Related
Helo
I have a major problem with my pda i had bought it a couple a days ago
chnaged the rom etc but now when i try to conect to any wifi acses point it
conects and disconects all the time tried every thing form hard resets changing roms radio roms nothing worked for me any solution or did any one have the same problem.
Sry for the speling eng isnt my native language.
Adrian
Have you tried to flash back to the original ROM to see if you have the same problem?
-MyHTC- said:
Have you tried to flash back to the original ROM to see if you have the same problem?
Click to expand...
Click to collapse
I have intsaled a chinaes repair rom and then installed the rom i was using and went to school when i was the ei tried to connect to one of the hot spots there and the connection was successful didn't disconnect or anything.
But when i came back to my home it all fuxed up again i think it has something to do with the wifi channel im operating on the pda couse i read that sometimes
same chanles interrupt themselves and couses disconnects but dunno how to fix it.
Hi all,
I've had my phone locked on Tele2 (CRO) network which I needed to unlock to be able to use T-mobile SIM. I've used Odin 3.04 and followed the instructions to update modem to I9505XXUFNB9. I've managed to unlock the network this way and use my new SIM but the connection (both phone and mobile data) kept switching on and off constantly.
After that I've tried another firmware, namely I9505XXUFNDG for T-mobile but the problem now is that mobile is almost always off with no possiblity to connect and WiFi is blocked completely (security notification "Your device's security has blocked an action").
Basebands registered properly after every flash.
Phone is not rooted and me not being a power user would just love it to work as it was intended to
Followed the guide, all firmwares downloaded from here
Appreciate any help.
Might be onto something. After reading through this post seems I need to apply WiFi fix but I cannot tell which one to use for my phone (I9505XXUFNDG) as it's not posted. Kernel version 3.4.0-481100.
I've tried I9505_WiFi_FIX_MDM.tar and I9505_WiFi_FIX_MDF.tar but they just messed up the phone completely.
Thx a lot.
impaelas said:
Might be onto something. After reading through this post seems I need to apply WiFi fix but I cannot tell which one to use for my phone (I9505XXUFNDG) as it's not posted. Kernel version 3.4.0-481100.
I've tried I9505_WiFi_FIX_MDM.tar and I9505_WiFi_FIX_MDF.tar but they just messed up the phone completely.
Thx a lot.
Click to expand...
Click to collapse
Hi ,
you should flash the fix for the modem you have installed , try following:
Flash another modem from the list there
Now flash the modem wifi fix for that modem
If still in trouble re flash stock and start all over again.....
MAX 404 said:
Hi ,
you should flash the fix for the modem you have installed , try following:
Flash another modem from the list there
Now flash the modem wifi fix for that modem
If still in trouble re flash stock and start all over again.....
Click to expand...
Click to collapse
Thx, did just that and now it works properly.
Much obliged.
a problem started to show recently; when i select LTE/WCDMA/GSM for auto connect network mode when the mode switches due to signal availability it doesn't get reconnected. i.e. while under LTE it works fine but if i move and get out of reach it should automatically switch to slower network which it doesn't. this works fine if i select WCDMA/GSM then the switches are fine but LTE is not available under this.
one more thing i noticed since i'+ve flashed the phone is that the upper part of the phone gets very very hot (a lot more than before). since the flash i've also had to replace a microSD card which died within weeks (not necessarily connected but worth noting).
any suggestions welcome.
Android: 4.4.2
Baseband: I9505XXUFNB9
Kernel: 3.4.0-481100
Hello,
I've noticed something strange this past month. I was getting data disconnections and I could'nt figure out why. Each time I look at my phone, turning the screen on, mobile network (voice + data) is missing for a few seconds, and comes back.
Now I know that if I keep the screen on for a while (I tried more thant 1 hour), I don't loose the network, but if let the screen go to sleep I immediately loose the network (I don't receive whatsapp messages in background), and when I turn the screen on, it comes back.
Weirdly, when my phone could reach 4G, I had (almost) no disconnection. It only happens in a 3G, edge, or nodata zone.
I changed my carrier (I just moved from europe to New Zealand), and it doen't change the problem.
I'm using CM11-Nightly (sept) on a I9505. I tried installing an old nightly(from july), and it was really full of error messages, so I switched back to a recent nightly, but in the meantime I had no disconnection.
Thank you for your help
noisy_sha said:
Hello,
I've noticed something strange this past month. I was getting data disconnections and I could'nt figure out why. Each time I look at my phone, turning the screen on, mobile network (voice + data) is missing for a few seconds, and comes back.
Now I know that if I keep the screen on for a while (I tried more thant 1 hour), I don't loose the network, but if let the screen go to sleep I immediately loose the network (I don't receive whatsapp messages in background), and when I turn the screen on, it comes back.
Weirdly, when my phone could reach 4G, I had (almost) no disconnection. It only happens in a 3G, edge, or nodata zone.
I changed my carrier (I just moved from europe to New Zealand), and it doen't change the problem.
I'm using CM11-Nightly (sept) on a I9505. I tried installing an old nightly(from july), and it was really full of error messages, so I switched back to a recent nightly, but in the meantime I had no disconnection.
Thank you for your help
Click to expand...
Click to collapse
I don't know exactly where this option is, but it's for battery saving. You can choose that somewhere in your settings I think
I think that's true for Wi-Fi, but I never found it for network.
And now it seems that network won't come back if I don't go to airplane mode and back to normal mode.
I'm having the same problem, seems to mostly affect lollipop installs.
Did you find a solution?
Penetal said:
I'm having the same problem, seems to mostly affect lollipop installs.
Did you find a solution?
Click to expand...
Click to collapse
No I didn't. It seems that somewhere in july 2014, CM11 included a new version of the modem. So every CM11 build after that and every CM12 build is affected (I don't know about other roms).
I read that it was the way the modem handled finding the best network method. With the previous modem (v5 ?) it tried to get LTE, 3G, etc... but now it fails when it fails to get the prefered network.
4 solutions:
- flash the modem (didn't try it, don't know how)
- You're supposed to be able to choose you're prefered network in the options and choose 2G/edge. Didn't work for me but I'm interested in your feedback.
- get an old version of CM11
- live with it (my current option :'( )
There is maybe another solution, I'm not an expert, just a desperate user.
Hey again, I did fix it for myself.
The modem is the problem (I flashed my modem, and my bootloader just to be re-up-to-date).
If you want to get lollipop for yourself you should do it, its not too hard
Its listed as Qustion 14 on this here page: http://forum.xda-developers.com/showthread.php?t=2419762
I don't mind trying to give some pointers if you need help understanding how to do it, but I did this at 5am while sick so my memory of what I did is not 100%, never the less I would like to help if you need it.
Thank you for the advice (you came seeking for one, and ended up helping me ).
How did you choose which modem version to pick up ? the latest ? Do you have to do it after every CM upgrade ?
Edit:
I found the latest version from one of your links : http://forum.xda-developers.com/showthread.php?p=50965837#post50965837
Is the "Combined package - both modems in one flashable file." ok ?
And what does flashing the bootloader do ?
"What it does"... I am not 100%, I assume it initialize some part of the system, HW or kernel level, but I might be way off.
In any case I did use the dual modem pack to flash both "PHONE" and "PDA", another thread I asked in just replied to another user with the neccessity to flash the new bootloader aswell (dont know if the version numbers applies for you):
u must be using a 4.4.2 baseband and bootloader .. just a 4.4.2 baseband will not work .. once updated ur set
Click to expand...
Click to collapse
My question is on this page a bit down, and some replies a bit further down than that:
http://forum.xda-developers.com/showthread.php?t=2735248&page=116
Tip: I had to save the PIT to a file (did it twice to be sure) with heimdall before using odin to flash (couldn't get heimdall to work for that part), all because odin would not play nice inbetween loading the PIT from device and flashing, this might not be a problem for you at all so it's just an FYI.
I managed to flash the modem & the bootloader. So far, no disconnection, so I'm quite happy.
Cheers
Hi Guys,
I am writing this Thread believing that I will get a solution as Yota company has not provided any solution after 15 days trouble shooting. I just brought the phone from Russian seller through eBay.com to India and after 2 months of fight from the local customs office I just got my phone. I was very happy and was floating in air to have the first dual screen phone in my hand. The phone was flawless with dual screen was working awesome. The phone came with lollipop update. I switched on the phone with out inserting the simcard, the phone prompted for a small 350 MB update and I just update the phone. Then I just inserted the Simcard after which i started facing issue. The issue was the phone is able to read and shoe the service provider name but there was no network signal and it was showing only emergency calls. When i tried to make calls it showed network no registered. I tried with different simcard which resulted in the same issue. I though it might be a simcard issue and checked with my old phone but there was no simcard issue. So i just contacted the Yota tech team through mail to help me on this issue. They asked me do some basic troubleshooting but there was no use after 15 days they asked me to ship the phone to nearest service center which is in Russia. The issue is to and back from Russia customs will cost me the price of 2 Yotaphone fist generation phone price. So I through of resolving this issue myself and researched in online. I found that Samsung phones were also facing the same issue after update and tried all the solutions given in internet but there was no use. Finally there was a solution asking to root the phone and install the ariza patch which would solve the issue. I just rooted my phone and when I installed the ariza it showed it was not compilable for yotaphone 2. I just searched in XDA forums and could not find anyone reporting the similar issue with a solution. So I through of creating new thread in hope of getting a solution in this issue. Please help me in this issue by creating a patch or any solution which will me help me out of this. I am not able to use the phone as the basic call function is not even working reset the phone is a heaven.:crying::crying::crying:
bharath9962 said:
Hi Guys,
I am writing this Thread believing that I will get a solution as Yota company has not provided any solution after 15 days trouble shooting. I just brought the phone from Russian seller through eBay.com to India and after 2 months of fight from the local customs office I just got my phone. I was very happy and was floating in air to have the first dual screen phone in my hand. The phone was flawless with dual screen was working awesome. The phone came with lollipop update. I switched on the phone with out inserting the simcard, the phone prompted for a small 350 MB update and I just update the phone. Then I just inserted the Simcard after which i started facing issue. The issue was the phone is able to read and shoe the service provider name but there was no network signal and it was showing only emergency calls. When i tried to make calls it showed network no registered. I tried with different simcard which resulted in the same issue. I though it might be a simcard issue and checked with my old phone but there was no simcard issue. So i just contacted the Yota tech team through mail to help me on this issue. They asked me do some basic troubleshooting but there was no use after 15 days they asked me to ship the phone to nearest service center which is in Russia. The issue is to and back from Russia customs will cost me the price of 2 Yotaphone fist generation phone price. So I through of resolving this issue myself and researched in online. I found that Samsung phones were also facing the same issue after update and tried all the solutions given in internet but there was no use. Finally there was a solution asking to root the phone and install the ariza patch which would solve the issue. I just rooted my phone and when I installed the ariza it showed it was not compilable for yotaphone 2. I just searched in XDA forums and could not find anyone reporting the similar issue with a solution. So I through of creating new thread in hope of getting a solution in this issue. Please help me in this issue by creating a patch or any solution which will me help me out of this. I am not able to use the phone as the basic call function is not even working reset the phone is a heaven.:crying::crying::crying:
Click to expand...
Click to collapse
Do you still have this problem?
I wasn't sure at first, I thought it was my sim card, but I have tried 2 different networks sims and they both get no signal in my Yotaphone 2...
The network's name does appear, so the sim must be being read somewhat, but I always get no signal.
I literally have no idea what to do.
I too turned the phone on without a simcard, flashed the RU latest rom, flashed TWRP, rooted it etc, surely that has nothing to do with it...?
@bharath9962 ! I fixed it!
I have no idea why this happened, and I spent a few hours trying to fix it, very angry. I downgraded to 4.4 to see if it would help, put back the native China rom that came with my phone (accidentally deleted my backup too...)
I bought a new sim card just for this phone because the old one did not 'work'.
This is not a popular phone so it's hard to find information, anyway... I'm very relieved now. I can only imagine you gave up...
I found the answer here - thewichitacomputerguy.com/blog/how-i-fixed-your-sim-card-does-not-allow-connection-network-g1
1. Open the phone dialer
2. Enter: *#*#4636#*#* (Once entered, you will be taken directly to a "Testing" page) [4636 spells INFO]
3. Tap Phone Information
4. Scroll to the bottom of the screen and you should see a button that says radio off. Hit this button and when it reads radio on Hit it again to turn the radio back on. <-- (Not a Typo)
I rebooted and waited a few seconds, no signal. I turned on airplane mode, turned it off, and it worked!
Now I can go back to RU 1.99 and reinstall all my stuff...
cbcbcvcc said:
@bharath9962 ! I fixed it!
I have no idea why this happened, and I spent a few hours trying to fix it, very angry. I downgraded to 4.4 to see if it would help, put back the native China rom that came with my phone (accidentally deleted my backup too...)
I bought a new sim card just for this phone because the old one did not 'work'.
This is not a popular phone so it's hard to find information, anyway... I'm very relieved now. I can only imagine you gave up...
I found the answer here - thewichitacomputerguy.com/blog/how-i-fixed-your-sim-card-does-not-allow-connection-network-g1
1. Open the phone dialer
2. Enter: *#*#4636#*#* (Once entered, you will be taken directly to a "Testing" page) [4636 spells INFO]
3. Tap Phone Information
4. Scroll to the bottom of the screen and you should see a button that says radio off. Hit this button and when it reads radio on Hit it again to turn the radio back on. <-- (Not a Typo)
I rebooted and waited a few seconds, no signal. I turned on airplane mode, turned it off, and it worked!
Now I can go back to RU 1.99 and reinstall all my stuff...
Click to expand...
Click to collapse
@cbcbcvcc may i know which country you are and what type of sim your using. So that i could check my issue accordingly.. And thanks for your reply tp my post as i waa waiting for some one to help for the last 3 months... When hope was vanishing you just showed up.. This help means a lot to me
bharath9962 said:
@cbcbcvcc may i know which country you are and what type of sim your using. So that i could check my issue accordingly.. And thanks for your reply tp my post as i waa waiting for some one to help for the last 3 months... When hope was vanishing you just showed up.. This help means a lot to me
Click to expand...
Click to collapse
My country is in Asia but I believe this does not matter - the problem was that somehow the radio (cell phone function) was 'off'/glitched, and had to be turned on+off to make the phone function again. Using a different country's sim card would not fix this problem.
As I wrote above, we both share the fact that we first turned our phones on with no sim, and updated. Maybe just a coincidence...
Just try the guide and please let me know if it is fixed!
cbcbcvcc said:
My country is in Asia but I believe this does not matter - the problem was that somehow the radio (cell phone function) was 'off'/glitched, and had to be turned on+off to make the phone function again. Using a different country's sim card would not fix this problem.
As I wrote above, we both share the fact that we first turned our phones on with no sim, and updated. Maybe just a coincidence...
Just try the guide and please let me know if it is fixed!
Click to expand...
Click to collapse
Hi cbcbcvcc,
Tried the guide but still no use, I also downgraded the ROM and tried the guide still no use. This is hurting me so bad.. Do you have any other way to resolve the issue please share with me.
No SIM CARD
Hi to All,
suddenly after I did a reset and change the sim card, the Yotaphone is no more recognize the sim card.
I try to install a new rom...nothing
I try to install the Kitkat rom...nothing
I try the method suggested here to use the code *#*#46..... nothing
any help please
Please I have tried the guidelines but the radio refuse to ON. I click on it but not never respond
Hello, I have update my Yotaphone and now I receive WCDMA, but no gsm/edge signal .
I change the Rom (lollipop,kitkat,, HK rom, EU Rom)but I have always the problem :
I receive H, H+. But no Edge/GSM...
Can you help me.
[SOLVED]
Fix for Yotaphone 2 YD206 from China
If you already flashed the phone to latest EU 5.0, you can skip 1-5
1. download via FTP: fw.ydevices.com/YotaPhone2/YotaPhoneFlasher/yotaphone2_flasher.exe and install
2. run flasher and download latest EU rom (2 - 5- 7)
3. turn off the phone and turn it on while holding volume down - this will boot the phone in "downloading..." mode
4. in the flasher press 1 (Flash the cellphone)
5. the phone is now on 5.0.0-EU1.1.124b and 2G is not working at all and 3G is connecting only to 2100 MHz (on my cell network)
6. download via FTP: fw.ydevices.com/YotaPhone2/Firmwares/CN/4.4.3-S01-003-CN1.0.3.32a.zip
7. unzip the file and copy \radio to c:\program files (x86)\yotaphone_flasher
8. run cmd and go to c:\program files (x86)\yotaphone_flasher
9. repeat step 3.
10. run next lines:
fastboot flash modem radio\NON-HLOS.bin
fastboot flash sbl1 radio\sbl1.mbn
fastboot flash rpm radio\rpm.mbn
fastboot flash tz radio\tz.mbn
11. reboot the phone and enjoy 2G and strong 3G signal
manu3556 said:
Hello, I have update my Yotaphone and now I receive WCDMA, but no gsm/edge signal .
I change the Rom (lollipop,kitkat,, HK rom, EU Rom)but I have always the problem :
I receive H, H+. But no Edge/GSM...
Can you help me.
Click to expand...
Click to collapse
good job deepmnd
thanks :good::good::good:
deepmnd said:
Fix for Yotaphone 2 YD206 from China
If you already flashed the phone to latest EU 5.0, you can skip 1-5
1. download via FTP: fw.ydevices.com/YotaPhone2/YotaPhoneFlasher/yotaphone2_flasher.exe and install
2. run flasher and download latest EU rom (2 - 5- 7)
3. turn off the phone and turn it on while holding volume down - this will boot the phone in "downloading..." mode
4. in the flasher press 1 (Flash the cellphone)
5. the phone is now on 5.0.0-EU1.1.124b and 2G is not working at all and 3G is connecting only to 2100 MHz (on my cell network)
6. download via FTP: fw.ydevices.com/YotaPhone2/Firmwares/CN/4.4.3-S01-003-CN1.0.3.32a.zip
7. unzip the file and copy \radio to c:\program files (x86)\yotaphone_flasher
8. run cmd and go to c:\program files (x86)\yotaphone_flasher
9. repeat step 3.
10. run next lines:
fastboot flash modem radio\NON-HLOS.bin
fastboot flash sbl1 radio\sbl1.mbn
fastboot flash rpm radio\rpm.mbn
fastboot flash tz radio\tz.mbn
11. reboot the phone and enjoy 2G and strong 3G signal
Click to expand...
Click to collapse
Hello!
I try to figure out what you did but I get stucked in number 10.
Actually I flashed my Yotaphone with the chinese radio the first time, but I don't get good connectivity.
Anyways I try to do what you wrote, but when I tipe the first line (first fastboot command), cmd keep saying waiting for the device... maybe is that I'm impatient but nothing happens.
I try other USB ports and nothing works...
So actually I don't know if I'm doing it right or if I have to wait for a longer period of time (10 minutes or more).
Any help would much appreciated.
Cheers!
Hi there,
you don't have ADB drivers installed. Google for "universal adb driver" and install. There is driver included with yota 5.0 firmware (C:\Program Files (x86)\yotaphone_flasher\Driver\Google), but any other adb driver should work as well.
And use original yota usb cable!!!
It shouldn't take more that a few seconds for those commands to execute.
MDans said:
Hello!
I try to figure out what you did but I get stucked in number 10.
Actually I flashed my Yotaphone with the chinese radio the first time, but I don't get good connectivity.
Anyways I try to do what you wrote, but when I tipe the first line (first fastboot command), cmd keep saying waiting for the device... maybe is that I'm impatient but nothing happens.
I try other USB ports and nothing works...
So actually I don't know if I'm doing it right or if I have to wait for a longer period of time (10 minutes or more).
Any help would much appreciated.
Cheers!
Click to expand...
Click to collapse
Had the same problem
Hi all, I had the same problem when I flashed russian firmware (YD201) over my phone which originally had honkong firmware (YD206).
I can inform that for me it also worked to flash the Chinese firware with yotaflasher.
However, when I tried to only flash the radio, it seemed it did not work. So I flashed the complete chinese kitkat firmware with yotaflasher and then afterward just removed/renamed the radio folder when flashing the newest russian lollipop firmware. Everything working great now, even was able to do some ota's without any problems since the ota's did not update anything of the radio img's.
And indeed you first need to make sure that you have the fastboot drivers installed and your device gets recognized as fastboot device by your PC.
You can test this by doing "fastboot devices". If you device turns up there as a fastboot devices, then the drivers and connection from pc to phone are ok.
Good Luck!
Thank you deepmnd and tomgaga.
Actually I had to activate developer options... And then reinstall the ADB cause, aparently I had it but it didn't work.
After that the instructions worked perfectly, but I still have network issues.
I don't know if it is because I have a MVNO (Mobile virtual network operator) and the phone has to change between the networks ( the one that provides the network and the MVNO).
I think that when it changes from one net to the other is when I lose connectivity and sometimes I have to search the network and choose it manually.
So this problem actually happened to me and the solution was to activate Roaming services (but I dont' know if is actually the same problem).
Anyways I can see that I connect to EDGE, HSPA/HSDPA and LTE.
For sure there is a way to monitor the network and check wich ones works.
Another guess is that being a phone for the chinese market, and the lack of the 900mhz band is causing this ¿?
So at the moment I'm losing signal just by walking on the street and I live in a big city. It seems that LTE and H works fine but I don't have a a way to assure this.
When I will have a spare time I will try to reflash the phone with the instructions deepmnd provided and see if it will work.
Thank you for your help!
Any advice will be appreciated!!
Update:
I try tomgaga approach I will test it just to see if is the network or my provider
Does anybody know which bands different firmwares support?
Reception is incredibly bad in my case (206 flashed with EU firmware).
It'd be nice if somebody has any info on unlocking different bands for yotaphone2.
kbal said:
Does anybody know which bands different firmwares support?
Reception is incredibly bad in my case (206 flashed with EU firmware).
It'd be nice if somebody has any info on unlocking different bands for yotaphone2.
Click to expand...
Click to collapse
Here you have the bands
https://www.frequencycheck.com/compare-devices/qkjseR/yota-yotaphone-2-yd201/yota-yotaphone-2-yd206
I have the same problem as you, I will try this weekend to downgrade to the older chinese rom and check if the reception get better.
And if then to the latest RU rom.
MDans said:
Here you have the bands
https://www.frequencycheck.com/compare-devices/qkjseR/yota-yotaphone-2-yd201/yota-yotaphone-2-yd206
I have the same problem as you, I will try this weekend to downgrade to the older chinese rom and check if the reception get better.
And if then to the latest RU rom.
Click to expand...
Click to collapse
Thanks for that, it helps a lot to clear the situation regarding the two models.
Now, taking in account deepmnd´s solution above, would it be possible to find those missing bands from the original 206 which are not available to the updated (and then international, 201-) version and add them individually, file by file via the fastboot flashing?
I followed deepmnd's instructions, and my phone now connects to GSM/EDGE, which was not possible before using the EU Radio (latest EU rom). Thanks for this!
Unfortunately it now preferably (!) connects to EDGE, although the LTE/WCDMA-Option is prioritized. I can force the phone to connect to WCDMA by using the WCDMA-only-option, but in this case it does not commit a fallback to EDGE if 3G is missing and I have no connectivity at all, unless I change the band-options and force a connect to EDGE. I'd like it to switch between the bands automatically, as my YD201 did without problems (in Germany).
Any hints to solve this problem?
Thanks in advance, Knut
deepmnd said:
Fix for Yotaphone 2 YD206 from China
If you already flashed the phone to latest EU 5.0, you can skip 1-5
1. download via FTP: fw.ydevices.com/YotaPhone2/YotaPhoneFlasher/yotaphone2_flasher.exe and install
2. run flasher and download latest EU rom (2 - 5- 7)
3. turn off the phone and turn it on while holding volume down - this will boot the phone in "downloading..." mode
4. in the flasher press 1 (Flash the cellphone)
5. the phone is now on 5.0.0-EU1.1.124b and 2G is not working at all and 3G is connecting only to 2100 MHz (on my cell network)
6. download via FTP: fw.ydevices.com/YotaPhone2/Firmwares/CN/4.4.3-S01-003-CN1.0.3.32a.zip
7. unzip the file and copy \radio to c:\program files (x86)\yotaphone_flasher
8. run cmd and go to c:\program files (x86)\yotaphone_flasher
9. repeat step 3.
10. run next lines:
fastboot flash modem radio\NON-HLOS.bin
fastboot flash sbl1 radio\sbl1.mbn
fastboot flash rpm radio\rpm.mbn
fastboot flash tz radio\tz.mbn
11. reboot the phone and enjoy 2G and strong 3G signal
Click to expand...
Click to collapse
Thank you! I had missed calls and did not know what caused them. Then I noticed this happened when I was not on LTE network but on WCDMA or 2G network. And this seems to have solved the issue for me as well.
Hello guys,im expiriencing strange issue with wifi in last couple of weeks.Im sorry if someone already posted thread with this issue,i couldnt find it anywhere on XDA.
Here is the problem:
i have sm n9005 and i was using stock 5.0 first,and then decided to try some custom roms.It was all good,and i changed couple of those.
At one point,i did firmware/bootloader update for some of the roms,i cant remember which one exactly,and phone started to act strange.
It could only see and connect known wifi networks (my home and work ones) and as much scanning i used,it simply can not see/scan other
networks in the area.Its really annoying.When i do factory reset/data on any rom,its all good for some time,sometimes like few hours,sometimes
few days,but it all gets f_____ up again,and i can only use networks i already used in the beggining.I tried few times to flash stock rom via Odin,
it was all good,but after some time (as i said,sometimes less sometimes more time) its acting strange again.Maybe im flashing wrong stock rom
in Odin,i cant really tell whats going on.Current baseband version is n9005xxugpof3,if anyone knows how to solve this,please help,i will provide
any data needed in order to solve this annoying problem.Thank you in advance and God bless you!
p.s.
here is the version of stock rom i flashed,its N9005XXUGBOA5_N9005XEOGBOA4_N9005XXUGBOA1_HOME.tar and i think its Poland version
or something like that.
update:
tried to flash original italian ITV stock rom,all worked fine for a day or so,and it all went back wrong again :/
Phone is not showing any WIFI network,but when i add it manualy,which i tried with my home network,
it works well.Also,its sending me notification when available networks are on,but when i enter wifi
section,list is empty again : / Mac adress in my wifi options is ok,and IP adress is unknown.
Any ideas,guys,i would really appreciate any sort of help?Thanks!