Anybody has used the voice dial system? In the normal case, the phone will replay the voice tag after it recognises the voice command, but I find it does not work occasionally!
Anybody meet the same problem?
I was able to get Internet Calling (integrated VoIP) on the mogul working with the Gizmo VoIP service. The big problem is that the volume is so low it is pretty much unusable. I followed all of the guides here on xda and came up with the same issue as everyone else; i could not get internet calling to show up on the today screen and i did not have any of the internet options under the phone settings. What solved it for me was Schap's Setup VoIP tool version .3. This tools gives us the ability to now set the items that us Mogul users do not have available under the phone settings.
In a nut shell:
1) install WM6VoIP.CAB then reboot
2) install SetupVoIP_v0.3.cab (Schap's VoIP tool)
3) open Schap's config tool and set:
a) all of your SIP settings.b) Set outgoing calls using VoIP to Whenever available.c) enable VoIP over 3G.
Now when you go to your phone dialer it should now show the name of your VoIP service at the top rather than your carrier (Sprint PCS in my case). You will have to force your internet to connect first (i use PIE to start my internet connections up, not sure of a better way to do this.) Now you will be able to make and receive VoIP calls. I have verified this by calling another phone and seeing that the caller ID is from my VoIP. I have also been able to stay on a call and browse the web at the same time (not normally possible on sprint). The 1X icon never appears over my Evo icon while on the phone now. Interestingly enough i could not get this to work over WiFi, it would only work on Evdo.
This integrated VoIP is so seamless that it pains me to use another app just because of this volume issue. I have tried:
Skype. Works great, but not with Gizmo.
SJPhone. Works with Gizmo, but is VERY choppy.
GoSip. Works great with Gizmo, but is very big and slows the phone down.
Fring. Works great with Gizmo and the mem usage is great, but has no dial pad and that pretty much makes the app useless.
Wengo. Works great with Gizmo. Mem usage is on the big side, but is manageable. Seems to be the best for me so far.
I have tried many others that either work as dial out only or only work with their makers SIP service.
Any other ideas or thoughts?
Thanks,
JD
You got the mic working using Fring ? I always got one way audio
What version of WM6VoIP.CAB did you use ?
The mic did work for me on fring. However, the instant that i realized that i didn't have a dialpad i removed it. I use VoIP mostly for conference calls and i need to be able to enter in conference room passwords.
How would i be able to tell what version of WM6VoIP.CAB i am using? I cannot find version information anywhere.
JD
You are lucky with the Fring since there is many complaints from Mogul owners that Mic doesn't work
What version did you use ?
When I was searching for the WM6VoIP.CAB there was indication that there is some new version but the link was dead when I tried to download
Can you please post it here?
When i tried Fring it was a few months ago and i don't remember the version number. I do remember using my bluetooth headset for SIP rather than the internal mic and speaker. I just tried the newest version of fring (downloaded last night) and my internal mic and bluetooth headset now do not work for SIP. Interesting.
For WM6VoIP.cab I searched here on XDA and downloaded the first link i found. Here is the one that i used, not sure if there is a newer version? http://218.93.115.138/d900/patch/WM6VoIP.CAB
JD
That's the same I'm using ... I did read some article about this couple weeks ago ( can't find it) where there was reference and non working link to new version of this file.
Did you read this post ? :
http://www.eten-users.eu/lofiversion/index.php/t8854.html
There is reference to switch.cab ( can't find link to download it )
switch.cab
Try this:
http://www.etenblog.com/downloads/Software/switch.cab
I did, it did install ok but it doesn't work
Thanks
well i tried the configuration and everything, but the thing is that when i try to call out it says dialing then it says call ended, like it doesn't even ring. I entered the correct settings and everything.
I did everything and it DOES NOT show on my Today screen, I see the item "Internet Calling" checked in the today screen options. Any ideas?
Telus phone right ?
I if so that's normal with the Telus ROM
lifeisfun said:
Telus phone right ?
I if so that's normal with the Telus ROM
Click to expand...
Click to collapse
No, I have a Sprint Mogul with the "unofficial" leaked GPS rom. Anyone else know how to fix this? I really need this to work, thanks a lot.
It will not show on your today screen. When you go to your dialpad, the name of your VOIP provider should be listed at the top rather than sprint. If it shows that then you should be good to go.
JD
When you make a call, does the sound come through the earpiece or the speakerphone?
How can I have the sound coming from the speaker on the screen side instead of the back speaker?
Thanks!
I'm afraid you can't
I'm wondering if anyone is working on improved voice dialing capabilities for the G1? I see in the 1.5 update that it says something about improved voice recognition, but I can't tell if that applies to the voice dial problem. That problem being that the way it is now, you have to touch the phone to place any call other than redial. Is this an android issue or a T-mobile issue?
Just a bump... really? Nothing?
Voice dialing on the G1, in my opinion, is still pants. I am using JF 1.5 and voice dialing works sometimes, but not enough that you can rely on it. Since it is in the 1.5 developers release I would have to say it is a Goggle, not carrier, problem.
- The voice recognition is spotty at best. "Call voice mail" Gave me voice mail as an option but I had to click on the screen to choose it. Worse yet the first choice in 1 out of 3 attempts was "call Oscar on Mobile".
- As far as I know you can not set up voice dial to start by hitting the call button on your BT headset. So you have to pull out the phone to initiate a call.
- Even if you could initiate a call via your headset Android does not give you any audio cues as to whom it decided you are trying to call. i.e. machine generated "call voicemail?" then you say yes to dial them.
On the other hand voice search capabilities did improve quite a bit and it is actually useful now. It is often easier for me to initiate a search by simply saying it then whipping out the keyboard.
Maybe I'm just not up on the lingo, but I'm not sure what "is still pants" means, unless it's a typo.
The voice recognition is okay, the times I've used it it hasn't made any mistakes, unless I'm trying in a very noisy area. For the numbers I call often, I find that putting a shortcut on the homescreen helps, but voice prompts are necessary and this should be addressed. If it is a google issue, do you have any thoughts on how to voice this issue to the proper place?
I got my epic recently and use it a lot for work. I have google voice installed so I can make calls over my wifi and not use any minutes. I have ALOT of minutes for work purposes working from home since I have no home phone. While the call works fine, my touch tones do not seem to go across fully. It recognizes some keys like if I press #. However, I always get invalid entry so something isnt working right. Anyone have any idea on how to resolve this?
How are you able to make calls? When I try to do this over wifi, I get an error message saying that i need to be connected to the network even though I am. Please let me know how I can use my wifi connection and make and recieve calls.
I was wrong anyways Google voice just acts as a middle man and still uses minutes. There is a way to use sipgate to use wifi but I haven't yet.
Sent from my SPH-D700 using Tapatalk
I've read about various HD Voice problems right after release but not much in the past few weeks. Am I the only one who can't seem to get HD Voice working on LTE? It works great on Wi-Fi Calling but as soon as I disconnect from Wi-Fi it doesn't even seem to attempt HD Voice when I initiate a call.
Anyone else?
Any solutions?