Database Users

GPRS Connecting at startup!

Have searched for this and find nothing:
Whenever I restart my TyTn, GPRS connects automatically. I have not configured my email to check for mails at specific intervals. Please help me with this. Thanks!

I think your connection is configured as "always on". You can change it in the registry....

danielherrero said:
I think your connection is configured as "always on". You can change it in the registry....
Click to expand...
Click to collapse
Indeed, or if you're not confident about changing registry use something like Tweaks2k2 to make the change for you along with lots of other little tricks.
http://www.tweaks2k2.com/portal/staticpages/index.php?page=20050224182009983
requires .net framework also downloadable on same page
Mike

You could try a less drastic approach:
Check:
Settings, Connection-tab, Connections, Advance-tab.
(hope this is correct, I don't have an english rom-version)
There you should be able to select which connection is automatically used. I have this on T-Mobile default connection since I have an unlimited dataplan and use direct-push.
When using the phone as modem, I have to switch this "off"/different setting eg. work connection to avoid conflicts.
Hope this helps

drbrains said:
You could try a less drastic approach:
Check:
Settings, Connection-tab, Connections, Advance-tab.
(hope this is correct, I don't have an english rom-version)
There you should be able to select which connection is automatically used. I have this on T-Mobile default connection since I have an unlimited dataplan and use direct-push.
When using the phone as modem, I have to switch this "off"/different setting eg. work connection to avoid conflicts.
Hope this helps
Click to expand...
Click to collapse
We like drastic, drastic is sooooo gooood!!
Seriously though the originator does not say he does not want to use GPRS only that he does not want it starting automatically. So the connection type maybe correct only it needs its bottom smacked for running off without daddy. We have ways in the registry to control such dis-respectful behaviour and baby Hermes must be punished or else get sent to bed with no active sync with Mummy.
Mike

Thanks for your help. I am quite comfortable with editing the registry. What specifically in the registry should I edit. Thanks!
EDIT: I already FOUND it! Thanks for the help everyone!!!

How to disable GPRS connection failure notification?

I have asked my phone company to disable my GPRS access already and I have a wireless router to use Wi-Fi. However, I must admit that the constant attempts by Windows Mobile to connect my GPRS which always result in a failure notification is rather annoying.
Is there a method to disable these notifications?

Reg edit
There's a registry edit that will disable the automatic connection, or if you have advanced configuration tool you can do it there. If you don't have advanced configuration tool you can download it here.

I use pre-pay, and as the data charges are high, I only use wifi. I use an app called nodata. It lists your GPRS connections, and allows you to disable them so that they won't be used. I got this app from crc's device update, but I'm sure you could find it easily.

default_user8 said:
There's a registry edit that will disable the automatic connection, or if you have advanced configuration tool you can do it there. If you don't have advanced configuration tool you can download it here.
Click to expand...
Click to collapse
Oh, I recently upgraded my phone's OS to Schap's WM6 Pro, so it came with the OS. I did as you asked (disabled the auto-attached for GPRS), but unfortunately, it didn't seem to work as it continued attempting to connect, and the notification still appeared.
Thank you to you for responding. I appreciate the help!
jez83uk said:
I use pre-pay, and as the data charges are high, I only use wifi. I use an app called nodata. It lists your GPRS connections, and allows you to disable them so that they won't be used. I got this app from crc's device update, but I'm sure you could find it easily.
Click to expand...
Click to collapse
You mean MoDaCo NoData? Oh yes, I installed the app, and used it to toggle the GPRS off, and you're right. It worked perfectly and the message does not appear to be coming up anymore! Thank you so much for you help!

Deactivate data connection on HD2

On my Diamond, I had a handy little application called NoData which deactivated data connections so that I didn't get charged for using mobile internet by mistake.
Is there any way to do the same thing on the HD2?
Thx.

I am also looking for an app that can do this.
I'm off abroad in a couple of weeks and I am already having nightmares about the bill I may have when I return if I can't find a way to deactivate the data!

pkchips said:
On my Diamond, I had a handy little application called NoData which deactivated data connections so that I didn't get charged for using mobile internet by mistake.
Is there any way to do the same thing on the HD2?
Thx.
Click to expand...
Click to collapse
Just use the same app
Grtz,
Degake

there is a app out there called...................nodata

oh, are you sure it works on the HD2?

nodata works fine but i use bsb tweaks to disable data connections manually before crossing the border so i can enable it just in case

Since I have no data plan with my carrier i disable connections not referring to WIFI alltogether, I just go to Settings, connections, menu, connections, advanced, select network, and put "work network" (or something, I have it in italian) to both.

pkchips said:
On my Diamond, I had a handy little application called NoData which deactivated data connections so that I didn't get charged for using mobile internet by mistake.
Is there any way to do the same thing on the HD2?
Thx.
Click to expand...
Click to collapse
there is a vey simple way to deactivate the data connection: long press the on/off key and you will get a little menu: one of the menu items is deactivate data connection. Press it and it's done.

kuzibri said:
there is a vey simple way to deactivate the data connection: long press the on/off key and you will get a little menu: one of the menu items is deactivate data connection. Press it and it's done.
Click to expand...
Click to collapse
That terminates it, but it doesn't stop it coming back on when an app tries to use it.
Is there a reason that no-one has suggested airplane mode?

no cab needed, the answer is on the HTC site:
How do I disable my 3G/GPRS Data Connection?
Follow the steps below to ensure that your phone will never connect to a GPRS/3G Data Connection.
1. Go to Start > Settings > Menu > All Settings > Connections > Connections
2. Tap Add a new modem connection > then under Select a modem, select Celluar Line (GPRS) > Name the Connection "Offline" >Tap Next.
3. In the Access point name text box input "Offline" and tap Next.
4. On the next page tap Finish.
5. On the second Connections Menu, tap Manage existing connections and select "Offline" then click OK.
Re-enable the data connection if you want to connect to the internet via 3g/Edge.
1. From the home screen, slide to the Settings tab, Wireless Controls > Data Connection.
2. Select your Country and Operator
3. Tap OK.
4. On the subsequent screen, tap Yes.
The phone will automatically configure itself with the appropriate settings.
Note: When disabling the connection in this way, your phone may report errors when trying to connect to "Offline." The error is caused by the phone being unable to connect to a data source due to the settings, and is normal.

traianescu said:
no cab needed, the answer is on the HTC site:
How do I disable my 3G/GPRS Data Connection?
Follow the steps below to ensure that your phone will never connect to a GPRS/3G Data Connection.
1. Go to Start > Settings > Menu > All Settings > Connections > Connections
2. Tap Add a new modem connection > then under Select a modem, select Celluar Line (GPRS) > Name the Connection "Offline" >Tap Next.
3. In the Access point name text box input "Offline" and tap Next.
4. On the next page tap Finish.
5. On the second Connections Menu, tap Manage existing connections and select "Offline" then click OK.
Re-enable the data connection if you want to connect to the internet via 3g/Edge.
1. From the home screen, slide to the Settings tab, Wireless Controls > Data Connection.
2. Select your Country and Operator
3. Tap OK.
4. On the subsequent screen, tap Yes.
The phone will automatically configure itself with the appropriate settings.
Note: When disabling the connection in this way, your phone may report errors when trying to connect to "Offline." The error is caused by the phone being unable to connect to a data source due to the settings, and is normal.
Click to expand...
Click to collapse
that's what bsb tweaks does, but with one click.

d3l1 said:
that's what bsb tweaks does, but with one click.
Click to expand...
Click to collapse
in case you dont feel like installing bsb tweaks, get nodata here
http://www.modaco.com/content/pocket-pc-software/246171/new-free-utility-nodata/

This is what i want to know. How can we auto disconnect data connection after certain period of time. For example if i set up my device to update weather every hour using EDGE, it wont disconnect automatically but i want it to auto disconnect once the weather is updated regardless of i notice it or not. How do we achieve that?

Hello, I have installed the modaco no data app and it works a treat.

yusufjee said:
This is what i want to know. How can we auto disconnect data connection after certain period of time. For example if i set up my device to update weather every hour using EDGE, it wont disconnect automatically but i want it to auto disconnect once the weather is updated regardless of i notice it or not. How do we achieve that?
Click to expand...
Click to collapse
Why not give this a try? http://forum.xda-developers.com/showthread.php?t=286844&highlight=bandswitch

Thought i'll post a qn here instead of starting a new thread:
Is there any way to allow data connection for just one application in hd2? disabling all others?
I want just IM+ to have data connection but not others like weather update,stock update etc...
any ideas friends?

An application having the same functionality of the famous MoDaCo Nodata but with Manila touch screen interface!!
http://www.redfrogfish.com/data-controller/

sevoflurane said:
An application having the same functionality of the famous MoDaCo Nodata but with Manila touch screen interface!!
http://www.redfrogfish.com/data-controller/
Click to expand...
Click to collapse
Thx...but its only showing 3 connections:mobile TV,MyWorld and MMS.
IM+ is not there although its running.

disabled data but now cant connect to wifi
Hi,
I've disabled my data connection using the HTC mehtod but now when I've connected to wifi, I keep on getting an error message say page cannot be displayed and there is a problem with my connection?
Can someone please tell me if I've done something wrong? and if this is suppose to happen?
Thanks,

How to stop Facebook to automatically open a 3G connection?

How to stop Facebook app to automatically open a 3G connection even when the WiFi connection is also ON?
Thanks in advance.

Anybody has a tweak or program to disable it or know how to modify the registry?

BetoX said:
Anybody has a tweak or program to disable it or know how to modify the registry?
Click to expand...
Click to collapse
you don't need anything. just read the manual

You could use the application "Data Controller", i have it installed cause this annoyed me aswell.
Data controller allows you to shut down any non-wifi signal your phone is currently transmitting (like the data link & wap etc.)

rigo007 said:
you don't need anything. just read the manual
Click to expand...
Click to collapse
I love people like you, always so helpful ..

BetoX said:
How to stop Facebook app to automatically open a 3G connection even when the WiFi connection is also ON?
Thanks in advance.
Click to expand...
Click to collapse
i use a program called NoData

esnwizz said:
i use a program called NoData
Click to expand...
Click to collapse
Thank you for the hint, but searching for it I found a new 'version' updated to work with Manila Windows Phone, called Manila Dial-up Enabler/Disabler.
Now what I do need, it is to find a way to use facebook through wifi/wlan ..

Has anybody already discovered how to have facebook using only wifi or activesync connections?

I will Copy/Paste the steps since new users cant post links
Prevent your phone from using the data connection when you want to ensure that it will never connect to the Internet via GPRS/3G.
On the Home screen, slide to the Settings tab and then tap Wireless controls.
1-Tap Menu > Connections and then tap Add a new modem connection.
2-Enter Offline as the name of the connection.
3-In the Select a modem list, select Cellular Line (GPRS), and then tap Next.
4-Enter Offline as the access point and then tap Next.
5-Tap Finish.
6-Tap Manage existing connections and then select Offline.
7-Press BACK and then tap Done.
Restoring the data connection:
1-On the Home screen, slide to the Settings tab and then tap Wireless controls.
2-Tap Menu > Connections and then tap Manage existing connections.
3-Tap the name of your mobile operator's data connection.
4-Press BACK and then tap Done.
Hope this will help

Offing GPRS for openeclair 2.1 v5

Hi, I need help. I just installed openclair 2.1, but I keep downloading data from the internet. Is it possible to off GPRS or trigger it? I dun want to spend any money on data transfer.

http://apndroid-android.mobiload.de/apps/APNdroid.apk
It's called APNDroid and it works like a charm on Tattoo Download it 4 free

I have installed it. When I off my Wi-Fi, it will have a G icon with 2 arrows... there is this thing call Background data, should I off it?

Mod. edit: not dev related, moved to general

Suhong said:
I have installed it. When I off my Wi-Fi, it will have a G icon with 2 arrows... there is this thing call Background data, should I off it?
Click to expand...
Click to collapse
Well, background data is required when you want to access market or want to sync your contacts, calendar, and events with google...if you don't need market, you can disable this option...

If you want to, you can create a dummy APN with no server address. Once you connect to it, the mobile internet will stop connecting.

COuld you teach me how to create? I am abit not sure about this.

Go to Settings>Wireless & Network>Mobile Network>Access Point Names>Menu>New APN.
Now type the Name as 'Off' and type the APN as 'dummy' and save it. When you select that APN, your Mobile internet will turn off.
Cheers.