Is there anyway to disable the dialer showing Last Call Info?...
When we open the Phone Dialer it should be without Last Call, so even if you press the phone button twice by mistake it doesnt dial the Last Call Number.
Thanks...
This has been happening to both me and my brother's phones for a while. my phone has dcd3.20 and radio rom 3.42.50 My brother's phone is dcd 3.16 with one of the earlier gps enabled radios. we use whatever was the stock dialer for those kitchens. We are both on sprint. yes we should update to the newest rom/radio.
say I wanted to dial a contact named Miranda, so I push the green phone button, dial 6(m,n,o) ,4 (g, h, i) on the keypad and that narrows it down to 1 contact named miranda in this case, I push the green phone button and my phone will make a call. and then when the other party picks up I find out that I called the wrong number.
I swear this morning I even watched the status and it said, "dialing miranda" and showed her number, but when I connected I found out I had the wrong number and then looked at the call status and it displayed someone else's number (this time a number that is not in my contact list, does not contain the numbers 64, and probably not in my last 10 calls)
There have been other cases where dialing the first two or three letters of a contact's name narrows the contact list to a few contacts, then I might use the up or down on the nav button to select the right one and then push the green phone button to dial. And then my phone will call the wrong person, sometimes it calls someone that was not on the narrowed down contact list.
has anyone else had this problem?
This happens to my phone (DCD 3.20) and my bosses phone (DCD3.25) occasionally. I would say for me, it happens my 1 out of 50 times. It will be when I dial a number I have never dialed before--I will type in the complete number, hit send, and then the phone will dial something close to the number from my contacts.
I also have this problem as well with 3.2.6
I was trying to dial a pizza and it had the first 6 digits the same as a AC company I called the same day. I could not get it to dial the right number - even though like you say, it says it is. In the end had to use a friends phone. Only time it has happened to me though.
same
I often experience the same problem.
The way around it is to press the name of the person you want to dial before pressing the green dial button.
I.E. click on the name in the list- EVEN THOUGH it is already highlighted.
works for me.
Still a pain in the ass though.
I believe it has to do with the touch dial skin and smart dialing.
I have the same error on the stock sprint rom with the touch dialer skin installed.
I have also had this isue on multiple versions of DCD roms... not sure if the VZW rom had the issue was I was not on long enought to find out. I ended up calling my bosses cell one night at 1 am.... woops!
I have also had this problem as long as i can remember.
Here is an example to add to the list.
try to dial *72
you cannot simply just dial that.
It will dial the next closest number.
It will only work if I disable smartdial.
Go figure.
Same here. I will type the first two digits on someones name and number and it will only dial those digits even though I selected the name from the list before pushing call.
Clicking on the name just works some of the time. I thought I was going crazy...
So is this a random problem or can it be reproduced? Any of you cooked a DCD rom with the mogul dialer and noticed the same problem?
I hope we can figure out if this is a problem with the dialer or Smart dial itself?
I always get a 10 digit number dialed (from 2-3 digits pressed for smart dialer) , whether or not it is the number I want dialed is another issue.
don't know if there is a way to reproduce it, since it happens only occasionally.
this has been happeneing to all my 6900 users and its driving them/me nuts.
anyone know why its doing this or what a solution mght be?
Dito...
I had the same problem yesterday when trying to get to the EPST screen. The first time I dialed ##778# and realized that I didn't need the ending #. When I put in JUST ##778, it would still try to dial the one I already dialed. I had to delete it from my recent list to get into the menu.
Jon
kept happening over and over the other day again when trying to call miranda from my phone by using the smart dial keypad 6-4. noticed it is dialing 612-599-xxxx instead of her contact number. 612-599-xxxx is the first number that pops up when i just push 6, pushing 4 narrows it down to miranda in my contacts but the phone still dials the first choice for only pushing 6.
so it seems like the smart dialer display is a step ahead of the dialer?
Is it possible to continue viewing gps map:
1. during answering to a phone call?
2. shortly after answering to a phone call, when still talking on the phone?
3. and initiating a phone call?
4. (if the answer to no. 3 is yes) shortly after initiating a phone call, when still talking on the phone?
1 is not possible - the dialer shows up above all other windows.
3 - how can you initiate a phone call without a dialer?
2 and 4 are easy - just press the Back button and you will return to your SatNav app.
vangrieg said:
1 is not possible - the dialer shows up above all other windows.
3 - how can you initiate a phone call without a dialer?
2 and 4 are easy - just press the Back button and you will return to your SatNav app.
Click to expand...
Click to collapse
After pressing the BACK button and returning to gps map, the phone conversation is still going?
harrygol said:
After pressing the BACK button and returning to gps map, the phone conversation is still going?
Click to expand...
Click to collapse
Yes ..... because the HD2 is not an iphone
hi
i found this yesterday tested it today, works great . automatic or 1 touch answering straight to speakerphone and back to tomtom whilst talking and after hangup
http://forum.xda-developers.com/showthread.php?t=582298
regards
marty
Hi all,
I've experienced a long delay when I make a call from a contact details, to be more clear ... when I'm in a contact details screen and I touch for example a mobile number, nothing happen for few seconds (from 2 to 5 seconds) after the screen switch to dial mode and the phone start the dial process ...
Can anyone help me?
Many thanks!
carpe07
Hi all,
I have used differend ROMs and experienced a long delay when I make a call from a contact details, to be more clear ... when I'm in a contact details screen and I touch for example a mobile number, nothing happen for few seconds (from 2 to 5 seconds) after the screen switch to dial mode and the phone start the dial process ...
Can anyone help me?
Many thanks!
carpe07