Possible to install stock T-Mo US ROM on UK G1? - G1 General

Hello all,
I am attempting to install the stock T-Mo US ROM onto a T-Mo UK G1. I have been using it for about a year with the dev phone ROM and it works fine on the T-Mo US 3G. Now I've switched to a different phone and I want to sell the G1, but I want to install the stock T-Mo ROM so it will have access to OTA, full market, and carrier customizations.
When I try to flash the RC29 DREAMIMG.nbh it gives me an error, probably because the phone has a different hardware ID (DREA110 for UK vs. DREA100 for US). I have tried installing it from the dev phone bootloader, I have gone back to the stock bootloader, tried using a goldcard, I'm hitting a dead end now.
Any suggestions? It seems there must be some way to bypass the hardware ID check since the dev phone ROM and customized ROMs will work.
Thanks in advance!
P.S. It will load the UK RC7 ROM, so I'm fairly certain it is just the hardware ID that is the limitation.

I finally got it working. If anyone else is trying to do this, use HardSPL and it will work fine.

Related

What CID Lock do I have?

Hi all,
first of all appologies if I am posting this in the wrong place but I don't think it quite belobgs in ROM development .
My question is basicaly how do I find out what CID lock is on my HD2?
I bought the phone sim unlocked and all is fine. It works fine with my Virgin sim (UK). I would like to upgrade to the latest official ROM as I don't feel ready to experiment with cooked ROMs just yet.
However when I log on to the HTC web site and try to download a ROM it says "Sorry, this software download is not suitable for your device."
I have tried it from both the UK and Europe web sites but get the same result.
The current rom shows no branding of any sort, also there is non on the phone itself.
Is it CID locked to an operators SIM's? If so how do I find out which and will I be able to get a ROM from them if I don't use them?
Or will I have to go the HSPL route and go cooked roms?
Any Help or guidance greatly appreciated.
Regards
Clive
There are truely unlocked phones, and then there are those unlocked but the serial numbers are blocked on request of the service provider. Vodafone, O2 and (I'm guessing) Virgin do this so you can only upgrade when they OK the ROM release.
You can install HSPL which gets around all that and lets you explore the wonderful world of cooked ROMs...read this
http://forum.xda-developers.com/showthread.php?t=609477
ROM lock and SIM lock are not the same and not connected.
If the HTC website says invalid serial, then the ROM is locked. (Probably to Virgin, if that's where you got it from) and you must wait for them (virgin) to release the update. That is the ONLY way to install a new rom without using HSPL/SSPL
EDIT - Oh, and your line "Or will I have to go the HSPL route and go cooked roms?", , , , HSPL isn't just for cooked roms, it will let you install official HTC roms too, if you want, not just cooked ones.
I didn't get it from Virgin, my SIM is Virgin and that's what I put in it. I bought it privately. I'm guessing then it is CID Locked to Vodaphone or the like.
OK so it looks like HSPL is the route to go?
If I want to install an official HTC ROM how can I download it as I have to enter my serial number and it gets rejected? Are they available elsewhere?
Am I likely to loose anything (apart from guarantee ) by installing latest HTC rom and any advice on which one? I guess by that I mean EU or UK versions?
Thanks for the replies by the way much appreciated
Its pretty important that you know who it was locked to, because to uninstal HSPL, or to fix it if things go bad, the very best thing to have available is the stock rom. As for losing guarantee, if you bought it privately then you already lost that, right?
samsamuel said:
As for losing guarantee, if you bought it privately then you already lost that, right?
Click to expand...
Click to collapse
Pretty much although I could send it back through the seller.
Is there way way I can get a copy of the current ROM/SPL out of my phone and save it as a backup?

G2 Touch Hero - Help needed re. android & 3 network

Hi,
I have the G2 Touch hero on t-mobile. It has been unlocked. It currently shows as ROM version 2.73.405.5, Android 1.5.
I want to start using on 3 Network, I have their internet / phone / text package.
I'm very new to this, so please can someone help me and point me in the right direction, as I would like to know the following;
1. How do I upgrade to android 2.1.
2. How do I get the 3 portal stuff to be on the phone when I switch on each time, as I would if it was a 3 phone. In other words switch on as on 3, not t-mobile.
Many thanks for your help.
Use BTDAGs guide linked in my signature to find out how to install custom ROMs.
As yet there are no 3 customised 2.1 ROMs.
You can get the 3UK customised 1.5 ROM in update.zip format from here...
MoDaCo'S Stock ROMs + radios in update.zip format for GSM Hero
Or just use any custom 2.1 ROM and search "3 uk skype apk" and "3 uk MSN apk" for those two apps,... not sure if there are others you may want/need?
Hi ddotpatel,
If I don't use a custom rom, because I find it difficult to do, can I just get an "official" 2.1 upgrade for the phone via t-mobile or 3 network. Which would I need, as its a t-mobile phone, with a 3 sim?
Thank you,
mike300 said:
Hi ddotpatel,
If I don't use a custom rom, because I find it difficult to do, can I just get an "official" 2.1 upgrade for the phone via t-mobile or 3 network. Which would I need, as its a t-mobile phone, with a 3 sim?
Thank you,
Click to expand...
Click to collapse
Now Im not 100% on this.. but would the t-mobile phone not tell the update server it needs the t-mobile update regardless of the sim thats in it?
.. for example.. Ive got an unbranded hero.. with an orange sim.. but I got the unbranded update pushed through to me.
polakscot said:
Now Im not 100% on this.. but would the t-mobile phone not tell the update server it needs the t-mobile update regardless of the sim thats in it?
.. for example.. Ive got an unbranded hero.. with an orange sim.. but I got the unbranded update pushed through to me.
Click to expand...
Click to collapse
Indeed that sounds about right to me,....
There are no UK branded TMobile or 3UK 2.1 ROMs yet, they always take longer to be released. If you dont want to use custom ROMs, and are happy to NOT have root access, you can run the official RUU .exe filefor 3UK from [ROM] Official HTC Hero RUU ROM + Radio Links . This will install android 1.5 (3UK customised) and have your phone set up for updates.
WARNING,.... You might not be able to use custom ROMs ever again once updated to official 2.1.

Orange locked hero _ trying to update to 2.1 - Is it bricked? Help Desperately needed

Hi, appolgies for being completly stupid, If someone can help me i will be very grateful!
I have an orange network locked hero. After getting tired of waiting I attempted to debrand by installing the generic HTC rom ...
RUU_Hero_HTC_WWE_2.73.405.5_WWE_release_signed_NoDriver
With the idea of installing and letting the OTA update occur...
So i installed goldcard tool created and image. and then installed the htc image.
2.1 is now installed but have the network locked message.
I considered trying to unlock via one of the vendors on ebay, but decided it probably wouldnt work so decided to roll back to the orange rom.
By mistake I ran this update which i believe is the HTC 2.1 update
RUU_Hero_HTC_WWE_3.32.405.1_R_Radio_63.18.55.06P_6.35.15.11_release_signed
Now when i try an run the orange uk 2.73.61.66 release I am getting an error message 140 bootloader version error.
The phone isnt rooted, is there any way I can roll back or unlock 2.1. Am i going to have to call orange an confess?
Please help!!!!
Leigh
There is a STICKY at the top of the G2 Hero Development section called Villain Roots 2.1 RUU,.. tried that?
Sent from my HTC Hero using XDA App
By doing this would it allow me to reflash the original orange image?
Sorry for being dim, finding all this a bit confusing!
root it via that guide, put in a radio that works with orange sim cards, and you should be good to go
Use this guide: http://www.villainrom.co.uk/viewtopic.php?f=110&t=2096
Once done you can reflash the original official orange release.
Apologies for being thick...
So I have gsm root running, phone in recovery. What do i do next?
Do i have to flash the rom on using nandroid - never used this before.
try this method - its easier
tinyurl DOT com/3242ljv
you'l need to remake the link as newbies cant post links
Tried the simplified version.
When I try and run the zip file it says it cannot open the file and says it is bad.
Tried a couple of times and with both orange updates..
Arghhh!
Try using a different SD card - hboot couldn't find HEROIMG.zip on one card, tried another and hey presto!
Well in the process of trying to get the orange 1.5 build back on i have got 2.1 working!
Tried flashing an older radio on there and gues what it works. I've now got the standard htc 2.1 build on an orange uk contract, network locked handset.
Quite pleased with myself!
goochio said:
Well in the process of trying to get the orange 1.5 build back on i have got 2.1 working!
Tried flashing an older radio on there and gues what it works. I've now got the standard htc 2.1 build on an orange uk contract, network locked handset.
Quite pleased with myself!
Click to expand...
Click to collapse
Hi,
Please could you give us the radio version you installed, and how you did it. You'll find the version under Settings > About Phone > Software information > Baseband version.
Many thanks,
The radio version i'm using is
update-hero-radio-63.18.55.06_6.35.05.15-signed
I tried the one before that also which worked.(Basically I started from the oldest one and worked my way up)
I tried the two most recent ones first and these didn't work (Network Locked)
Hope that helps
I've noticed Orange have started rolling out the preupdate, think i might as well stick with the htc build.
Cheers

[ROM]RUU_Mozart_TMO_DE_1.28.111.03_5.52.09.16_22.33a.50 _RELEASE

Here new ROM for Mozart
http://www.filefactory.com/file/b48..._1.28.111.03_5.52.09.16_22.33a.50_RELEASE.exe
DO NOT TRY TO FLASH THIS ROM FOR ANY OTHER DEVICE EXCEPT MOZART!
Enjoy!
THNX a LOT!
Hopefully it fixes my problems with sending text messages.
Will I lose my data (mainly my SMSes) if I install this update?
//EDIT -> according to several forums, I will lose my data...
and I haven't found any solution to backup my SMSes - yeah -.-
Is there anything I should regard or be aware of before updating?
//EDIT -> I just tried updating my phone and don't know how. It boots in the bootloader (RGB-test with some data on the device, SPL, the SD card, ...) just fine but the RUU doesn't find it.
I'm trying to flash it from a Windows XP machine - is there anything I have to take care of before I can flash it?
Or is there a real step-by-step manual for total dummies (I've flashed my HTC Diamond several times before without problems and have got no clue, why the PC won't find my Mozart).
The update process cancels with a CONNECTION ERROR [260].
will the hspa work on it from the tmobile usa after flashing this rom???
Invalid vender id
I have
INVALID VENDER ID
T-Mobile
Is there already a solution?
THX
nice greetings
Do you have the German T-Mobile version?
Mine flashed without any problems (after solving the driver problem...).
I have T-Mobile Austria.
but that this should be the same, right?
Greetings
Well, I'm not exactly sure.
However, if you think about the update failing with a wrong VENDOR ID - I guess it makes a difference.
FrozenLord said:
Do you have the German T-Mobile version?
Mine flashed without any problems (after solving the driver problem...).
Click to expand...
Click to collapse
are there any big noticable changes after flashing the new rom?
or is it just a minor security/stability update?
Be careful when uninstalling TMO apps
ROM is working very good, more fluent than stock version 1.25 - no problems found yet.
Still noticed the same problems with the stock ROM after uninstalling TMO shipped apps. When I uninstall Navigon the BING Map "Search" and "get directions" is gone/does not work anymore. When I remove "mediencenter" and plug in the headphones the phone is neither accepting nor able of making calls. However reflashing solves the problem - but you can't get rid of those TMO apps without losing functionality.
cmxqu said:
ROM is working very good, more fluent than stock version 1.25 - no problems found yet.
Still noticed the same problems with the stock ROM after uninstalling TMO shipped apps. When I uninstall Navigon the BING Map "Search" and "get directions" is gone/does not work anymore. When I remove "mediencenter" and plug in the headphones the phone is neither accepting nor able of making calls. However reflashing solves the problem - but you can't get rid of those TMO apps without losing functionality.
Click to expand...
Click to collapse
Strange, i deleted all the default T-mobile stuff and everything works just fine..
I also have the german T-mobile Mozart 16GB because it isn't released in the netherlands yet. I uninstalled all the programs Tmo ships. directions work just fine, very strange
hi
hi bro.. i have a question, first.
1- How to flash this ROM in my HTC 7 MOZART?
2- What news have this ROM? it is possible that my phone is blocked trying to flash this rom?
3- What fix this ROM in my cellphone?
thanks bro...
fabrifox said:
hi bro.. i have a question, first.
1- How to flash this ROM in my HTC 7 MOZART?
2- What news have this ROM? it is possible that my phone is blocked trying to flash this rom?
3- What fix this ROM in my cellphone?
thanks bro...
Click to expand...
Click to collapse
According to some other sites (just google the version number), this rom ships out with new devices. So no, it should not get you blocked, as it's a legit update.
Flashing is fairly easy: Backup everything you can, start you Mozart in Bootloader mode (pressing volume down while powering it on), plug it into your PC via USB, install the drivers if needed (done by installing Active Sync in XP, Windows Vista and newer should automatically find the needed drivers), start the updater and follow the instructions.
There is no official changelog, but several people think that the animations are smoother, the touchscreen reacts faster, ...
Seeing that there is no official changelog and the only thing we can do is assume what could have changed, I think there's no sense in discussing this. Especially since you can find several threads in other forums that discuss the changes in various lengths...
I haven't noticed any new problems after the update, so I guess it's at least as good as the previous version.
But this are just my thoughts
hi
FrozenLord said:
According to some other sites (just google the version number), this rom ships out with new devices. So no, it should not get you blocked, as it's a legit update.
Flashing is fairly easy: Backup everything you can, start you Mozart in Bootloader mode (pressing volume down while powering it on), plug it into your PC via USB, install the drivers if needed (done by installing Active Sync in XP, Windows Vista and newer should automatically find the needed drivers), start the updater and follow the instructions.
There is no official changelog, but several people think that the animations are smoother, the touchscreen reacts faster, ...
Seeing that there is no official changelog and the only thing we can do is assume what could have changed, I think there's no sense in discussing this. Especially since you can find several threads in other forums that discuss the changes in various lengths...
I haven't noticed any new problems after the update, so I guess it's at least as good as the previous version.
But this are just my thoughts
Click to expand...
Click to collapse
Thank you so much!!! Ure a bad man =) i try to flash and later i said ok....
if i have a german t-mobile device, do I have to flash my mozart at first? Or can _I just install the new firmware without doing anything before??
edit: and is this version newer or this one: [ROM]RUU_Mozart_HTC_Europe_1.28.401.04_5.52.09.16_22.33 a.50_RELEASE
am I able to install both on my german tmobile mozart?
WinUser009 said:
if i have a german t-mobile device, do I have to flash my mozart at first? Or can _I just install the new firmware without doing anything before??
edit: and is this version newer or this one: [ROM]RUU_Mozart_HTC_Europe_1.28.401.04_5.52.09.16_22.33 a.50_RELEASE
am I able to install both on my german tmobile mozart?
Click to expand...
Click to collapse
No you can't flash the HTC_Europe version, only the TMO_DE version.
TMO_DE stands for T-mobile Germany
HTC_Europe is the generic software for the non branded devices.
Doesn't make any difference except the useless apps you get from t-mobile.
But after you delete them everything is the same.
And for the record, You don't have to flash your phone at first... Installing new firmware IS flashing. so you just run the RUU and make sure zune is running and phone is running, not in stand-by.
And be sure to backup everything you want to keep, haven't flashed my mozart, but i think you lose all data when you flash it.
Sure someone else knows that.
Aerox912 said:
No you can't flash the HTC_Europe version, only the TMO_DE version.
TMO_DE stands for T-mobile Germany
HTC_Europe is the generic software for the non branded devices.
Doesn't make any difference except the useless apps you get from t-mobile.
But after you delete them everything is the same.
And for the record, You don't have to flash your phone at first... Installing new firmware IS flashing. so you just run the RUU and make sure zune is running and phone is running, not in stand-by.
And be sure to backup everything you want to keep, haven't flashed my mozart, but i think you lose all data when you flash it.
Sure someone else knows that.
Click to expand...
Click to collapse
Thanks for the answer!
I thought that I have to set the mozart in the bootloader mode, in order to flash. When I was telling it "flashing" I meant something like hspl like we had to do on the HD2, befor we could flash custom roms or htc roms on it.
edit: and is there any possibility to go back to: 1.25.2250.5 firmware (now installed on my phone)?
and last question this 1.28 version will not breake my warranty, right? It'S a normal t-mobile rom, isn't it?
Guys, I'm not sure I fully understand everything so far.
I basically have a Telstra (Australian) HTC 7 Mozart. From what I gather, I cannot flash this on my device until it is unbranded, is that correct?
hello to everyone.
I have a htc t-mobile mozart Germany but I live in Venezuela and I can assure you and proven DepNet.com for both 1.25 and 1.28
posted on this page to a friend Football and run to perfection
and also I can tell you that my phone came with 1.25 and the 1.28 istale him but then return to 1.25 and all is well.
and the echo for several times trying to place the Spanish language and if anyone can help I'd appreciate it forever
@ WinUser009:
HSPL was needed because we used to flash cooked (and therefore custom-made) ROMs, which were not signed by HTC or any other company able to sign them. These ROMs are unmodified and signed, which is why you can flash them without flashing any unlocked HSPL first.
Bootloader-mode is just a different mode to boot in - it does not need any changes to your phone!
I don't think that there is a possibility to go back to 1.25.xxx - but honestly why would you want to? But I have to admit that I have not yet tried it...
As to the warranty: that's a complicated matter...
This firmware is not official and my new Mozart (I got a new one after sending it in) still had the 1.25 firmware installed (someone posted that newer phones should ship with the 1.28). So there might be a person detecting that you flashed it yourself, if they keep sending out new phones with 1.25 preinstalled.
However, the phone I turned in had 1.28 flashed and I have not received any complaints when I sent it in for a replacement. So I guess it is up to your shop but it should not pose any problems!
@ameel
You can flash as soon as one of these things happen:
- custom roms are released that don't check for the carrier information
- you unlock your phone (somehow)
- Telstra releases an update
But as of now you can't flash these T-Mobile roms on your Mozart.
@minino405
Sorry, but I didn't understand your post. What did you try to tell / ask us?
I hope I could help you with some of your questions

Debranding

Today I bought a Wildfire that has a branded OS by Telstra, I don't like a lot of the extras and startup screens and junk that is there. So I rooted the phone and flashed it with that popular Puzzlerom but I didn't really like it so I recovered back to my original from a backup. Is there anyway for me to flash it with the latest official ROM from HTC or get rid of the branding on my current Telstra ROM?
So I've done some searching, I found some references to getting the official HTC ROM from Shipped-ROMS. I couldn't find anything on the website, but when looking at the website index directories I found the Buzz folder but I don't know which HTC ROM to download. I want the latest one and I'm not really sure what the difference in versions numbers are as there are so many and all of them are pre-dated before the 2.2 release and I don't know if there is a difference in Radios and I don't want to upgrade to the latest version and have my phone not picking up reception and not being able to possibly revert it as I don't know if 2.2 is rootable.
I'm also unsure If I can simply run the official WWE .exe if my phone is rooted without some kind of corruption.
If somebody could give me a quick guide or point me to a thread which could help.
In a nut shell my situation is:
Telstra Branded Firmware Version: 2.1-update1.
Software number: 1.21.841.3
Kernal: 2.6.28-543e5f81
Rooted
Need to unbrand and get latest official HTC rom.
I too am interested in a fix for this?
cheers
Turns out I'm actually really stupid.
In the Development subforum people post the official ROM and safe .zip versions of it too -_-.
Debrand Telstra Wildfire
Am curious about doing this the Telstra firmware is quite annoying not to mention god knows when Android 2.2 will become available. I have tried all the RUU update i can find none work, get either error 130 or 140... main problem seems to be the model id of my phone is incorrect. I currently have 2.1-update1, baseband 13.55.55.24H_3.35.20.10, software number 1.30.841.1. Anyone got any ideas how to get rid of the Telstra firmware in favour of the standard HTC?
chrisj9898 said:
Am curious about doing this the Telstra firmware is quite annoying not to mention god knows when Android 2.2 will become available. I have tried all the RUU update i can find none work, get either error 130 or 140... main problem seems to be the model id of my phone is incorrect. I currently have 2.1-update1, baseband 13.55.55.24H_3.35.20.10, software number 1.30.841.1. Anyone got any ideas how to get rid of the Telstra firmware in favour of the standard HTC?
Click to expand...
Click to collapse
http://www.shipped-roms.com/downloa...5.55.24H_3.35.20.10_release_160191_signed.exe
have you tried this one?
Its Froyo by the way
Or browse in here:
http://www.shipped-roms.com/index.php?category=windows mobile&model=Buzz
I bought a Telstra Wildfire before Xmas and used the follwoing procedure to debrand it to a stock HTC ROM.
The Wildfire came with ROM ver 1.21. I upgraded it to 1.37. See http://shipped-roms.com/shipped/Buzz/ for a list of the HTC roms. I used http://shipped-roms.com/shipped/Buz...3.55.24H_3.35.19.25_release_151892_signed.exe as it is the most recent one that can still be rooted. The next one is Froyo (http://shipped-roms.com/shipped/Buz...5.55.24H_3.35.20.10_release_160191_signed.exe) however if you flash this one you will not be able to root it unless someone works out how to at some time in the future.
Firstly you will need to root the phone using Unrevoked (http://unrevoked.com/#wildfire).
Secondly create a goldcard (http://android.modaco.com/content/software/308798/pc-application-goldcardtool/)
The goldcard is necessary as, even though the phone has been rooted, the upgrade program will note that the CID in the phone is for Telstra and you are installing a non-Telstra ROM. You will get an error without the goldcard. The goldcard will override this detection and allow stock HTC and custom ROMS to be installed on your phone. Once you have installed the new stock HTC ROM using the goldcard, the goldcard will not be required for future stock ROM upgrades. It may not be required for upgrades to custom ROMS either but someone else may be able to verify this as I have not tried them.
Some people have had trouble getting the goldcard to work using thrid party SD cards. If you use the one that came with the phone you will not have trouble. The only problem with this is, as part of the unrevoked rooting, you will probably have done an nandroid backup which will dump backup files on the card so that you can restore your original ROM if you wish. I skipped this backup as shippedroms has the standard Tesltra 1.21 rom on their site (http://shipped-roms.com/shipped/Buz...45.55.24_3.35.15.31_release_138758_signed.exe) so that you can restore the phone to standard if required.
Thirdly, install the stock ROM (http://shipped-roms.com/shipped/Buz...3.55.24H_3.35.19.25_release_151892_signed.exe) with the goldcard in the phone.
This will unroot your phone but you can re-root it again as you did in the first step above.
You can upgrade to Froyo but read the posts under the Wildfire Android Development section of these forums so that you understand the disadvantages of doing so. Many have been to quick to upgarde and have been caught out!
I am going to wait until unrevoked can root Froyo before I install it.
Has anyone tested that the phone can still communicate at 850mhz after running this process?
The phone I ran this on still works at 2100mhz, but lost 850mhz, which more renders a Telstra wildfire useless (Unless you're a city dweller with ample 2100 coverage)
Is it possible that the radio firmware flashed in with the european image (which is of course designed for the 900/2100 radio) does not work properly with the hardwre in this phone? I've done a lot of searching on this subject and have come up completely empty!
Hey guys,
I bought Eclair Wildfire Telstra-branded only weeks ago, straight away rooted it and installed Sunaabh ROM (a stable, stock-like Froyo ROM). Apart from Telstra splash screen (unable to remove because we have S-On) it is debranded of course. I dunno what you mean about the radio stuff, but I live in faaaaarrrr west Sydney (Wallacia) which is pretty much country and I get 3G. Is that full NextG speed...? I really don't know!
Do NOT install official 2.2 update! It will remove root and install the new, currently unrootable HBOOT!
EDIT: What is this goldcard nonsense? Do your research! Unrevoked3 installs the Clockworkmod recovery and you can then flash ANYTHING.
Sent from my HTC Wildfire using Tapatalk
I think by now I can say there's 2 ways of debranding a Wildfire A3335:
What I did (don't do this anyone else!):
* Run a stock RUU. Fully fully debrands it (No telstra logos anywhere). Also replaces the radio firmware with an eurpoean version and destroys your phone's rural (850mhz) coverage
What you did (and what I should have done):
* Just replace the ROM. Leave the Radio firmware in place: End result: You still have a phone that works on 850mhz but you've also got an annoying telstra boot screen, and there's not a damn thing that can be done about it until S-OFF is figured out for Wildfire.
jonusc said:
Hey guys,
EDIT: What is this goldcard nonsense? Do your research! Unrevoked3 installs the Clockworkmod recovery and you can then flash ANYTHING.
Click to expand...
Click to collapse
The Goldcard is for people who choose to run the HTC RUU upgrade process, as described by lemming999. As you just reflashed your ROM, it is expected that you would not require a Goldcard.
As per my post above. *** Do not run this unless you really don't care about your rural coverage ***
Ok - I've posted a solution for getting 850MHz 3G back again for anyone silly enough to do what I did. Read here: http://forum.xda-developers.com/showthread.php?p=11559059#post11559059
inaxeon said:
Ok - I've posted a solution for getting 850MHz 3G back again for anyone silly enough to do what I did. Read here: http://forum.xda-developers.com/showthread.php?p=11559059#post11559059
Click to expand...
Click to collapse
Is it possible that you have S-OFF as a result of flashing an RUU? I assume no, because there are no RUU packages which have an "Engineering" SPL included... right?
What about SIMLOCK? True debranding should remove the CID if you can share whether you can use non Telstra SIM cards now, I may pursue the Goldcard/RUU process myself!
I don't have S-OFF at the end of this. But the HTC RUU does have the ability by some means of magic to COMPLETELY debrand the phone (including the first boot screen) and ruin your radio in the process.
So now that I've managed to restore the Telstra radio, I have have a 100% unbranded, fully working A3335 while most people tend to be stuck with the telstra logo at the SPL.
If S-OFF was obtainable on wildfire I think this process would be a lot easier but I got the desired result in the end. Reflashing the radio is pretty dodgy. I've avoid it as if it goes wrong. Your phone is a doorstop.
jonusc said:
What about SIMLOCK? True debranding should remove the CID if you can share whether you can use non Telstra SIM cards now, I may pursue the Goldcard/RUU process myself!
Click to expand...
Click to collapse
Yes non telstra SIM cards work. Although, I bought the phone unlocked so I don't know how this came about. as for the CID, it may remain, it may not. I don't know how to tell. There's a fairly good chance it was nuked when I flashed with the Euro RUU.
Fair enough, thanks for the detail. I'm not fussed on SIMLOCK (no vodafone coverage out here anyway), was just curious.
In regards to s-off, it is determined by SPL which AFAIK every RUU has. But again, every PUBLIC RUU would have nandlock. But there are some Wildfire users here who do have s-off, and say they don't remember how they did it (they never noticed until down the track). Odd.
Sent from my HTC Wildfire using Tapatalk

Categories

Resources