
Hi Guys,
Firstly, I hope this is posted in the correct section.
Secondly, My name is Mark, and I've followed this site/forum for a few years now, and have successfully rooted 2 old phones (HTC Nexus One & HTC One S) thanks to all the information and guides right here on xda-developers.
Thirdly, is my issue: (the back-story) [tried, tested & failed alternatives]
At work, we've recently invested in a WiFi Internet Radio, to take advantage of the tens of thousands of stations compared to the 20 or so offered on DAB/FM. Getting it connected to the internet however has been a struggle.
The offices Wired & Wireless LAN networks are locked by a pin, which nobody knows, or will give out, this network is for official business use only, by the companies own equipment. Also network tabs in the computers control panel are blocked, so these pins are completely unobtainable. There is a WiFi hotspot nearby, this is setup and ran by "The Cloud" (aka Sky). When we try to connect to this network directly from the radio, it asks for a pin, however to use these hot spots you have to register a username & password on a browser to be granted access, again, not possible with the radio. 3G/4G is very limited in the building due to the location of the building, and (we think) a chrome window tint that runs all the way around the building, We've tried, the radio can find and connect to the phone, but the phone can't connect to the internet via 3g. Even if 3g was good, it'd be very data consuming to be running radio over portable WiFi hotspot for 52 hours a week.
So what I want to do, if it's possible, is to share my WiFi connection (to the hotspot) over WiFi or USB (to the radio), using my phone as a WiFi repeater/modem in between. Or perhaps there's another alternative I've missed? I'm not overly sure on the ins and outs of usb modems and other networking hardware.
The phone is a Sony Xperia Z2 (currently not rooted, but willing to root if needs be to make this work)
The radio is a Roberts Stream 93i (has WiFi, ethernet & USB)
And in case anyone mentions, there is a STRICT ban on phones, ipods (and anything that connects to the internet) due to the confidential nature of our work, if this wasn't the case we'd just of bought a pair of speakers and streamed the internet radio on our phones.
Thanks for your help, I've been searching high & low for 3 straight days now!
Stoneyworth said:
Hi Guys,
Firstly, I hope this is posted in the correct section.
Secondly, My name is Mark, and I've followed this site/forum for a few years now, and have successfully rooted 2 old phones (HTC Nexus One & HTC One S) thanks to all the information and guides right here on xda-developers.
Thirdly, is my issue: (the back-story) [tried, tested & failed alternatives]
At work, we've recently invested in a WiFi Internet Radio, to take advantage of the tens of thousands of stations compared to the 20 or so offered on DAB/FM. Getting it connected to the internet however has been a struggle.
The offices Wired & Wireless LAN networks are locked by a pin, which nobody knows, or will give out, this network is for official business use only, by the companies own equipment. Also network tabs in the computers control panel are blocked, so these pins are completely unobtainable. There is a WiFi hotspot nearby, this is setup and ran by "The Cloud" (aka Sky). When we try to connect to this network directly from the radio, it asks for a pin, however to use these hot spots you have to register a username & password on a browser to be granted access, again, not possible with the radio. 3G/4G is very limited in the building due to the location of the building, and (we think) a chrome window tint that runs all the way around the building, We've tried, the radio can find and connect to the phone, but the phone can't connect to the internet via 3g. Even if 3g was good, it'd be very data consuming to be running radio over portable WiFi hotspot for 52 hours a week.
So what I want to do, if it's possible, is to share my WiFi connection (to the hotspot) over WiFi or USB (to the radio), using my phone as a WiFi repeater/modem in between. Or perhaps there's another alternative I've missed? I'm not overly sure on the ins and outs of usb modems and other networking hardware.
The phone is a Sony Xperia Z2 (currently not rooted, but willing to root if needs be to make this work)
The radio is a Roberts Stream 93i (has WiFi, ethernet & USB)
And in case anyone mentions, there is a STRICT ban on phones, ipods (and anything that connects to the internet) due to the confidential nature of our work, if this wasn't the case we'd just of bought a pair of speakers and streamed the internet radio on our phones.
Thanks for your help, I've been searching high & low for 3 straight days now!
Click to expand...
Click to collapse
is the radio for the employees to enjoy, or is it being hooked into the building for customer/clients?
if it could be considered to the benefit of customers/clients, just get in touch with IT and see if they have a solution for you. (creating an exception on the netowrk for the radio, maybe?)
If you are simply trying to fly under the radar, and get the thing running, then it sounds like you might be out of luck.
so, you are saying plugging it into an ethernet port, it won't obtain access to the net?
plugging it into a known working port, it also won't work?
you could, try bringing in your own wifi router, plugging that into an open ethernet port (wan) and then see if it grabs net through that.
as i read your previous post, it leads me to believe that there is a PIN you need to input for WIFI & LAN... kind of strange for LAN