is some one used vlc media player for video streaming on network.
like i have dreambox digital setellite receiver which work through a lan card. and is connected to router. i installed latest version of vlc media player on my system. now if i will open the page of dreambox by using its ip. i can easily see channels on other computer.
but now i also like to use vlc media player on my pocket pc to se setellite channel through wifi.
is some one have any idea to do vlc media plyer is also availble for pocket pc.
thanks
hi,
I tried the vlc port for windows mobile (0.83 I think), not for streaming but just local playing and I found that it sucked. Compared to betaplayer it is way less performance and files have to have a very low bitrate to be played correctly. You could give it a try, there is a port available but you have to expect performance problems.
regards
marco99
I have a mda vario/wizard on t-mobile uk network... when i tried streaming using the streaming video program i think its windows media player, but it says "live streaming is not supported" when i try to connect it goes to "rtsp://" what do i have to put in? i don't know! I have also downloaded realplayer one. Can i use this as a default player? and if so how do i do it.. Does anyone have any on the ideas?
thanx
gskyn
gskyn said:
I have a mda vario/wizard on t-mobile uk network... when i tried streaming using the streaming video program i think its windows media player, but it says "live streaming is not supported" when i try to connect it goes to "rtsp://" what do i have to put in? i don't know! I have also downloaded realplayer one. Can i use this as a default player? and if so how do i do it.. Does anyone have any on the ideas?
thanx
gskyn
Click to expand...
Click to collapse
This might shed some light, but I haven't tried to live stream anything so I don't know first-hand.
Media guide
You can open a browser page that allows you to access a media guide
with links to streaming media sites and files.
To stream from the Internet:
1 Configure your RealOne Player default access point (see “Default Access Point setting”).
2 From the main Menu, open Services (XHTML browser).
3 In the Bookmarks view, open the Mobile Media Guide bookmark.
Note: In the RealOne Player, you can only open an rstp://url
address. You cannot open an http://url address.
4 Find a link to a streaming site that interests you, and select the link.
Click to expand...
Click to collapse
Enjoy,
--M
i tried all the time to watch streaming in the media player
like
mms://
but the media player find the streaming but only audio is on
the video i cant see why?
do i need codec or somthing???
playlists in wmp
can someone tell me how to add my songs which are in the storage card to the playlist so that I do not need to go down to the file explorer?
What I did was the following!!
I added the songs to the library but nothing seems to be there! But there are 128 songs it has searched///
i know i am missing somethng out there but what I do not know///
streaming
bubu23 said:
i tried all the time to watch streaming in the media player
like
mms://
but the media player find the streaming but only audio is on
the video i cant see why?
do i need codec or somthing???
Click to expand...
Click to collapse
In my case, i get the video but not the sound>>>> Interesting.... I also used mms:// location to load the video file... Windows Media Player 10 for mobile is not the same as that of windows-xp one ... however, they should not miss the basic things...
any ideas boys and girls... on this issue..
Hi, in you media player options, go to the network tab, and set it to 128 or higher, and uncheck detect internet connection speed, it should play video then.
your the best its working
thanks my friend
thank you also. It works great
since i sold my iphone to buy a desire there has only been one thing that i have missed having. and that is being able to stream video content from my pc over my home wifi network onto my phone. i did this with an app called air video on the iphone. it converted all video while streaming it so i could play my divx videos from pc onto my phone anywhere in range of my wifi network without having to convert them first.
is there anything that lets me do this for android?
Gmote 2.0 will do this for you
Be warned need to have the right player for the file extension.
i.e. cant play .avi files as android doesnt have a good player etc..
I do this using stock apps on my phone, and a simple webserver on the other end.
I've done this with relative ease...
Any modern webserver with directory browsing enabled (IIS7/Apache)
Ability to modify/add content types within the webserver
Local cache of h264 or 3gp media (i.e. streamable)
Browse to movie using any browser on your Desire and stream over WiFi
** Addition **
IIS7 (possible with Apache as well)
ICYBOX IB-NAS4220B (Any SMB/NFS/CIFS NAS Box will work)
Directory browsing enabled
Symbolic Link (Virtual Directory) to NAS box share over LAN
Browse to movie using any browser on your Desire and stream over WiFi
If you need a hand attempting this, chuck me a PM...
p.s. If you're running a windoze box, then you have IIS already.
use TVersity on your computer..and then you can just point your phone to the given IP address..save it as a bookmark in your phones browser... or shortcut
Phil750123 said:
Gmote 2.0 will do this for you
Be warned need to have the right player for the file extension.
i.e. cant play .avi files as android doesnt have a good player etc..
Click to expand...
Click to collapse
Rockplayer will play AVI
use androstream or vlc stream and convert
Well the best and easiest way i figured out, was making the movie folder accessible to the Network and connect to the folder through the Cifsmanager. As player I use pLayer, which is really the best player for Android.
You could always try VLC-Shares.
It does have a fair amount of setup though.
http://code.google.com/p/vlc-shares/
This might be dead already, but try Vplayer.
As affmalg, CifsPlayer, then browse your network files as if they were on your phone = so simple
Use Opera Unite with Stream Media add-on ... works on Windows and Linux and streams everything as flash ... work really good on my HTC Desire
http://www.plexapp.com/
I liked the look of this and downloaded the PC side of it to realise that all I wanted do was access my photos in a nice graphical interface. Upon setting up this is for movies only...
Unless someone can confirm otherwise, the android app side of it costs approx £2.99
thank you very much. i know im in the wrong place (same goal, gtab 10.1) but gmote worked beautifully. even loaded up the built in subtitles when i played with moboplayer.
TheRavenGod said:
Use Opera Unite with Stream Media add-on ... works on Windows and Linux and streams everything as flash ... work really good on my HTC Desire
Click to expand...
Click to collapse
That sounds interesting. I'm going to test it soon.
Thanks for the hint..
http://www.appbrain.com/app/littleplayer/fr.mydedibox.littleplayerpro
works like a charm, it's awesome and simple.
Not sure if this has been recommended. I saw a gadget called Wireless Media Stick that can help you with this.
Go here hsti.com/stick/
The won recently in Electronics Expo and is now running a limited time $20 discount promo on their product. Check them out.
Hello,
Install a samba server on your pc.
On the mobile use cifs and local player like "arcmedia" or my favorite "moboplayer"
Simple and faster. I use it often
Sent from my HTC Desire using XDA Premium App
I'm using VLC (H.264+MP4)+port forwarding+VPlayer for streaming analoge TV channels. Works fine
Gmote 2.0 and the arcMedia player works very well for me. It's a painless install and set up procedure too.
Sent from my HTC Desire using XDA App
This might be of interest to some of you. I use DLNA to stream to my phone from my PC and NAS and also to show photos and video from my phone on my TV!
http://forum.xda-developers.com/showthread.php?t=1169349
I was hoping to update the guide a bit last weekend but didn't get the chance.
can someone try to work on ps3 media server settings ,on the fly trans coding maybe is better option then changing whole library of movies.It work for xbox maybe its gonna work on transformer
# ps3mediaserver renderer profile for Android
# Refer to PS3.conf for help
RendererName=Android
RendererIcon=android.png
UserAgentSearch=Android
Video=true
Audio=true
Image=true
SeekByTime=false
TranscodeVideo=MPEGAC3
TranscodeAudio=MP3
DefaultVBVBufSize=true
MuxH264ToMpegTS=true
MuxDTSToMpeg=true
WrapDTSIntoPCM=false
MuxLPCMToMpeg=true
MaxVideoBitrateMbps=0
MaxVideoWidth=0
MaxVideoHeight=0
TranscodeExtensions=
StreamExtensions=hdmov,hdm,flac,fla,dts,ogg,asf,asx,m2v,mkv
it wont work. the only thing you can transcode too is mpeg2 which the transformer cant do over upnp. mp4 cant be live streamed over upnp only over rtsp or rtmp, if you really want live transcoding look at vlc media player and vlc s+c for android. it takes a lot of tweaking but does work.
can you provide some more information about the transcode capabilities such as the lackof mpeg streaming
SangreSlayer said:
can you provide some more information about the transcode capabilities such as the lackof mpeg streaming
Click to expand...
Click to collapse
I have had no problems streaming mpeg2 even to the native player with Mediatomb. In fact, you can directly play mpeg2 files from an internet site (internet archive) if you have enough bandwidth. Even the matroska format will stream, although without sound and at an unpredictable framerate. Still, I think that problem is on the encoding side.
So what your saying is you can transcode with PS3 media server?
IE: if you were to take a video gotten from a generic source, lets say via bittorrent you can stream that with the PS3 media server?
Any video I try does not work. it only works if I transcode it with handbrake first.
any tips would be greatly appreciated.
SangreSlayer said:
So what your saying is you can transcode with PS3 media server?
IE: if you were to take a video gotten from a generic source, lets say via bittorrent you can stream that with the PS3 media server?
Any video I try does not work. it only works if I transcode it with handbrake first.
any tips would be greatly appreciated.
Click to expand...
Click to collapse
If I was you I would go and get a WD media player. They go for about 60-90 bucks. I used the PS3 for about a year and I gave up. Mkv is not support on ps3 media server. Videos that it cant play you're pc will need to transcode before sending it over to your display. I ended up getting a dedicated media player. There are tons to choose from. WD, boxee, popcorn hour and dune players. No issues streaming 20-30GB blu ray movies when I had the WD player. PS3 sucks for streaming IMHO.
Actually, mpeg2 can be streamed over upnp.
Try this:
Code:
# ps3mediaserver renderer profile for Android
# Refer to PS3.conf for help
RendererName=Android
RendererIcon=android.png
UserAgentSearch=Android
Video=true
Audio=true
Image=true
SeekByTime=false
TranscodeVideo=MPEGAC3
TranscodeAudio=MP3
DefaultVBVBufSize=true
MuxH264ToMpegTS=false
MuxDTSToMpeg=false
WrapDTSIntoPCM=false
MuxLPCMToMpeg=false
MaxVideoBitrateMbps=0
MaxVideoWidth=0
MaxVideoHeight=0
TranscodeExtensions=
StreamExtensions=
frosty5689 said:
Actually, mpeg2 can be streamed over upnp.
Try this:
Code:
# ps3mediaserver renderer profile for Android
# Refer to PS3.conf for help
RendererName=Android
RendererIcon=android.png
UserAgentSearch=Android
Video=true
Audio=true
Image=true
SeekByTime=false
TranscodeVideo=MPEGAC3
TranscodeAudio=MP3
DefaultVBVBufSize=true
MuxH264ToMpegTS=false
MuxDTSToMpeg=false
WrapDTSIntoPCM=false
MuxLPCMToMpeg=false
MaxVideoBitrateMbps=0
MaxVideoWidth=0
MaxVideoHeight=0
TranscodeExtensions=
StreamExtensions=
Click to expand...
Click to collapse
Though it should be worth noting UPnPlay doesn't send a "streaming end" HTTP header to the UPNP server, so after you play one video PS3 media server doesn't know you stopped watching the video and will be stuck in the "streaming mode", causing any other video not to load until you restart PS3 Media Server. This problem only persists iwth PMS, Serviio works fine if you set the transcoding profile. I wish PMS worked as it is the only Server with full softsub support.
Edit: Opps accidentally pressed "Quote" instead of edit...
Just wanted to make sure i am trying with the same player as you.
I am using the "my Net" and selecting the ps3 media server from there.
With the new settings, when I go to play it it just hangs with "please Wait" previously it would just immediately end with "fail to load"
SangreSlayer said:
Just wanted to make sure i am trying with the same player as you.
I am using the "my Net" and selecting the ps3 media server from there.
With the new settings, when I go to play it it just hangs with "please Wait" previously it would just immediately end with "fail to load"
Click to expand...
Click to collapse
Did you edit Android.conf with my profile and then restarted the server? Also, use Upnplay combined with MoboPlayer.
I did edit the file with your settings and restart the server. Will download Upbplay (already have mobo installed).
Update in a few minutes
That does seem to work. I am able to play non HD videos.
I was able to play different video's back to back without restarting, I tested with three different videos, watch 1 min of each.
I tested out a topgear episode that is 720p. My PC says its being trans-coded, but moboplayer just says "loading". After 1.5 minutes i cancelled out by going "home"
I then restarted the PS3 media server and reloaded upnplay and tried the video again. my PC still says transcoding and serving but mobo is stuck on loading.
Under Transcoding settings, i don't have Avisynth/FFmpeg or Avisynth/Mencoder available as they are marked red if that means anything
Any suggestions?
Thanks for being so helpful. I really appreciate it.
I know this post is asking about ps3 media server, and I have tried to use it also, but what I have found is a media server called PLEX, there is a mac/windows/even Linux server version, then you get the client on the app store for $5. I can not believe how well this app allows me to stream VOB/MKV/MPG,etc, and it allows me to do this all the way up to HIGH PROFILE 1080p MKV, oh and it also allows me to do this on a remote wifi connection or even on 3g, it really is amazing what these guys have pulled together. The other HUGE plus is it is a branch off of XBMC, so you have the same similar interface with all scraping, etc automatically, it can also do music and supports plugins. Anyways I would suggest you try it, server is free to download, and the app is so worth the measly $5, just suggest you get the server all setup and working before you buy the app. but even if you don;t like it the plex team will refund your money if you are not happy so there is really no remorse checking it out. Hope this helps, I am off to watch a 1080p high profile mkv on my transformer >
I think OP is trying to get PMS working so he can watch media on his PS3 too without running 2 servers. As to why HD vids don't play, maybe it didn't detect the need to transcode it, I need to look into this again after exam's over (maybe that'll explain why my videos didn't play properly when I tested), feel free to use the PS3.conf and try different things. It doesn't matter if you have ffdshow/avisynth, it uses bundled mencoder to re-encode. All that matters i that your PC can play the video fine in DirectShow players like Windows Media Player, Media Player Classic, Zoom Player.
I tried the above .conf file settings and still when running an HD video
it won't limit the video size
is there a way to transcode down into say
800x480
I tried this
MaxVideoWidth=800
MaxVideoHeight=480
RobH79: Thanks for the information. So far I am most of the the way to my end goal. The last hold out being the 720p video's.
I believe the OP (like myself) do not want to run 2x renders, one for the PS3, one for the tablet.
Frosty:
The video does play fine on my PC using VLC but not with Windows media player ( I anticipate this is why all my below troubleshooting did nothing based upon your last response.)
I have done some more testing and tried a few different settings in the config, such as
MaxVideoWidth=800
MaxVideoHeight=600
and MaxVideoBitrateMbps=3
so far nothing has worked.
The video does play fine on my PC using VLC. I still see PS3 Media Server using the transcoding buffer, and Mencoder is using varying amounts of CPU and the java memory size is increasing as time goes on (I assume filling up the buffer)
**Update Since I started typing**
I went to: http://matroska.org/technical/guides/playback/windows/index.html and found out that i needed the CCCP pack, i usually dont install it on my system from a bad experience many years ago.
However I installed it and now it plays fine in windows media player.
I loaded up PS3 Media server and tried streaming again from my tablet...
And no luck, same issue as before. I went through all the other variations of the tweaks above and also no luck.
Any other suggestions?
I also tried to get myNet working, but i found this.
myNet uses AwoX as UserAgent name. So copy Android.conf and rename the file and change from:
UserAgentSearch=Android
to
UserAgentSearch=AwoX
But all upnp clients that you can download in the market use Android.conf. I know so far that only AVIs/WMV are working. However no MKVs.
ok... just my 2 cents
I have a tonido plug running ubuntun 9.04 and mediatomb as a server, no transcoding eneabled.
I installed UPnPlay from market as a upnp renderer (audio only, but support to stream video with external palyer)
I got DicePlayer (paid app) and am able to stream mkv, avi, mov, mp4 containers, even some movies that have srt or sub subtitles, however if I connect my tablet to a TV via HDMI I only get the video and not the subs... MyNet app gives a lot of trouble working with m3u playlists and can only render a file at a time, meaning if you want to play continous audio/viedo you need to go one by one manually.
So far I'm happy with this setup, planning on upgragind my local WLAN to "N" standard byt so far 54gb are good, not exellent
On the down side, I haven't got the time to tweak mediatomb to present in a convinient way video files, it throws everything regardless of the folder structure you have on the server hard disk
Edit, if you know how to hard encode and stream subtitles info is appreciated, also if you know to send subs via HDMI to tv I'll be grateful