Hi everyone
just bought a G910, i was so enthusiast of my bargain...UNTIL I SWITCHED IT ON... It's like an obese elephant disguised as an handeld [and i have the latest official rom, the .36 one]. It's slow, really heavvy, it crashes continuously, ecc.
I've searched for something that could help me, but i haven't found absolutely nothing about cooked stuff or similar for my G910.
I need an help, if it doesn't exists anything already done, and is it possible to create a cooked rom for the g910, i'm ready to learn.
In addiction, I have some troubles that i'd like to clarify.
1) Does it exists a REALLY WORKING fix for the annoying low volume?
2) Are there some rom for others handeld that could fit and work with succes on my G910?
3) Does it exists some software for overclocking my device?
4) Are there some kind of updates that i can do? I've got WM6 installed, i was asking myself if is it possible, in some way, to install WM 6.5 or similar.
5) Please HEEEEEEEEEEEEEEEEEEEEEELP me
It's a watch, that's a phone.... how can you expect it to do much?
Thanks for your reply but... i've not understood what do you wanna say :/ Sorry but i'm not english ))
Little update.
Found "TSW TOOLS" software, from Cotulla [the forum doesn't allows me to post links but it's so easy to find]
This tool decrypts/encrypts .bin to .tsw and .tsw to .bin.
So now i have a .bin file with my rom.
Tried to "split" it with ImgFstools but it says
"
ImgfsFromDump.exe G910_Software_IT/prg/G910SW.bin out.bin
ImgfsFromDump 2.1rc2
Compression DLL does not support compression type '\AMSS\products\7'!
"
...could someone help me?
Related
Hi All
I see now we are getting quite a few custom ROM's from the likes of bepe, panosha and other.
Great Work Guys.
But i would also like to be able to build or a least edit a ROM to exactly meet my requirement. Like adding or removing certain CAB files and making reg edits.
Have been reading a lot of other threads on the site put none seem to deal directly with the Polaris.
So i was hoping some of you great cooks (grovel grovel grovel) would wight a description on how to take a nbh file and extract and edit the different nb parts and then rebuild back to a nbh file ready for flashing.
Thanks
polaris kitchen
sorry......wrong answer
I'd love that too! I want to mod an existing ROM and make it specific to my needs.
Will anyone be so kind and post a short guide how to do this? And make the topic sticky!
First, you can start with Kaiser's Kitchen...and at last, use Dark Simpson tool (htc room tool) to make nbh file (config add Polaris device in tool config)
Cheers,
ouioui
Good place to start is here http://wiki.xda-developers.com/index.php?pagename=Kaiser ROM Kitchen Tutorial
Yep , good one, but everything is based on Kaiser.
I don't have a Polaris Radio, neither does the HTC Rom Tool allow to cook Polaris Rom's.
Any other ideas ? Or could someone help ?
Thanks a lot in advance
The Kaiser kitchen works fine and all you need to do with the Dark Simpson ROM tool is change the Model ID from KAIS***** to POLA*****
As always read the threads before you start cooking and make sure you have Hard SPL!!
Thanks
I've been reading all night ;-)
In the HTC Rom tool there is no Polar***** , strange, although I thought I downloaded the newest ini. I've read in another thread that I could use the Kaiser one as it was basically the same device, is that so ?
Other question though:
Talking about Hard-SPL- I've Hard-SPL'd mine , but do I need to include that one in the rom as well ? Like while using the HTC Rom Tool , in the SPL section ???
Second question, where can I find the radio.....nb ?
Thanks for your help, I appreciate that.
As I said set the ROM tool to Kaiser then change the Model ID to POLA***** and use as normal to create the nbh image.
As for Hard SPL... once you´ve flashed it that´s that, no need to flash it every time you change ROMs or radio...
id love to see the guide for polaris aswell.
and oem packages as well.
i did everything as it was sowen in kaiser guide, but i got an error on building system. have no idea why..
was saying that something is missing or path is icorrect smth like that
post here exact errr.U got.
here is htcrt.ini for polaris (only Polaris Option is active) simply rewrite htcrt.ini in folder with htcrt.EXE
It's not necessary to include Radio ROM when building? Right?
nope, its up 2 U what 2 include (SPL/Radio/OS/Splash)
phsnake said:
post here exact errr.U got.
here is htcrt.ini for polaris (only Polaris Option is active) simply rewrite htcrt.ini in folder with htcrt.EXE
Click to expand...
Click to collapse
Thanks for the guidance. The tutorial is great but fails to mention specifics if you are not cooking a Kaiser Rom. For example, does the baserom have to come from a shipped Rom? I was using the 3.02 Kaiser Rom as my baserom. Can you do that when cooking a Polaris rom? How do I get the RUU_signed.nbh out of any other Rom. I thought about using the WM6.1 19716 Rom but couldn't extract anything. (Probably stupid questions but cant find answers in the wiki). BTW, I was getting same errors about half-way through compiling process. If I try again today, I will record the errors and post. Again, thx for help.
sgreenwood99M me i have 19716 WM6.1 for cooking. U can Use some part of any ROM but U have to be sure exactly what. In general U can Use OEMpackages freely, but be aware with drivers, baseapps....(i have perfect CZECH 19199 WM6.1 but w/o working SMS)
Hi,
i've read through the Kaiser kitchen guide and it all seems to make sense however i'm not sure how much is relavent to the Polaris, for example the ingredients section talks about expanding the radio file and the rom files to folders, from the Kaiser files on rapidshare etc.
Do us Polaris users do these points too? or are there specific Polaris Radio and ROM files we use?
I have my base ROM file called RUU_signed.nbh and i've also managed to use pdocread to get the RAW files too, but just not sure where to go now?
All i want to do is remove a few cabs and add a few cabs and EXEs to my rom.
can anyone post comments on exactly which parts of the Kaiser kitchen guide need to be changed to use on a Polaris?
thanks.
dont need raw's. simply put *.NBH(polaris) to BaseRom folder. Run begin.cmd(or bat?) Choose option 1.
click......... then start cook.cmd(or bat)
Do we replace the KaiserCustomRUU and the BuildOS files with ones specific to Polaris? Thanks.
yes, take udK CustomRUU & replace kaiser one, u dont need to replace anything else(except htcrt.ini ||KAIS**** replace with POLA***). And of course Polaris' *nbh
Whenever I put a Polaris nbh in the BaseRom folder, the process gives me an error that it cannot find RUU_signed.nbh.
I recently owned a Polaris, and already started modifying it a litte bit.
I flashed the old WM6 with this one.
I'm happy with it, but I added some programs and tweaks (register modify), and I would like to make my own rom with those included, so if I need to do a hard reset I won't have to re-install all the stuff.
I downloaded the Polaris Kitchen, and HyperCore, but I can't make it work, or I don't understand ... I've searched all the day, is there anywhere a tutorial for use of those applications.
And by the way, in the HyperCore readme they speak about a nk.nbf file, that should be my "base" rom, but I can't get this anywhere, I searched a way to extract it from the nbh french rom, but it seems to be impossible.
Can somebody help me please ?
Want the same
ReMix3D said:
I recently owned a Polaris, and already started modifying it a litte bit.
I flashed the old WM6 with this one.
I'm happy with it, but I added some programs and tweaks (register modify), and I would like to make my own rom with those included, so if I need to do a hard reset I won't have to re-install all the stuff.
I downloaded the Polaris Kitchen, and HyperCore, but I can't make it work, or I don't understand ... I've searched all the day, is there anywhere a tutorial for use of those applications.
And by the way, in the HyperCore readme they speak about a nk.nbf file, that should be my "base" rom, but I can't get this anywhere, I searched a way to extract it from the nbh french rom, but it seems to be impossible.
Can somebody help me please ?
Click to expand...
Click to collapse
Hi guys,
I have the same problem. To me it is a wonderfull dream to my Windows Mobile in my native language. WOW, it will be a great thing if some one can help to reach my dream.
Regards,
the Konge
hy all. i have a problem (wish): i want to install a clean rom ( i have it allready) and i want to customize it with the programs that i want to, and then, to save this rom (i supose that i have to dump it and reconstruct it) exactly with my settings/applications/etc. can i do that? if I can, how? thx alll.
When you customize your polaris on the device itself, it doesn't change the ROM on it. So dumping it will not give you a new ROM. You'll have to change the ROM on the desktop, and upload it afterwards. There are a lot of topics about ROM building.
ok. thx. i will go then to that topics. thx.
Yes but the problem is that all those posts are about porting a 6.1 rom from another device to polaris.
Now that we have a 6.1 rom how exactly do we cook it and flash it back?
Here's my problem: I have the PTG 6.1 rom, but I want to replace the CF2 with CF3.5 and replace TTN6 with TTN7, and flash it back.
I already have Kitchen 1.3, extracted the 'RUU_signed.nbh' and a dump of 03_OS.nb.payload.
Now, where do I go from here?. I want a rom that's exactly the same as the official one but with the changes I mentioned above.
I'm a complete noob at this cooking rom issue. I've read lots of threads but I've only gotten more confused about all the XIPs, SYSs, OEMs and stuff, and I think the same happens with other users.
I know that some of the actual cookers were once in the same place I'm now, so can someone point me out the rigth way and if possible post a detailed tutorial on how to extract, cook and flash back a rom on POLARIS, me and lots of users would apreciate it a LOT.
Second That Thought.
What would be nice to see (if possible) the following,
as an example:
1. Download Polaris ROM Kitchen v1.3
2. Extract to c:\Kitchen
3. Copy your ROM image (*.nbh) to X:\
4. Run command
...20. Install Package (M2D.cab) by doing the following ...
21. Recombine the ROM by doing the follow commands ...
22. Flash your ROM to your Polaris
23. Hard Reset and verify that the package you installed is in your ROM
Congrats
A step by step like that, which walks a user though the process of a demo ROM and a demo *.cab for learning would be FANTASTIC!!!
Thanks in advance to whoever can help us out!
Juxtyce
bump.
Any help from the professionals out there?
Look here:
1. .Net2.0 => .net3.5
http://forum.xda-developers.com/showpost.php?p=2685138&postcount=22
2. replace the ttn.cab file in the folder "\kitchen.work\Build\OEM\OEMAPPS" with the TomTom7 cab. If it don't have the same name, rename the new cab or edit the file 'config_AP.txt' in the same folder
hope it will help you I managed it this way.
P.S. I didn't change the XIP as mentioned in the given thread. See following posts
I will dump the wm6.1 rom for you guys, and provide you with a kitchen with some packages you can use.
I will do so for all available languages that is available with official wm6.1
But,that is gonna be quite time consuming, and I hope that you understand that I ask this in return:
Any small donation for the time I use on that will be of help.
I dont say that its required, not at all. I am not doing this for money.
But the number of hours I spend on this is getting pretty high.
I will do this project either you donate or not.
cheers
thank you a lot itje. can you make in romanian also?
dunno if it's the good topic to post but let's try.
I see many fantastic people cooking excellent roms (i wish i could do the same...), and, in those roms, a lot of softwares.
Isn't it possible to just have a rom with the bare minimum?
and seperate cabs to install what you want?
for example, manilla 2d is cool, but many people like spb mobile shell better, so it's wasted memory.
May be i'm just wrong, don't understanding how it all works, so plz explain to me !
ady_uaic said:
thank you a lot itje. can you make in romanian also?
Click to expand...
Click to collapse
if the language is available; yes
taniwha913 said:
Isn't it possible to just have a rom with the bare minimum?
Click to expand...
Click to collapse
There is a large choice of ROM's, some loaded with extra's, some very minimally equiped. There are so many that your favorite must be out there already. Just search for it.
Hello,
yes, basically I am hoping someone could provide some information on how to create or at least modify a cooked a rom Like the Russian rom or the one from pdaclan specifically for the HP iPAQ 614c/612c.
I would like to make modifications to the existing 614c roms and re-build a flashable flash.dio. I've already bricked my iPAQ once and would like to avoid going thru that pain again.
I want to be able to do the following:-
1-
Example, the Chinese rom has a nice feature showing the battery status in percentage, I think thats the Windows\battdrvr.dll that is responsible for this, I'd like to learn how I can extract that file and integrate it with another Rom.
2-
The Chinese rom has some Chinese left overs so If I knew how I can rebuild the flash.dio, I could overwrite those file from the English one and fix the Chinese rom myself.
3- I would like to dictate what software I want to install as part of the rom.
I don't know where to begin, most of the information related to this PDA are either in Chinees or Russian and I am still a newbie.
I am sure if someone posts some tips, I can get started.
please share your knowledge, I am sure a lot of use would find this info useful.
Regards
Anyone who can dump a Dutch Ipaq 614c ROM?
It would be much appreciated
If you're still looking for one, maybe I can be of some help...
charlieMOGUL
Yes, I'm still looking for a Dutch ROM or a dump of a Dutch ROM.
i am also looking for a dutch rom. if i can help with something or need to do anything just let me know, i need this ROM very bad.
sincerley locoo
Maybe this can be usefull
It is a Dutch ROM
*I will post a working image soon.
For anyone who is interested in cooking a Dutch ROM, here are the OEM en SYS files, extracted from the ROM.
http://uploading.com/files/6a1634d9/OEM_%26amp%3B_SYS_Dutch_Ipaq_614c.rar/
Also for creating a Dutch xt9 cab file, these files are usefull. Creating the cab file myself wasn't successfull. This is a package ready to be cooked for Dutch xt9 files.
http://rapidshare.com/files/278550136/Dutch_xt9_for_IPAQ_614C.zip
Darqw said:
Maybe this can be usefull
It is a Dutch ROM
http://rapidshare.com/files/278140280/Dutch_IPAQ_614C_ROM.rar.html
Click to expand...
Click to collapse
First of all i want to thank you very much for this rom, however
i downloaded this, and flashed it on my device, flashing went perfectly but as soon as the windows mobile screen pops up along with that ''trendy'' beep sound, it gets stuck on it.
i left it a couple a minutes, i stays on the screen showing the ''please wait''
spinning logo of WM 6.
i also tried to reflash it, also re downloaded it in case something went wrong downloading.
anyone else facing this problem to?
and 1 other question,
i made a dump of a hp 614 i have, wich is Dutch, now i got the following files :
- diskimage_Ver.nbo
- part2.nb0.payload
- part2.nb0.payload.part1
- part02.raw
when i whas searching forums i found out that i have to change the
diskimage_Ver.nb0 to FLASH.DIO
i tried this and the device got stuck at the ''clean boot'' part.
obviousley i don't know alot and i'm sorry to ask anyone's help.
but what do i have to do with those other files? how do i make those files to a complete working ROM?
any help appreciated,
thanks to all people that helped me comming this far
I see the problem... I didn't have time to test it thoroughly.
Here is the link for a new (and hopefully a good working) ROM image.
http://rapidshare.com/files/278647058/original_dutch_1.00.rar
The problem is that I myself am still trying to learn to cook, so don't expect any miracles... That's why the first one didn't function properly. But normally this ROM schould function, as it is an copy of a Dutch Ipaq 614c.
If anyone is interested in cooking an up-to-date Dutch ROM, all the necessary tools and dumps are (normally) available. I already posted the OEM and SYS folders separately or they can be extracted from this ROM image.
At the moment I am not able to create a good working up-to-date Dutch ROM image, hopefully somebody is able to create one with the help of this ROM image.
Darqw said:
I see the problem... I didn't have time to test it thoroughly.
Here is the link for a new (and hopefully a good working) ROM image.
http://rapidshare.com/files/278647058/original_dutch_1.00.rar
The problem is that I myself am still trying to learn to cook, so don't expect any miracles... That's why the first one didn't function properly. But normally this ROM schould function, as it is an copy of a Dutch Ipaq 614c.
If anyone is interested in cooking an up-to-date Dutch ROM, all the necessary tools and dumps are (normally) available. I already posted the OEM and SYS folders separately or they can be extracted from this ROM image.
At the moment I am not able to create a good working up-to-date Dutch ROM image, hopefully somebody is able to create one with the help of this ROM image.
Click to expand...
Click to collapse
thanks for the updated ROM link, i'll post a review of the ROM ASAP.
this will be tomorrow,
ontzettend bedankt!
could you please explain me what to do with the 4 files, how they needed to be set-up for a working ROM, im also trying to get the hang of cooking a ROM.
ill be glad to hear from you once again.
yours sincerley,
alex