Related
Hi,
I send my first W2003SE application.
This is a free application (it's a beta version written in c#, and requires .NET CF) and is capable to detect a change in the phone owner identity via the next comprobations:
- The user can be configure a list of preferred SIM Cards
If the inserted SIM card is not any of the owner preferred sims the application send's a sms to a configured phone (including a configured text and the SIM identifier of the inserted card)
[Obviously, the application sends the message without prompt for user msessage send confirmation and not stores the sms at the outlook tray's]
[obviously, if the new user inserted sim is a prepay sim and the credit was 0, none sms is sended]
Additionally, the application show's (if configured) a balloon notification.
- The application test (if configured) the value of the Owner identity and if changed sends a sms and / or shows a notification...
Please, test and send me your comments...
regards
Also tested it for WM05?
Nadavi :?:
Hi, sounds similar to another program on this forum. What happens if the user performs a hard reset? In any event I will give it a go soon.
frigit said:
Hi, sounds similar to another program on this forum. What happens if the user performs a hard reset? In any event I will give it a go soon.
Click to expand...
Click to collapse
hello,
1) i have showed 2 threads in this forum about this problem.
one works with owner data but no with sim data, and another works with the sim, but the user is obly to store a special number at the sim ownered numbers list (i don't have tested any).
this application works with owner user data and stores the valid sim identifiers in a configuration file.
2) in my opinion, the correct usage is:
a) install the application
b) c9nfigure settings
c) copy the application and the configuration file at the rom
in this case, a hard reset is not a problem, ok ?
regards
frigit said:
Also tested it for WM05?
Click to expand...
Click to collapse
sorry,
i have a qtek s100 with w2003se...
please, test in w2005 if you have... and send me your comments...
thank's
Seems to be working on my xda2i - no slow down of unit and no lock-ups tho only second day of use.
Thank you Bartito
Sorry but doesn't work on my MDA Vario.
First I had to install OpenNet Cab and after that I got an error that it couldn't load some NotifyIcon.
I was in a hurry so I didn't check that good, I already uninstalled the program but I will sure will try a new update, the idea is real good
bartito said:
frigit said:
Hi, sounds similar to another program on this forum. What happens if the user performs a hard reset? In any event I will give it a go soon.
Click to expand...
Click to collapse
hello,
1) i have showed 2 threads in this forum about this problem.
one works with owner data but no with sim data, and another works with the sim, but the user is obly to store a special number at the sim ownered numbers list (i don't have tested any).
this application works with owner user data and stores the valid sim identifiers in a configuration file.
2) in my opinion, the correct usage is:
a) install the application
b) c9nfigure settings
c) copy the application and the configuration file at the rom
in this case, a hard reset is not a problem, ok ?
regards
Click to expand...
Click to collapse
Bartitio, could you please clarify what is required in point (c)? Where exactly do I copy the files too? I also have a Magician. Thanks Paul
c) copy the application and the configuration file at the rom
in this case, a hard reset is not a problem, ok ?
regards[/quote]
Bartitio, could you please clarify what is required in point (c)? Where exactly do I copy the files too? I also have a Magician. Thanks Paul[/quote]
Hi,
I have read more threads in this forum about the mode to make your owner rom.
Tried the software but got the following error:
"An unexpected error has occurred in SecurePocketPhone.exe
Select Quit and then restart the program, or select Details for more information"
Upon selecting details the following error message occurs:
"SecurePocketPhone.exe
TypeLoadException
Could not load type
OpenNETCF.windows.forms.notifyicon
from assembley
OpenNETCF.Windows.Forms,
Version=1.4.50804.0, Culture=neutral,
Publickey Token=30C767B29D52D6
Any ideas?? I have the opennetcf file loaded
frigit said:
Tried the software but got the following error:
"An unexpected error has occurred in SecurePocketPhone.exe
Select Quit and then restart the program, or select Details for more information"
Upon selecting details the following error message occurs:
"SecurePocketPhone.exe
TypeLoadException
Could not load type
OpenNETCF.windows.forms.notifyicon
from assembley
OpenNETCF.Windows.Forms,
Version=1.4.50804.0, Culture=neutral,
Publickey Token=30C767B29D52D6
Any ideas?? I have the opennetcf file loaded
Click to expand...
Click to collapse
I have updated the cab file with a newly version that don't need the OpenNetCF.NotifyIcon class.
Thank's
bartito said:
I have updated the cab file with a newly version that don't need the OpenNetCF.NotifyIcon class.
Click to expand...
Click to collapse
Sorry, but this doesn't work on my MDA Vario with latest Qtek Rom and OpenNET CF installed.
But maybe my problem is that I use WM5 and not WM2003
molski said:
bartito said:
I have updated the cab file with a newly version that don't need the OpenNetCF.NotifyIcon class.
Click to expand...
Click to collapse
Sorry, but this doesn't work on my MDA Vario with latest Qtek Rom and OpenNET CF installed.
But maybe my problem is that I use WM5 and not WM2003
Click to expand...
Click to collapse
Ahhh!
It's possible.
I have tested only in w2003se.
I don't have a w2005 pocket...
sorry
That's too bad....for now!
I will stay and follow this topic, would love to see this work on my Wizard.
By the way, does it stay freeware, or are you planning something like a license key, or maybe something like a free donation?
molski said:
By the way, does it stay freeware, or are you planning something like a license key, or maybe something like a free donation?
Click to expand...
Click to collapse
This project was freeware for every...
Hi Bartito, not sure if you updated your first attachment, but I downloaded it again and got the same error.
frigit said:
Hi Bartito, not sure if you updated your first attachment, but I downloaded it again and got the same error.
Click to expand...
Click to collapse
Please,
install the OpenNET CF assembly libraries (follow this link: http://www.opennetcf.org/fget.asp?file=SDF14CABs.zip&dir=/bin)
Thanks
Hi Bartito!
Thank you soooooo much for this App!
I had the same problems as frigit with the same error-message and I thought I had the right .NET CF but it didn't work. Now it is workign perfectly. Thanx for the link!
Bartito for President!!!
inquartata said:
Bartito for President!!!
Click to expand...
Click to collapse
No, no... i idore my anonymity.
please, send me any comment or bug.
thank's
inquartata said:
Hi Bartito!
Thank you soooooo much for this App!
I had the same problems as frigit with the same error-message and I thought I had the right .NET CF but it didn't work. Now it is workign perfectly. Thanx for the link!
Click to expand...
Click to collapse
Do you have a Wizard (with WM5), or some device with WM2003?
Tnx!
Blank screen of writing a new text message on 818pro.
Is there anyone can help? There will have no problem after hard reset, it seems one of the programs causes this problem. But does anyone know the reason? Is it memory insufficient?
scott4 said:
Blank screen of writing a new text message on 818pro.
Is there anyone can help? There will have no problem after hard reset, it seems one of the programs causes this problem. But does anyone know the reason? Is it memory insufficient?
Click to expand...
Click to collapse
I have absolutely not clue what you want here. Could you rephrase your problem again and explain it a bit more clearly please ?
Spatzm said:
I have absolutely not clue what you want here. Could you rephrase your problem again and explain it a bit more clearly please ?
Click to expand...
Click to collapse
when I press "New" button in order to write a new SMS (text message) of my 818pro. The content of the message is just a blank screen, I can do nothing with it except closing it. This also affects on MMS and Email.
Is there anything corrupted?
scott4 said:
Is there anything corrupted?
Click to expand...
Click to collapse
This reminds me of something yes. Could you please do these things and reply with answers to my questions ?
a) How much space do you have remaining on your device (how much free ram) ?
b) Go to Start -> Settings -> Installed Software or hows it called (the place where you see what software is installed) and tell me if the list is still there. Do you see your installed programms in the list or is it empty ?
http://www.choiceway.com/content/gsi/ppc_rem9.gif
c) Can you uninstall or install new software ? Please test with some small CAB file on your device.
is Arabizer installed on ur deivce?!when im using unofficial pdamobiz roms on my prophet,after installing arabizer,the new message window becomes exactly as u said!after disbaling the arabizer it worked again.i hope this helps.
Spatzm said:
This reminds me of something yes. Could you please do these things and reply with answers to my questions ?
a) How much space do you have remaining on your device (how much free ram) ?
b) Go to Start -> Settings -> Installed Software or hows it called (the place where you see what software is installed) and tell me if the list is still there. Do you see your installed programms in the list or is it empty ?
http://www.choiceway.com/content/gsi/ppc_rem9.gif
c) Can you uninstall or install new software ? Please test with some small CAB file on your device.
Click to expand...
Click to collapse
Hello Spatzm,
Thanks for your reply.
a) 23.85MB RAM left
b) ce-star suite v2.8 r2a
c) yes, i can uninstall and install new software.
--> this problem exists right after I sync the data and then press soft reset button. Is this the point? because whenever I press reset button, the SMS I wrote disappear even my pda has been just done a hardreset.
niloofari said:
is Arabizer installed on ur deivce?!when im using unofficial pdamobiz roms on my prophet,after installing arabizer,the new message window becomes exactly as u said!after disbaling the arabizer it worked again.i hope this helps.
Click to expand...
Click to collapse
I dun think "Arabizer" is installed. Is it a program? or something about "Arab"?
Anyway, I can't find it from "Remove program". Tks.
scott4 said:
I dun think "Arabizer" is installed. Is it a program? or something about "Arab"?
Anyway, I can't find it from "Remove program". Tks.
Click to expand...
Click to collapse
I hardreset my 818pro again, but never press the soft reset button, so far ---- OK!!! Why the reset button cause such problem on serveral version of ROM?
AKU2.3.1, AKU3.2, AKU3.3
Arabizer is a program which enables your device to show arabic fonts.when i install it on official roms,there is no problem but when i install it on pdamobiz roms then i have a blank new sms window.as i said,after disbaling the arabizer it works again.hope it helps.
niloofari said:
Arabizer is a program which enables your device to show arabic fonts.when i install it on official roms,there is no problem but when i install it on pdamobiz roms then i have a blank new sms window.as i said,after disbaling the arabizer it works again.hope it helps.
Click to expand...
Click to collapse
There is no such program installed on my 818pro.
I am using AKU3.3 clean rom.
scott4 said:
There is no such program installed on my 818pro.
I am using AKU3.3 clean rom.
Click to expand...
Click to collapse
Probably a ROM issue then. If you recall my reply above with the few questions. I initially had in mind that you might run into the security stuff (certification messup) issue but this is not the case.
scott4 said:
I hardreset my 818pro again, but never press the soft reset button, so far ---- OK!!! Why the reset button cause such problem on serveral version of ROM?
AKU2.3.1, AKU3.2, AKU3.3
Click to expand...
Click to collapse
You have the answer right there. The registry is only written back periodically. After doing any changes you should not quickly follow up with a soft reset otherwise any new information will be lost. At the very least switch off and on again before doing a soft reset. This is not a ROM fault it is simply that writes to the registry are not carried out immediately.
If you want full details see here:
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=898&more=1&c=1&tb=1&pb=1
Mike
mikechannon said:
You have the answer right there. The registry is only written back periodically. After doing any changes you should not quickly follow up with a soft reset otherwise any new information will be lost. At the very least switch off and on again before doing a soft reset. This is not a ROM fault it is simply that writes to the registry are not carried out immediately.
If you want full details see here:
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=898&more=1&c=1&tb=1&pb=1
Mike
Click to expand...
Click to collapse
Hello Mike,
Thanks alot for your explaination. The data cannot be written immediately, so that should not press soft reset button right after a SMS (text msg) is written. This question is answered well.
However. My main problem is why the SMS writing page became blank and never recover until a hardreset? I had this problem after sync PIM and then pressed soft reset button.
scott4, nice to meet u Do u come from HK?
I have the same problem before...
At that time , I used AKU2.? (forget XD) and ce-star too!!!
After hard reset for about a week.....the problem will appear again= =
SO i always reset -> blank -> reset -> blank -> loop....
until I upgrade my 818pro to 2.3, ...
and I don't use ce-star again....since it always hang= =
firstly i use monster chinese...but i found that the font is very ugly.....
so at last , i don't use monster chinese anymore, I only copy mingliu font from my winXP, and edit the registry to let my 818pro can read chinese....
Also , I download the Chinese input method from monster website, but without using monster XDDD
I don't know it's the problem of AKU? or ce-star? or just i'm very lucky.......
I want to upgrade to AKU3.3 too!!! many people say that it's very fast when you compare 3.3 to 2.3.........i wanna try it~>< But now....I'm afraid the SMS blank problem will appear again= =XD
it's the problem of cestar, i used to have the same problem with cestar installed, after uninstall it the problem was gone
hey guys recently i Flashed to this rom in the link
http://forum.ppcgeeks.com/showthread.php?t=37237
and every time i text..and i do mean every time i get a message sent to me saying message delivered....funny thing is i have it turned on off in message options and it still happens... and here is what the text says exactly
From: System Administrator
Body: the message u sent has been delivered.
is there a registry edit to permanently disable this or a cab anyone might have..plz any help will do
anyone?....i see ppl viewing it any input at all?
and still no help...
I believe you have to set up your carrier info, or just use DCD's Carrier cab.
hope this helps
Kicken
Edit: Use this link to find carrier cabs
http://dcd1182.n715dp.com/index.php?dir=carriers/
Just use Schap's Adv Config.
Have searched the Diamond Forum extensively, but not found mention of this problem.
My Exchange E-Mail from WM6.1 refuses to download (or at least open) attachments. This happens with .doc .docx .pdf .xls .xlsx attachments. These attachments open without a problem, when I use another two e-mail accounts using imap, the problem only occurs when synchronising with my Exchange Server.
It looks as if the attachment is being downloaded, but it doesn't then open. I have posted this on the Vodafone Forum (post 50578 and update 135471), and one other person reported the same problem, but no solutions were forthcoming. I have just installed the latest ROM, without effect.
Any suggestions ?
Rom Version : 1.97.161.4 WW
Rom Date : 10/26/08
Radio version : 1.08.25.08
Protocol version 52.44.25.24U
Does tapping and holding on the attachment and hitting "Save as..." work?
If the above suggestion does not work then there could be an issues with your provider
Thanks for the suggestion but Save As does nothing.
If I tap the attachemnt, a green arrow appears next to it, and the "Downloading..." message appears at the bottom of the screen, but when it finishes, the Attachment reverts to a blank grey icon next to the filename, rather than the icon representing the application.
This leads me to believe the device downloads the attachment, but for some reason it is not being saved, or the linked program is not being invoked. In \Internal Storage\Inbox.mst29991181.1156583424\Mail Attachments, I can see several zero size *.att files
The provider Vodafone say this is not a widely reported problem, but at least one other User on their Forum has reported it.
Can you not contact the exchange admin and ask to see the error log? is it a work or hosted exchange server(2003 or 2007)?
How about a hard reset? extreme you might say but can help.
pcibob said:
Have searched the Diamond Forum extensively, but not found mention of this problem.
My Exchange E-Mail from WM6.1 refuses to download (or at least open) attachments. This happens with .doc .docx .pdf .xls .xlsx attachments. These attachments open without a problem, when I use another two e-mail accounts using imap, the problem only occurs when synchronising with my Exchange Server.
It looks as if the attachment is being downloaded, but it doesn't then open. I have posted this on the Vodafone Forum (post 50578 and update 135471), and one other person reported the same problem, but no solutions were forthcoming. I have just installed the latest ROM, without effect.
Any suggestions ?
Rom Version : 1.97.161.4 WW
Rom Date : 10/26/08
Radio version : 1.08.25.08
Protocol version 52.44.25.24U
Click to expand...
Click to collapse
Sounds like an exchange server problem. You should contact your exchange admin to see if they can change any policies related to that.
Thanks for the responses.
I AM The Exchange Adminstrator ! I don't think the problem lies there, as e-mail sent to my previous PDA (Vodafone 1605),and e-mails still sent to one of my colleagues 1605 don't demonstrate the same problem. The problem is only rpesent on the Diamond.
I have also tried several hard resets, together with a ROM Flash Updates, to no avail.
Regards
Process of elimination
As you tried hard resets and other roms it might be a network issue?
Why not try using a trial on 4smartphone.com (14 days free) and if that works then you no its not the device.
Have you even tried a different SIM card?
What version of Exchange are you running? 2k7 can control the size and amount of mail you're retrieving via EAS policy, plus if you can download attachments or not.
Then again, since you're ok with EAS on a tytn, then it must be the phone or network. Have you tried swapping SIMs to eliminate the possibility of content filtering on the network side?
I've never had any trouble with EAS and I've tried plenty of other ROMs, and I'm the vodafone network also - you tried any of the newer custom ROMs to eliminate that?
We are running SBS2003 Premium SP2, and Exchange Reports Version 6.5.7638.1
I have tried the SIM from the TyTn that downloads ok in that PDA, it doesn't in the Diamond.
I have the latest official ROM from the Vodafone website, don't really want to upgrade with unofficial ROM's in case I brick the phone.
Just as an update, by watching carefully as the phone tries to collect the Attachment, the initial message "Downloading..." is temporarily followed by "Loading Message ...", which quickly dissappears, and the logo against the attachment changes back from the green download arrow to the grey logo.
pcibob said:
We are running SBS2003 Premium SP2, and Exchange Reports Version 6.5.7638.1
I have tried the SIM from the TyTn that downloads ok in that PDA, it doesn't in the Diamond.
I have the latest official ROM from the Vodafone website, don't really want to upgrade with unofficial ROM's in case I brick the phone.
Just as an update, by watching carefully as the phone tries to collect the Attachment, the initial message "Downloading..." is temporarily followed by "Loading Message ...", which quickly dissappears, and the logo against the attachment changes back from the green download arrow to the grey logo.
Click to expand...
Click to collapse
Hi
in the email sync options do you have the "include file attatchments" ticked?
ekksman said:
Hi
in the email sync options do you have the "include file attatchments" ticked?
Click to expand...
Click to collapse
I don't have that ticked and I still get attachments - i think this option is for downloading the file instead of clicking on it later.
@pcibob
I know some Vodafone ROMS are buggy. for example my friend has an X1 for which he uses M$ Live - MSN etc. if he installs TomTom the the MSN live stops working - how wierd is that.
Take the blunge and customise your ROM it is really stright forward, this may help.
It doesn't matter if this is ticked or not (I have tried both). I understand this tick means that the attachment will be dowloaded WITH the mail, whilst if it is unticked it should be able to download the Attachment AFTER the mail, if required. Both don't work !
pcibob said:
It doesn't matter if this is ticked or not (I have tried both). I understand this tick means that the attachment will be dowloaded WITH the mail, whilst if it is unticked it should be able to download the Attachment AFTER the mail, if required. Both don't work !
Click to expand...
Click to collapse
Was asking as I had the same problem with another device and only work around I found was to have it unticked, tap onto attatchment to download, go to comm manager turn flight mode on and off and it would download, strange but it worked. not sure would do the same for you, sorry if it doesnt
ekksman said:
Was asking as I had the same problem with another device and only work around I found was to have it unticked, tap onto attatchment to download, go to comm manager turn flight mode on and off and it would download, strange but it worked. not sure would do the same for you, sorry if it doesnt
Click to expand...
Click to collapse
Thanks for the suggestion, but tried it with no joy.
I am seriously considering updating the ROM with a non Vodafone version. Any suggestions as to which ROM to try ? I would like to hear from other Vodafone Users if this has caused them any problems. I am a bit nervous about bricking the phone.
GO and Update
pcibob said:
Thanks for the suggestion, but tried it with no joy.
I am seriously considering updating the ROM with a non Vodafone version. Any suggestions as to which ROM to try ? I would like to hear from other Vodafone Users if this has caused them any problems. I am a bit nervous about bricking the phone.
Click to expand...
Click to collapse
I would go for this option.
There is plenty of help here if you need it.
I have flashed at least 15 diamonds fro my work and countless other devices. Now if I can do it .
1) install Olipro Hard-spl.1.93 Download and extract , click on RUU - follow instructions - when confirmed an application wants to run on your device. (click YES to allow) this process takes a few MINS and the screen goes blank for a while. Do not touch device until the RUU states finished (the phone should restart anyway)
2) if you wish to confirm the installation of Hard-SPL the hold down the down-arrow volume key during reset or start-up process, you should be presented with a RGB and white screen with
"DIAM100"
"SPL_1.93. Olinex
(thats Olipro and Cmonex-combined forum users)
Thats confirmation enough.
3) restart device again. and pick a ROM (Recommendation from me would be this Shaks1979 ROM (download and extract - Run RUU) similar to step one.
4) restart your phone and enjoy life without the vodafone poop. hopefully you exchange will work.
4a) its very easy to revert back to standard stuff
Take the plunge.........
R3PUBL1K said:
I would go for this option.
There is plenty of help here if you need it.
I have flashed at least 15 diamonds fro my work and countless other devices. Now if I can do it .
.........
Click to expand...
Click to collapse
You are tempting me.
One final question. Will the Vodafone Sat-Nav reload and work ? I have it in a CAB file, but am unsure if it needs to 'see' the Vodafone ROM to work. Has anyone else installed a new ROM, then put their Vodafone Sat-Nav back on successfully?
The main reason I bought the Diamond is that it converged the things I need most i.e phone, Sat-Nav, PDA and camera.
Thanks for the help
Hi,
My problems is in downloading... When I try to download something from marketplace I get information:"Can`t get this info right now. Check back in a little while." I have that information since I input activation key. Can someby tell why I have that error?
Second issue is in zune when I want to sync my device some window is opening with terms agreement. When I click on I accept button I have another error and I can't sync my device...
In both issue I try everything. Maybe is something in setting in my HD2?
please help
I have the same issue with Marketplace. Not sure why dough....yet
yeah same issue here too. just market place one though.
daz990 said:
yeah same issue here too. just market place one though.
Click to expand...
Click to collapse
You havent done the reg hack to make the market think your HD2 is an HD7. If you dont do that, it wont work.
I think i did the reg hack messed about so much cant remember if i have or not lol
spbeeking said:
You havent done the reg hack to make the market think your HD2 is an HD7. If you dont do that, it wont work.
Click to expand...
Click to collapse
...and you also need to set your Windows Live account location to a country where Marketplace is supported (eg. US, UK, etc.).
I also had the same issue and I solved it by creating a new Live account, setting the location to US and confirming my e-mail address.
Good luck!
antaed
can someone post the reg hack thread link my dumb ass can't find it. cheers
Phone name
My phone name now is "HTC HD7 T9292". Is it ok??
If not tell me how I can change it ?
It should be OK. Problem is, when it says that its LEO07.
Make sure that you have "cookies enabled" on your browser. I had problems downloading apps and for some reason cookies were disabled. Once enabled all was ok again.
ericwa said:
Make sure that you have "cookies enabled" on your browser. I had problems downloading apps and for some reason cookies were disabled. Once enabled all was ok again.
Click to expand...
Click to collapse
I have enable cookies and still have the same problem...
chumaj001 said:
It should be OK. Problem is, when it says that its LEO07.
Click to expand...
Click to collapse
mine is still leo07 done the hack but it's not showing up as hd7 HELP!!!
Hi
Probably is no anwser for this problem.
I install ChevronWP7, before had the validation code, but after one or two day can´t access to Chevron:
Sorry, I'm having a trouble communication with phone:
-Please make sure it's connecting with USB
-Please start Zune aplicação
Inside Marketplace, have the some problem when click Install Button:
-WP7 can't get this info right now. Check back in a little while
I have a HD2 with WP7, with English OS, but i live in Portugal. My Zune say Leo07, is it the problem?
I access to marketplace with 3G or wi-fi without conection to PC(zune).
Today i call to Portugal Microsoft but he don't no the answer for my Marketplace access problem. He mail me with some contacts support:
https://emea.microsoftstore.com/europe/en-US/Contact-Us
Waiting for good news
Guys! Just carefully make this steps: http://forum.xda-developers.com/showthread.php?t=912218
It's working!
I'll try to help you.
W razie czego pisz jak czegoś nie będziesz mógł ugryźć.
grzesm said:
Guys! Just carefully make this steps: http://forum.xda-developers.com/showthread.php?t=912218
It's working!
I'll try to help you.
W razie czego pisz jak czegoś nie będziesz mógł ugryźć.
Click to expand...
Click to collapse
Thanks for the help, that is the guide I followed. I just cannot get phone name to become hd7 still leo 70 have activation code just keep getting check back later when trying to download from marketplace. Any ideas?
If it's still leo70 you must make all steps starting from 1. Download XBMOD Deployer.
Did you copy file from the file in /My Documents/My Ringtones/ to /Windows/ , overwrite if asked? And maybe you can't find it here?
Guys I believe that if you tried to access Marketplace before doing the reg hack then you may have no option other than to reflash your phone with WP7 and start again.
Read this thread and you should have live services up and running
http://forum.xda-developers.com/showthread.php?t=912218
I've tried access to Market befor hacking and after that I made all steps and Market works.