Hey guys,
I have looked around here and mainly found peoples topics for the Galaxy S i9000T who are from a different country, need different firmware and have differently branded phones, hence this topic:
I have purchased a Telstra branded (AUSTRALIAN) Samsung Galaxy S.
BASEBAND VERS: I9000TDVJH3
KERNEL VERS: 2.6.29
BUILD #: ECLAIR.DVJH3
----------
From simple browsing I have determine 'TEL' or 'DV' just means TELSTRA (and T can also mean this). If looking at 'J' by itself it can be interpreted as OCTOBER 2010 (when i got the phone), but not sure what H3 is....or if it is read as JH3..
My plan is to jump onto a nice compatable version of Froyo 2.2, however I have NO IDEA which is the best and closest firmware to download and in case of any stuff-ups or compatability issues, if i need to claim my phone under warranty, I want to be able to flash back to stock firmware, which is this Telstra JH3 crap, and have no idea where I can find that.
My biggest gripe is nopt being able to have the FREEDOM to remove/uninstall/move certain LOCKED apps despite trying with various android apps and while i'm rooting/flashing, I thought I might as well get 2.2 since the "proposed" release date in Australia for it, and probably likely release by Telstra will be in December, or so I am told...screw that.
Can someone help me and direct me to the most appropriate version of firmware to download and, if available, the original stock firmware (if it has been replicated by anyone with the same phone as me?)
Thanks
RoOSTA
I've PM'd some Aussies to get attention to the post as i have nowhere else to turn to!
currently there are no safe Froyo 2.2 yet
even the original release in Europe got recalled, wait until mid November, then we might finally see some progress
for now just iron out whatever is bugging you with the current fixes, and live happy until Froyo comes out
is that I9000T a 900 band model or 850 band model ?
AllGamer said:
currently there are no safe Froyo 2.2 yet
even the original release in Europe got recalled, wait until mid November, then we might finally see some progress
for now just iron out whatever is bugging you with the current fixes, and live happy until Froyo comes out
is that I9000T a 900 band model or 850 band model ?
Click to expand...
Click to collapse
The Telstra I9000T is a 2100/850 Mhz model.
Yeah, OK...I'll wait til mid November, only a couple of weeks away...
Until then, what can I do to get the best/accurate/most reliable 2.1 (UNBRANDED) that will still work 100% on the 2100/850MHz bands? I want to be able to delete ALL the crap that is apparently "system locked" apps from the phone...
RoOSTA
i have i9000t latin america versión
and i have made this flash "[HOWTO] Froyo FW I9000XXJPM: Upgrade via Odin, Root, Recovery 2e, Lagfix!"
with a unlocked csc from canada
first of all I made a backup with the rom manager, because i cannot find anywhere the galaxy s firmware of my t model
maybe you can do the same
so whats the optus ones? just i9000? funnily enough im on jg3 with optus.. where as the op is on jh3.. my phone was also delivered in mid oct 2010.
So maybe I'll just try rooting the phone to de-brand it (keeping on 2.1) then when a stable official froyo 2.2 comes out, hopefully MID NOV, just update to that?
RoOSTA
roosta said:
So maybe I'll just try rooting the phone to de-brand it (keeping on 2.1) then when a stable official froyo 2.2 comes out, hopefully MID NOV, just update to that?
RoOSTA
Click to expand...
Click to collapse
Rooted the phone using auto method from the tutorial on these boards with ease, installed Titanium Backup which downloaded the latest or most compatable busybox (1.16 for me). I have managed to delete some "locked" apps, but a lot of Telstra's BIGPOND apps remain (downloads, movies, sport, etc) - they are much harder to find when browsing the list appLIST in TBackup - I jsut got the free version, but impressed with how much easier it has been to customise even still, as a branded phone.
RoOSTA
@roosta...im a noob, plz can u tellme the step to step guide i soo wanna get rid of telstra apps and i wanna completely debrand the telstra galaxy s phone without installing any lag fixs like voodoo etc, i just want to instal the original eclairs or froyo from samsung for its galaxy s i9000, but im not sure how to go about because i have the 850mhz next g galaxy s from telstra. Can you help me , thanks in advance
Hi mate, as the reply I made above states, i used the galaxy S "root" tutorial,. i havent debranded hthe phone, but i have been granted rights or access to delete specific apps I dont want, so follow that. I won't FULLY debrand the phone only because I havent got the telstra stock firmware to download and REINSTATE at a later date (if i needed to for warranty purposes)
RoOSTA
@roosta, i wud really appreciate if u cud post the link, i cannot find the thread u mentioned in your reply. and secondly any idea when telstra wud be releasing 2.2 for sgs. cheers
tyrael64 said:
i have i9000t latin america versión
and i have made this flash "[HOWTO] Froyo FW I9000XXJPM: Upgrade via Odin, Root, Recovery 2e, Lagfix!"
with a unlocked csc from canada
first of all I made a backup with the rom manager, because i cannot find anywhere the galaxy s firmware of my t model
maybe you can do the same
Click to expand...
Click to collapse
Hi mate,
Is there any chance you can upload your stock rom, I stupidly flashed my i9000t without fully understanding the 850mhz network and now I am stuck with a custom rom and no way to access the nextG network.
If there is a way and I just missed something, please let me know.
Kindest regards,
All you need to do is root the phone which you did, and then get hold of Titanium Backup. Use that to uninstall the junk that Telstra pre-installed. But before you do anything use Titanium to make a full Backup just in case. From what I gather your phone is exactly the same as the American AT&T captivate so whatever roms/fixes they use you can use on your phone. If you notice a lot if not all phones from AT&T usa work fine on telstra as they both use 850mhz (NexG rebranding) while the rest of the world like Optus/voda/whoever uses 900mhz. 850mhz is actualy better as it penetrates walls and buildings better but problem is that only 3 Telcos that i know use it is AT&T, Vodafone NZ and Telstra so they can be expensive for data. But on a better note you can use your phone on any network as it also has 2100mhz(very congested) 3G too.
Always willing to help out a fellow aussie here you go mate
h ttp://forums.whirlpool.net.au/forum-replies.cfm?t=1541361
So 2.2 out for Optus, but STILL nothing yet for Tesltra for the JH3 firmware and 2100/850 bandwiths!?!
That's ridiculous...
and guys, for stock 2.1 eclair Telstra i9000T firmwares and CSC go here:
http://forums.whirlpool.net.au/archive/1541361
RoOSTA
Hey Roost,
Just wanted to check in and see whether you had any luck mate? As far as the GTalk thing goes I had absolutely no idea about that, but sounds like your only choice here is to flash back to stock Telstra 2.1 and then redo your modifications and reflash to your custom ROM.
I agree with you completely in that the delay for Telstra updates is ridiculous, but this has always been the case. Even right back to WinMo 6.5 on the TP2 and TD2, they've always been three or four months behind the trend. To best of my knowledge there's still no news on Froyo yet, which is just ****ful.
I'll keep checking your post to see if you turn anything up. Hopefully you do and it's manageable. Good luck mate.
Justin
Hey all,
Just updating: As per another thread on this board - Telecom NZ have released Froyo 2.2 available via kies. Using registry, i spoofed Kies into thinking my phone was i9000T from NZ, so have since updated to 2.2 wiuth no issues;
For me, no lag fix needed, swype works perfectly, all gps/maps work fine with accuracy and 850 band fully functional. I'd also recommend doing this ahead of Tesltra AU since i've gone from about 15+ useless LOCKED system banded apps to TWO on Telecom NZ; one being internet and the other for 'account status', so very happy with the recent update...
RoOSTA
roosta said:
Hey all,
Just updating: As per another thread on this board - Telecom NZ have released Froyo 2.2 available via kies. Using registry, i spoofed Kies into thinking my phone was i9000T from NZ, so have since updated to 2.2 wiuth no issues;
For me, no lag fix needed, swype works perfectly, all gps/maps work fine with accuracy and 850 band fully functional. I'd also recommend doing this ahead of Tesltra AU since i've gone from about 15+ useless LOCKED system banded apps to TWO on Telecom NZ; one being internet and the other for 'account status', so very happy with the recent update...
RoOSTA
Click to expand...
Click to collapse
I think TNZ have pulled their 2.2, at least that's the last update I read a few days ago.
I've got an I9000T as well, and am on Telstra. I've flashed Docs V4 JPU ROM and it's working great on the 850 band.
So it looks like the JPU CSC does support the NextG frequencies
Do you think you might be able to list some of the useless telstra branded apps you removed? im having trouble knowing whats what the way its itemised and named in Titanium Backup.
auldar could you link to the ROM you are using at please.
I've been searching threads, but alot of them are several months old, can someone post an updated tutorial for rooting a 2.2 Bell Vibrant? Some of the older methods probably wouldn't work and I am starting to pull my hair out searching! Thanks for the help
I'm pretty sure a Bell Vibrant is a I9000?
It is not the same as our T959 though
yes I9000 the superoneclick i believe there is 9000 version that will work or find the specific update file and place on the int sd card
I believe it is an i9000m, which means there is a small difference from the USA phones, thus most of the tutorials won't work for it
bumping for more help!
Did you ever made it to root the i9000M Bell with 2.2.....I am now trying to do it too. Need some help. Thanks
Did you try SuperOneClick?
Hi all,
I have recently purchased the Samsung Galaxy S II 4G on the Telstra Network here in Australia. I've searched this forum completely (well to the best of my ability) and cannot find the info that I want.
I would like to get rid of the Telstra bloatware on the phone and install a custom rom from this site. I cannot find anything to do with this particular model and don't want to stuff this up so any help here would be appreciated.
About Phone
Model Number GT-I19210T
Android Version
2.3.6
Baseband version
I9210TDVLD1
Kernal version
2.6.35.11-I9210TDVLD1-CL1087044
Build Number
GINGERBREAD.DVLD1
Thanks in advance for any info on this little baby
I would not like to lose the 4G network if updating not sure if anyone here has done any testing on this model. Its not been out long and I've only had it for a week.
cheers
you best go to this forum and follow it, since its just released and the cpu is different from ours, 1.5 dual core,snap dragon i think
forums.whirlpool.net.au/archive/1868148
Doubt you'll find much (any ?) custom firmware for this phone. Only sold by one telco here, only works (as intended) on one network. Not a lot of incentive for devs (most of whom don't live in AU) to develop for it.
Hi guys just recieved my s4 today in the uk.
Its locked 2 three i dont like it branded.
can anyone tell me which firmware i should flash to
sim free version uk
And the newest 1 plz
Tbh don't bother unbranding it, if you want updates quick then your better off staying with the 3 firmware you have already got installed.
Updates on Simfree are painfully slow, compared to the networks we are still waiting for the update that 3 got a month ago.
If you still want to go ahead and unbrand your S4 then there are guides on here to help you do it, first of all though before you can install a unbranded firmware, I think you gonna need to have to unlock it first before you can do anything else.
yea thats fine i know how to do all of that
i just would like to know which firmware i need for the UK simfree i9505 version just so i know im flashing the right 1
can anyone guide me to the right 1.
theres so many im confused
This one
http://www.hotfile.com/dl/209462137/82c78b1/I9505XXUAMDM_I9505OXXAMDB_BTU.zip.html
But you already have the more up to date one on your phone already.
Join us other UK peeps here
http://forum.xda-developers.com/showthread.php?t=2191766&page=240
Ixon2001 that file is rather huge lol.
is that defo the latest unbranded firmware for uk sim free
Yip that the latest and yes they huge files for the S4.
ok cheers much appreciated
Hi,
I am going to purchase a 2nd hand, but like new Z3 compact.
Its locked to EE and is EE branded.
I believe, if i grab the Original Lollipop software and flash it, then ill remove the branding no problem?? Can anyone confirm?
And is there a free solution for the carrier lock..??
Thanks in advance.
FYI - I am experienced with flashing and rooting etc, but with Samsung Galaxy S3 and OnePlus one. This is the first Sony phone ive ever had.
Cheers
G
This thread is as good a place as any to start.
If you don't want to root just follow the link in that thread for stock firmwares, many of which are generic, ie they are "unbranded".
As for carrier unlock you will probably have to go with one of the many paid for services out there, but i may be wrong....