Database Users

pola100 I flash spl 3.13.0000 and I cant anything flash,please I SOLVED IT :-) LOCK

Hi,
I have htc polaris (pola100)
but I unwillingly flash spl version 3.13.000 but now doesn't go anythink flash,
don't go flash anythink other spl version (1.25.0000, 1.28.0000)
Please anybody help me.

You had to flash the original ROM of your Polaris before flashing the Original SPL.
Can you get the tricolor screen?

I have original spl but after I flash hard-spl v2 and flash not original rom,but this rom was very bad.
So I would back my original wm6.1 rom htc, so i find original three original spl (1.25.0000 1.28.0000 3.13.0000) I flash spl 3.13.000 but now doesnt flash anythink anythink spl and anythink rom
please and now?
(ps: sorry my english is bad)

but yes a see my bootloader , i see red blue green and white color
on the left side is write:
POLA100
SPL-3.13.0000
CPLD-2
and the right side is write:
RUUNBH

okay, I understand.
Isn't there any ROM flashed?

i tried rom:
3LIT3_VI_Full
udK_Syrius_R7_WWE
c_shekhar_Pola_WM3.13.755CS_Build20755_Public_Final
and original rom htc wm6.1
But all roms frozen near 0% on htc display

I think you've bricket your phone

but on this list:
http://forum.xda-developers.com/showthread.php?t=351964&page=28
he have same problem as I.
mtelleria mtelleria is offline
Junior Member
Join Date: Jun 2008
Posts: 6
Default Problems installing HardSPL
Hi,
I have installed the last official version on WM6.1 on my htc, now i want to install one custom rom from this forum.
I tryed to istall first HardSPL, but i don't know why, the process get stuck at 0% of the istall and never continue.
In the 3 color screen appear:
POLA100
SPL-3.13.0000
CPLD-2
Someone can help me?
Thanks
____AND THIS ALSO BUT OTHER SPL:
he write:
"donchischotte" donchischotte is offline
Junior Member
On the screen I read:
-------------
RUUNBH
POLA100
SPL-1.28.0000
CPDL-2
--------------
Here is what I do and what happens when I try to use HARD-SPL V2:
1) I connect the USB cable and the writing on the device changes from "serial" to "USB"
2) I run romupdateutility
3) I check "I understand..." + next
4) I check "I completed..." + next
5) on the PC a message "verifying the information on your PDA phone, please wait" appears and after a while the device switches to a screen with a progress bar at 0%, while on the PC the following message appears:
--------------------------------------------------------------
Current information about your PDA phone:
Image version:
Select from below:
UPDATE Update the current ROM version
--------------------------------------------------------------
6) I click UPDATE and the following appears:
------------------------------------------------------------------
Verify that you want to update the ROM version:
From:
Image version:
To:
Image version: OliNex-2.20
------------------------------------------------------------------
7) I press "next" twice and I get the message "updating the ROM image on your PDA phone", but the progress bar is stuck at 0% and after a minute or so i get the ERROR[262] : UPDATE ERROR
I tried usinr both Vista and XP, with or without MicroSD and SIM card. It's always the same.
I tried flashing different SPLs (even the two original ones) with the same problem. If I try to flash a ROM I get the ERROR [294] : INVALID VENDER ID"
after 1% progress.
I HAVE SAME PROBLEM

I think you must wait Olipro or another chef here to say you how to refalsh SPL with 2.40 version in command line

You can try to flash you original ROM via SD-Card.

what is the solution ? I have the same problem with :
SPL-3.13.0000
I can't flash ...

Now its workhttp uff;-)
I flash my polaris 10* and all of a sudden work.

Artemis problems with USPL

Hello guys, I've got a p3300 which I can't update to a WM 6.1. It's the factory's 6.0. It's originally simfree so I dunno if I need to go through the USPL.
The thing is that it gives me 270 Corrupted image error.
As I thought that being simfree originally, didn't need to do CID unlock, I tried to flash a cooked ROM with no success whatsoever.
Any ideas?
Kind regards,
JamworkS.

DONT try to install any rom untill you flash ''uspl cmon''!
you might brick the O2xdaOrbit/p3300!!
* put the two cab files on your device and run them.
* get activesync connection
* run dos window
* soft reset after 100% to get activesync connection.
- only when the rom update utility window opened on pc..
* uspl cmon rom update utility.
***ONLY after doing uspl is it safe to flash a rom.
* if you have an SD card in the device, take it out..
when you have done uspl on your device startup you will see..
SPL: 1.11.cmon
* its done.
USPL 1.11.CMON
http://forum.xda-developers.com/attachment.php?attachmentid=41246&d=1181558635
message me if you get stuck..

Having problems with this.
For 2 days I try all the files and ways to set 1.11.cmon on my P3300 and always stuck at one place no matter what versions of the program I get.
IPL 3.07.0001
SPL 1.11.0000
GSM 02.98.90
OS 3.13.0.0
are the red numbers I see when I restart it.
The problems are that when connect phone and see connected on ActiveSync I start start_uspl program. After 100% connection with Active Sync dissapears and I see black screen on my PPC, then I run ROMUpdateUtility and It says some error that there is no phone connected.
If I start ROMUpdateUtility before start_uspl I go in to boot loader mode ( the 3 colors screen ) and then again that there is no phone connected.
I have done this 15 times or more with different versions of the program and it stucks on the same places ALL the time no matter what version I use.
My artemis had 1.11.cmon before, but I installed the LAST Artemis P3300 ROM from the WIKI. That removed the 1.11.cmon from the phone. After that I have Installed Vanilla 2.0 WWE version on the phone and started the process to set 1.11.cmon on the phone. No success. After some 6.5.5 ROM from the forum, then process to set 1.11.cmon and again nothing...
Please HELP!

i am also having the exact same problem with this , have tried everything to get this to work.

iant2008 mate I did solve the problem
All works as the brains here say. My problem was that I am using Windows 7 at home and Windows Vista at other place I did try to fix this problem. However with Windows XP this whole operation works properly as the people here say. Big thanks to them and I hope you success in this operation too

raving_nanza said:
DONT try to install any rom untill you flash ''uspl cmon''!
you might brick the O2xdaOrbit/p3300!!
* put the two cab files on your device and run them.
- Cert_SPCS
- EnableRapi
* get activesync connection
* run dos window
* soft reset after 100% to get activesync connection.
- only when the rom update utility window opened on pc..
* uspl cmon rom update utility.
***ONLY after doing uspl is it safe to flash a rom.
* if you have an SD card in the device, take it out..
when you have done uspl on your device startup you will see..
SPL: 1.11.cmon
* its done.
USPL 1.11.CMON
http://forum.xda-developers.com/attachment.php?attachmentid=41246&d=1181558635
message me if you get stuck..
Click to expand...
Click to collapse
* soft reset after 100% when the rom update utility window opened on pc..
''to get activesync connection''
it should work dude

Dear Friends,
After USPL the screen of Artemis becomes white and running RUU ends up with error 266. And even after a soft reset running RUU ends until 3% after that comes error 270.
Any solution will be highly appreciated.
Thanks and regards,
Sameeha

...
sameeha said:
Dear Friends,
After USPL the screen of Artemis becomes white and running RUU ends up with error 266. And even after a soft reset running RUU ends until 3% after that comes error 270.
Any solution will be highly appreciated.
Thanks and regards,
Sameeha
Click to expand...
Click to collapse
put the 2cabs on your device and run them..
rapi & cert
run_startuspl - on pc
when this is 100% - soft reset device
-now continue to do rom update utility (uspl ruu)
this should work..?

Hi, raving-nanza,
Thank you very much for your advise. I did that too but nothing happened, error 270 again. errrr? very irritating dude? Any other solution?
Cheers,
Sameeha

...
sameeha said:
Hi, raving-nanza,
Thank you very much for your advise. I did that too but nothing happened, error 270 again. errrr? very irritating dude? Any other solution?
Cheers,
Sameeha
Click to expand...
Click to collapse
i have to admit, i had same trouble to do uspl1.11cmon but eventually it worked.. frustrating.. i know.. but keep trying.. if i was you i would flash back to the official rom.. which should get rid of 1.11.0000 and set back to original spl..
i put rapi and cert on my device, ran them, connected to pc, ran ''run_startuspl'' that made penguin on screen on device.. went to 100% then white screen.. Ruu automaticly opened on pc but i didnt continue with Ruu.. i soft reset device, got activesync connection again and then i continued with the open Ruu..
(Ruu - rom update utility)

Thanks RN, you know, I was trying all this time and my Artemis frozen now (freezes on startup screen IPL 1.25.0001 / SPL 1.27.0000 / GSM 02.69.90 / OS 3.4.0.0. and dopod logo) not moving further. Whats going on? Can you help me?!
Cheers,
Sameeha

...
add me to messenger..
will be much easier than posting

i'm an idiot.....
see this thread
http://forum.xda-developers.com/showthread.php?t=578406
if you run a 3.13 rom; get the 3.13 cmon
if you run a 3.15 rom; get a 3.15.com.
pof's original (kickass great work!!) didn't work with my 3.13 (original htc rom); i ended up with 1.11.000spl. i then ran the 3.13 uspl (see thread); now i am on cmon version

[Q] after orefkov rom upgrade old Gene show black screen

By mistakely Orefkov hspl and run rom update utility of this folder my old Gene show black screen.when press power key call/reject led blink one more time but screen is going black.the gene goes in bootloader tri screen mode.
IPL 1.02.0000
SPL 1.07 orefkov..
before hspl my old gene information is
Rom version 1.2.707.1 WWE
Rom dt. 11/30/06
Radio 02.71.90
Protocol 4.1.13.31
ONBL 1.02.0000
SPL 1.02.0000
GSM 02.74.90
OS 1.2.00
please help
thanks

saurabh_1999 said:
By mistakely Orefkov hspl and run rom update utility of this folder my old Gene show black screen.when press power key call/reject led blink one more time but screen is going black.the gene goes in bootloader tri screen mode.
IPL 1.02.0000
SPL 1.07 orefkov..
before hspl my old gene information is
Rom version 1.2.707.1 WWE
Rom dt. 11/30/06
Radio 02.71.90
Protocol 4.1.13.31
ONBL 1.02.0000
SPL 1.02.0000
GSM 02.74.90
OS 1.2.00
please help
thanks
Click to expand...
Click to collapse
hi
1. if u have done the wrong HSPL for ur phone then i think u need to take it to service or do that jtag(i dont know how to do this )
2. u can try this if u can get into ur try color
connect the USB cable if u get the USB symbol on the phone then try flashing the right ROM for ur phone
ask this question in the gene Question and answers thread in the development section im sure some one will help u
Thanks
hari

[q] stuck in bootloader. Help needed.

have a HTC Athena x7500.
Im stuck in bootloader.
Wend I power on the device it goes directly to bootloader and
the screen say :
ET \ Njq
IPL - v1.00
ET \ Njq
SPL- v1.20. Olipro
USB( wend is connect )
serial ( wend is unconnect )
I dont remember what it was befor I try to flash a WM 6.5 rom on it.
It as a WM 6.1 in Portuguese Rom befor my attent.
I cannot power off the device by pressing the button but have to take
the battery.
I already try to change the rom, the SPl and put everything inside just
to try to move from were I am but no results.
Began to update but ends or in 1% or in 7% and loose the connection.
The device connects to the PC but in PC in WM device center nothing happens.
I try Win7 and also XP.
I went to HTC site to download the official portuguese ROM but there are no
ROM to download.
So I´m dead on the water.
I will apreciate very much any kind of input that take me out
of were I´m now.
I´m not a expert as you already notice.Please keep it simple.
Thank you

stuck in bootloader. Help needed.
stuck in bootloader. Help needed.
have a HTC Athena x7500.
Wend I turn on the device, it goes directly to bootloader and
the screen is:
ATHE 100
IPL - v1.00
ATHE 100
SPL-v3.05.0000 OR my old spl spstuck in bootloader. Help needed.l is 1.10
I have tried to change the language of my athena and then he died :spanish > fransh
USB (wend is to connect)
series (wend is unconnectable).
I can not turn the unit off by pressing the button, but must take
the battery.
I have tried with hardspl its not working
I want a solution in the forum xda-develop it says my q must upgrade to the rom of espana oficial
After downloading the rom:Advantage_HTC_SPA_2.21.412.1_1.50.00.00_Ship
I tried to upgrade to this rom May j has a mesage on my athena screen:
found spl v1.10
dowload Spl before v3.05 is not allowed!
I tried to update it with the sd card i have the same mesage
upgrade with athenaUnlucker not work
upgrade with hardspl v7 not work
upgrade with CheetahUnlocker not work
upgrade with athena wraper not work
J have explored ruu_signeg.nbh with notepad jai entered the signer spl 1.10 I know if c is vrait or name
I believe there is a problem in the image rom saved in my athena rom
what I see on the screen of my athena is the spl 3.05.0000
The real spl is 1.10.0000 there is confusion in my spl
is what I can fix this problem with mtty
so if possible please guide me
sorry for my bad Englis
thank you in advance
My email: [email protected]

found spl v1.10 dowload Spl before v3.05 is not allowed!htc x7500

stuck in bootloader. Help needed.
I have a HTC Athena x7500.
accidentally upgraded my htc x7500 WITH SSPL-Manual-x7510.zip of HTC X7510
Wend I turn on the device, it goes directly to bootloader and
the screen is:
ATHE 100
IPL - v1.00
ATHE 100
SPL-v3.05.0000 OR my old spl is 1.10.0000
I have tried to change the language of my athena and then he died :spanish > fransh
USB (wend is to connect)
series (wend is unconnectable).
I can not turn the unit off by pressing the button, but must take
the battery.
I have tried with hardspl its not working
I want a solution in the forum xda-develop it says my q must upgrade to the rom of espana oficial
After downloading the rom:Advantage_HTC_SPA_2.21.412.1_1.50.00.00_Ship
I tried to upgrade to this rom May j has a mesage on my athena screen:
found spl v1.10
dowload Spl before v3.05 is not allowed!
I tried to update it with the sd card i have the same mesage
upgrade with athenaUnlucker not work
upgrade with hardspl v7 not work
upgrade with CheetahUnlocker not work
upgrade with athena wraper not work
I have explored ruu_signeg.nbh with notepad jai entered the signer spl 1.10 I know if c is sure or not
I believe there is a problem in the image rom saved in my athena rom
what I see on the screen of my athena is the spl 3.05.0000
The real spl is 1.10.0000 there is confusion in my spl
is what I can fix this problem with mtty
so if possible please guide me
I board on my pda (cid locked)on the Spanish language HTC_304
sorry for my bad Englis
thank you in advance
My email: [email protected]

help me plaise
is that the bootloader command Herme (mtty) could walk on Advantage X7500

i had this problem and what i did to remedy it was, take out the battery, take out the sim card and the sdcard. replace the battery and turn on the device.
once it is in the bootloader plug in usb cable and make sure the bootloader shows usb at the bottom.
then try to load any rom that is for spl 3.0. they should load and get it out of the bootloader mode.
Once you have it working again then be sure and flash the proper spl of the rom that you are wanting before you flash the rom.
i tried the wrapper and hardspl as well until i just tried the above example on a whim and it worked. I hope it works for you.
CE

thank you for your answer
I board on my pda (cid locked)on the Spanish language HTC_304
Can you explain how you did
thanks

Was there any solution to this problem, I have the same problem?

is what you got the official rom spain