hi,, is there a reg tweaks that i can make my volume, especially on playing music,more louder??? i prefer to use the original headset of my hd2 but i think its not loud enough even on the highest volume. don't worry my ears are always clean and doesn't have problem. thanks to all!!
Related
Hey All,
Is there any way to make the speaker louder? This is for general music playing, as well as speakerphone etc. On the XDA2 you could turn it up to the point it distorted...but the i-mate etc dont seem to go that high.
is there any 3rd party program to boost the speaker volume (i know it wont go that much higher without distortion, but the option would be nice).
Cheers,
Jez.
me too
This is the only thing, in my opinion, that is not perfect about htis device. I wish the speaker was a little louder for speaker phone. Also, it would be great if someon could figure out how to make speaker phone kick in automatically when you use voice dial.
Re: me too
asymtrax said:
This is the only thing, in my opinion, that is not perfect about htis device. I wish the speaker was a little louder for speaker phone. Also, it would be great if someon could figure out how to make speaker phone kick in automatically when you use voice dial.
Click to expand...
Click to collapse
There is a way with regedit, I'm still looking
im also interested in turning up the volume..
Make the holes a little bit bigger. The sound is muffled by the tiny hole.
@ZZPACKED: keep us informed. Im interested too.
Thanks
double post
Hello,
The speaker is small and can hold only a minimum dbs of sound. If it becomes more louder, you get the sound distorted and may spoil the speaker's cones too. But for low volume sounds, you may try boosting!
Hi Carty, how do you boost the sound?
Cheers
hi
hello everybody ! i`m also finding a way to increase sound of speaker, & in call how it was on mpx200 used to
[HKEY_CURRENT_USER\ControlPanel\SoundCategories\InCall]
"InitVol"=dword:00000005
you can try, may be it seems to me ?! but a little better
I would like to know if there is a way to hack the registry to increase / boost the phone headset volume. Please note I am not talking about the "speakerphone" volume, I just find that when talking to someone on the phone headset it seems alot softer than the Wizard that I had before, even when the volume is set to max.
i would also like to know how to do this. i feel like my wizards ear piece volume was deafening.. but on the tytn its so incredibly low
I don't have a problem with the headset, but even on the highest volume setting the phone's earpiece speaker is a bit too quiet.
Any thoughts anyone?
Thanks.
Same hear, just to darn low at the highest volume setting. I see there are fixes for other HTC phones but nothing specific for this phone. Has anyone on this board managed to hack the registry and find an effective fix to increase the earpiece volume?
i'd love this as well - just bought one of these :
http://www.expansys.com/product.asp?code=138247
and the volume level is VERY disappointing. my wizard used to have an acceptable volume level but i can't imagine being able to hear music on my tytn with traffic around. :-(
I've seen a lot of posts about volume being too quiet, but none about being too loud. I have a Jabra wired in-ear stereo headset, and putting the system volume to it's lowest, non-muted, setting of 20% while turning down the volume of Slide2Play to it's lowest, it is still too loud. It's not too loud to listen to, I just mean I want to be able to make it barely audible if I have to, for instance if a co-worker says something I don't want to be forced to take the headset off.
Is there any way to adjust the volume to somewhere in the 1-19% range rather than 20% being the lowest?
The headset is pretty comfortable, so I'd hate to have to buy an out-of-ear model which I imagine would be less loud at the lowest setting.
Mind you, I don't want to lower the overall volume. I like that it can be loud too, I just need it to be a little more quiet when I'm in the zone trying to bend a piece of code or SQL statement to my will so I don't miss what people say around me.. hehe.
just open ur headset and put a higher value resistor in it.
hope u understand my words.
Thanks for the advice but I'm not much of an electrician.
I'm more looking for a program, cab or registry tweak that allows for greater control of the volume rather than the simple Mute, Quiet, Medium, Loud, Louder, Very Loud settings that our BAs come with.
I found a cab that allows you to adjust the bass and treble which was very handy, but I can't seem to find one that allows more refined volume levels all around.
hv u tried the SRS WOW HD? it has a tab to adjust the input and output gain it decreases the volume level.
sschrupp said:
Thanks for the advice but I'm not much of an electrician.
I'm more looking for a program, cab or registry tweak that allows for greater control of the volume rather than the simple Mute, Quiet, Medium, Loud, Louder, Very Loud settings that our BAs come with.
I found a cab that allows you to adjust the bass and treble which was very handy, but I can't seem to find one that allows more refined volume levels all around.
Click to expand...
Click to collapse
Hmm, that SRS WOW HD does help. Although it seems to like to completely mute my device if I unplug my headphones, or plug them in. It kind of seems like I need to reset the device after I plug or unplug my headset.
Kind of annoying, but music does sound better and I can make it more quiet. Thanks for the suggestion.
Anyone know how to keep it from disabling sound on my device when I plug/unplug my headset?
Hi does anyone know how to do this please?
Its a little too quiet for my liking......
I use the tweak included in HD Tweak that removes the 100db limit. It's just a reg key mod..I would like to know which one is it so that I can remove HD Tweak, as I am using it only for this..
I am running dutty's 6.5 rom will this be different then?
Don't know if it works in WM6.5, but there are chances..Why don't you try it yourself and let us know.I suggest do make a backup before any changes
Try the Audio Boost cabs in this link. I put it on my TP and now my PURE. i recommend the Lighter boost. The Full might ruin the speakers.
http://forum.xda-developers.com/showpost.php?p=3806718&postcount=107
Guys, what about increasing speaker volume when talking?
Not the loundspeaker (which plays ringtone).
Topaz is really quiet, in crowd on the street it's way too hard to hear the interlocutor.
SuperMaximus said:
Guys, what about increasing speaker volume when talking?
Not the loundspeaker (which plays ringtone).
Topaz is really quiet, in crowd on the street it's way too hard to hear the interlocutor.
Click to expand...
Click to collapse
I use Tom's Topaz Setting Tool, try to enable Volume Call (Increase Volume during Call) option in Phone Settings
And the HDTweak way does not ruin your speaker?? Because i'm listening to hardstyle
..you'll always be able to dim volume manually if any distorsion occurs
I just got it and noticed the earpiece volume is still low even with the volume turned all the way up.
Is there a setting I missed or maybe a registry fix?
Any help would be appreciated
HTC HD2
OS 5.2
MANILLA 2.5.2
ROM 2.13
RADIO 2.10
Don't mean to offend you. I had the same issue but was more of a user issue. I kept increasing the volume not paying attention that I was adjusting the ring volume and not the system volume.
if that doesnt work you may need to return it. My friends HD2 had low speaker volume and low earpiece volume. As much as we tried, we couldn't get it to go.
N1M1TZ - No offense taken, I only adjusted the volume during a call and at max it is still quiet.
I checked the settings/sounds, no adjustment for the earpiece just the ringer and the system sounds.
marduk79 - after doing a little digging I have found that this is a common problem with this particular batch of phones.
The first batch came out and the volume was set way to high that it was actually blowing out the earpiece.
I think I may have found a solution, if it works I will post it.
Thanks for the assist.
So what is the solution... My first one had sweet loud ear piece volume. But alas, the speaker blew. My replacement is alright, but I want it to be a tad bit higher... Lots of years of loud punk rock have made me slightly def I think...
Anyone know if there is a cab or registry tweak or something that will make the volume louder in the ear piece speaker?
marduk79 said:
if that doesnt work you may need to return it. My friends HD2 had low speaker volume and low earpiece volume. As much as we tried, we couldn't get it to go.
Click to expand...
Click to collapse
How low? Like so low you couldn't hear it, or just low enough to be annoying? Basically my first HD2 was nice and loud. The new one is about 3 bars lower sounding turned all the way up... Which annoys me because I know the other one was louder and it's hard to hear people if I'm in an environment with a lot of background noise.
I feel like if I tried to take it in to get a replacement they would think I was nuts.
headphone and phone speaker too low
I too beleive the headphone volume is way too low, when listening to music or taking a call on the headphones it is barely loud enough too hear if there is any background noise such as traffic or conversations going on nearby. I have the volume about 75% when listening to talk radio stations, on my headset, no background noise present and it is at normal listening level. So if there is background noise, I need 100% for it to be loud enough to hear clearly. The phone speaker is not much better, when listening to calls on speakerphone the percentages are about the same for equvilent listening circumstances. I have tried "AudioPara3 TMO" and notice little or no difference in sound. Does anyone know of anything that will increase the maximum volume level for both speakerphone and headphones?
I'd like to know if there is any registry hack to increase the line out volume as well. My line out volume is very low, I have to put it to about 50 percent to match what would be the 20-30 percent level of my old HTC Touch (Touch 1 to HD2 - quite an upgrade, eh?? )