Hi All!
While I was flashing wapvirus' WM 6.5 build 23004 Titanium Neo Shadow last summer I did some mistakes and my Prophet got broken. I've flashed a NVID rom and I saved my lovely PPC . But some times I power off and power on (shutting device up not the screen) it locks down in cloudy Qtek screen or depletes its battery When it locks down I perform a hardreset and it opens. But I'm sick of this. Is there a cure for this? Please help this newbie
Edit: I used that NVID rom for a while and flashed Gullum's TNT v4.
No answer means my Prophet is dead?
Hi There
What do you mean by "mistakes" and have you performed a HardSPL especially after flashing the Qtek NVID.
The other thing to do is to use Lokiwiz 2b to unlock the CID (superCID)
This should give you a few starters or if in doubt have a deep read of the Wiki page.
I mean I did something wrong. I don't remember.
And I didn't performed a HardSPL before flasing rom or flashing NVID.
And thanks for your advise but Does CID unlock damage G4? There's an warning like "WARNING DO NOT PERFORM THIS IF YOU HAVE A G4 PROPHET (IPL/SPL 2.xx.0001)
" in Wiki.
Hi There
Okay forget the Lokiwiz for now as I was not aware your device was a G4 and make sure you flash the phone with a HardSPL before you do anything as not doing so has caused a majority of your problems.
Once you've flashed that then flash the phone with the Qtek NVID or another one I found that works just as well is the Orange WWE as this also contains a NVID. Once you have flashed the ROM it is vital that you perform a hard reset as this will solve most minor issues.
See how you get on with that.
So you say I should flash a HardSPL and then flash the Orange rom, right?
That's right make sure you flash the HardSPL before the new ROM.
As a precaution I always flash the HardSPL before installing any ROM, although you don't actually need to.
In fact I can't flash things to my Lovely Prophet 'cause I have to study hard (really hard) for a short time. Thanks for your help Dixiesmu. If I succeed or fail I'll bother you. Be sure of this.
Related
Hey all,
I am sorry posting the repeated question again, but this has a bit of a twist, and to this, i searched and didnt find any answer around.
My friends just bought a HTC P3300 from China. It came with a chinese DOPOD rom.
I had the original Shipped htc rom with me there so i upgraded my 1st friends mobile, with the shipped rom successfully, and then upgraded it to wm6 successfully.
now when i flashed my 2nd friend's device with the HTC Shipped rom, the upgrade process went to 3% and then the device just restarted and got stuck on the Initial dopod boot screen.
It is not moving from there.
So i downladed a couple of other roms, including the DOPOD ship rom,. but when i try to upgrade it, it says " ERROR:200, The Upgrade Software is outdated" kinda message!
now can someone please guide me how can i bring alive my friends rom, what is it i should do to successfully install some rom in it in English.
Please help!
thanks a lot!
Hi all,,
Please someone help me out with this problem...
Which rom should i try, or what is the problem with this?
Thanks a lot.
Did you cid unlock the hone either with USPL or IMEIcheck? If so, you should be able to load an OEM rom back on the phone. Try the HTC WWE WM5 rom or the German WM6...I dont see any reason why an unlocked phone wont accept at least one of those.
hi itschase...
No, i dont know if it was cid unlocked or not.
About USPL or IMEICHECK, nothign was done on it.
As i mentioned, one phone got flashed successfully, but the other failed!
I have tried the HTC WWE WM5 shipped rom, if thats what u are hinting to, but not the German WM6.
I have a crazy idea...
My phone is not bricked, but I was able to try running the USPL ROM Update utility on my phone from bootloader. I have zero idea if this would unbrick your phone, but its worth a shot - cant get much worse (or can it?). Download the USPL file, and run just the rom update utility with your phone in bootloader. After it resets your phone, put it back into bootloader and try reinstalling an OEM rom. I am probably wasting your time, but its worth a shot....
s
aaaaa
llllll
Insane Devil:
you need original rom for your device (with correct model id).
this should flash your device.
in the future, install uspl on your device before upgrading rom.
regards,
Factory Roms should be able to help u out in this...?
itschase said:
I have a crazy idea...
My phone is not bricked, but I was able to try running the USPL ROM Update utility on my phone from bootloader. I have zero idea if this would unbrick your phone, but its worth a shot - cant get much worse (or can it?). Download the USPL file, and run just the rom update utility with your phone in bootloader. After it resets your phone, put it back into bootloader and try reinstalling an OEM rom. I am probably wasting your time, but its worth a shot....
Click to expand...
Click to collapse
Good Idea but ... not correct!
Your device might be CID locked and you were able to run USPL from bootloader, because ... you already have had USPL. Am I right?
Hi guys,
at first i want to thank you for any solution or info you provide in this forum, it helped me in a lot of cases.
I'm looking for a solution for a problem i'm facing, I have two P4350 which the second is from a friend of mine.
This P4350(HERA100 IPL/SPL 4.x the second device) was bought through ebay and had the german windows mobile 6.0 on it. I couldnt flash the WWE edition of windows mobile 6 because of an error saying "Invalid Vendor ID" so i assume it was a CID Locked.
So I did the first thing i found on this forum and after a lot of reading on how to do it, i installed the Hard SPL from Aserg. The problem is when I try to install the extended rom which comes from the distributor here in Greece of HTC Phones.
Apparently they have done something and somehow it recognizes that i have installed wrong SPL and always reboots(it displays an error msg inside the OS enviroment and after 5 sec it reboots) when the WWE OS start after the installation of the programs inside off Extended ROM.
So after some more reading i found that i could have used the USPL method for bypassing the CID Lock. Correct?
Now my problem is that I want to remove the Hard SPL to install the officially shipped edition of SPL + WWE ROM using USPL.
Whichever solution I use to remove the Hard SPL it just wont go away!
I even installed the German edition again with the hope that it will install the stock SPL again. It says that is being flashed but the SPL doesnt even change! While the ROM is being flashed correctly and windows boot without any problem
I have tried Flash Center, Stock Rom(German & WWE) and lots of different removals for Hard SPL but nothing worked!
Is there any workaround/solution for this problem? I have no problem to use any tools or console based ones but I need some information or a tutorial so as to not brick the device.
Thanx in regard for any help and sorry for the long post but I wanted to describe all the steps that I followed to get here.
P.S. If this post is in the wrong thread please tell me so.
hello, i have read and read all the wiki's, but ive not been able to fix my phone.
i use a cingular 8525 (herm100) phone, and cannot install any rom on the phone. I have two versions of the At&t ROM with radio's and tried them both, but they all stop at 11-12 %.
i have tried usind the sd-card method, and it does not pass the "GSM - " portion.
i guess the radio is not working or is corrupt or something..
my phone is now in bootloader and just says
HERM100
IPL-1.04
HERM100
SPL-2.03
please any help will be appreciated. thank you!!!!
wow.. can anyone even say "sorry"
geez.. 35 views, and not even one reply, or consolation message, or anything??
I would update your copy of Windows Mobile Device Center first (especially if you're using Vista). Flash SPL and the radio, then flash any rom to see what happens. I mean really at this point, it's already a brick... try some crazy stuff, you can't hurt it anymore than it already is. I did the same thing to mine a couple of months ago, and after trying these things, I got it working again without a problem.
update to hard spl ver.7.
try to flash
a). stock rom (sometimes this works)
b). radio only rom.
Also make sure you unlock your phone with this : http://forum.xda-developers.com/showthread.php?t=293665
Hope this helps...
ultramag69 said:
update to hard spl ver.7.
try to flash
a). stock rom (sometimes this works)
b). radio only rom.
Also make sure you unlock your phone with this : http://forum.xda-developers.com/showthread.php?t=293665
Hope this helps...
Click to expand...
Click to collapse
Just to make sure I understand, the unlocker you linked is to SIM and CID unlock, correct ?? And then on top of that - you should update to HardSpl also ??
I have an 8525 on its way that I will be looking to upgrade - just want to make sure I am understanding correctly.
roomtek*8525 said:
geez.. 35 views, and not even one reply, or consolation message, or anything??
Click to expand...
Click to collapse
sorry for the late reply
i have been dealing with this for 3 days and finally managed to run official AT&T rom for 4 days wout hard reset.
there is a method dumping an official himalaya rom to hermes. az pof explained in one of his posts all commands except radio commands are different in himalaya so it is safe to use dumping method.
it basically deletes everything in radio rom so you can install official rom.
PS: at first install official rom stucked %12 i said damn but in second try %15 third try success
i am at work now i dont have the link of method but try googling or searching my posts (not too much )
i hope it solves your problem
bartan
thanks guys, i've tried some things
i have tried using Hard SPL v.7 it does not work.
i have tried using official cingular roms too. stops at 11% no success.
i have tried upgraing radio only, stops a 0% and restarts the device.
i have also used mtty, with some text inputs, no success
i have even tried selling the brick on e-bay .... as you can guess no success.!
bill_in_mtl, sorry bout lateness of my reply ( net problems), yes you do unlock sim and cid. Sim unlock means you can use ANY simcard from any carrier and Cid unlock means you can flash ANY hermes rom (both official or cooked). It needs to be unlocked first as the spl is downgraded to 1.40 (I think) and you should REALLY be running with 2.10 olipro (hard SPL ver 7). I wouldnt bother upgrading to Hard SPL ver 9 a this is essentially only ver 7 with some neat features for developers but it does throw up an error message when you finish flashing a rom(no problems t just feels like it).
Hard SPL WON'T stop you from bricking your phone BUT it will make it easier to recover.
roomtek*8525, sorry to hear that but have you tried flashing with a cooked rom? This unfortunately wont fix the phone part but you will have a working PDA...If you've tried MTTY with info 8 and task 2a commands then thats the best to hope for, Sorry bout that..
hi to all...
i have a trinity in my hands that i had to change lcd...
after i change lcd i tested and seems to be working well..
but it wasn't... the first problem i saw that was when i turn on,it freezes at menu after about 1minute...
after some searches, i've flashed with olipro 1.20 (till here is fine), and then upgrade radio..no luck, because when i tried to do that, it won't pass from 0% at any time and any version of radio
after that i tried to upgrade the rom;but one note,every time i made the 3 color "trick", the olipro 1.20 disappear and i have to flash it again (i don't know if it is normal or not).
finaly, when i try to flash the rom, it freezes at 13%, in all times i tried
i don't know what to do more, if anyone have any ideia, i'll apreciate a lot some help..
many thanks in advance for the patience...
best regards
Have you SIM/CID unlocked it?
no,but if i install olipro, does it needed to unlock to flash the phone?
regards
i tried now to unlock...
but it seems that in both unlock methods,the phone should turn on wich is not the case
Try entering bootloader mode and flashing back an original rom, depending on your device. When successful, your device will boot normally and then you will be able to SIM/CID unlock it and follow the guides from here
http://trinityguides.info/index.php?option=com_content&task=view&id=25&Itemid=66
thank you for your reply...
one of the problems is that i don't know wich was the original rom...
now i'm trying the many roms i can..
is there any method to know what was the original rom?
regards
Isn't it branded? O2, Vodaphone, HTC?
Check the shipped roms http://wiki.xda-developers.com/index.php?pagename=Trinity_Upgrades
yes,is an htc...
one of the roms i tried, i could flash to the end (one of cooked one wma 6.1).
but the problem remains, when reaches the wma logo, it freezes
any sugestion?
regards
Try an official HTC rom
http://rapidshare.com/files/2296300...1_1_.23.405.2_103_6275_1.38.00.11_108_GPS.exe
thanks for the rom, but is the second one that freezes at 13% when installing
any more ideas?
regards
The only other thing I can think of, is that you have a bad SPL. Try the splxploit, see if something comes out. After the SPLXPLOIT, flash again Olipro's 1.20 and if everything goes well, try flashing a 6.1 rom.
http://forum.xda-developers.com/showthread.php?t=308691
i did that already :/
my thought is that the problem is in the flash memory..
i'll try to give hot air in the flash to see if solve the problem because i think is not software problem..
thanks for the help of you
That's what we are here for, isn't it? To help each other. It's a shame it didn't work. Hope you get it sorted.
Is it possible to unlock the device (MDA Compact III) if all I get is the bootscreen with IPL, SPL etc numbers? I tried soft and hard reset and all that stuff I could find here, but none of those helps... I would like to try to flash it, but haven't unlocked it yet so I'm afraid I would brick the device.
All that remains is the three-colored loader, which I can enter without problems.
Any help would be apreshiated...
[ntn]
ntn_labs said:
Is it possible to unlock the device (MDA Compact III) if all I get is the bootscreen with IPL, SPL etc numbers? I tried soft and hard reset and all that stuff I could find here, but none of those helps... I would like to try to flash it, but haven't unlocked it yet so I'm afraid I would brick the device.
All that remains is the three-colored loader, which I can enter without problems.
Any help would be apreshiated...
[ntn]
Click to expand...
Click to collapse
Hi!
You have to read CID with MTTY and find the proper ROM to flash it back to life or you need to make a Goldcard with another WM device and put it to your device and flash it with an official ROM.
BR
Scootie
So far I have seen posts only about getting the original ROM and flash my MDA with it. Well, since I haven't been able to get the original ROM for my device, I'm trying to cook my own ROM with the same parameters the original ROM should have. So far no success....
In case anyone has T-Mobile Sk original ROM and could share it... It would make me really happy
How to read CID with MTTY ?
Thanx !
Hmmm yeah, i am also trying to Unlock CID of my T Mobile MDA Compact-III and then i will flash it later with WM6 ROM. Being a total novice in this field, i am going through all the posts to figure out how to unlock CID.
And i also could not find original ROM of ma device. The links in the forum are of some tm-phonedownloads, but his site is offline for a long time i guess.
Any ways if u get any luck then pls post here as well.