hi,
I have aRaGoN's ROM with sense and I can't turn on the wifi. Can someone please step by step how to do it? It is strange, it is turned on, but arrows moving and then suddenly disappear. If someone could make a short tutorial video I would be thankful.
I have searched on youtube, but without luck
yaro666 said:
hi,
I have aRaGoN's ROM with sense and I can't turn on the wifi. Can someone please step by step how to do it? It is strange, it is turned on, but arrows moving and then suddenly disappear. If someone could make a short tutorial video I would be thankful.
I have searched on youtube, but without luck
Click to expand...
Click to collapse
You need to use the toshiba settings not the HTC one in comm manager, or try this:
Go to key in registy "HKLM\Software\Drivers\WLAN" and copy the value from 'AdapterName" string. Now go to key in registry "HKLM\Software\HTC\CommManager\WLAN" and edit "DeviceName" string. You see there value like this: "{98C5250D-C29A-4985-AE5F-AFE5367E5006}\TNETW12511". Delete the last part of this value ("TNETW12511") and past the value "AdapterName" which you copy at end. Make soft reset and that is all. Now Wifi button on your device should work properly.
You should search this site as you will find the answer to most questions here. YouTube won't be much help for something this specialist.
Related
Hello everyone,
I need help with a reg key that i am tring to do. I have checked but not found anything to do with the gps.
I am trying to see if i can make a reg key that can be done from the e_rom that will put in my gpd pair info, so i dont have to set it up everytime i do a hard reset!
I did try doing it by coping the reg key from when i have set it up the correct way but when i blank it out and enter the info again it does not do anything.
Reg key that i did was found in
Code:
[B][COLOR="Red"]DELETED[/COLOR][/B]
Update
Dang i think i just found my answer just looked at
HKLM\SOFTWARE\Microsoft\Bluetooth\Serial\
Well i will try this when i get home, but if anyone reads this can you confirm that this will work!!!
Man finding things out for your self is so much fun!!! Till I was writing this i did not know what i was doing wrong!!! (That is if I was doing it wrong!!!)
Merci
Does anyone know if this would work
Well i got it to work, so now I have a cab file that sets up my BT GPS unit without me doing anything!!!
Maybe not a big thing but its a start, does anyone have any other small things like this, cus I am learning and would like to try something different!!!
This is what i used to make the reg
DELETED
Click to expand...
Click to collapse
DELETED
Click to expand...
Click to collapse
Here is your best bet on what to do.. start with a fresh install where you have paired nothing.. then use an app such as TRE and export the registry. Then pair your device, after pairing turn your BT off and soft reset. After the phone comes back up do another reg export with TRE. Then go download a trial version of Registry Workshop and this app will let you put your 2 exports in there and it will do a comparison and tell you what keys changed. Then you can take these changed keys and make yourself a cab
CLOSED, DUE TO IT NOT WORKING
Hello all,
I have searched & searched. I've read the Wiki and found the info there, more than once. I'm just not "techie" and need more details. I absolutely hate the loud startup sound on the AT&T 8525 that came on my new phone.
I downloaded the Resco trial and I've spent hours trying to find the correct file to "fix" but I just haven't been able to find it. I also like the animation, just not the sound. It looks like just adjust the WAV file, when I finally find it on my phone?
Sorry, but any additional help (Step by Step if possible) you can give me would be greatly appreciated. This sound is driving me & my husband nuts.
After much searching and many hours, the Voice Command works great! Very pleased with that, this forum is awesome.
MsGadget
I assume you are referring to the following?:
Disable/change the startup animation or sound
HKLM\SOFTWARE\HTC\StartupAnimationEnabled - change from 1 to 0 to turn everything off and permanently fix the volume issue.
HKLM\SOFTWARE\HTC\StartupAnimationVolumn - change from 16 to 200 (higher number = lower volume) to lower the volume to a whisper but keep the animation.
You can also customize the animated boot up by deleting or changing 2 keys. (Doing this does not fix the volume issue)
Delete the WAVFile Key to remove the sound only.
Delete the GIFFile Key to remove the animation only.
Put your own .GIF file or .WAV file on the phone and rewrite the 2 keys (WAVFile GIFFile) to the new file location. i.e. \My Documents\Files\CustomAnimation.gif
It will help us to know where you are getting stuck.
Can you find thw key HKLM\SOFTWARE\HTC\StartupAnimation using Resco?
Mike
That's what I found, but I can't find the file to change in Resco. I tried to do a search in Resco for the file, but no luck. What does it mean by doesn't fix volume issues?
Sorry, but I've been reading & searching for 3 days now. I'm not the least bit techie, but I love my gadgets!
Thank you!
msgadget said:
That's what I found, but I can't find the file to change in Resco. I tried to do a search in Resco for the file, but no luck. What does it mean by doesn't fix volume issues?
Sorry, but I've been reading & searching for 3 days now. I'm not the least bit techie, but I love my gadgets!
Thank you!
Click to expand...
Click to collapse
Ok. One step at a time perhaps.
First you are not using Resco to look for a file but an entry(s) in the Registry. So the first thing to do is to go into Resco and look through the menus for something like "Edit the Registry". I use PHM registry Editor so I'm not sure what menu it's in but it will be in the Resco menus somewhere.
Mike
Download total commander, its free and I know for sure it works.
HKLM is the area of the registry, SOFTWARE is the folder, HTC the next folder and then look for StartupAnimationEnabled
Change the value from 1 to 0, then put the device into sleep for 15 seconds (hit the power button, but dont turn it off) and then do a soft reset.
When it reboots, it will be the way you want it.
HKLM\SOFTWARE\HTC\StartupAnimationEnabled - change from 1 to 0 to turn everything off and permanently fix the volume issue
Thank you both very much. I'll work on it again when I get home. Wish me luck. Thank goodness for Sprite backup.
Mona
mikechannon & teknics,
I'm so happy, I got it to work. Your step-by-step instructions were very clear. I greatly appreciate both of you taking the time to share the basics of how & where to start.
Most others in this type of forum probably know where to begin, but I really needed the very basics. The knowledge you provided is very valuable!
Thanks again,
MsGadget
Pleased you got it to work - future registry changes will be a piece of cake
Mike
Agreed!
Not a problem, that's why we are all here right?
If I press wlan button in Comm Manager than WiFi should be ON but it is not. I did use some different roms but still nothing. Somebody know what to do ?
settings-connections-wireless lan - there is only message:
Wireless LAN is OFF.Turn on Wireless LAN.
It does not work. Please help me.
Go back to wm5. If your lucky it might come back. The more I dig through here the more I see people with wifi problems after flashing. You might be out of luck
HOWEVER
I noticed under WM6 the bubble that pops up when you click on the wifi tower ALWAYS says 'turn on wifi'
Good luck!
Same problem with my WI-FI, Not working please help!!!!
Hi All. I am facing the same problem with my WI-FI as Vomithaus is having. Whenever I try to to connect to WIFI from Commmanager, it tries to and then to show disconnected. When i go to settings> Wireless LAN, it asks me to "Configure Network Adaptors", and lists all the adaptors and going into them asks about the ip settings and stuff like that. By the Way I Bricked my phone once and then i flashed with T-Mobile Ship WM6.0 RUU for the WING. And I strongly suspect that the registry setting are not right or the Radio ROM is F***ed up. Can any knowledgeable person help me please? I would greatly appreciated any help.
Same problem with my WI-FI, Not working please help!!!!
This is the addeneum to the last post. The last remaining screenshot for the above post. The last screen shot of the "Wi-Fi Status" in the "Settings > Connection", gives me an option to "Turn on Wi-Fi" but toggeling it results in nothing. Thank You everybody for your time and consideration.
It might help us to figure out how this happened too. I bought the EXEC off of ebay and it was like this from the get go. The previous owner flashed it to wm6 about 1 month ago, but said it was working fine... all he did was hard reset to get rid of the personal information. I want to believe him, but there are a few people on here complaining of flashing the exec and losing wifi. (even the official rom from O2).
Flashing COULD have damaged the transmitter, but it seems more likely that a setting is wrong somewhere (especially since there is a slider bar for WIFI battery vs performance).
This is good news (somewhat), but the bad news is that if there is one, no one knows about it. I have messed around in the registry (there were some promising entries related to POWER), but nothing that even showed a response. I found the entry that connects to the slider bar, but PERFORMANCE = zero, so there is nowhere to go there but WORSE.
This really sucks, is all I can say. I blew $500 on something that is useless (well... not useless, but no WIFI? WHY COULD IT HAVE NOT BEEN BLUETOOTH!)
Another step I have taken is contacting PPC Tech's via email and asking them if they have any idea how to repair it, and how much $$$
I'll keep you informed.
Can you tell me if yours EVER worked, and if so, when it stopped?
I just looked closer at your screenshots.... Do you have a WIFI card? (it say's 'adapter').
No, I dont have a WIFI card but this is way how windows handles all is peripherals (services), as an add-on card. just like you laptop.
Guys, There is a registry fix for this problem.
Please take look here :
http://forum.xda-developers.com/showpost.php?p=1475527&postcount=14
Ron
I am afraid Ron that this is not a case as suggested in Beowulf6's solution. If it is the solution I dont know how to exactly implement it. But I am posting here the exact registry key screenshot for you guys to take a look also. I can't see and TNETWLN1 or TNET12345 key here in my device. I still think it has to something with the registry. Can any one here with a T-Mobile WING verify and post their screen shot? or maybe send me a registry backup to compare with? It would be really grateful it some does that. Thanks everybody for a few seconds to read this.
In my herald i can't see TNETWLN1 or TNETWLN12345 too.
I did use Mobile Registry Editor for that , what you guys are useing?
(sorry for my English, if you dont understand me just tell me please)
Look at the screenshots, there a Reg Folder with the name WLAN, open it, and then open the key with all the numbers and letters. At the end of that line is a code. TNETWLAN1 is what it should be for the Herald.
f_v_man said:
I am afraid Ron that this is not a case as suggested in Beowulf6's solution. If it is the solution I dont know how to exactly implement it. But I am posting here the exact registry key screenshot for you guys to take a look also. I can't see and TNETWLN1 or TNET12345 key here in my device. I still think it has to something with the registry. Can any one here with a T-Mobile WING verify and post their screen shot? or maybe send me a registry backup to compare with? It would be really grateful it some does that. Thanks everybody for a few seconds to read this.
Click to expand...
Click to collapse
It is like Bio88 says.
You are already on the right track... click on WLAN and you will find the key.
Change the value of the key into TNETWLAN1
Done
bio88 said:
Look at the screenshots, there a Reg Folder with the name WLAN, open it, and then open the key with all the numbers and letters. At the end of that line is a code. TNETWLAN1 is what it should be for the Herald.
Click to expand...
Click to collapse
Hi Please look at my screen shot again clearly. I did post what is inside the WLAN folder. There are only two keys :
1) (Default) \Windows\ctlpnl.exe
2) CmdLine cplmain17
I still can't figure where is the key with numbers and letters. Sorry If I am a bit dumb or wrong. Thanks.
it is possible if you use the default Commanager that you dont have this registry key.
I dont know if it helps if you create it on your own.
but for me where i installed a different commanager, the Key was there and i edited it for the wlan button.
My Tmo Wing has "TIACXWLN1" in that registry key.
Do those changes apply to the herald and the Wing interchangeably?
I bought a second hand HTC P4350 off eBay. As soon as I received it, I registered it with HTC eClub and downloaded the Windows Mobile 6 upgrade. The upgrade process was flawless.
The problem is that Wi-Fi is not working. I press the button on the right, the comm. Manager appears, and there’s an “X” over the Wi-Fi icon. I click on it, the round color circle appears for a few seconds, and then it goes away, and there’s still an “X” on the Wi-Fi icon.
So I tried it differently. I went to “Start >Settings>Wireless Lan> Turn on Wireless LAN” but nothing happens.
What could be the problem here?
Thanks.
Ok, try this: http://forum.xda-developers.com/showthread.php?t=326655
Step 2: (Fixing WLAN button malfunction, somehow it doesn’t work by default on Wing): **Thanks for beowulf6’s post for this fix.
Change "HKEY_LOCAL_MACHINE \SOFTWARE \HTC \CommManager \WLAN= "Windows WLanMgr.exe " "DeviceName" = "{98C5250D-C29A-4985-AE5F-AFE5367E5006} TNETW12345"
the end of this long String is the WLAN-Adaptername of the Device.
just change in this Example "TNETW12345" into "TNETWLN1"
-Step 3: (Fixing Wi-Fi setting launch issue) **Thanks for phatman81’s post for this fix.
Change "HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN\ Default:"
\Windows\WlanMgr.exe --> \Windows\ctlpnl.exe
Good luck
Tried it, not working
Any more suggestions?
-Step 3: (Fixing Wi-Fi setting launch issue) **Thanks for phatman81’s post for this fix.
Change "HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\W LAN\ Default:"
\Windows\WlanMgr.exe --> \Windows\ctlpnl.exe
On the last line instead of ctlpnl.exe put WLANSettings
That should do the trick. You will need to click on left soft button on Menu to access your Network Configuration screen! Good luck!
Ok, now I can see the WIFI settings, but as for changing "TNETW12345" into "TNETWLN1", my P4350 says "TIACXWLN1". SHould I change anything there?
Thanks
Hi,
It seems like I have this problem to.
When I go to Connmanager and tap my Wifi button, it starts to scan but eventually it wil not start. The Wifi icon still has a red cross in it.
I have tried every way but my Wifi wont start.
I have searched for the registry strings above, but cant find them.
So my question is if someone knows which string enables you Wifi adapter....
I have the P4350 With WM6. No extras installed. I use the HERALD-USPL-beta3full
Pleas anybody help me otherwise ill have to send it back....
The problem is that i cant find the specified keys above... In HKEY_LOCAL_MACHINE \SOFTWARE \HTC \CommManager
is no Wlan folder, and no defined strings......
i changes all that on mine and it still does not work
I'm having this same problem with my wi-fi.
It has started when I tried to change my official version of p4350's WM to the one with the TOUCH's Cube and touchflo posted in this tread: http://forum.xda-developers.com/showthread.php?t=345347&highlight=cube+p4350
I heard that Touch duo don't have wi-fi, and I'm affraid that this could have removed my "Sdio Wlan" driver from my p4350.
I've made a hard reset, and installed the official WM for my phone, but it still not working the wi-fi.
Please, someone can help us? Cause it's really sad to loose that funcionality on the device.
Could it be just a reenstalation of the SDIO WLAN driver? If yes, how to do this?
Can anybody pleas tel me where the registry keys for WIFI are..?
If I know where to look than ill try to find the answer my self. But i cant find the correct keys and values.
If i find out, then ill post the solution right away.!
I have the same problem with the wifi, I press the button on the right, the comm. Manager appears, and there’s an “X” over the Wi-Fi icon. I click on it, the round color circle appears for a few seconds, and then it goes away, and there’s still an “X” on the Wi-Fi icon.I tried to solve the problem with the registry keys, but nothing happens. what can i do? are there drivers for wifi to install on the pocket pc...thanks in advanced.
Hi,
I have exactly the same problem.
When i go into the registry path:
HKEY_LOCAL_MACHINE \SOFTWARE \HTC \CommManager
I do not have a WLAN folder.
So i cannot change any registry settings related to WLAN.
I did a fresh install of WM6 from the HTC website and do not have any programs or apps loaded on it besides my registry edit application.
When i go to Configure Network Adaptors, i can see teh SDIO WLAN Wireless adapter and i can change the ip address settings, just to check and see if it works.
Please help me!!!
Wifi doesn't start
I got the same Trouble with my HTC and it is nor possible to fix it OR ?
Daniel.
same problem
i have the same problme
after flashing the Rom with the touch FLO and after tht wifi is not working
can somebody help me out
i will donate him for sure!!!
Wifi Drivers
Good Question About Reinstalling The Drivers For Herald/tmobile Wing.
If There Is Where Can I Dl It
WIFI not working
Maxmatta did you get this problem sorted I had gone and done the same. Will you please assist me in solving this problem.
maxmatta said:
I'm having this same problem with my wi-fi.
It has started when I tried to change my official version of p4350's WM to the one with the TOUCH's Cube and touchflo posted in this tread: http://forum.xda-developers.com/showthread.php?t=345347&highlight=cube+p4350
I heard that Touch duo don't have wi-fi, and I'm affraid that this could have removed my "Sdio Wlan" driver from my p4350.
I've made a hard reset, and installed the official WM for my phone, but it still not working the wi-fi.
Please, someone can help us? Cause it's really sad to loose that funcionality on the device.
Could it be just a reenstalation of the SDIO WLAN driver? If yes, how to do this?
Click to expand...
Click to collapse
Decon did you get the wifi sorted on your devise am sitting with the same problem please assist
HELP!
I know, this is an old thread, but its really important for me...
Is there no way to enable wi-fi again on the phone?
It is really impossible to re-install the wi-fi driver for the phone...
can nobody help me out?
daffies said:
Hi,
I have exactly the same problem.
When i go into the registry path:
HKEY_LOCAL_MACHINE \SOFTWARE \HTC \CommManager
I do not have a WLAN folder.
So i cannot change any registry settings related to WLAN.
I did a fresh install of WM6 from the HTC website and do not have any programs or apps loaded on it besides my registry edit application.
When i go to Configure Network Adaptors, i can see teh SDIO WLAN Wireless adapter and i can change the ip address settings, just to check and see if it works.
Please help me!!!
Click to expand...
Click to collapse
I know I'm digging up a old folder, but I have the same no wlan folder issue.
I recently discovered this site and decided to upgrade my t-mobile wing... I chose the touch-it 2.3 rom that TylerC put in his upgrading kit... The phone seems to operate fine with the exception of when I'm using my bluetooth headset. The headset works however I'm no longer able to simply press the button and say who i wanna call, like the voice dial is messed up. Now before I posted this I searched the forums high and low for a solution and the only thing i could find I thought would save me but it didn't...
Here's what I found...
mrmikemcguire said:
Ok so I was having the same issues. My bluethooth was not being initiated by the button on the earbud. This was from another thread, I did it and it works fine now. Hope it helps........
Originally Posted by nextpimp
My Contribution....Since people dont want to find it out their own.... Voice Speed dial Over Bluetooth ...
1 Use registry editor to edit the following entries on your Wing:
Under: \HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\A udioGateway\, Modify Value data: OEMAGEX.dll to BTAGExtModule.dll
Under: \HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\, Add DWord Value: LaunchAPEnable, Value Data: 1
Under: \HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\, Add DWord Value: VoiceCmdEnable",Value Data: 0
2. Wait about 30 sec, then soft-reset
Itje ... Awesome Rom... All I gotta do now is unmap Voice Command from the hold funtion on button five.... Its not listening to me in the settings so gotta go to the reg... Help would be appreciated as the registry really isnt my strong point.
Click to expand...
Click to collapse
I tried that and nothing happened so if anyone knows how to solve this issue I would greatly appreciate the help..
Thanks,
Greg
try to "power cicle" -- hold power button for 3sec and select "yes"
of course after you made the changings....
use totalcommander or else to edit
tried that and still no success... anyone else??