well, i'm not really sure what i did but i seem to have managed to stop autofocus from working. this is a real problem because it means the barcode scanners can't focus.
i haven't been monkeying around in root or anything (obviously) just installing and uninstalling random apps, but i'm at the bottom of the android learning curve and don't really know how to begin trouble shooting this.
any advice on where to begin would be appreciated.
thanks
I actually think I may have a very similar issue (as it ONLY happens when using a bar code scanning app) but I thought it was just me. Is this what is happening to you...
When I am using a bar code scanning app, the camera starts focusing on the image and just as it gets in focus, it goes out of focus again and then repeats this cycle endlessly. Sometimes it is able to get a lock before it focuses again but not always. I thought it might be a low light issue. I tried turning up the light and it wasn't much different though.
I have this problem, too. I can't focus the camera, it makes the sound, but there is no change at all in the focus when I tap to focus. Also, barcode reader / shop savvy is useless, as the focus on the barcode never occurs.
It seems like this happened when I went to 2.2 via one of many ROMs I've tried.
I suppose it could just be a hardware issue?
What rom and radio are you guys using?
Sent from my Incredible using XDA App
Virtuous 2.7 with the default adrynalyne Kernel
Radio is 2.15.00.07.28
in virtuous 2.7 the focus on my camera sux, especially for night pics w/ flash.
radio 2.05.00.06.11
Just sharing my two cents. I'm running virtuous 2.7 with king's kernal #4, rooted with s-off and 2.15 radio, also on 2.2. Just checked camera after reading this thread and not experiencing any probs thus far. Auto focus working, using touchscreen to take photos.
Im a newb, so I didn't do any modifications other than following directions on this site for rooting, adding roms, etc.. Not any help to you guys, sorry.
I tried downgrading back to stock 2.1, then applied the OTA Update.zip to 2.2, still no luck with the camera focus.
I have a new DInc coming to me under a warranty claim with Verizon.
Hold 'er steady...
Same story for me - won't 'lock on' to the image in order to scan the barcode ~ stock camera. Also tried the EVO camera available in the one of the ROM Manager d/l sections - not much different - for me.
Anecdotally, oddly, I let someone else try w/ my handset, and it worked for them.
SO...... either they have a more steady hand, or.....
Related
Got the Droid X on 7/15, everything was great, got the system update, now the camera won't work. Black screen only, even though both the Camera and Camcorder apps behave like they're working (with a black screen). Cannot take pictures at all, can take video, although no image is shown and playback of videos is a completely black screen.
I look in the camera and it looks like the shutter is open, although I'm not 100% certain what a closed shutter would look like. I think I can see the lens.
I did a full System Restore, the problem did not go away.
I've tried the camera app from the marketplace, facebook, etc., all treat the camera in the same way: just a black screen.
Trying to take a picture, the focus noise doesn't even sound.
This was working prior to the update, albeit in a laggy manner. Should I return my Droid X, or is there some other software / use fix I have not tried?
Thank you in advance!
No one else is having this issue?
This is the first i personally have heard of this issue.
I would take it back and see if they can exchange it.
Sent from my DROIDX using XDA App
After the update I would try to go into the camera but it would say that it couldn't open it. A couple hours later it worked no problem. I recommend a factory reset to se if that helps and then try to exchange.
Edit: sort I didn't se that you already tried to reset it. Yeah it is time to take it back.
Sent from my DROIDX using XDA App
I've tried a soft and hard reset and no luck. But a quick search on the Motorola forums brings me to conclude that this could be a major problem that if it doesn't happen to you now, it might just happen later.
https://supportforums.motorola.com/m.../186355#186355
https://supportforums.motorola.com/m.../185092#185092
ANDROID 3G said:
I've tried a soft and hard reset and no luck. But a quick search on the Motorola forums brings me to conclude that this could be a major problem that if it doesn't happen to you now, it might just happen later.
https://supportforums.motorola.com/m.../186355#186355
https://supportforums.motorola.com/m.../185092#185092
Click to expand...
Click to collapse
The links didn't work for be. Would u be kind enough to explain a bit further what the potential problem is regarding the camera? thanks
Links should work now:
https://supportforums.motorola.com/thread/32521?start=0&tstart=0
https://supportforums.motorola.com/thread/32618?tstart=0
https://supportforums.motorola.com/thread/32376?tstart=150
did you take the lens cap off?
Mine works.
Droid X camera problems after update
ANDROID 3G said:
Got the Droid X on 7/15, everything was great, got the system update, now the camera won't work. Black screen only, even though both the Camera and Camcorder apps behave like they're working (with a black screen). Cannot take pictures at all, can take video, although no image is shown and playback of videos is a completely black screen.
I look in the camera and it looks like the shutter is open, although I'm not 100% certain what a closed shutter would look like. I think I can see the lens.
I did a full System Restore, the problem did not go away.
I've tried the camera app from the marketplace, facebook, etc., all treat the camera in the same way: just a black screen.
Trying to take a picture, the focus noise doesn't even sound.
This was working prior to the update, albeit in a laggy manner. Should I return my Droid X, or is there some other software / use fix I have not tried?
Thank you in advance!
Click to expand...
Click to collapse
I have two droid X phones. My Camera quit the first time I tried to use it after the update. My daughters died 2 days after she updated. Verizon fix is to send me a refurbished phone. My fix is to get rid of motorola and verizon as soon as possible. Any help would be appreciated
chuck k said:
I have two droid X phones. My Camera quit the first time I tried to use it after the update. My daughters died 2 days after she updated. Verizon fix is to send me a refurbished phone. My fix is to get rid of motorola and verizon as soon as possible. Any help would be appreciated
Click to expand...
Click to collapse
Mine did same thing... i pulled the battery while phone was on per the tech on the phone and it has worked fine since.
I have noticed this on rooted droid x's. Factory wipe didn't really resolve any of the camera issues. Re-loading with SBF resolved the issue sometimes, while other times, a simple cache wipe resolves the issue.
I dont know if this will work, but its just a suggestion that fixed my camera. My camera/camcorder app wouldn't open, so then I went into the gallery and deleted a corrupted image (It was all strange looking, a black square with lines on it, and also wouldn't open in any programs). Once I removed this image from my SD card the camera worked. Worth a try I guess...
Also try using another app to open the camera, like Vignette, in order to see if it is a hardware issue or a blur camera app issue.
Just as the thread title says, my camera is full of bugs, unable to change iso/exposure properly and hangs when I try to focus or take a picture. Had the same problem when using jf4 and jm2 as well as third party camera apps. Is this a software or hardware problem? And any solutions?
you are the very first person to complain about this.
just about every body else loves the camera, including me
http://forum.xda-developers.com/showthread.php?t=731846
AllGamer said:
you are the very first person to complain about this.
just about every body else loves the camera, including me
http://forum.xda-developers.com/showthread.php?t=731846
Click to expand...
Click to collapse
I had problems testing the panorama shot, but I never complained, mostly because I don't take pictures and I was just testing it. Also, in the camera's defense, I was talking pictures in a room, where perhaps there was an issue due to corners while the shot is intended to be of landscape....any thoughts?
Not exactly complaining but I think that it could be a hardware problem as half of the time I press the camera app, the app starts shows a black screen and says 'camera failed' and force closes...
Qazz~; said:
Not exactly complaining but I think that it could be a hardware problem as half of the time I press the camera app, the app starts shows a black screen and says 'camera failed' and force closes...
Click to expand...
Click to collapse
Is this lag ?
Not much lag, but like I said its real buggy, can't even focus.when I tap on an area the box shifts to wheretapped but it does not focus, the box will now get stuck there and the iso/exposure will not change then usually the camera will stop working
Qazz~ said:
Not exactly complaining but I think that it could be a hardware problem as half of the time I press the camera app, the app starts shows a black screen and says 'camera failed' and force closes...
Click to expand...
Click to collapse
now, that is an actual problem.
did you try rebooting the phone?
if you can't take even a normal picture, you might have an defective camera
Taking a picture is a hit and miss affair, takes pics 2 out of 10 times i try, it should be a camera problem, going to send it in for warranty now. will report back when its fixed
Have you tried a hard reset to see if the problem goes away?
Whenever things start to go wierd, I alway 1)Soft reset 2)If it does not work do a hard reset 3)If still doesn't work, find out if everyone else with the same firmware has the problem 4) Finally, go to the shop for a replacement, it's likely then to be a hardware issue.
If you have 'fring' installed uninstall it and camera will stop failing
Just updated to JM2, I have fring installed, never had such problem even with stock...
Sorry my bad, fring was recently fixed for sgs
Sent from my GT-I9000 using XDA App
Soft reset, hard reset, flashed firmware again. All did not work. Was sent in for repair a few hours ago, they said it would take 2-3 days, had jm2 on it though and where I live the latest firmware is jf4. Hope they don't bother about that. Hoping for the best
Update!
Just got phone back from Samsung after waiting for 4 torturous days, everything seems to be in working order now, the auto focus is still pretty slow though but other than that its great.
So after all it should have just been a hardware problem as the customer service lady told me that they changed the pcb of the camera
Qazz~ said:
Not exactly complaining but I think that it could be a hardware problem as half of the time I press the camera app, the app starts shows a black screen and says 'camera failed' and force closes...
Click to expand...
Click to collapse
I had the same problem get voodoo lag fix if you have any other lag fix un do them before running the voodoo it works rember after you do the lag fix it takes a long time to boot
here is the fix to camera problem!!!!!!!
I had the same problem get voodoo lag fix if you have any other lag fix un do them before running the voodoo it works rember after you do the lag fix it takes a long time to boot
HELP PLEASE.... I bought a new Galaxy S Captivate about 3 weeks ago and i think alrealy had the new Android 2.1 with the GPS Fixed. The Camera was working until a few days ago. Every time I start the Camera app, after just 2 or 3 seconds I am getting the Warning message "Camera Failed". I can only press okay and the Camera app closes. I tried many times and it is always the same.
I tried soft reset, and hard reset which errased all my data, and nothing. Today I decided to upgrade to the new Leaked version of the Froyo 2.2 to see if it would help. Nothing helped. I AM STUCK....
I called Samsung 3rd level support and they said that I should send my phone to them for them to REFLASH my phone. If that would not fix they would replace and send another phone to me.
My problem is that I am out of the USA (I am in Brazil now) for the next 3 months, so I would like to find a way to fi via software now.
Since Samsung said that the best way to fix this Camera problem is the FLASH the phone, and only SAMSUNG has this special flashing software, my question is:
1- DOES ANY ONE KNOWS WHER I COULD DOWNLOAD THIS SAMSUNG FLASHING SOFTWARE ? ANY WHAT WHERE I COULD GET THE ROM ORIGINAL CAPTIVATE 2.1 VERSION?
2- I only know this 2 ways to flash or upgrade my phone,
I897UCJF6-final-OCD-REV0.rar (for Android 2.1)
I897UCJI6-OCD-REV02-Low-designgears.exe (for Android 2.2 leaked version)
But I am not sure that this is the SAMSUNG FLASH version that they are talking about , is it?
Where can I find the real Samsung Flash software ? PLEASE HELP
Solved Thanks to Voodoo
Had practically the same problem, Camera failed yet it worked for Video and even in Panorama mode, I didn't install anything new other than some themes from the Market, I tried factory set, removing the battery ... nothing worked, so I disabled OCLF, uninstalled it, and installed Voodoo lag fix instead, that made the trick !! Don't understand why though , but anyways it's working now
twingerbread 3.3 - video camera
alovell83 said:
I had problems testing the panorama shot, but I never complained, mostly because I don't take pictures and I was just testing it. Also, in the camera's defense, I was talking pictures in a room, where perhaps there was an issue due to corners while the shot is intended to be of landscape....any thoughts?
Click to expand...
Click to collapse
the camera is definitely broken. I'm running kernel 2.6.32.9, twingerbread 3.3 on sgh-i897; and the video option is no-fugu. force-close EVERY time I try to use it.
When i try to camera it says "camera failed".Soft reset, hard reset, flashed firmware again. All did not work
Hey guys, none of my cameras are working. When i hit the camera button the camera app turns on but the screen is white. I've tried searching but everything comes up related to a discolored camera. Ive tried flashing many roms, fixing permissions, tapping on the camera. Any help is appreciated. Thanks.
Do you have an Evo 4g? You said you "hit the camera button" but the Evo doesn't have a hardware camera button.
If it's happening across multiple roms, including stock, it's probably a hardware problem.
Sent from my PC36100 using Tapatalk
oxxomxxo said:
Hey guys, none of my cameras are working. When i hit the camera button the camera app turns on but the screen is white. I've tried searching but everything comes up related to a discolored camera. Ive tried flashing many roms, fixing permissions, tapping on the camera. Any help is appreciated. Thanks.
Click to expand...
Click to collapse
You haven't flashed a Froyo kernel on a Gingerbread ROM, have you? The issue you describe is a well-documented side-effect of doing just that. If not, I would flash back to stock and see if it works. If it does, then you know it's a software issue. If it doesn't, then I would agree with plainjane.
Did you ever get a working answer to this? I'm having the same problem. My camera won't open, it force closes before going anywhere beyond a black screen. The night before, it would at least open. The front facing camera worked but the rear facing camera seemed stuck on solarize (which I had no options to change). Seems like a software problem so I updated to the latest deck rom, updated hboot, pri, nv, wimax - now fully updated and still no fix. Tried installing miui apk and still same.
If I don't get this camera fixed, I'll have to unroot. Not looking forward to doing that but if it's between having root or camera, I'm going to pick the camera.
Hope someone can help before I have to go to such drastic measures.
midian42 said:
Did you ever get a working answer to this? I'm having the same problem. My camera won't open, it force closes before going anywhere beyond a black screen. The night before, it would at least open. The front facing camera worked but the rear facing camera seemed stuck on solarize (which I had no options to change). Seems like a software problem so I updated to the latest deck rom, updated hboot, pri, nv, wimax - now fully updated and still no fix. Tried installing miui apk and still same.
If I don't get this camera fixed, I'll have to unroot. Not looking forward to doing that but if it's between having root or camera, I'm going to pick the camera.
Hope someone can help before I have to go to such drastic measures.
Click to expand...
Click to collapse
Rooting won't break your camera.
I would flash back to a rooted stock ROM, and confirm whether camera works or not on it. If it does, then you know the issue is in fact software related (which it doesn't sound like it is). If it doesn't, then you have a hardware failure.
A corrupt sd cars gave me the same problem. Try re-formatting it.
Sent from my PC36100 using XDA App
I took it to Best Buy and they told me it's a sensor issue. My phone gets replaced so it's all good.
Thanks for all the suggestions. I tried them all before deciding it must be a hardware issue and going to BB.
I know this is a few months late, but I recently had a similar problem. I would click the camera icon and the screen would just go black and then f/c on me. I was running ICS roms, so I flashed to Decks GB rom, Mik 3.1 rom and had the same problem. So I figured it was a hardware problem.
I decided to open up my evo and take a look inside and found the camera housing was not seated completely. Pushed it back down and it has been working for days now
I guess it probably jarred loose when I dropped it or bumped it or something.
Thought I would share, because it was very frustrating for me, so I figured it might be bothering someone else.
Not being able to post on the Development sections cramps on my style a bit, but I have a couple of questions:
* First of all, I am still on Oxygen, do you guys think there's any good reason to switch? I like Oxygen a lot and apart from a couple of issues (see below) I've been very happy with it... Will dzo ever show up again and merge the new drivers into his release?
* Have the camera and GPU driver from the official 2.3 been ported to any other ROM?
* I've been seeing a lot of ICS related ROMS in Development as of late, is there a fully functional ICS ROM yet? What's stopping us, since it seems almost every other device is making some progress with it (i.e: having hardware acceleration enabled, radios working, etc.)?
Problems with Oxygen:
* Light Sensor behaves strangely: for example, with auto brightness enabled, turning on or off the light in my room makes no change in screen brightness. If I put the device close or directly under a lightbulb it will only then begin to change. I can confirm this with some sensor testing apps. Is there any way to calibrate the light sensor?
* Microphone acts strange: I have never seen anyone report this, but when I connect headphones, then try to use for example voice dialing or voice commands it will not work (wait forever) or simply give an error. If I disconnect the headphones after I tried to use voice it will never work again unless I reboot. If I connect headphones, never use voice, and then disconnect them and use voice it will work as it should
* Signal Strength very irregular: I live in a area with difficult reception, but signal strength is insane, sometimes is goes from 0 to full bars like no big deal
* Camera's FPS very jumpy (new drivers will fix this?)
* No access to internal storage: I knew this going in, but still...
* Flash videos sometimes green and overlapping the screen. This happens with both the YouTube app and any video player that can play FLV. It only happens from time to time and I can't reproduce it.
I went straight from stock (TMN Portugal) to Oxygen, never messed around with any other ROM (I tried CM7 for half an hour or so) but these little things start to bother me, plus it breaks my heart to know that the camera and GPU could be much smoother just by using different drivers. It also scares me that Huawei disabled the standard method of installing Recovery and rooting, so I'd prefer not to upgrade to the official ROM right away. So, is it worth to change ROM at this point? Can you help me with any of my problems with Oxygen?
Hi!
I tryed "all" ROMs I found here in XDA, Oxygen for me is not enough, it just lacks of "options" I love the Cyanogen Settings, you can do a lot of customizations there. Im on custom ROMs for 5 months now, never had a problem with the phone itself. Strange rebooting, camera stopped working and drainage of the battery does NOT count in here. I would suggest you try CM for more than a half hour since - in my opinion - it is the best. I hate the original Froyo, because it lacks of customization. So MIUI is not an option for me, it is just to simple. I was thinking I know all about flashing, but yesterday I just bricked my u8800, simply because I did not notice the + on the end of the official 2.3 update and installed update for u8800+.
My suggestion is, to follow guides here on XDA (they are excellent) and try all the ROMs, and see which one suits you best.
I'm also very happy with Oxygen, I'm still on r1 and have no major issues at all, so thank you very much dzo!
But I hope for the future that dzo will continue to update this rom so we can get better drivers for camera and other small fixes. It looks like the official rom will never be an stable option for us...
Mach III
Has anyone noticed that the camera flash sometimes either flashes too early, or too late, and therefore taking pictures in the dark is pointless. I would love to, by default, program the camera apk to keep the flash on, as long as the camera apk is running. I have only noticed the problem once I rooted my device, permanently disabled security flags, flashed eng bootloader, and virtuous affinity. Before all of those mods (that I have done all at once unfortunately), I never noticed the problem.
I noticed on the virtuous teams forums that there was a dicussion on it, but the thread died before the problem was resolved. I looked for torch apps, but I couldn't find one with the function to leave the led on while starting the camera app.
Any of you guys find any solutions for this issue?