Touchscreen Failure - fixed with stock ROM - HD2 General

Hey guys,
So my touchscreen totally died yesterday, wouldn't respond to any touches at all, hardware buttons still worked however.
Assuming this was a hardware fault I was just going through the motions to book the phone in for a repair, first step was to restore a stock ROM from the SD card, i was previously running hspl 2.08 with one of dutty's recent ROM's.
To my surprise the stock rom has fixed the screen so this was obviously some serious rom or spl error (I tried a hard reset yesterday before coming to the conclusion it was hardware related)
I thought I would post my findings in case it helps anyone else, and would be interested to know if anyone has come across this before, do you guys think this must have been an spl issue if a hard reset didn't fix???
lancemate.

thank you
this just happened to me its after 7pm pacific time htc is closed and im going to try it now

it did not work my touchscreen has still failed and if its because i should remove the spl then i havent done it yet and how do i do it if the touschreen is gone

ok i did remove the spl and put back the stock telstra rom still touch screen failure, so tired of working with winmo crashing hardware and software, i went to android twice and came back to winmo because its what i know, i just keep getting let down, before this the latest let down was winmosquare, i dont know how much longer i can hold out for windows phone 7, i just may go evo 4g

Related

Will WM 6.1 fix my locking up issue?

My phone has to be restarted about every other day. Stuff just starts disappearing off the home screen and taking forever to do anything. Would an upgrade to 6.1 help this?
Are you on a stock Rom?
Since an upgrade will install a brand new Radio and Rom... Yes, it should help this. (so might a hard reset) However if your issue is Hardware( doesn't sound like it) or some poorly written app you have installed (could be) then the upgrade wont help unless you replace the hardware, or dont install the bad app.
So.. Yeah go for it.. It should help. If you havent flashed before.. READ the instructions so you can avoid major headaches or a bricked phone.
My Stock Verizon Phone locked up often... (once or twice a day)
Upgraded with DCDs most excellent Rom, Now my phone is solid.

My Camera will not work anymore??

everything was fine, no problems with the phone at all, than I installed Duttys 4.1 rom and ever since the camera doesnt work. I got the camera to work once since then by un-ticking the camera tab from the Touch flow, soft resetting, then ticking the tab again but now thats not even working. I have installed 2 diferent roms since then and it still doesnt work. also the photo album doesnt work from that tab anymore but does in the program list where as the camera doesnt work at all.
Any help would be great
Have the same problem myself and have yet to find an answer
I found a guy that used advanced config to change one of the camera settings but I tried it and it didnt work
When you flashed the ROM, did you put the phone into boot loader manually, or did the installation software do it?
the installation software did it
dB Zac said:
I found a guy that used advanced config to change one of the camera settings but I tried it and it didnt work
Click to expand...
Click to collapse
I tried that myself and it worked for a while (a couple days) then the camera stopped working again. That trick has not worked since that first time. I have changed roms a couple of times and still nothing.
dB Zac said:
the installation software did it
Click to expand...
Click to collapse
Same here. Also I did accidentally install a rom with the wrong spl and had to hard spl after installing the rom. I think I went from 1.14 to 1.56 or something like that. I had a green tint to the screen until I did the hard spl. I have installed many roms since then and have not had a problem. I did not have a camera issue before this but the camera did work for quite a while after the spl issue. Hopefully this makes sense what I am saying.
so you are saying your camera was fixed after you "re- hard SPL'd" your phone?
dB Zac said:
so you are saying your camera was fixed after you "re- hard SPL'd" your phone?
Click to expand...
Click to collapse
No, I have an unlocked telstra phone and I had flashed my rom a couple times without needing to hard SPL my phone and never had a problem with flashing roms or the camera. It was only after I flashed to a rom that needed the phone to be Hard SPL'd and I didn't properly Hard SPL my phone before flashing the rom. I got the wierd "green tint" to my screen and realized that i had incorrectly Hard SPL'd. I quickly realized my mistake and then did it correctly and then the newer rom worked fine. It was a couple weeks later that the camera stopped working. I can't remember if I was on the same rom or not from when I Hard SpL'd my phone.
Sorry if this is hard to follow.
My thought is, did my upgrade without properly Hard SPL'ing my phone damage the camera or is it something else. Again, I have since properly Hard SPL'd my phone and flashed many roms since without a problem except the non-working camera.
well I don't know but I hard SPL'd my phone the day I got it with the 1.56 HSPL and I have used may roms on this phone. The rom I installed when this happended was duttys WM6.1 rom
dB Zac said:
so you are saying your camera was fixed after you "re- hard SPL'd" your phone?
Click to expand...
Click to collapse
I was trying to revert to an older Hard SPL 1.14 and install an older rom to see if that did the trick. Anyway, in my haste I screwed up and installed the older Hard SPL 1.14 and forgot to add in the older Rom so I ended up with the green screen of death. I couldn't get it to connect via activesync and put it in bootloader mode and re-Hard SPL'd it to 1.56 and the green screen was gone. I was about to go back to the Hard SPL 1.14 with one of Duty's older pre 1.56 Roms but thought I would check on the camera again one last time.
Now the camera works. Again, this is not the first time I have gotten the camera to work and I have no idea how long it is going to last but it is working and I am not going to mess with it anymore right now. I will leave the Hard SPL 1.56 and Miri's WM6.5 Rom that I have on the phone alone and see how it goes.
I know this is not a complete answer and I don't know if just re-Hard SPL'ng will work but it is worth a shot. Again, I downgraded first 1.14, screwed up the phone the went back to 1.56 and the camera started working again. At least I know that it is probably not a hardware issue as I have no where to send it back to for repair. All is well in Wisconsin for the time being.
Well two things:
1st can you just tell me exactly what you did, step by step. If I understand you correctly, I have already tried this but there may be a step or 2 that I missed. please include the roms you went from and two also
2nd, just called HTC and they said my the #'s my phone still has some warranty left and they will honor it in the states (I will reflash to tesla rom and the stock SPL before I send it)
Thank you for keeping me up to date on what you have done to get yours working. If your camera fails again, just call the # on the US HTC customer service site.
x5-rwk said:
I was trying to revert to an older Hard SPL 1.14 and install an older rom to see if that did the trick. Anyway, in my haste I screwed up and installed the older Hard SPL 1.14 and forgot to add in the older Rom so I ended up with the green screen of death. I couldn't get it to connect via activesync and put it in bootloader mode and re-Hard SPL'd it to 1.56 and the green screen was gone. I was about to go back to the Hard SPL 1.14 with one of Duty's older pre 1.56 Roms but thought I would check on the camera again one last time.
Now the camera works. Again, this is not the first time I have gotten the camera to work and I have no idea how long it is going to last but it is working and I am not going to mess with it anymore right now. I will leave the Hard SPL 1.56 and Miri's WM6.5 Rom that I have on the phone alone and see how it goes.
I know this is not a complete answer and I don't know if just re-Hard SPL'ng will work but it is worth a shot. Again, I downgraded first 1.14, screwed up the phone the went back to 1.56 and the camera started working again. At least I know that it is probably not a hardware issue as I have no where to send it back to for repair. All is well in Wisconsin for the time being.
Click to expand...
Click to collapse
hello there ,
1.14 radio is the problem ,
try to flash new one which is 1.16 in same form
http://forum.xda-developers.com/showthread.php?t=529031
or try to get into 6.1 and then Hard Rest with out Upgrade to dutty ,
seems problem in driver...
best regards
I havent had 1.14 on my phone since the day after I got it...
I am not very good at step by step instructions but you have obviously done a lot of flashing already, I will keep it short. Again, this started out as a botched attempt to downgrade my Rom to an older WM 6.1 Rom using the old 1.14 Hard SPL. You might not want to do this as it will temporarily screw up your phone. If you do, here are the steps I took. Really not too involved. Please read all steps first.
1. I synced my phone and downloaded the older 1.14 Hard SPL and flashed it.
link
2. That screwed up my phone "Aweful Greenscreen effect" and was not able use activesync anymore for flashing. I then put the phone into bootloader mode by powering off the phone. Hold in top power button until it asks if you want to power down. Yes. Then when you power up hold the volume down key and the power button at the same time. Make sure your USB cable it still plugged in. Your phone should now be in bootloader mode.
3. I downloaded the most current Hard SPL 1.56 and ran the HSPL Wrapper Blackstone 156OliNex
4. After that the Green Screen problem was gone and when I checked my camera it worked. I took a couple of photos and no problem. I opened it first with the WM Camera Program button then with the Manilla tab. When I used the Manilla tab it had to map the camera/videocamera button as we as find the photo album. After that it has showed up in Manilla normally every time I go back to it. Again, we will see how long this takes.
Thanks for the info on possibly being able to return the device for warranty reasons to HTC.
Hopefully this helps and my links work.
if you don't mind me asking, what dutty rom did you install because this all started for me when I insalled duttys 4.1 WM6.1 rom
Update
When I said I took the phone all the way back to stock, it wasnt 100% true. I loaded a stock HTC rom not a telstra rom.
with that being said, today I got the RMA # from HTC to have the phone repaired so I downloaded the newest updated Telstra Rom and loaded it onto the phone.By the way, My phone did not have the newest Telstra rom on it ever! When the phone was done, I started to prepair to load the newest stock SPL to go along with the rom when I notice the camera works..... What the hell?!?! I try loading a custom rom on it (miris 6.5 rom), camera still works! Hard reset the phone, camera still works. I don't know what this means but my phone is back on line with all features!
Thanks for everyones help and input
Keep your eye on it. It is almost like it slowly looses the connection to the camera and then has a hard time remaking the connection once it is lost. Then you have to do something drastic to get it back. I wouldn't mind so much if it only happened every three or four months but so far I have not been able to keep the camera going past two weeks without loosing it again. Keep me posted if yours goes out again.
Well that didn't take long. Camera is dead again. Going back to WM 6.1 and SPL 1.14 to see if that makes a difference. "unable to initialize" then camera and album disappears from TF3D.
What I ended up doing ( and I did it more then once cuz I tried to load a wm6.5 rom on it) was as fallows
starting with many different wm 6.5 roms, radio: 1.13.25.24 and HSPL 1.56
step 1: I flashed the newest telstra rom (Telstra_WWE_1.59.841.6_Radio_52.64.25.34_1.14.25.24)+
step 2: hard reset
step 3: flashed this custom 6.1 rom (gave up on trying to find a 6.5 rom that worked), L26 ultimate V3.55
step 4: hard reset
step 5: synced to my PC
step 6: loaded all my cabs (soft resetting after every 2 or 3)
Now Miris 6.5 V26 came close to working but when I would sync via PC or Microsoft My Phone it the camera bug would come back.
I am at about 18 hours without the bug. I have soft reset, changed the battery, synced the phone to my PC, called, received calls and text so far...

HTC Sense problems

Hi, I've been having some issues with HTC Sense on the Leo i bought a couple of weeks ago, Although this was fine at first this is now crashing every-time i try and use the quick link tabs. Occasionally this fails to restart altogether and displays; cannot re-start HTC Sense, click here to continue. The only way to re-start Sense at this point is a soft reset. The handset is suffering from regular freezing issues and black screen problems.
I was using the Axlor 6.1 ROM with the radio Radio 2.07.50.27_2. I tried a hard re-set but the problem persisted. I've flashing the Artemis 4.0 ROM and flashing to a different radio 2.08.50.08 however the problem persists with the new ROMS and radio I've tried. I've flashed back to Axlor at the moment. I've done some searches without any definitive answer. Anyone any ideas why this might be happening?
If you have flashed several different roms and are getting instability go have a read of the mtty thread
Will have a look at the MTTY, thanks for the advice.
Edit, handset has completely packed in, it boots to the home screen and then freezes. A bit worrying.
Sherbet66 said:
Will have a look at the MTTY, thanks for the advice.
Edit, handset has completely packed in, it boots to the home screen and then freezes. A bit worrying.
Click to expand...
Click to collapse
I am not liking these reports, this was my problem:
http://forum.xda-developers.com/showthread.php?t=634347
I get a new one tomorrow, i'm nervous about it being another dudd

Problem with touchscreen on my HD2

Hello all o/
I recently installed EnergyROM on HD2 in order to get some enhancements in interface, and everything works perfect, except that sometimes my HD2 blocks any kind of input, and it happens totally randomly. Left 3/4 of my touchscreen wont respond, so basically only part of screen that reponds to touch is right 1/4. I beleive this is not software problem, as it blocks exactly when I use dialer to call someone (+ blocks that happen randomlly). Phone usually unblocks by itself after 5-10 mins or after soft reset.
I have tried installing different version of NRG ROMs, tried even flashing back to original HTC rom, still same problem. So I though "it may be radio rom thats causing this?", so tried installing different versions of radio ROM aswell, but it didnt helped.
I have HSPL 2.08 and I am flashing in this order:
1. Flash with Task29
2. Flash ROM
3. Hard reset
4. Boot
Did anyone experienced similar problems, and if so, is there solution for this ?
Thanks in advance!

[Q] hd2 hangs when gets warm - might it be caused by rom update and how to fix it?

Hello All,
I have an HTC HD2 (TMOUS) that hangs once it gets warm. I got it a couple of days ago. The first thing I tried to do was to update the rom (there was an old stock rom) to the latest version from t-mobile. But when I tried to do that the update process failed at 8% with "error[262] update error". I tried to flash it again, but got the same result.
I tried both the approaches: to flash via usb and via SD card, but the results were the same. Flashing via SD card gave me "RSA fail" error. I have found some related info, but that is not the case since I could flash the radio later. Also I've noticed that after a couple of iterations the phone were vibrating 7 times during the rom update process. Some guys are telling that it could be a motherboard issue (http://forum.xda-developers.com/showthread.php?t=797179 and http://forum.xda-developers.com/showthread.php?t=826119).
Today I tried to update rom again and got it successfull. But the phone has hanged on botting. Taking into account that the phone has been turned off for the whole night I decided to try to put it into a cool place. I put it to the balcony for 5 minutes and the turned it on again. It has loaded successfully and I was able to test wifi and to make a couple of calls. But after some time when it has got warm it hanged.
I have found that some guys had the same problem but couldn't fix it (http://forum.xda-developers.com/showthread.php?t=701349).
It seems to me now that this is a hardware issue (maybe with the internal flash memory module).
Was anybody able to fix the isssue?
Could this problem be caused by my attempts to flash?
Thanks in advance.
Guys,
I'm kindly asking to share your thoughs on any of the questions. It is very important for me since I don't know whether it is my fault or the phone was already damaged.
The rom I tried to flash was a stock rom and the flashing process hasn't been interrupted.
Thank you!
had this issue and indeed it was the motherboard so i had to send it back to htc.
good luck.
az_registration said:
Hello All,
I have an HTC HD2 (TMOUS) that hangs once it gets warm. I got it a couple of days ago. The first thing I tried to do was to update the rom (there was an old stock rom) to the latest version from t-mobile. But when I tried to do that the update process failed at 8% with "error[262] update error". I tried to flash it again, but got the same result.
I tried both the approaches: to flash via usb and via SD card, but the results were the same. Flashing via SD card gave me "RSA fail" error. I have found some related info, but that is not the case since I could flash the radio later. Also I've noticed that after a couple of iterations the phone were vibrating 7 times during the rom update process. Some guys are telling that it could be a motherboard issue (http://forum.xda-developers.com/showthread.php?t=797179 and http://forum.xda-developers.com/showthread.php?t=826119).
Today I tried to update rom again and got it successfull. But the phone has hanged on botting. Taking into account that the phone has been turned off for the whole night I decided to try to put it into a cool place. I put it to the balcony for 5 minutes and the turned it on again. It has loaded successfully and I was able to test wifi and to make a couple of calls. But after some time when it has got warm it hanged.
I have found that some guys had the same problem but couldn't fix it (http://forum.xda-developers.com/showthread.php?t=701349).
It seems to me now that this is a hardware issue (maybe with the internal flash memory module).
Was anybody able to fix the isssue?
Could this problem be caused by my attempts to flash?
Thanks in advance.
Click to expand...
Click to collapse
Before you go trying to replace the mother board or any hardware such as that. I suggest you run a task 29 on your HD2 and reflash the stock ROM. A task 29 totally wipes the current ROM on the HD2 so if it is a problem from you trying so many timez to flash the ROM this will clear that up. Here is a link to the task 29 thread so you can learn more and decide if you want to do it or not.
Thank you for your replies!
T-Macgnolia said:
Before you go trying to replace the mother board or any hardware such as that. I suggest you run a task 29 on your HD2 and reflash the stock ROM. A task 29 totally wipes the current ROM on the HD2 so if it is a problem from you trying so many timez to flash the ROM this will clear that up. Here is a link to the task 29 thread so you can learn more and decide if you want to do it or not.
Click to expand...
Click to collapse
Yes, that's a useful tool, but I'm afraid that I might damage the existing rom and will not be able to flash it agian. Also it requires to flash HSPL before which also potentially might brick the device ( I mean the flashing process).
sike222 said:
had this issue and indeed it was the motherboard so i had to send it back to htc.
good luck.
Click to expand...
Click to collapse
So it was a factory defect, wasn't it?
If I did something wrong during the stock rom flashing process, could be the reason of the problem?
Thank you.
After reading forums it seems to me that the issue appears mostly for T-Mobile US version..
If it is a hardware problem, does anybody know what part of hardware is damaged?
Thanks!

Categories

Resources