Will it work on ATT 3g? - Omnia II General

I was reading the specs of the omnia i8000 and it says it has:
900,1900,2100mhz hsdpa
att works on 1900mhz so will this phone work for me?
I really like the specs.
Can any people give their overal opinion?

i would get this one http://negrielectronics.com/samsung-i8000-omnia-hsdpa-unlocked-p-3121.html has the 850 band also...im lovin mine

Wow.
exactly what i need but it seems a little expensive.
Any others?

I have this model Omnia..was great until...
FIREONHIGH said:
i would get this one ... has the 850 band also...im lovin mine
Click to expand...
Click to collapse
This is the model Omnia i have been using for the past 6 months.
When i put my AT&T SIM in it from my Tilt everything was detected and worked great.
I did a hard reset a couple days ago...now it detects AT&T but i get weak to no signal anywhere i go.
Cant figure out what setting is missing as it appears everything is set correctly through the auto-detect.
Was great up to this hassle.

invictuz said:
This is the model Omnia i have been using for the past 6 months.
When i put my AT&T SIM in it from my Tilt everything was detected and worked great.
I did a hard reset a couple days ago...now it detects AT&T but i get weak to no signal anywhere i go.
Cant figure out what setting is missing as it appears everything is set correctly through the auto-detect.
Was great up to this hassle.
Click to expand...
Click to collapse
check this thread http://www.samsung-omnia.org/how-to-b57/new-phone-setup-for-mms!!!-(sim-doesnt-do-everything)/

The bell version will work on at&t 3G and it's cheap, but only problem is unlocking it...

mobile-to-go in vancouver will unlock it and very inexpensively... he did mine...

Related

Is it possible to get the Leo working on AT&T in the US?

Is there a custom ROM in development to accomplish this? The Leo looks to be phenominal - just no due dates in the US.
TIA
I bought at expansys-usa.com.
Unlocked.
Regards.
Right on. Ty for the reply. So I should just be able to load up a custom Leo ROM, stuff in my simcard, and use all the AT&T contract features I currently use on my AT&T Tilt 2?
TY again!
Well, just keep in mind, the model being sold at expansys-usa is the Euro model, meaning no 3G service in the US. However, you can still place calls over GSM network (both ATT and T-Mobile) and use EDGE data connection.
Cheers,
S.
instead of rushing on getting one like i did you can wait till tmobile releases their's sometime around march(rumor) and get it unlock for att. This phone would be a lot better with 3g.
Thanks for all the info ya'll!
T-Mo and AT&T do not use same bands !!!
Please note that while AT&T uses 850Mhz band T-Mo uses the 1700Mhz. What will happen, if the T-Mo version will be 1700/2100 as I suspect, is that if it will be unlocked, even if it will show on screen it is on a 3G network, it will be for uploading only, and will not download a thing.
If the advise is to wait, I would wait until Telstra in Australia will start selling HD2, and import it from there, as their 'NextG' network is 850Mhz.
I know cause I just did the same with my HD. Got an aussie unit, and unlocked it. (internet buy)
As for myself, based on my 6 months experiance with the HD, I will get tomorrow my EU version. Yes, will not have 3G, but quite frankly, the 3G is almost useless for me because at leat on the HD it drained my 1350mAh battery pretty quick, being on 3G. I had to install WMlonglife and has been on a 2G network most of the time. Another thing - It is pretty easy to be on Wi Fi at home, at office, at starbucks, etc.. lots of free access points. For emails/SMS the 2G is good enough regardless.. So - I went with the EU version. BTW- I know expansys sells it for $784, but check www.networkingrus.com (hope I do not violate a forum rule, if I do, I appologise) but they sell for far less, and I have purchased 3 phones from them already, got great service and when I was over seas and my phone broke, I purchased one from them , and they shipped it to me there, it got stuck in customs, they got it back, and re-shipped to my other location while I was travelling. Very honest, and price is good.
Would i wait 3 moths? I would say yes if it was rock solid date, and guaranteed to work on the AT&T band. I decided not to wait any more, when SSPL already works (I am a 28014 addict)
Hope i helped here..
BigE
BigE said:
Please note that while AT&T uses 850Mhz band T-Mo uses the 1700Mhz. What will happen, if the T-Mo version will be 1700/2100 as I suspect, is that if it will be unlocked, even if it will show on screen it is on a 3G network, it will be for uploading only, and will not download a thing.
If the advise is to wait, I would wait until Telstra in Australia will start selling HD2, and import it from there, as their 'NextG' network is 850Mhz.
I know cause I just did the same with my HD. Got an aussie unit, and unlocked it. (internet buy)
As for myself, based on my 6 months experiance with the HD, I will get tomorrow my EU version. Yes, will not have 3G, but quite frankly, the 3G is almost useless for me because at leat on the HD it drained my 1350mAh battery pretty quick, being on 3G. I had to install WMlonglife and has been on a 2G network most of the time. Another thing - It is pretty easy to be on Wi Fi at home, at office, at starbucks, etc.. lots of free access points. For emails/SMS the 2G is good enough regardless.. So - I went with the EU version. BTW- I know expansys sells it for $784, but check www.networkingrus.com (hope I do not violate a forum rule, if I do, I appologise) but they sell for far less, and I have purchased 3 phones from them already, got great service and when I was over seas and my phone broke, I purchased one from them , and they shipped it to me there, it got stuck in customs, they got it back, and re-shipped to my other location while I was travelling. Very honest, and price is good.
Would i wait 3 moths? I would say yes if it was rock solid date, and guaranteed to work on the AT&T band. I decided not to wait any more, when SSPL already works (I am a 28014 addict)
Hope i helped here..
BigE
Click to expand...
Click to collapse
I agree....mine is an unlocked euro version too, and I am using mine on AT&T with no problems! It is even pretty fast on the Edge data network..... in addition, I use mine with my Verizon mifi modem for wifi, and it is blazing fast.....I am falling madly in love with my HD2 now that there are some custom roms available.....LOL
Later.....
BTW, I too got mine there.......they are great people to deal with!
hdbueller said:
I agree....mine is an unlocked euro version too, and I am using mine on AT&T with no problems! It is even pretty fast on the Edge data network..... in addition, I use mine with my Verizon mifi modem for wifi, and it is blazing fast.....I am falling madly in love with my HD2 now that there are some custom roms available.....LOL
Later.....
BTW, I too got mine there.......they are great people to deal with!
Click to expand...
Click to collapse
Dang! I did not know of that place. I bought mine on ebay. It came with everything and a 8GB memory card instead of 2GB. Bought it for $764 + 8% cashback.
Also using mine on AT&T no prob
I bought a Euro model as well, using it in the US on T-Mo and not regretting a thing: IN fact, I had a HD the year before. No 3G, don't care.
On top of that, I got my wife a TP2 through T-Mo. She used it 10 days, finding the 3G to be disappointing. I didn't do a head to head between the T-Mo 3G and my EDGE, that would just be silly.
My concern about a T-Mo version of Leo, assuming the rumors are correct, is what happens to the T-Mo specific functions, and can it be flashed by one of the magnificent custom ROM's available here on XDA? The only T-Mo specific feature I can come up with is 5 fav.....but I'm not sure that's even offered anymore.
The question is.....just for laughs.....can a T-Mo branded Leo be flashed with a custom ROM?
Agreed with pretty much everyone who went and got their HD2 and using it on ATT or TMobile. I bought mine a week after ATT released the Tilt2. I sold my Tilt2 few days after I got the HD2. I never looked back and the device is sexy as hell. Enjoying it even more now because with custom ROMs the internal storage is sweet (as good as the TP2/Tilt2).
I purchased my Leo in Hong Kong knowing full well that it would not work on the 3G with AT&T. That was not my main concern. It works very well. Love it especially with some of the mods to have 20 shortcuts instead of 9.
Glenn
unlocked phone is custom ROM ready..
audscott said:
I bought a Euro model as well, using it in the US on T-Mo and not regretting a thing: IN fact, I had a HD the year before. No 3G, don't care.
On top of that, I got my wife a TP2 through T-Mo. She used it 10 days, finding the 3G to be disappointing. I didn't do a head to head between the T-Mo 3G and my EDGE, that would just be silly.
My concern about a T-Mo version of Leo, assuming the rumors are correct, is what happens to the T-Mo specific functions, and can it be flashed by one of the magnificent custom ROM's available here on XDA? The only T-Mo specific feature I can come up with is 5 fav.....but I'm not sure that's even offered anymore.
The question is.....just for laughs.....can a T-Mo branded Leo be flashed with a custom ROM?
Click to expand...
Click to collapse
Don't worry, if you get a T-MO leo when it is offered, you can always unlock it and put a cooked ROM on it, BUT, don't ever try to get serviced after, because they will deny any warranty repairs. Even for obvious malfunation you will be blamed it was a result of flashing..
I never buy the hardware from the service provider. as an AT&T customer i was dumb enough to get an iphone to my daughter, paid $199 for it, and got locked for two years with a monstrous 2 year contact of $43/month (text,broadband, $10 family line). Guess what - phone was broken (screen shattered) after 3 months. they say warranty does not cover screen. $200 repair, 2 years clock started again, phone got nroken again (this POS breaks when you give it a look !) so now I am locked with $43/month plan, and no iphone. yes, AT&T will not let you go even when they know you do not have an iphone any more. My daughter runs a LG vue and pays the $43 until 2011 !!! that has taught me the lesson... I get my phone for real hard cash and never lock myself with contracts... PS: $43 x 24 +199 = $1,231. Boy was i dumb, or what? My new HD2 was $717 +shipping...
bigE

US T-Mobile HD2 on AT&T? Yes or no?

I'm pretty sure the answer to this is implied or even obvious to some of you out there from the technical specs scattered around this website (and others) on the different flavors of HD2, but I'm unable to reach a conclusive conclusion on my own, so I'll simply plead ignorance and ask it outright:
If I buy a US T-Mobile and attempt to use it on the AT&T network with my 3G AT&T SIM card, which of the following will happen, to the best of your knowledge?:
It won't work at all.
It will work, but only for EDGE access.
It will work as a 3G phone just fine.
It will work on At&t, but GSM only, meaning only voice and edge. You will not be able to get 3G, no matter what rom or radio you flash.
Yep, the above is correct. It will work on Edge only. However, do note that the phone would have to be unlocked first. If you just switch the SIM cards it will not work
currently, it won't work at all.
No one has reported to unlock this beast successfully.
Thanks for the feedback. I'll stay away from this experiment then.
ive got mines unlock and im loving it despite the t-mo brand at the top other then that im loving it.im only egde but it really doesnt matter.
buy the telstra hd2, it will work on att 3G
eastside770 said:
ive got mines unlock and im loving it despite the t-mo brand at the top other then that im loving it.im only egde but it really doesnt matter.
Click to expand...
Click to collapse
How/where did you do that?
nemets said:
How/where did you do that?
Click to expand...
Click to collapse
I successfully unlocked my T-Mobile HD2 yesterday (to switch back to AT&T) after visiting the following site: htccode.com
It'll cost about 25 Euros to get unlocked... Also, the support person is pretty responsive.
bearlo said:
I successfully unlocked my T-Mobile HD2 yesterday (to switch back to AT&T) after visiting the following site: htccode.com
It'll cost about 25 Euros to get unlocked... Also, the support person is pretty responsive.
Click to expand...
Click to collapse
In looking at the band frequencies for the HD2, it appears that you may be able to set it up for AT&T's flavor of 3G. Is this correct?
dipaolnv said:
In looking at the band frequencies for the HD2, it appears that you may be able to set it up for AT&T's flavor of 3G. Is this correct?
Click to expand...
Click to collapse
no, you are confusing gsm bands and umts bands. tmo us won't do 3g on at&t
samsamuel said:
no, you are confusing gsm bands and umts bands. tmo us won't do 3g on at&t
Click to expand...
Click to collapse
Yeah, the GSM(1900+850) in the band frequencies threw me off. I thought that was what AT&T used for 3G. Doesn't matter to me, I'm on T-Mobile anyway... and I keep my 3G off most of the time for battery conservation, lol.

Tmobile 3G on International Edition (GT-P1000)

I am testing the International Edition of the Samsing Tab (GT-P1000, with the phone functionality built in out-of-the-box and the white backplate). Here in the US, when I insert an AT&T SIM card I get 3G speeds (peaked at 6 MB downstream recently), but when I insert a Tmobile SIM card I seem to only get EDGE speeds (not 3G, around 0.1 MB downstream). The Tmobile SIM card works at 3G speeds on another phone, so I know it's not he SIM card. I can get voice calls on both Tmobile and AT&T with no problem.
Does the International Edition (GT-P1000) have the US 3G Tmobile bands?
Any input is welcome, thanks.
mail_e60 said:
I am testing the International Edition of the Samsing Tab (GT-P1000, with the phone functionality built in out-of-the-box and the white backplate). Here in the US, when I insert an AT&T SIM card I get 3G speeds (peaked at 6 MB downstream recently), but when I insert a Tmobile SIM card I seem to only get EDGE speeds (not 3G, around 0.1 MB downstream). The Tmobile SIM card works at 3G speeds on another phone, so I know it's not he SIM card. I can get voice calls on both Tmobile and AT&T with no problem.
Does the International Edition (GT-P1000) have the US 3G Tmobile bands?
Any input is welcome, thanks.
Click to expand...
Click to collapse
Welcome to the fray. Grab a beer and get comfy... because the Euro version does not play with TMobile's 3G network in the US.
If you are technically inclined, it seems we could use some more hands trying to figure out a fix for this issue.
mail_e60 said:
Does the International Edition (GT-P1000) have the US 3G Tmobile bands?
Any input is welcome, thanks.
Click to expand...
Click to collapse
The T-Mobile Tab does not have the hardware to support European 3G bands... That's why I believe the euro firmware people are flashing only works for voice/edge on T-Mob...
That would make sense that the International (Euro) version does not have US Tmobile 3G bands... it makes me wonder if the limitation is in the hardware or software.
Do we have any indication that the limitation is in the software, other than the fact that a US Tmobile version exists?
TurckBoatTruck said:
Welcome to the fray. Grab a beer and get comfy... because the Euro version does not play with TMobile's 3G network in the US.
If you are technically inclined, it seems we could use some more hands trying to figure out a fix for this issue.
Click to expand...
Click to collapse
dalethefarmer said:
The T-Mobile Tab does not have the hardware to support European 3G bands... That's why I believe the euro firmware people are flashing only works for voice/edge on T-Mob...
Click to expand...
Click to collapse
I am certainly no authority on any of this, but this looks to be incorrect. From my reading of the posts on this issue... the Euro version of the Tab (specifically, its modem.bin file) isn't set to work with TMobile's 3G network as the that network operates on a frequency that isn't used in Europe.
User rotohammer looks to have the most knowledge on what it is going to take to make this happen -- but keep in mind that most of us have TMobile Tabs and are needing a solution with that fact in mind. The general thought was that we could use the firmware from a Euro version to give us voice-calling capability, and then hack-in support for TMobile's 3G network.
sheesh, I wish I would have paid attention in school because I want to be a bit more useful with all of this.
mail_e60 said:
I am testing the International Edition of the Samsing Tab (GT-P1000, with the phone functionality built in out-of-the-box and the white backplate). Here in the US, when I insert an AT&T SIM card I get 3G speeds (peaked at 6 MB downstream recently), but when I insert a Tmobile SIM card I seem to only get EDGE speeds (not 3G, around 0.1 MB downstream). The Tmobile SIM card works at 3G speeds on another phone, so I know it's not he SIM card. I can get voice calls on both Tmobile and AT&T with no problem.
Does the International Edition (GT-P1000) have the US 3G Tmobile bands?
Any input is welcome, thanks.
Click to expand...
Click to collapse
Is there a solution to this yet?? I recently got hold of a P1000 from Germany. Thanks a ton!
adept777 said:
Is there a solution to this yet?? I recently got hold of a P1000 from Germany. Thanks a ton!
Click to expand...
Click to collapse
According to what I have figured Out....it disappointed me too, But!!
GT-P1000 is not capable of running 3G Tmobile network
The Hardware CPU, Radio Chip...is capable and is switchable to the band of 1700/2100 MHZ.
The Radio Amplifier is not Capable of 1700/2100 MHZ bands....so us who have International Version of the Tab is Screwed!!!
The proof = I flashed my GT-P1000 using Tmobile Modem to switch and ENABLE 1700/2100....I can only have Edge+Voice...when I flash to T849 modem....the Tab gives No Signal
if the GT-P1000 was capable of handling 1700/2100 Bands easily then my Tab should do 3G only by using T849 TMobile Tab modem Bin
I am a google nooby and is doing what I could....those are what I found out...seem like I have to sell my GT-p1000 Soon.
Or switch to at&t and 3g & voice work
Sent from my GT-P1000 using XDA App
quattr0 said:
Or switch to at&t and 3g & voice work
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
This is the only way...yeah...wait til TMobile release Phone + data on tab...or switch to ATT
The international version and the ATT tab is about the same....the 1700 mhz band is shot out.....
Samsung exclusively included 1700 for US tmobile just as they exclusively make cdma tab for the sprint and verizon.......
No hope....m selling mine, or return to the place i bought from and lose 200 usd
****If buying this tab for phone call and edge only***** I rather go for the Ipad 2 or Iphone 5 in a few months
US tmobile have a unique stupid bands on their 3G....and all of the phones or tabs they have suck monkey *****....
Hi everyone I was reading Motohammers post in the developers form about being able to get 3G on a GT-P1000.
My question is this... It's my friends tab and I am not able to get 3G at all. He doesn't care about being able to use the phone, but would like to use 3G data if he is out of wifi.
info in the tab:
firmware= 2.2
baseband= P1000XXJHA
Kernel ver= 2.6.32.9
[email protected] #1
build number= FROYO.XXJMA
I followed Rotohammers T-Mobile Modem Switcher, but am getting
stderr: Unable to chmod /data/local/tmp/
redbend_ua: No such file or directory
stderr: /data/local/tmp/redbend_ua: not found
I followed the directions exactly and still no go... followed another guys post to install files on the internal sd card and still can't get 3G to come up no matter what.
The SIM card I am using is from a Galaxy Captivate S with voice and Data (6gig plan) on Rogers....
Any ideas?
Thanks very much!
M.
@fishguyis
Have you tried flashing a Rogers modem? At the end of your post you say you are using a voice/data sim on Rogers, not sure if you have tried this or if it will even work but as far as I know if you flash a modem that doesn't work you just won't have a signal, and you can just flash back to a modem with signal, if you got the modem switcher working and you just don't get a signal or if you only get edge, most of the time you can rename another modem to match roto's modem name in the switcher and swap the modem you want to flash with the modem that roto includes with the switcher, like if you want to try a Rogers modem just rename it to match and swap with roto's included 3g modem, I hope that is not to confusing I can't think of any other way to explain it, I hope this helps in anyway and I hope you get it working.
Sent from Githrog's GT-P1000 using XDA App
fishguyis said:
Hi everyone I was reading Motohammers post in the developers form about being able to get 3G on a GT-P1000.
My question is this... It's my friends tab and I am not able to get 3G at all. He doesn't care about being able to use the phone, but would like to use 3G data if he is out of wifi.
info in the tab:
firmware= 2.2
baseband= P1000XXJHA
Kernel ver= 2.6.32.9
[email protected] #1
build number= FROYO.XXJMA
I followed Rotohammers T-Mobile Modem Switcher, but am getting
stderr: Unable to chmod /data/local/tmp/
redbend_ua: No such file or directory
stderr: /data/local/tmp/redbend_ua: not found
I followed the directions exactly and still no go... followed another guys post to install files on the internal sd card and still can't get 3G to come up no matter what.
The SIM card I am using is from a Galaxy Captivate S with voice and Data (6gig plan) on Rogers....
Any ideas?
Thanks very much!
M.
Click to expand...
Click to collapse
hey what worked for me is i put the modemswitch folder into the INTERNAL memory[main folder] and i also put the switch.sh file into INTERNAL..
iono why it wasnt working on my external SD[got same errors as you] but once i did this...everything worked fine and i didnt get the error you got.
let me know if that helps you. as of right now my modemswitch folder is still located in my internal memory and i can switch back and forth easily.
edit- didnt see that u did this already. umm try to do it a few times. last night it wasnt switching for me.. so i charged the tab all the way up, switched my wifi off and did it again this morning and it switched for me..
magnum_touchpro said:
hey what worked for me is i put the modemswitch folder into the INTERNAL memory[main folder] and i also put the switch.sh file into INTERNAL..
iono why it wasnt working on my external SD[got same errors as you] but once i did this...everything worked fine and i didnt get the error you got.
let me know if that helps you. as of right now my modemswitch folder is still located in my internal memory and i can switch back and forth easily.
edit- didnt see that u did this already. umm try to do it a few times. last night it wasnt switching for me.. so i charged the tab all the way up, switched my wifi off and did it again this morning and it switched for me..
Click to expand...
Click to collapse
Hey magnum,
I have tried at least 50+ times hitting the switch shortcut and i always get the same error...
I noticed in the post there was a problem with the switch.sh file from the OP but he said he fixed it... I re-downloaded the zip and tried everything again and still get the same error. ARGH getting frustrated LOL
fishguyis said:
Hey magnum,
I have tried at least 50+ times hitting the switch shortcut and i always get the same error...
I noticed in the post there was a problem with the switch.sh file from the OP but he said he fixed it... I re-downloaded the zip and tried everything again and still get the same error. ARGH getting frustrated LOL
Click to expand...
Click to collapse
idk, try to switch over to the overcome rom/kernel[if you haven't already] and try it that way if you want the 3g..
i must say the euro tab is nice and the 3g works good, i was video chatting earlier with no lag and even hit H speeds, not sure the big difference between 3g and H tho.
oh yeah my sim was from my tmo vibrant/g2 so it seems like we have the same set up, just dont understand why you are getting that error.
oh heres the info for my tab
model - gtp1000
firmware-2.2
baseband-t959tjl3 roto-2g
kernel version
2.6.32.9
[email protected] #45
build # overcome v1.2.0
just giving you the information so you can match it up to mine to see if the 3g works. good luck bruh
magnum_touchpro said:
idk, try to switch over to the overcome rom/kernel[if you haven't already] and try it that way if you want the 3g..
i must say the euro tab is nice and the 3g works good, i was video chatting earlier with no lag and even hit H speeds, not sure the big difference between 3g and H tho.
oh yeah my sim was from my tmo vibrant/g2 so it seems like we have the same set up, just dont understand why you are getting that error.
Click to expand...
Click to collapse
I am not sure if this makes a difference but the GT is from Bell Mobility and if I go to "wireless/network", "mobile Networks", network mode, I get GSM/WCDMA (auto mode)
GSM only
WCDMA only
Does that mean there is no 3G available at all?
Thanks for your patience, I have been reading like crazy...
M
fishguyis said:
I am not sure if this makes a difference but the GT is from Bell Mobility and if I go to "wireless/network", "mobile Networks", network mode, I get GSM/WCDMA (auto mode)
GSM only
WCDMA only
Does that mean there is no 3G available at all?
Thanks for your patience, I have been reading like crazy...
M
Click to expand...
Click to collapse
no because mine has gsm/wcdma in automode also and i get 3g..
im not sure about bell mobility GT but if its not working after all the work you should probably try to flash over to Overcome and see if it changes anything.
magnum_touchpro said:
no because mine has gsm/wcdma in automode also and i get 3g..
im not sure about bell mobility GT but if its not working after all the work you should probably try to flash over to Overcome and see if it changes anything.
Click to expand...
Click to collapse
Ok I will read up on how to flash over to Overcome.
Thanks SOO much for you help Magnum I really appreciate it.
I came from iOS and was very comfortable with jailbreaking etc. This is very new to me but I am LOVING ANDROID!!!!!!
M.
magnum_touchpro said:
no because mine has gsm/wcdma in automode also and i get 3g..
im not sure about bell mobility GT but if its not working after all the work you should probably try to flash over to Overcome and see if it changes anything.
Click to expand...
Click to collapse
So you are saying that you have Tmobile 3G on your TAB International Version GT-p1000 ? If so Please let me know what you did to have it ?
yes I have 3g on my tab when I switch to it.. look @ my sig thats everything I have installed..just install the same rom and kernel I have.
Sent from my GT-P1000 using XDA App
magnum_touchpro said:
yes I have 3g on my tab when I switch to it.. look @ my sig thats everything I have installed..just install the same rom and kernel I have.
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
I think I may have a problem here....I flashed my Tab with the JJI latest firmware from Samfirmware....and I failed to reflash it to another PDA....I doubt that I could reflash everything to what u have now
What makes you have the 3G anyway ? is it the modem ? or is it the Rom ? Kernel

3g problem i9505

i bought a unlocked galaxy s4 i9505 and im using it in mexico with a telcel chip, the problem is that now im having problems with the 3g, sometimes it gets the signal but its only for a short time, im only getting edge, i dont know what might be the problem, the 3g frequency here is 850 mhz so it is supported by the i9505,so if anyone might know something that can help me i would appreciate it. thanks!
asr7 said:
i bought a unlocked galaxy s4 i9505 and im using it in mexico with a telcel chip, the problem is that now im having problems with the 3g, sometimes it gets the signal but its only for a short time, im only getting edge, i dont know what might be the problem, the 3g frequency here is 850 mhz so it is supported by the i9505,so if anyone might know something that can help me i would appreciate it. thanks!
Click to expand...
Click to collapse
Probably a provider issue due to bad coverage. Have you tried inserting a simcard of a different provider from a friend/relative to see if reception is better or tried reception on other locations with your simcard?
calls ardiods
gee2012 said:
Probably a provider issue due to bad coverage. Have you tried inserting a simcard of a different provider from a friend/relative to see if reception is better or tried reception on other locations with your simcard?
Click to expand...
Click to collapse
i tried inserting my simcard on another phone more specific an iphone 4s, and the iphone does get 3g, also i inserted in the s4 the simcard from a friend and it gets 3g for a short period of time but then it goes to edge again.
I too have a similar problem although I think mine was down to stupidity!
Anyway, try setting the Network to either 3G or 2G/3G only and not 4G/3G/2G. That's fixed it for me anyway!
asr7 said:
i tried inserting my simcard on another phone more specific an iphone 4s, and the iphone does get 3g, also i inserted in the s4 the simcard from a friend and it gets 3g for a short period of time but then it goes to edge again.
Click to expand...
Click to collapse
gnasher666 said:
I too have a similar problem although I think mine was down to stupidity!
Anyway, try setting the Network to either 3G or 2G/3G only and not 4G/3G/2G. That's fixed it for me anyway!
Click to expand...
Click to collapse
yes i already tried that, but it doesnt works, it only gets me edge signal, and sometimes but a very few times it gets 3g but only for a moment then loses it, i have no idea what can be happening
asr7 said:
i bought a unlocked galaxy s4 i9505 and im using it in mexico with a telcel chip, the problem is that now im having problems with the 3g, sometimes it gets the signal but its only for a short time, im only getting edge, i dont know what might be the problem, the 3g frequency here is 850 mhz so it is supported by the i9505,so if anyone might know something that can help me i would appreciate it. thanks!
Click to expand...
Click to collapse
Are you using an original or a self made one out of a regular sim?
I had a similar problem using a self cut microsim. Replacing it with an original one solved it for me.
andymihail said:
Are you using an original or a self made one out of a regular sim?
I had a similar problem using a self cut microsim. Replacing it with an original one solved it for me.
Click to expand...
Click to collapse
it was an original one, the carrier cut it for me, and it was working great but suddenly it started having problems, also i put the same sim on an iphone 4s and there it does works, but i will try that maybe it can work on the s4, thanks!

3uk and band 20

I really like this phone, but I'm put off by the missing band 20as 3uk uses it.
Is it still worth buying it?
Yes, do not have 4g in all parts of Holland but I mostly sit on Wifi so I do not bother.......
Phone is great in my opinion.
zerosum0 said:
I really like this phone, but I'm put off by the missing band 20as 3uk uses it.
Is it still worth buying it?
Click to expand...
Click to collapse
Its fine with Three and EE.
Check willmyphonework.net
Says "maybe" with 3,in reality, having the phone I've no LTE. My Nexus 5 was on h+ most of the time anyway, so I'm happy with that. Getting 20mb down
zuk z1 lte band unlock available ??

Categories

Resources